Related
Hey Guys (and Girls of course),
a friend of mine (really, i don't own a Diamond) has got some serious problems with his diamond.
Following issues:
* USB Data seems to dead, Charging works but even in Bootloader-Mode the PC doesn't even recognize there's something attached to USB
* WLAN and Bluetooth can be enabled but are actually as dead as USB is
As flashing via USB won't work because the Diamond won't be recoginzed we tried to flash it via Internal Storage (DIAMIMG.NBH was downloaded via 3G-Online connection). We tried this with the latest official ROM for the Device (o2 Germany).
The bad thing... it doesn't work, too... the Bootloader seems to be stuck on "Loading..." (at least it stood there for 10hours).
I also tried flashing a different SPL, but that fails, too... as with the full image it's staying forever at "Loading..."
Any Chance to revive the Device somehow??
1. do you have HARSPL still on it ?
- if yes, then do a hard reset with formating your NAND
then get the device back on ! try to connect to usb, if not possible,
download a ROM like AZTOR with radio build in !
Try the DIAMIMG.nbh way from you internal storage !
If not successful try to get QMAT http://revskills.de/ and ask viperbjk to help you, be kind get his software and i think he will help out.
If you are in Hamburg I could possibly help you either !
Greets
thx, we'll try the Hard-Reset Way first.
I'm living in Munich, the owner of the Device is living near Passau, so Hamburg is not "just around the corner"... but thx for offering ur help anyways!
Greets from Germany
Sorry that i write in german but becaus Reichi come from germany,i can tell him anything about his problem in german language!
@ Reichi
Ruf Deinen Kumpel mal an und sag ihm,er soll den Diamond über den internen Speicher flashen.
Alternativ-Methode um Diamondroms zu flashen:
Die NBH muss zwingend Diamimg.nbh heissen,also RUU_signed.nbh umbenennen oder gleich ein neues ROM ziehen,evtl.hier:
http://www.ppc-welt.info/community/forumdisplay.php?f=204
Kopiere die Datei auf den internen Speicher.
Dann folgende Tastenkombinationen drücken:
Volume down und Pfeil-taste (<-) gleichzeitig gedrückt halten.
Resetknopf drücken und loslassen, die beiden anderen aber noch festhalten
bis der Bootscreen kommt. Tasten loslassen. Warten bis die Aufforderung den
Powerknopf zu drücken kommt. Diesen dann drücken (Ein-Aus Schalter oben auf dem Gerät)
und schon flasht es das ROM in ca. 2 Minuten.Wenn der flash fertig ist (successfull)
muss ein Softrest gemacht werden. Eine enorme Zeitersparnis für Vielflasher ;-)
Vielleicht hilft das ja schon.
Gruß
pego2007
Wie oben geschrieben hängt der Bootloader in diesem Fall bei "Loading..." - flashen vom Internen ROM ist also nicht drin... er soll das jetzt mal mit vorherigem hard-reset testen...
english:
As written above flashing from internal Memory doesn't work, too... the bootloader gets stuck saying "Loading..."
Hello everybody, I'm "the friend"
Thanks for the fast response and your help!
I've done the hardreset and also formatted the NAND but no success after connecting the diamond via usb.
Now I'm downloading the AZTOR-ROM but it will take a few hours .... no 3G, only GPRS available here...
Now, i tried to flash the AZTOR from the internal Storage, but the same issue again -> "Loading..." on the bootscreen and nothing happens!
Hast du vorher mal den NAND flash gelöscht ??
Gruß
edit: Did you delete the NAND flash before ?
Hi Neutron83,
beim Hardreset hab ich den Reset incl. Löschung des NAND ausgewählt. Anschließend war der Speicher auch leer. Hab das AZTOR-Image herruntergeladen (nur DIAMIMG.NBH war im Internen Speicher) und versucht zu flashen. Meldung "Entering moviNAND" und im nächsten Screen "Loading..." und dabei bleibt es leider wieder...
