I flashed Doomkernel v13 into my ARC few days ago. Everytime it takes long time to reboot - at least 10 minutes and show several times of Doomkernel logo. Is it normal? Or I forget to do something. I have wipe the dalvik cache in recovery mode. Strange!!
That's not normal. Takes as long as normal here.
Try to reflash the kernel
Sent from my LT15i using XDA Premium App
Another problem is when I charge the phone with charger, it will keep on rebooting. I think i need to reflash it again.
Sent from my LT15i using XDA App
Am I did anything wrong? I reflash the kernel several times, but still take very long time to boot. I unlocked BL and rooted, and follow the procedure.....
Maybe you can download Kernel files again and try with that ?
Re-flash the firmware and flash the ROM. Just backup your apps using Titanium backup.
Related
Anyone have any ideas why I keep getting continous reboots no matter what ROM I use. Started earlier today, though I had random reboots before with CM-6.
Tried flashing Fresh 3.2 after wiping cache/data/dalvic. And when system gets into Android it just continously reboots. Though timing of the reboot could vary.
Tried going back to other ROMs (stock..CM-6...fresh 3.1) and the reboots linger...
Did you flash a custom kernel and overclocking it too high? Did you root via Toast's method and install the engineering bootloader to unlock nand? CM6 requires this bootloader as do other ROMs.
Either of these would cause bootlooping.
Sent from my PC36100 using XDA App
My phone has problems with rebooting ... thought it was a temp thing but now it seems to only happen when I'm using the browser. Once in a blue moon it'll reboot when not browsing but not usually. I can use the XDA app to float around these boards for an hour without a reboot but within 5 minutes of opening the browser and navigating anywhere it just reboots. Happens on any ROM stock or not.
edit: saw the second post; boot loops or reboots?
conqu1stador said:
edit: saw the second post; boot loops or reboots?
Click to expand...
Click to collapse
Same thing. Tomayto tomaato.
Sent from my PC36100 using XDA App
both of these problems sound like you're using too low voltage or are overclocking. Try loading the stock RUU, factory reset, and then load stock kernel. If it is stable, then change to a new ROM. If it is stable, then switch to a new kernel. Be sure to wipe.
elstupidos said:
Anyone have any ideas why I keep getting continous reboots no matter what ROM I use. Started earlier today, though I had random reboots before with CM-6.
Tried flashing Fresh 3.2 after wiping cache/data/dalvic. And when system gets into Android it just continously reboots. Though timing of the reboot could vary.
Tried going back to other ROMs (stock..CM-6...fresh 3.1) and the reboots linger...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=761461
this happened to me. I had to fix the issue by deleteing the last 3 or 4 apps I downloaded and restart.
sombdy said:
Same thing. Tomayto tomaato.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
a boot loop is when the phone doesn't boot all the way through and it loops over and over. a reboot, when the phone is on and working, is a reboot.
sombdy said:
Did you flash a custom kernel and overclocking it too high? Did you root via Toast's method and install the engineering bootloader to unlock nand? CM6 requires this bootloader as do other ROMs.
Either of these would cause bootlooping.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I rooted via toast's method with the nand unlocked. I was using snap kernel with CM-6 but with the UV and no OC. But I was still expieriencing the reboot-(loop) even after full wipe /data/cache/dalvic x2 than installing any ROM.
Okay,
I want too update the kernel on my latest stable cm7...
I went to incredikernel.com and got the latest gingerbread kernel, but when i boot into recovery, install it, and reboot again... The phone freezes after bootloader screen and never gets into Android... :/
How can i update my kernel?
Thanks in advance
Sent from my ADR6300 using XDA App
solved!
okay, what i did to fix this...
First, make a backup.
Then had to do a complete wipe and factory reset...
Next, install latest gb kernel..
Now, go to backup and restore, preform custom restore, and restore only the 'data' partition.
lastly, go to 'power off'
wait ten second, boot phone again.
This boot took longer, but it worked..
Sent from my ADR6300 using XDA App
Before this I was in gummy toro ..then the first day that vicious jb roms out I manage to flash jb roms.. and its working.. then I try to flash different jb roms and it stock in Google animation..did everything clean flash delete all..then flash jb roms and again boot loop.. I unbrick my nexus using g.n. toolkit v7 back to stock..then set up everything then I try to flash a jb roms again yet again stock in boot loop.. any help pls... thanks in advance.
Sent from my Galaxy Nexus using XDA Premium App
landrian18 said:
Before this I was in gummy toro ..then the first day that vicious jb roms out I manage to flash jb roms.. and its working.. then I try to flash different jb roms and it stock in Google animation..did everything clean flash delete all..then flash jb roms and again boot loop.. I unbrick my nexus using g.n. toolkit v7 back to stock..then set up everything then I try to flash a jb roms again yet again stock in boot loop.. any help pls... thanks in advance.
