I recently purchased an Unlocked HTC touch pro 2 (obviously), but when I flashed a new rom, Jackos and Energy's, i can't get the phone to retrieve a signal. Where I live there is only Edge network but it won't even pick up that. the radio is fine and the connection settings are fine, just won't get a signal. The Rhodium version is RHOD*** is what the bootloader says. Please any help to fix this would be appreciated. Thank you for your time and have a nice day
RedWolf023 said:
I recently purchased an Unlocked HTC touch pro 2 (obviously), but when I flashed a new rom, Jackos and Energy's, i can't get the phone to retrieve a signal. Where I live there is only Edge network but it won't even pick up that. the radio is fine and the connection settings are fine, just won't get a signal. The Rhodium version is RHOD*** is what the bootloader says. Please any help to fix this would be appreciated. Thank you for your time and have a nice day
Click to expand...
Click to collapse
Does it really show you the three asterisks, or did you add that in there? That's the device model number, which would be helpful to us in addressing your issue.
That is actually what is shows me. I found out recently that I need a Tilt2 motherboard and antenna module for this phone to work here.
Related
I recently purchased htc dopod s900c i live in the states at&t is wireless provider i'm really confuse like what place or model would i seek a rom under? also i'm not able to get my data working on this phone it connect to cingular i'm thinking it could be a problem. where my sim is at&t 3g. other thing i'm confused about i notice you guys refer models as exsample p3700 i've check under my battery i don't see it listen i see s/n mp19825n5317330 so i'm also wonder about gps does it work like a blackberyy buit in gps? purchased from china grab advertized says free map well where at LOL? so if someone can shed some light is there a rom i can download to fix data when i've gone on htc site it doesn't accept my serial number other wise the phone works great
pda version v03.06.00
pda build s0907141812(1.10
stack v02.42
radioversion 1.3
radio package 2.2
Hi
Go there http://forum.xda-developers.com/index.php scroll down until you find your device and ask in the appropriate forum
Good luck
I bought an unlocked HTC touch pro 2 that was with T-mobile.
I have AT&T. My phone works good for calls and text messaging but the data plan does not work.
I called AT&T and they cant help me.
I called HTC..can't help me.
They both said to call T-Mobile and ask them to reset the data options because my phone is trying to read off of the T-mobile options but what that amounts to is that they just don't know what they are talking about.
My friend said this site will have the answer!
Can anyone..please..point me in the right direction on how to set up my phone so I can use the data plan for AT&T or am I screwed??
I am new at this so I don't understand the lingo but..do I need to flash a rom on my phone to kind of wipe it clean of T-Mobile and start fresh or what??
Please help me!!
Ok...I have done some digging on this site and I just wanna be clear. It looks like my phone wont work with the 3g network...and I'm ok with that...but my phone has NO internet at all and thats what I'm trying to fix.It also looks like I can fix my problem...just need a push in the right direction..please??
http://www.howardforums.com/showthread.php?t=1277773
If you flash a new ROM, they all come with a little program that runs in the begining to provision the phone with this info... Might be easier....
ok..thanks alot..i have the internet now.
one problem..those instructions don't help me with sending or recieving picture messages. I can't follow them to get me to where it fixes that for an htc touch pro 2...any ideas?
Are you looking in the registry at your arcsoft settings?
beeobee1 said:
I bought an unlocked HTC touch pro 2 that was with T-mobile.
I have AT&T. My phone works good for calls and text messaging but the data plan does not work.
I called AT&T and they cant help me.
I called HTC..can't help me.
They both said to call T-Mobile and ask them to reset the data options because my phone is trying to read off of the T-mobile options but what that amounts to is that they just don't know what they are talking about.
My friend said this site will have the answer!
Can anyone..please..point me in the right direction on how to set up my phone so I can use the data plan for AT&T or am I screwed??
I am new at this so I don't understand the lingo but..do I need to flash a rom on my phone to kind of wipe it clean of T-Mobile and start fresh or what??
Please help me!!
Click to expand...
Click to collapse
My understanding is that the T-Mobile phone has different hardware modem. It will not work with the AT & T 3G network. Sorry, there is no way I know of to fix this. The two carriers use different technology for 3G.
However, it should work with the EDGE network on AT&T. You will need tech support from AT&T - ask them what settings need to be entered in the connection manager to get the device to work with EDGE. Your phone has settings for "T-Mobile Data" in the Comm Manager. You need to delete that and enter the AT&T settings.
Also, VERY IMPORTANT, you need to go to the phone screen (where you dial calls), bring up the options, and set it to operate ONLY on 2G networks. Otherwise I think the T-Mobile 3G modem may interfere with your EDGE data.
BTW, have you asked T-Mobile about getting a Tilt 2? This is the same phone. You could resell your unlocked T-Mobile TP2 on ebay and recoup a lot of the costs. This would be the best option, since you could then get 3G coverage.
sphinx88 said:
If you flash a new ROM, they all come with a little program that runs in the begining to provision the phone with this info... Might be easier....
Click to expand...