Edit:
I've done the hardreset including NAND-Format, afterward the internal storage was empty. I renamed the AZTOR-Image to DIAMIMG.NBH and saved it to the NAND (it was the only file in the internal storage). But while trying to flash the image, the screen says "Loading..." and nothing happens.
Also versuch mal folgendes ... klemm dein diamanten an USB dann Bootloader starten (alles abschreiben und hier posten) (Bootloader erreichste mit Softreset und dann vol up + power knopf gedrückt halten)
Welches os verwendest du (deine PC)? Welche SPL hast du ? hab dir ne PM geschickt ! schreib mir mal da ... dann stört niemanden unser deutsch
Edit:
Try the following, connect your diamond to USB then enter bootloader (write everything down) (Bootloader is reached via Vol up + power button, after softreseting)
Wich OS do you use ?(PC side) Wich SPL you use ? I Wrote u a PM ! there we can write so nobody can be angry about our german
All German only posts require transaltion to english included in the post. If this isn't corrected the thread will be closed.
Please read and follow the forum rules.
Can`t flash
@ reini & friends
I`ve found something about error with flash-devices here:
http://forum.xda-developers.com/showthread.php?t=409425
The author ist a german too. I think you can pm him and answer about your problem,perhaps in german ?
greetz
pego2007
After entering the bootloader, the screen shows this:
DIAM300 MFG 64M
SPL-1.30.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
Okay i would recommend upgrading the SPL / reflash the SPL to the device !
For that put your device into bootloader mode (what OS u use on your pc when u flash?) then get 1.40OliNex and run RUU !
possibly it can flash if you're already in bootloader mode,
Enter bootloader
Connect USB
Run RUU from Unsigned-Hard-SPL-Diamond-OliNex.zip
... for that i also would try use MTTY to connect to your device if its "talkable in any way"
Please add me in ICQ so we can do in german AND its faster than board stuff !
sounds a little bit daft but do you have active sync installed on your pc and have you tried it on a different computer. also if all else fails run the phone completely dead and leave the battery out for 24hrs (back it up first)
I'm using Windows XP Pro SP3 with Active Sync 4.5
Of course, I've also tried to connect on several other hardware with XP SP2 and Vista Ultimate.
Hello !
It may be an hardware problem... I think you should get it back to your retailer, warranty is for that kind of problems...
Good luck !
schwemma said:
After entering the bootloader, the screen shows this:
DIAM300 MFG 64M
SPL-1.30.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
Click to expand...
Click to collapse
HELLO, you have to have a SIGNED ROM. Because you have the Protected version of HARD SPL that will NOT allow you to flash any rom.
Change it to other SPL or try a signed rom first.
USB is a problem of Hardware!
We fixed the HardSPL with 1.40 version,
internal storage flash with the nbh of the hardspl package, now he was able to flash another rom, so he flashed aztor ich didnt solve the problem so radio wasnt the problem. now hes going to reflash stock rom and then flash stock spl and get it back to warrenty !!
same thing here..
Hi guys,
i'm facing the same problem, obviously the car charger must have killed my USB, went through the same procedures like you did, all in vain. Just one Question: Has internal flashing of Stock-SPL been possible for you? cause i think the Olinex HardSPL 1.4 is write protected somehow and was still there after I tried to reflash stock SPL from internal memory...
A short information would be great, thx in advance
Greetz from Karlsruhe!
Windows Mobile 6.1 VDA GPS / Toshiba G710 / Amoin 6711A Kitchen (GPS-R11-080708-NEPTUNE 5.2.19581 aku 1101)
http://www.megaupload.com/?d=3RNNHGD5
- Support SDHC Cards
- GPS Driver incl.
