Related
Try to flash to JH2 (and repartition 512) - the stock B model firmware.
If it fails - try to push one of complete roms (doc_kalpik) and install it using clockwork.
Otherwise have no idea what is wrong.
.....
I will download the firmware files now,
any instructions on how to use clockwork? and install the complete rom?
Did you perform a repartition when you reflashed ?
ignore me wrong thread!
inshadesofgrey said:
I will download the firmware files now,
any instructions on how to use clockwork? and install the complete rom?
Click to expand...
Click to collapse
isnt there a install guide in doc-kaplik topic? In clockwork (might need to push update.zip and rom manually - dont remember how) choose install zip from sdcard and navigate to file you need.
i did......still didnt work
Sounds like what mine was doing when the internal SD died.
dupel said:
isnt there a install guide in doc-kaplik topic? In clockwork (might need to push update.zip and rom manually - dont remember how) choose install zip from sdcard and navigate to file you need.
Click to expand...
Click to collapse
will this work even if i didnt have clockwork on my phone?
I flashed the stock JH2 with 512.pit and reparition checked, but the phone goes to the samsung logo, and flash animation and to a blank screen with only the buttons lit up........ah, am losing all hopes really fast.
Now that you are on jh2 take out sim leave external sd inside charge it til full, turn on while and it will boot, saying no memory going internal or external.
So far that would be doa, unless someone found a way to fix or reformat external card but most people that sent it for repair with these symptoms had done doa exchange like me twice or samsung replaced external module meaning it was hardware issue. Sorry.
Sent from my i9000M
it's a long shot, but can I buy an external SD card and run android from there?
I am guessing the only hope is to buy a new phone then?
inshadesofgrey said:
Hi guys, I have been a silent observer of XDA for a while now and you guys have helped through the past 4-5 phones that I've had - but now, I am stuck, so I thought I'll ask for help.
I have a galaxy S (i90000-GT) - originally from Bell, Canada but unlocked. I was running the XJPH with lag-fix and two days ago, when the phone rebooted, it got stuck in a boot loop, samsung logo with black screen comes on, and it starts all over again. Now, I can get into download mode and I followed the process to install JM8, and the stock file (the US Vibrant stock file) and I tried this as well:howto-froyo-fw-i9000xxjpm-upgrade-via-odin-root-recovery-2e-lagfix/[
But to no avail. The boot loop is still there. With JM8, the phone boots up and the goes beyond the flash samsung logo (with the music) but loads to a black screen, with the lights on.
Am really frustrated as this is my only work phone (and I go back to work tomorrow). Without the phone, I am pretty much screwed. I dont care about the Data on the phone (have performed 3-4 data wipes during installing the above mentioned roms) . So anything you can advise, will help!
any ideas?
Click to expand...
Click to collapse
Have you wiped your data/factory reset & wiped your cache? Many phones get stuck at startup because of them.
hi,
i have a Gio S5660 that i bricked trying to sim unlocking it before putting it on sale.
the device can get into Download mode (no recovery mode though) but Odin 4 doesn't flash anything anymore, tried different roms (stock, moded, froyo, GB) nothing works, Odin 4 says PASS but after rebooting the screen keeps on blinking the ugly Samsung logo.
i tried to make a Heimdall flashing package but when i try to load a rom into the packager i get an error that says no Firmware.xml found.
is it even possible to use Heimdall or other Odin versions to flash a Gio, if so how do u make a package for that ?
supermario00 said:
hi,
i have a Gio S5660 that i bricked trying to sim unlocking it before putting it on sale.
the device can get into Download mode (no recovery mode though) but Odin 4 doesn't flash anything anymore, tried different roms (stock, moded, froyo, GB) nothing works, Odin 4 says PASS but after rebooting the screen keeps on blinking the ugly Samsung logo.
i tried to make a Heimdall flashing package but when i try to load a rom into the packager i get an error that says no Firmware.xml found.
is it even possible to use Heimdall or other Odin versions to flash a Gio, if so how do u make a package for that ?