Click to expand...
Click to collapse
What are you using to flash? ADB, ClockworkMod Recovery? My rule for ROMS has been: download to phone and ensure download was completed successfully, reboot to CWM recovery, wipe cache, wipe Dalvik, install ROM, wipe Dalvik again, reboot.
If you can provide any more info regarding your process I can try and help you out.
Which galaxy nexus version is yours? Which Roms did you install? Did all three wipes?
Sent from my Galaxy Nexus using xda app-developers app
@ooddiittyy,
I'm using the one from gnex toolkit v7(clockwork mod touch recovery) I did wipe data /factory reset 3times,wipe cache and wipe dalvik and I also format system,cache and data..reboot and stock in boot loop.. I did that to 3jb roms and same thing happens..so I restore to ics.and this time boot up well. This is the first time I've in counter something like this..been flashing since vibrant.
Sent from my Galaxy Nexus using XDA Premium App
landrian18 said:
I'm using the one from gnex toolkit v7(clockwork mod touch recovery)
Click to expand...
Click to collapse
this makes me die a little inside.
also, cwm touch is known to have issues with flashing stuff.
Oh.. so I think I should use rom manager.. to flash vicious-toro v3..
Sent from my Galaxy Nexus using XDA Premium App
Coming from gummy toro I manage to flash liquid vicious toro v1to v3 with no problem..then vanirbean rom and when I flash [email protected]_jelly that when its all started...I can flash ics rom and I can restore..but I can't flash jb roms..
Sent from my Galaxy Nexus using XDA Premium App
Try re downloading the rom again if its stuck at the Google animation let it sit for 5 to 15 minutes. It should boot up on its own. If not then there's something else wrong. But when I'm stuck at the Google logo with any jb rom I just let it sit. And eventually it boots up fine.
Sent from my Galaxy Nexus using xda premium
Thanks for the reply..I just flash it again I'm using 2 different jb rom and 2 different kernel..still stock in boot loop..I've waited for 30mins each in boot loop..before I had the vicious rom for almost a week then try different rom and this is what I got.. hayzz...
Sent from my Galaxy Nexus using XDA Premium App
did you change out your recovery to the regular cwm?
@zepius . Yep I did.. get it from from manager...
Sent from my Galaxy Nexus using XDA Premium App
landrian18 said:
Thanks for the reply..I just flash it again I'm using 2 different jb rom and 2 different kernel..still stock in boot loop..I've waited for 30mins each in boot loop..before I had the vicious rom for almost a week then try different rom and this is what I got.. hayzz...
Sent from my Galaxy Nexus using XDA Premium App
Click to expand...
Click to collapse
OK. Hmm. Go into recovery wipe everything 3x data/cache/dalvik cache flash the rom (don't flash a kernel) just the rom go back and reboot system now and see if that helps.
Edit: make sure u have over 50% battery before doing this.
Sent from my Galaxy Nexus using xda premium
I did that last night..wipe 3× everything.. did flash just rom, then rom with kernel, and also I did try wipe just cache and dalvik.. and also I did try format system, cache and data...
Edit: this is the first time it happen to me..even though I unbrick ,luck bootl. Factory reset .. its so weird...
Sent from my Galaxy Nexus using XDA Premium App
hey all,
not to highjack this thread, but I'm suddenly having the same issue.
I was on VanirBEAN v7 with the Popcorn Kernel that came with it.
I then flashed Franco's latest (384 GPU version).
Had no problems until last night when I let the phone run the battery all the way out and die completely. I let it charge for a bit, then tried booting and I'm stuck at the Google logo or get a reboot during the boot animation, depending on what I'm doing.
So here's what I've tried. All of these come with a wipe/cache/Davlik inbetween:
flash Vicious Toro JB V3 (stays on Google logo)
flash VanirBEAN v7 (reboots at VanirBEAN animation)
flash AOKP build 37 (reboots on the TeamKang animation)
selectively restore boot and system for AOKP 37 from a previous stable backup (reboots at the Android boot animation since in the ROM I had it set to not show the TeamKang boot animation)
I'm really at a loss right now. I'm trying a full restore on the backup I did before installing my first JB ROM.
edit: tried a full restore and i'm getting "Error while restoring /data!"... ugh.
Is my only choice to try Wugfresh's toolkit and restore stock and relock?
No one tried to fix permissions?
3x wipes, superwipe scripts..
That's not gonna help. If you wiped it once, it isn't there anymore.