"unzip the Kitchen to C:\VDA-GPS"
"the orginal Kitchen is to big you must remove Part(s), for example : SYS\SampleMusic"
"for flash disable "USB Connection" under Active Sync"
enjoy Powerbyte
problem
Hi man, Thanks for kitchen and other tools. But I have problem with flashing VDA GPS-R11-080708-NEPTUNE rom image to my VDA GPS...for more information read this: http://forum.xda-developers.com/showthread.php?p=3636188#post3636188
You can Flash Beta 2, a new Kitchen Version goes online in the next week, inluded a new non Beta ROM
powerbyte
THX
Thank you very much...beta 2 version running great!
is there a way to use movex with windows vista/seven?
if i try to send the image, movex and any other tool isnt able to find my device
i also tried to bring my vda in "download" mode by pushing the power and camera button
thx for your help
Hi powerbyte,
is it possible, that you share the file without the sample music in it?
i'm not able to manipulate the rom.
thx a lot
THX but
hi powerbyte,
please can you provide a imagefile without the samplesounds ? (a smaler one)
i don´t understand how can i create a smaler image with your VDA-GPS package.
THANK YOU ...........
ragards
riodoro
run step 1. Drop Flash.img.cmd (drop Flash.img on Drop Flash.img.cmd)
run step 2. PKTool.cmd
look in the C:\VGA-GPS\SYS Folder, and delete Folder SampeMusik
run the next steps, and create a G710.NEW.IMG for Flash
please
now i have it !, thank you for your answer powerbyte.
I have flashed my vda with my new image successfull but now i can not start any settings in my vda. When i would like to set my clock or anythink an error comes like this: "Fehler Einstellungen konnten nicht geöffnet werden."
Have you any idea ??
Thank you for your Help !
regards
riodoro
teac said:
is there a way to use movex with windows vista/seven?
if i try to send the image, movex and any other tool isnt able to find my device
i also tried to bring my vda in "download" mode by pushing the power and camera button
thx for your help
Click to expand...
Click to collapse
Same here...but on Windows XP!
So if anyone have an idea...please let us know...
Thank you...
It's working for me to use another USB-Cable and WinXP
But the rom is still not working (Not possible to change options)
PS.: Wer ist eigentlich deutsch? Powerbyte? Du evtl. auch?
Der VDA GPS ist fast ausschließlich in D verkauft worden.
MfG
Hi teac
auch D, Du hast auch das Problem mit dem ROM dass keine Einstellungen im vda verändert werden können ? , sonst funktioniert alles gut.
Bei der Beta2 von powerbyte kann ich die Einstellungen verändern, nur leider gehen die Ringtones nicht.
grüsse
Ja, bei mir sieht es genau so aus.
Werde mal versuchen, ob man der Beta2 die fehlenden sachen aus der "finalen" Version von powerbyte einfügen kann. Evtl. hilft auch ein weiteres entfernen von dateien aus der Version von Powerbyte, da die Größe auch ohne samplemusic noch grenzwertig ist.
@Powerbyte, vielleicht hast du ja mittlerweile auch eine lauffähige Version.
mfg
hi teac,
die idee mit dem schrumpfen hatte ich auch schon weil ich dachet er hätte keinen Platz mehr die Konfiguration zu schreiben, hab das img bis auf 44MB verkleinert, hat aber nichts gebracht.
grüsse
then you only remove parts, go this way
Step 1. drop Flash.img to 1. Drop Flash.img.cmd
Step 2. run 2. PKTool.cmd
Step 3. remove for example all other Language Files and TelmapNav.exe do not remove German 0407 and English 0409 Files
Step 4. run 4. Make new IMG.cmd
Step 5. run 5. Flash.cmd
have fun
hi powerbyte,
i do this:
Step 1. run 1. Drop Flash.img.cmd
Step 2. run 2. PKTool.cmd
Step 3. i remove all other Language Files (not 0407 and 0409 Files) and TelmapNav.exe
Step 4. run 3. BuildOS.cmd
Step 4. run 4. Make new IMG.cmd
Step 5. run 5. Flash.cmd
but i have the same problem, i am not able to be change settings in my vda.