Click to expand...
Click to collapse
After flashing with odin and get in bootloop, press the power button for 10 seconds, after restart press home and power until get in to recovery, there should factory reset and the most important - fix rfs or something, can't remember now exactly, the phone will reboot automaticaly and you have to wait some time to boot.
Which method did you try to unlock it with?
HEllo,
Same problem, keep blinking trying to boot with Samsung white letters.
FR
What, and how EXACTLY did you tried to flash with odin? (Which rom, Onepackage/multipackage, tar/md5...?)
Hello,
Still fighting to bring it into life.
Well the problem began when unlocking with the thread instructions:
http://forum.xda-developers.com/showthread.php?t=1204705
Everything seemed to go as expected but...
After that it never rebooted well, still in cycle on www.samsung letters firs screen.
Even so i tried to flash it with ODIN into Stock Rom 2.3.5 and the same problem.
Sometimes i still can have the "Recovery Mode" and flash other versions, i have the PASS message ok, but when reboot... same problem.
And with the Oneclick Unbrick recovery it fails...
Really worried abou this... nice brick!
Thanks to all that are trying to help!
At the beginning of the process it hads the 2.3.3 version locked to Vodafone.
Maybe you just misspoke, but you can't use Odin if your phone is in recovery mode. It has to be in downloading mode.
In my opinion:
1. Boot into recovery (are you using cwm?)
2. Do a factory reset+wipe everything (incl. dalvik cache)
3. Turn off the phone
4. Download the latest ROM from here: http://forum.xda-developers.com/showpost.php?p=16979769&postcount=547
(S5660XXKS2)
5. Boot your phone into downloading mode
6. Flash with Odin (this is NOT "One package", you have to put everything in the right spot /boot, phone, etc/)
Hello again,
Yes i mean Download mode, i', flashing with ODIN but "one package Versions" i'm goin to try next your link already downloading.
Even if i can not unbrick it (wich is strange because i still can flash it) i must thans you very much for great cooperation!
Working...
You're welcome. When I bricked my phone, this is how I got it working again. I hope it works for you too.
Keep my posted...
Hello again,
Well just flashed again with ODIN (not One Package) and last firmware (2.3.5) and the report is that at the end i have the PASS confirmation but phone keeps flashing and does not reboot alone as supposed (waited 15 mn).
Unplug USB cable, battery out, battery in, power on and it returns to its "preference": alternates between dark scredn and those White letters saying SAMSUNG... infinite loop.
This is strange, i'm tired of seaching everything and this is not a normal beahaviour for this procediure.
I can follow all the steps... and at the final... same result.
Don't really know what to do next.
Once more, thanks for all!
Fernando
I'm sorry it didn't work. I have one last suggestion. The firmware you just tried to flash has a few md5 files. Rename them to tar, an extract them. The files you will find inside are the ones you can flash with Heimdall (data.rfs, system.rfs, etc).
I can't tell you much more, because I never used it (just googled a bit right now), but you can probably find a few tutorials about the subject.
Hello,
The fight continues and for all that i've read so far i almost sure that someting happend with the EFS partition.
I think that, case possible, the way is trying to flash an EFS new partition.
Someone knoes ho to do that?
Thanks!
descobrindo said:
Hello,
The fight continues and for all that i've read so far i almost sure that someting happend with the EFS partition.
I think that, case possible, the way is trying to flash an EFS new partition.
Someone knoes ho to do that?
Thanks!
Click to expand...
Click to collapse
please give more information about stuck on logo (ex: logcat)
and dont play with EFS partition. its very dangerious.
it can really bricked your phone
When you can go to recovery mode with your gio you should flash ext4-formatter.zip(download,put on sdcard,go to recovery find `installzip from sdcard` and flash it.
the internal phone memory has to be in ext4 format ,if not you have the above problems.
after flashing you can install a rom.