I used wugfresh to back from fresh start and still if I flash jb rom I'm stock in jb rom.. done with 3 different jb rom. Same on all of them.. and yes I also did fix permission... I also did about mount and unmount regarding the system,cache and data... I'm tired of flashing and waiting in boot loop so I restore to ics gummy. I hope someone can help us with this...
Sent from my Galaxy Nexus using XDA Premium App
landrian18 said:
I used wugfresh to back from fresh start and still if I flash jb rom I'm stock in jb rom.. done with 3 different jb rom. Same on all of them.. and yes I also did fix permission... I also did about mount and unmount regarding the system,cache and data... I'm tired of flashing and waiting in boot loop so I restore to ics gummy. I hope someone can help us with this...
Sent from my Galaxy Nexus using XDA Premium App
Click to expand...
Click to collapse
I suppose you could try reinstalling the bootloader, or using one of the recent JB bootloaders and see if that helps. I can't think of a good reason why this should be happening based on what you've described, however. I assume you've checked obvious stuff like the MD5 sums on all your downloaded ROMs, etc?
Hi everybody!
I have identical issue, I did all possible, now I´m close to give it up. Yes, I checked all downloaded files by MD5 sums, I tried latest CWM, latest TWRP, gnex-JB-bootloader (…lc03). Today I tried also “Super_Wipe_Lite_Nexus”, but I can´t jump boot animation. I´m flashing roms long time, but this magic never happened. What else we should try to clear/delete?
Well, the thing is, I do a factory reset, wipe cache, Dalvik, System, Battery stats, and flashed CM9. Everything perfect, it starts the (blue strange CM9 monster) logo and it loads.
But, at locker screen it show a "launcher" error (I don't remember the name of the launcher) and everything is EXTREMELY SLOW, takes like 10 second to unlock de phone and is like slow motion.
Any idea? Maybe the kernel?
Sent from my LT15i using xda premium
the kernel you should be using is the one given to you in the CM9.zip which is FXP 130 or 131 (what ever one you get) if you are using a different kernel you will have the slowest rom
I flashed via FT the FXP kernel img included in the cm9.zip, now, when I'm flashing CM9 in CWM it says “Status 7 error” and some build.prop text showing my device name. And of course, the installation is aborted.
What now?
Sent from my LT15i using xda premium
Try flash kernel using fastboot man. Not sure if it is caused by the flashtool. But I tried CM9 with following steps, it works well:
1. Flash the kernel using fastboot.
2. Boot into CWM and flash the ROM
3. Cheers!:highfive:
I did these for many times never got any problem.
There is FXP 132 already try use it. Im using it on my CM9
Well, 132 via fastboot worked perfect. Thank you guys.
Sent from my LT15i using xda premium
Cm Roms
Never Lagged For Me.
Sent from my Xperia Arc S using Tapatalk 2
I rooted my phone fine. I unlocked my phone fine.
I installed clockworkmod recovery fine. I flashed clockworkmod. I backed up my rom at the stage after rooting and unlocking.
I then downloaded cyanogenmod from the app's download page. I downloaded it and installed it. I used the default selections which is "wipe delvich cache"
When I turned on my phone, it stays at the blue screen with the alien forever.
Any help on what to do? Thanks!
Reflash the ROM using these instructions. You probably wiped the wrong way.
http://forum.xda-developers.com/showthread.php?p=32532260
Sent from my SGH-T989 using xda premium
I had same problem installing cm10 with cwm. In order to get past boot animation you have to use the dark side cache wipe after flashing ROM. Ideally you should -darksidesuperwipe then flash ROM then darksidecachewipe. I like to let it boot without gapps first. Set up WiFi and all that.
Try rebooting and flash darksidecachewipe. Then reboot. I always had lingering problems until I flashed twrp. After twrp is installed there is no need for darkside scripts.
Worth it to just get twrp and redo.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
ctrlaltdeln said:
I had same problem installing cm10 with cwm. In order to get past boot animation you have to use the dark side cache wipe after flashing ROM. Ideally you should -darksidesuperwipe then flash ROM then darksidecachewipe. I like to let it boot without gapps first. Set up WiFi and all that.
Try rebooting and flash darksidecachewipe. Then reboot. I always had lingering problems until I flashed twrp. After twrp is installed there is no need for darkside scripts.
Worth it to just get twrp and redo.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Wow very informative and helpful too bad the OP could not at least give you some props and let you know he saw this and you helped him out. People panic come on here and ask questions then never come back to thank or at least acknowledge the help... Hey for that I will give you your first xda Thanks.... :good:
Try returning to stock and try again. Do things in this order: 1. Root, CWM, ETC. 2. CM7 or another 2.3 ROM (usual wipe) 3. CM9 (again, wipe)