ERROR "Fehler Einstellungen konnten nicht geöffnet werden"
regards
riodoro
Please flash another Image (older E78 Rom) and then your new Image
Old Rom
http://thanhcongmobile.com/download/Smartphone B800/UpRom B800/GSM6711_wm5.3.img
I tried with another usb cable...and now it is connecting...but i have the "loadram bin failed" error....
If you know what to do...please tell me!
I tried with another usb cable...and now it is connecting...but i have the "loadram bin failed" error....
If you know what to do...please tell me!
hi powerbyte,
with the old rom (wm5.3), i can not enter in the download mode by pressing the power- and camera button ?!?
whats now wrong ?
regards
riodoro
My Test Wave 2 has no SIM... so I can't access Samsung Apps... I thought.
But under KD6 it seems Demo App with access without SIM...
1.
Any idea what HQTEST_Fash_T is?
HQTEST I saw also as prefix for Font...
Best Regards
I guess these are the apps for testers to test the featured options. Flash, WAC 2.0, font etc.
Tried short to add Apps from KD6 into KJ1... but failed.
Samsung Apps not start... now I'm back on KD6...
Best Regards
Now I understood what Service not available means...
Correct bada Version is mandatory.
"Apps" check Version in handset...
Themes have their own engine... they also check Version
At the moment I don't know where Check engine is stored for Themes...
Minimum Firmware Version seems MBUKI on S8500, but then I can't access this theme...
On XXKL1 on S8530 I have no problem to download Flash Themes.
Best Regards
This store...
Best Regards
adfree said:
This store...
Best Regards
Click to expand...
Click to collapse
Hy adfree please share your samsung apps test,thanks.
Best Regards.
adfree said:
Now I understood what Service not available means...
Correct bada Version is mandatory.
"Apps" check Version in handset...
Themes have their own engine... they also check Version
At the moment I don't know where Check engine is stored for Themes...
Minimum Firmware Version seems MBUKI on S8500, but then I can't access this theme...
On XXKL1 on S8530 I have no problem to download Flash Themes.
Best Regards
Click to expand...
Click to collapse
Might this also be a reason, why Themes from store cannot be installed on Custom ROMs? Might be an explanation...
Jetzt nochmal für Dummies wie mich...
Was geht bei den Themes nicht?
Es gibt 2 Theme Arten...
A = Die mit Flash drinnen. Also das was sich bewegt...
B = Die OHNE Flash, was seit bada 1 rumkrepelt...
Samsung hat sich besonders viel Mühe gegeben... Flash zu schützen...
Deshalb können die *.DCF Dateien weder entpackt, noch installiert werden von Hand... es gibt keine ZIP aka *.smt Datei.
Was genau geht jetzt bei Dir nicht?
MfG
Hy adfree please share your samsung apps test,thanks.
Click to expand...
Click to collapse
I have shared the full SECOND store, here:
http://forum.xda-developers.com/showpost.php?p=29177957&postcount=13
You only need to find Warp Code... maybe.
I have NOT found Warp Code...
I'm using the first leaked Version... QR Code...
And spread over the whole XDA I have given many hints, how to bypass... and/or what you need... to enter this store...
Read carefully this Thread. Download and COMPARE files from Kona...XPKD6.
Maybe one day other users have also Bingo...
Again. This store from XPKD6 is also alive... You can see Screenshots at first post and few posts later from this month...
Remember. XPKD6 is older then 1 year...
Best Regards
Was nicht geht?
Ganz einfach...
Sobald man ein Theme (egal, ob Flash, oder nicht) aus dem Store mit einer CFW lädt, ist dieses nicht einstellbar.
In der Liste installierter Themes wird dieses als "Kopie" des vorherigen Elements in der Liste angezeigt.
Dieses hat auch kein Icon...