By the way,i tryed flashing with heimdall-frontend ,i think it can ,but you have to rename it to a .tar gz file it wil be compiled automatic adding it to heimdall,but...than it says
`firmware.xml is missing from the package` , so...you have to ad(make or edit an existing one,and insert it in the package) that file... which contains name rom ed , than it probably works...
What is heimdall?
sort of odin but odin doesnt run on linux,for flashing
SOLUTION!!
Hey , I figured out a while back how to sort this out... Odin works,The reason though it bootloops is just that the \Data and \Cache Partitions are still in Ext4 Format... Stock Rom uses RFS... So The Solution is - After you Flash Your Stock Rom Via Odin, after it says "PASS" , Unplug USB then Reboot into the stock recovery mode by Holding HOME and POWER Button , Then format Cache and Then Wipe Data/Factory Reset (By doing this it formats back to RFS and then it can operate) ... then reboot to system ... And Voila , It works!!!! (Always works for me)... Hope this Helps Just Remember to USE ODIN (Heimdall apparently not Gio Supported)
Hi all,
I'm new to trying to root the E4GT and I've gotten in a bit of a jam. I don't think I'm completely borked because I can still easily get the phone into download mode or Clockwork recovery, but I'm stuck on what to do next and I want to proceed carefully so I don't accidentally turn this into a hard brick.
Because I'm on Linux, not Windows, after reading up on rooting the E4GT I installed heimdall. It's not the most intuitive program in the world but I eventually worked out rooting it using "heimdall flash --kernel ~/path/to/zImage" where the "zImage" in question belonged to Zedomax v3 as linked from epic4gtouchroot.com. That seemed to work brilliantly as I was able to boot into what appeared to be a reset phone, now with a generic Android boot animation rather than the default Sprint advert, and I had the Superuser app.
From there, I decided to try Strongsteve's Odex blue and I booted into Clockwork. Without even thinking about it I wiped the factory data and cache partition, and then started looking into what I needed to do, only to learn that my external SD was going to be inaccessible from here so I had the .zip file in the wrong place. I proceeded to reboot my phone to set things right but I was shocked when the phone simply appeared to turn off after the (new, rooted) boot animation played. The phone then becomes unresponsive until the battery is pulled, at which point it becomes responsive again.
Because it boots the Samsung logo (with the yellow warning triangle) and part of the boot animation, I have plenty of time to get it into download mode or Clockwork, but I don't know what my next move is. I guess (based on a bad experience with trying to root a Kindle Fire) that this is still recoverable, though. Should I just flash a stock/stock rooted ROM? Reflashing the Zedomax kernel doesn't seem to work like it did before. Has anyone encountered this? Does anyone have a link to a recovery method that should be reliable in this situation? Thanks in advance and please remember LINUX -- i.e., no Odin.
[[ PS - I pretty much described the whole process above, but in case anyone was wondering, let me explicitly state I do not have a working nandroid backup. I only got Clockwork after rooting successfully, and I didn't think wipe data/cache was potentially a brick! :\ ]]
UPDATE: Solved! I was able to successfully flash the zImage from the stock rooted kernel here. Phone is working (and rooted) once again!
Hello guys
I just want to say i'm no where near an expert on this, and i feel i have tried to fix this issue but made it way worse in the process so please be gentle.
This morning i woke to my Samsung Note 2 N7100 just hanging on the samsung start up screen. Tried all the normal things, taking bat out, restarting many times etc. No luck, just kept hitting the samsung screen and freezing.
After some goggling i found my way to the Recovery screen (power+vol up+home) but when it was loading there was a lot of Red Error messages. It loaded the options screen and i tried to do a factory reset. A lot more error messages to basically then say failed. Tired it a few times and even tried to clear the cache but kept failing.
So i tried loading it into Kies, which didn't connect to the phone so i couldn't reinstall the software.
So i decided maybe i need to flash the phone. I downloaded a stock Rom for the phone (i was on Kitkat so found that version) Used odin and half way through the install it came up failed.