Click to collapse
I would like to do this then...any suggestions on which rom i should use and how to do it..i appreciate all the help
all custom roms should have a provision cab or program. You will need to unlock your phone first. Look in the rom dev section
That's how it can be described, I apologize in advance for the somewhat repeat of the thread (posted over in the Touch Pro 2 CDMA hood) because my TP2 is the verizon version. BUT it's GSM unlocked and I am running with Simple Mobile. I have no problem inputting the settings for the connection... their website has all the info right there. I reboot and everything seems fine and dandy or so I think.
I can send 50% of the time, and receiving I can do only once. Meaning I can receive one MMS and I have that issue where the picture is small. Anything after that gives me an error saying "bad gateway" and then I think I hear it laughing at me. It doesn't matter which ROM I am using. Energy, Blackout, try cooking my own, the stock VZW one... I only use the CDMA ROMS given the phone is CDMA.
Only posting over here due to the fact I am rolling with a GSM carrier. Hence a trainwreck.
Just came to mind, is it possible to experiment with the T-Mobile Touch Pro 2 stock Arcsoft MMS, would need a link to it. Been searching high and low but no luck. Any info to help resolve this issue would be awesome.
I appreciate XDA and all here, this place ROCKS!
Something really weird is going on with my At&t galaxy s3. I'm new to this forum so I'll just explain what I'm experiencing and do my best to work through it will all of you. This phone got rooted by someone else and when I got it, the rooted program was in chinese and was acting all weird and wasn't getting good reception, although it was before it was rooted. I flashed it back to normal and it's acting very curious. It will receive an At&t simcard but the service bars will go from 1 bar to 4g to Edge to 1 bar all in a matter of 20 seconds or so and doesn't seem to work. It will occasionally work to send messages, make calls, but it seems like it can't ever receive calls. I checked and the IMEI number is still the same. Also, I had originally tried to unlock it to another carrier and when I put in different simcards (From other carriers such as verizon) the service bars don't show up, instead, all it shows is a cancel sign and doesn't ask for an activation code or anything. I'm honestly not sure what to do here, I thought I had broken the simcard reader and replaced that, but that made no difference. I'd greatly appreciate any help. Thanks!
StookDog said:
Something really weird is going on with my At&t galaxy s3. I'm new to this forum so I'll just explain what I'm experiencing and do my best to work through it will all of you. This phone got rooted by someone else and when I got it, the rooted program was in chinese and was acting all weird and wasn't getting good reception, although it was before it was rooted. I flashed it back to normal and it's acting very curious. It will receive an At&t simcard but the service bars will go from 1 bar to 4g to Edge to 1 bar all in a matter of 20 seconds or so and doesn't seem to work. It will occasionally work to send messages, make calls, but it seems like it can't ever receive calls. I checked and the IMEI number is still the same. Also, I had originally tried to unlock it to another carrier and when I put in different simcards (From other carriers such as verizon) the service bars don't show up, instead, all it shows is a cancel sign and doesn't ask for an activation code or anything. I'm honestly not sure what to do here, I thought I had broken the simcard reader and replaced that, but that made no difference. I'd greatly appreciate any help. Thanks!
Click to expand...
Click to collapse
Unlock is supposed to be permanent so it's odd that you lost it.
Now as for your problem, a lot of people are getting this issue lately, where unlocking damages their nv file. The solution can be found here: http://forum.xda-developers.com/showpost.php?p=43842387
BWolf56 said:
Unlock is supposed to be permanent so it's odd that you lost it.
Now as for your problem, a lot of people are getting this issue lately, where unlocking damages their nv file. The solution can be found here: http://forum.xda-developers.com/showpost.php?p=43842387
Click to expand...
Click to collapse
Thanks for your quick response I have been looking for a long time and never saw this issue before. I'm not sure where I'll be able to find a replacement nv file...but i'll see if anyone I know has a galaxy s3 from at&t. Maybe once I do this the unlock issue won't be messed up anymore.
[Q] Radio and OpenDSP have "INVALID-VER-INFO" beside them. Is this normal? Need help
I just recently purchased the m8. I did lots of research learning everything I could before doing any modding. So today I decided to unlock my boot-loader so it was my first time getting into recovery. But when I get into recovery I see both radio and OpenDSP have "INVALID-VER-INFO" beside them. Its never been modified and I got it from t mobile and was the first to open the device. Not a second hand phone. Is this normal? I've been googling for hours and cant find any information. Its been sort of difficult getting any help in the Tmobile htc M8 help threads. If anyone can shed any information I would greatly appreciate it. I haven't noticed any thing wrong with my phone out of the box and everything about the functionality of the phone has been stellar.
if everything works as normal, why would you worry about this?
call you carriers tech support and ask them
wase4711 said:
if everything works as normal, why would you worry about this?
call you carriers tech support and ask them
Click to expand...
Click to collapse
I did that already. They advised me to get it exchanged since I'm within 14 days. Got a new one and it was fine at the store no "invalid" next to both. Got home and double checked it. New device same message again. I'm keeping this one as its running fine. But I want to know why it's saying that.