Daher mein Verdacht, dass für die Problematik die Versionsprüfung verantwortlich ist.
Denn SMTs gehen ja ohne Probleme...
Sorry for writing in German!
It was only an information for adfree...
Welche Custom? Link
Welches Theme? Link wäre hilfreich...
Gib mir mal Referenz... Kannst mir gerne per PN mitteilen.
Dann seh ich mir das mal mit WinComm an... eventuell erkennt man dann warum...
Dauert 1, 2 Tage...
MfG
Short translation.
Further communication with PM...
Best Regards
Geht um diese ROM...
Soll aber auch bei anderen ROMs auftreten.
Theme ist egal...
Sobald eins ausm Store ist, ist das nicht einstellbar.
Hab ich nicht, kann ich nicht downloaden...
Strato blabla...
Ich hab das komplette Paket nun nochmal neu zusammen gestellt mit den aktualisierten Dateien...
Click to expand...
Click to collapse
Der Link greift auch grad ins Leere...
Also wo kann ich downloaden ?
MfG
Edit 1.
Okay, wenn das die ist, dann downloade ich gerade...
New_S8500 firefly-ROM v2.3.1.zip
Genau die isses...
Wirst aber wohl mit der apps_comressed_MuS8500_firefly_v1.bin arbeiten müssen...
Die gibt es im S8500er-Forum bei Handy-FAQ...
Andernfalls wirst ne schöne Meldung bekommen "modification detected!" Wir arbeiten bereits dran...
Das ist die aktuellste Build...
Andernfalls wirst ne schöne Meldung bekommen "modification detected!" Wir arbeiten bereits dran...
Click to expand...
Click to collapse
1.
Wenn ichs ein 2. Mal starte... komme ich zum Menü + paar Sekunden...
2.
Wenn man RC2 mit Debug Level High lädt... sieht man.
Das FMRadio.so das Problemchen ist.
Ist wohl was beim Ausschalten der Security schief gegangen...
Die *.so sind doch signiert... mit Zertifikaten und so... also Disable...
Später mehr...
MfG
Weiß ich doch...
Bin da schon am rumprobieren...
Mir ist nur was zu den Themes aufgefallen...
Flash-Themes im ZIP-Format sind problemlos nutzbar...
Irgend ein Ansatz?
Irgend ein Ansatz?
Click to expand...
Click to collapse
Habe erstmal aufgegeben und spiele wieder woanders rum...
Komischerweise konnte ich mit dem Appstore nix sehen...
Also Samsung Apps gestartet... nix angezeigt...
Sorry, dann hatte ich erstmal keine Lust mehr...
MfG
AT your OWN risk!
Samsung Server...
1.
All you need is KonaConfig.ini from XPKD6...
2.
Delete few files... maybe read here:
http://forum.xda-developers.com/showpost.php?p=29932768&postcount=49
3.
Replace
8d7uw8z551\Res\KonaConfig.ini
XPKD6 is over 1 year old...
Best Regards
adfree said:
AT your OWN risk!
Samsung Server...
1.
All you need is KonaConfig.ini from XPKD6...
2.
Delete few files... maybe read here:
http://forum.xda-developers.com/showpost.php?p=29932768&postcount=49
3.
Replace
8d7uw8z551\Res\KonaConfig.ini
XPKD6 is over 1 year old...
Best Regards
Click to expand...
Click to collapse
Got in samsung test apps but unable to login
Error
This account cannot be used in this country. Use a different account to sign in (3013)
Click to expand...
Click to collapse
Tried UK account but same Error
Are u able to sign in, if yes then by which region store ?
never mind got it
Thanx for ur hint
@adfreee pls upload your KONA.ini
We go testapps
Are u able to sign in, if yes then by which region store ?
Click to expand...
Click to collapse
I have not researched deeper in this...
Because this is Account App related... rcz4775900...
All I can say...