Since then the phone only displays the "Fireware upgrade encountered an issue. Please select recovery mode in Kies"
So i went back to Kies but still couldn't find the phone. It also won't let me go back into recovery mode, only into download mode.
I thought maybe i'd give the flashing another go but this time when i flashed it, it just hangs trying to find Pit but eventually fails saying no Pit.
From research it appears that the partition is buggered. All the research i've done seems to say stay away from messing with the partition. some people say its Emmc thats gone and its game over but others say there is hope still.
I can still access the Download menu and the product name is still GTn7100, Binary still samsung official so i am holding out hope there is some life left in it. I'm on my last legs now so open to all offers for solutions. Please assist if you can
Thank you in advance
Andy
If you're able to get in download mode.. Maybe try flashing a custom recovery (TWRP) which you could try full format in it then install a ROM using it.. Also, maybe trying to use a CM based one? Though you might need a external SD card to move files from PC to your phone.
I don't know if this would work, but try it.
Sent from my Galaxy Note II using Tapatalk
Hi guys,
New to XDA, I have a Note 2 which was getting a bit sluggish but worked fine, I rooted and custom flashed TWRP and saved a NANDROID BACKUP using TWRP to SDCARD and kept that on the desktop for safe keeping.
The phone worked fine after that for some time, Now spontaneously I woke up in the morning with the phone stuck on the samsung logo screen, so i knew it was softbricked but i cant understand how that happened.
First thing i tried apart from multiple restarts, removing battery etc, was then boot into custom recovery TWRP and try and restore from SDCARD nandroid backup. But it says EVERYTHING CAN'T be mounted!
E: Unable to find partition size for '/boot''
E: Unable to find partition size for '/recovery'
E: Unable to find partition size for '/modem'
E: Primary block device '/dev/block/mmcb1k0p16' for mount point '/data' is not present!
unable to mount '/data', EFS, System, cache and so forth.....
The phone was sincerely working fine and this happened seemingly randomly while asleep. Phone hadnt dropped and was connected to charger, and prior to this was restarted several times with no issues.
I have been looking at endless articles, I changed to CWM, TWRP, Philz and Stock Recovery and ALL OF THEM are unable to mount. So this does NOT seem to be a problem in the recovery. I used TWRP 2.8.0.1 for my Note 2 as well as 2.7.0.1. So I have a perfect NANDROID RESTORE on my SDCARD and DESKTOP to fix this but no way of mounting it to recovery?
Odin works fine and each time i flashed the recovery it would work fine. Is there some way of fixing it with ODIN?
Any input here would be greatly appreciated, and hopefully this helps someone else with the exact same issue.
Cheers.
the9kill said:
Hi guys,
New to XDA, I have a Note 2 which was getting a bit sluggish but worked fine, I rooted and custom flashed TWRP and saved a NANDROID BACKUP using TWRP to SDCARD and kept that on the desktop for safe keeping.
The phone worked fine after that for some time, Now spontaneously I woke up in the morning with the phone stuck on the samsung logo screen, so i knew it was softbricked but i cant understand how that happened.
First thing i tried apart from multiple restarts, removing battery etc, was then boot into custom recovery TWRP and try and restore from SDCARD nandroid backup. But it says EVERYTHING CAN'T be mounted!
E: Unable to find partition size for '/boot''
E: Unable to find partition size for '/recovery'
E: Unable to find partition size for '/modem'
E: Primary block device '/dev/block/mmcb1k0p16' for mount point '/data' is not present!
unable to mount '/data', EFS, System, cache and so forth.....
The phone was sincerely working fine and this happened seemingly randomly while asleep. Phone hadnt dropped and was connected to charger, and prior to this was restarted several times with no issues.
I have been looking at endless articles, I changed to CWM, TWRP, Philz and Stock Recovery and ALL OF THEM are unable to mount. So this does NOT seem to be a problem in the recovery. I used TWRP 2.8.0.1 for my Note 2 as well as 2.7.0.1. So I have a perfect NANDROID RESTORE on my SDCARD and DESKTOP to fix this but no way of mounting it to recovery?