NO Account is need to download Apps... :angel:
pls upload your KONA.ini
We go testapps
Click to expand...
Click to collapse
1.
I have nearly all uploaded and/or hints given...
2.
This Demo Store from XPKD6 is not the same... what you maybe expect...
Its only an example how important/powerfull KonaConfig.ini is...
Btw... compare KonaConfig.ini from XPKD6, normal Kona and from "Andromeda App"...
http://forum.xda-developers.com/showpost.php?p=29177957&postcount=13
3.
Few settings from KonaConfig.ini is described here:
http://forum.xda-developers.com/showpost.php?p=29090261&postcount=42
few posts..
I can't give full solution. Sorry.
But I think I gave enough hints...
Best Regards
Well...
Did some mods for my CFW...
HTML:
------------------
MenuID LIST
------------------
00: NONE
01: KEYPAD
02: LOGS
03: CONTACTS
04: MESSAGES
05: EMAIL
06: SOCIAL_HUB
07: SETTINGS
08: MUSIC
09: INTERNET
10: MEMO
11: TASK
12: CLOCK
13: FM RADIO
14: CAMERA
15: VOICE RECORDER
16: VIDEO PLAYER
17: GALLERY
18: CALCULATOR
19: CALENDAR
20: MY FILES
21: SEARCH
22: MY ACCOUNTS
23: JAVA
24: IM
25: YOUTUBE
26: NAVIGATION
27: ALL SHARE
28: NFC
29: IM Folder
30: SAT
31: Voice Command
34: Desk Cradle
------------------
MenuType List
------------------
00: SHP App
01: OSP App(Removable, AppID field required)
02: Preloaded OSP App(Unremovable, AppID field required)
03: Java midlet in SHP
04: Java midlet packed in OSP(Not Used)
05: Native URL
06: Bookmark URL
07: Widget App
08: Widget App(Floating)
09: for initiate Folder
10: Preloaded Widget App
11: Preloaded Widget App(Floating)
12: Fixed Native
#Version
Version=1
#Softkey
MenuID3=0
MenuType3=12
#Page0
MenuID0=1
MenuType0=0
MenuID1=3
MenuType1=0
MenuID2=4
MenuType2=0
MenuID3=2
MenuType3=0
MenuID4=9
MenuType4=0
MenuID5=5
MenuType5=0
MenuID6=8
MenuType6=0
MenuID7=26
MenuType7=0
MenuID8=17
MenuType8=0
MenuID9=14
MenuType9=0
MenuID10=19
MenuType10=0
MenuID11=23
MenuType11=0
MenuID12=24
MenuType12=2
AppID12=0rq06e23py
MenuID13=6
MenuType13=0
MenuID14=21
MenuType14=0
MenuID15=27
MenuType15=0
#Page1
MenuID0=7
MenuType0=0
MenuID1=10
MenuType1=0
MenuID2=11
MenuType2=0
MenuID3=20
MenuType3=0
MenuID4=32
MenuType4=0
MenuID5=25
MenuType5=5
MenuID6=16
MenuType6=0
MenuID7=13
MenuType7=0
MenuID8=12
MenuType8=0
MenuID9=18
MenuType9=0
MenuID10=15
MenuType10=0
MenuID11=31
MenuType11=0
// Polaris
MenuID12=0
MenuType12=1
AppID12=06cm35xl2f
// Caster
MenuID13=0
MenuType13=1
AppID13=577yx64nrt
MenuID14=0
MenuType14=1
AppID14=1xd3tvpnc5
MenuID15=22
MenuType15=0
#Page2
MenuID0=34
MenuType0=0
// Facebook
MenuID1=206
MenuType1=3
MenuID2=0
MenuType2=2
AppID2=8d7uw8z551
// Opera Mini
MenuID3=80
MenuType3=3
// Google Maps
MenuID4=163
MenuType4=3
// Song ID
MenuID5=101
MenuType5=3
// BlueFTP
MenuID6=130
MenuType6=3
// eBuddy
MenuID7=220
MenuType7=3
// Song ID
MenuID8=101
MenuType8=3
// BlueFTP
MenuID9=130
MenuType9=3
// eBuddy
MenuID10=220
MenuType10=3
So the Main menu has only one button at the bottom...