Odin works fine and each time i flashed the recovery it would work fine. Is there some way of fixing it with ODIN?
Any input here would be greatly appreciated, and hopefully this helps someone else with the exact same issue.
Cheers.
Click to expand...
Click to collapse
It is possible that your Nandroid Backup is corrupt. It happens. Also, as you tried everything, I think you should flash fresh stock rom via odin.
Press thumps up if you found this suggestion helpful.
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
It is possible that your Nandroid Backup is corrupt. It happens. Also, as you tried everything, I think you should flash fresh stock rom via odin.
Press thumps up if you found this suggestion helpful.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Hi ceomaverick,
Thanks for replying so fast, I may have not explained clearly but, the NANDROID BACKUP should be fine, its on the SD but cant be seen by any of the Recoverys (TWRP,CWM,stock,Philz) because nothing is able to MOUNT. So whether or not the nandroid backup is corrupt doesnt matter because we cant use it yet, as first problem is mounting to use the custom recovery restore.
Thanks for the suggestion about the Stock ROM , I have been downloading that for the past few hours! (XME-N7100XXUFNI4-20141020155451.zip) haha! That is what I will try next via Odin, just not sure how to do it safely. I will try and google and article for re-flashing stock rom via odin to make sure i tick all the correct boxes. If anything works will be back to update.
Cheers
P.s If anyone is interested in looking for this phones Stock ROM I found it here:
samsung-updates.com/device/?id=GT-N7100 (Select the one for your country/region)
the9kill said:
Hi ceomaverick,
Thanks for replying so fast, I may have not explained clearly but, the NANDROID BACKUP should be fine, its on the SD but cant be seen by any of the Recoverys (TWRP,CWM,stock,Philz) because nothing is able to MOUNT. So whether or not the nandroid backup is corrupt doesnt matter because we cant use it yet, as first problem is mounting to use the custom recovery restore.
Thanks for the suggestion about the Stock ROM , I have been downloading that for the past few hours! (XME-N7100XXUFNI4-20141020155451.zip) haha! That is what I will try next via Odin, just not sure how to do it safely. I will try and google and article for re-flashing stock rom via odin to make sure i tick all the correct boxes. If anything works will be back to update.
Cheers
Click to expand...
Click to collapse
Well, no hassle really. ODIN 3.09 does a great job. Just dump your file in AP tab and start after MD5 is verified. You should be fine. Welcome.
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
Well, no hassle really. ODIN 3.09 does a great job. Just dump your file in AP tab and start after MD5 is verified. You should be fine. Welcome.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Bad news, Odin failed halfway through. Was able to boot back into download mode thankfully. But after rebooting again, seems the phone is now HardBricked. Meaning it wont even turn on.
Not sure what options are left now (if any). Anyone know what to do with a Note 2 hardbrick (apart from use it as an expensive door wedge).
Cheers
the9kill said:
Bad news, Odin failed halfway through. Was able to boot back into download mode thankfully. But after rebooting again, seems the phone is now HardBricked. Meaning it wont even turn on.
Not sure what options are left now (if any). Anyone know what to do with a Note 2 hardbrick (apart from use it as an expensive door wedge).
Cheers
Click to expand...
Click to collapse
This should not happen unless the cable or the usb ports are faulty. ( or if u have not followed the instructions correctly )
Anyway,
Can u still go to download mode? If yes, try a different cable and flash.
If no, use a USB jig to revive your phone. Ebay has them in plenty. With this you might get into download mode.
Also, are u flashing the correct firmware?
I have flashed custom ROMs n number of times without a single instance of failure.
Best of luck.
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
This should not happen unless the cable or the usb ports are faulty. ( or if u have not followed the instructions correctly )
Anyway,
Can u still go to download mode? If yes, try a different cable and flash.
If no, use a USB jig to revive your phone. Ebay has them in plenty. With this you might get into download mode.
Also, are u flashing the correct firmware?
I have flashed custom ROMs n number of times without a single instance of failure.
Best of luck.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Hi again,
Yes, I can fully appreciate why you would say that, from what I see ODIN is very straight forward and unless you do something totally (silly), like jiggle the cable or do something midway it should not hardbrick. Therefore it makes sense you suggesting the cable is faulty, but it seemed to copy over 32GB of data seemlessly in one go. Although i will change the cable as a precaution as there is a slight cut.
When I say hardbricked, I mean hardbricked as in no recovery and no download mode, and no display whatsoever no matter what you do.
[UPDATE] Okay, the strangest thing happened. After a whole day of charging the phone, sometimes trying it on for luck, hoping something would happen. I went to the doctors and came back, and oddly enough the screen had life!!! Yes, this gets bizarre, I repeat a clearly hardbricked phone resurrected back to life with a screen showing ("A firmware upgrade encountered an error, please retry with kies") or something like that, so overjoyed with this sign of life I carefully put it into download mode and its now waiting.... But before I try Odin again, I think I will take a leaf from Ceomavericks suggestion and get a brand new cable from another samsung phone and use that this time.
By the way Ceomaverick, last time i just tried to flash to stock rom using AP, and kept autorebook and Ftime checked.
This time I am seeing on a thread to do the following, please advise (given that my TWRP doesnt mount anything at all).
It says do this: from: http://forum.xda-developers.com/showpost.php?p=43760271&postcount=22
Open ODIN, and check Re-Partition, Nand Erase All, Auto Reboot and F. Reset Time. Uncheck all other boxes. Click the PIT button and select the PIT file appropriate for your device (16GB or 32GB). Click the PDA file and choose the Stock Rom you downloaded. Press start and wait.
File Type: rar PIT_t03g_0907_16GB.rar - [Click for QR Code] (899 Bytes, 84 views)
File Type: zip BOOTLOADER_N7100.zip - [Click for QR Code] (1.03 MB, 75 views)
click start.
If everything goes well, the process should succeed and the phone should reboot. Don't wait for the phone to boot into android. Immediatly boot into recovery, factory reset the phone and wipe cache. Reboot to Android.
Now, if everything worked well, your phone should boot into Android. And then sort out the sleep of death issue.
I think I will wait for some feedback before doing this and just enjoy that my phone is mysteriously back in download mode, perhaps a hardware issue......
Another thread reading http://www.theandroidsoul.com/unbrick-restore-samsung-galaxy-note-2-gt-n7100/
Cheers
UPDATE:
Now that we are back to softbrick, I tried download mode and ODIN again, this time it fails right near the end. Last time it failed somewhere in the middle. So it seems to randomly fail and this is with the brand new USB Sony PS4 Cable. I ditched the worn out samsung cable because of the first fail. So twice its failed, but at different points. If it doesnt hardbrick again this time I suppose I will keep repeating till it passes.
For now just a straight rom flash, not sure if i should repartition with the before mentioned PIT Files and bootloader etc. Wont do that unless im told.
Thanks
Attached (Fail Image)
the9kill said:
UPDATE:
Now that we are back to softbrick, I tried download mode and ODIN again, this time it fails right near the end. Last time it failed somewhere in the middle. So it seems to randomly fail and this is with the brand new USB Sony PS4 Cable. I ditched the worn out samsung cable because of the first fail. So twice its failed, but at different points. If it doesnt hardbrick again this time I suppose I will keep repeating till it passes.
For now just a straight rom flash, not sure if i should repartition with the before mentioned PIT Files and bootloader etc. Wont do that unless im told.
Thanks
Attached (Fail Image)
Click to expand...
Click to collapse
Good news is you can visit download mode.
Ok. Alternative.
Download Philz recovery latest version. Flash it via ODIN. If it succeeds, u can flash a touchwiz rom
If that fails, then your partition table is corrupt (asumming thr r no hardware issues. )
Download firmware from different region for your note 2. India maybe. And flash them. May be this might do the trick.
If all above fails, it has to b a hardware issue.
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
Good news is you can visit download mode.
Ok. Alternative.
Download Philz recovery latest version. Flash it via ODIN. If it succeeds, u can flash a touchwiz rom
If that fails, then your partition table is corrupt (asumming thr r no hardware issues. )
Download firmware from different region for your note 2. India maybe. And flash them. May be this might do the trick.
If all above fails, it has to b a hardware issue.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Hi ceomaverick!
Just going to highlight what you said with a few questions please.
"Good news is you can visit download mode. " - Yes, and once I tried to flash it for the second time it got hardbricked round 2. So somehow me flashing it gives it a seemingly temporary hardbrick. That was some hours ago and still no way to turn it on or get any sign of life, just like yesterday before it miraculously came to life again. Which since it has happened once I am guessing it will come back to life again as i followed the exact same procedure as before but Odin failed much later on into the process rather than halfway through.
"Download Philz recovery latest version. Flash it via ODIN. If it succeeds, u can flash a touchwiz rom" - Okay I had Philz before I will reflash it when it comes up and i suppose search for a note 2 touchwiz rom. Philz as before wont be able to mount anything though, even sim card. As i did this prior none of them, TWRP, Philz or CWM can mount anything. So even if i have the ROM file i wont be able to use it on SD if the SD doesnt mount, but i can try it through Odin?
"If that fails, then your partition table is corrupt (asumming thr r no hardware issues. )" - I suspect this is the case hence not mounting, so do I use that PIT file and select Re-Partition in Odin to resolve that?
"Download firmware from different region for your note 2. India maybe. And flash them. May be this might do the trick." - Good idea, while the hardbrick is waiting to resurrect (LOL), I will start a download.
"If all above fails, it has to b a hardware issue. " - Again something I suspect, from forum could be this dreaded eMMC "insane samsung chip" problem which is as far as i know a 16gb internal SD? If so, perhaps there is a way to put in a 16gb SD and edit boot to mount from there as internal instead from the eMMC? Sorry if thats way out there, but i read something like this once.
Appreciate the help, waiting for it to spring back into life
the9kill said:
Hi ceomaverick!
Just going to highlight what you said with a few questions please.
"Good news is you can visit download mode. " - Yes, and once I tried to flash it for the second time it got hardbricked round 2. So somehow me flashing it gives it a seemingly temporary hardbrick. That was some hours ago and still no way to turn it on or get any sign of life, just like yesterday before it miraculously came to life again. Which since it has happened once I am guessing it will come back to life again as i followed the exact same procedure as before but Odin failed much later on into the process rather than halfway through.
"Download Philz recovery latest version. Flash it via ODIN. If it succeeds, u can flash a touchwiz rom" - Okay I had Philz before I will reflash it when it comes up and i suppose search for a note 2 touchwiz rom. Philz as before wont be able to mount anything though, even sim card. As i did this prior none of them, TWRP, Philz or CWM can mount anything. So even if i have the ROM file i wont be able to use it on SD if the SD doesnt mount, but i can try it through Odin?
"If that fails, then your partition table is corrupt (asumming thr r no hardware issues. )" - I suspect this is the case hence not mounting, so do I use that PIT file and select Re-Partition in Odin to resolve that?
"Download firmware from different region for your note 2. India maybe. And flash them. May be this might do the trick." - Good idea, while the hardbrick is waiting to resurrect (LOL), I will start a download.
"If all above fails, it has to b a hardware issue. " - Again something I suspect, from forum could be this dreaded eMMC "insane samsung chip" problem which is as far as i know a 16gb internal SD? If so, perhaps there is a way to put in a 16gb SD and edit boot to mount from there as internal instead from the eMMC? Sorry if thats way out there, but i read something like this once.
Appreciate the help, waiting for it to spring back into life
Click to expand...
Click to collapse
If the firmware from other region fails, then find pit file for 16gb to flash. If that too fails, I think your phone needs hardware repair.
Sent from my GT-N7100 using Tapatalk