With this code it does start...
But I'd also like to insert badaBoard LITE into menu...
I inserted it into CSC file like "kaufDa"- & "HRS"-App (from German LA1) but it does't appear...
Where is the mistake?
You must also add Like this to mainmenu.init
MenuID2=0
MenuType2=2
AppID2=8d7uw8z551
ID=Your app id
hero355 said:
You must also add Like this to mainmenu.init
MenuID2=0
MenuType2=2
AppID2=8d7uw8z551
ID=Your app id
Click to expand...
Click to collapse
Am I right, that the bold marked numbers declare the position?
Is the App correct in CSC or should it be moved to ShpApp.app?
Taxidriver05 said:
Am I right, that the bold marked numbers declare the position?
Is the App correct in CSC or should it be moved to ShpApp.app?
Click to expand...
Click to collapse
1.You are right
2.Except Default applications app should be in CSC.No ShpApp.Because It will give bootloop when you moved to shpapp
hero355 said:
1.You are right
2.Except Default applications app should be in CSC.No ShpApp.Because It will give bootloop when you moved to shpapp
Click to expand...
Click to collapse
Well...
It is not really a "Default"-Application...
I picked the folder from my Wave II with sTune after downloading from app store...
With permission from the developers I'd like to integrate "badaBoard LITE" into my CFW...
I also put the folder into CSC file...
But after flashing it does not apper...
But the other two apps are visible...
You must full flash with new .csc file
With permission from the developers I'd like to integrate "badaBoard LITE" into my CFW...
Click to expand...
Click to collapse
Du weißt aber schon. Das das nicht geht. In einer ungehackten Firmware...
Die Apps aus der Firmware sind mit einem anderen Certificate signiert...
Das 2. Cert ist aus dem SDK...
Das 3. ist nur für den Store...
Best Regards
Okay...
Und austauschen kann ich die Zertifikate nicht einfach?
Hatte gehofft, dass das ähnlich funktioniert wie mit Polaris. Nur,... pack ich das in die ShpApp.app, bekomm ich ne Bootschleife...
Bau ich es in die CSC ein, wird es trotzdem nicht angezeigt, wie die beiden vorinstallierten aus der DBT...
@hero355: I also tried this, but it has no effect...
As adfree said, it seems, that it hast to do wirh certificates...
Na Du kannst maximal 2 verschiedene signierte Versionen haben...
Die aus dem Store, die wir alle ziehen konnten...
Und eine mit dem bada SDK signierte...
Problemchen...
Ich habe mir fast 2 Jahre die Zähne ausgebissen. Das d. SDK Zert in die FW zu integrieren...
Ich habe es bis heute NICHT gebacken bekommen.
Ob es mit dem, was Du so verabscheust funktioniert. Weiß ich nicht.
Aber Standarmäßig ist es unterbunden, andere Zerts in die FW einzuarbeiten.
So das Du keine Samples oder selbst signierte Apps preinstallen kannst...
Also ich kanns wie gesagt nicht.
MfG
Ah...
Okay...
Dann lass ich das erstmal so raus...
Dachte nur, dass es auf vergleichbarem Wege wie mit Polaris machbar wäre...
Maybe a talk in English will help me to understand what you already know
Did you just take installed files with sTune or you catched OAP file ???
Make sure there is no DCF files in your app files
I guess that the certificate thing shouldn't be present now after the Disable integrity check
Best Regards
I took the installed files...
There ARE DCF files in it...
How should I catch the OAP file?
It can help you
http://www.badapps.ru/4342-obhod-zaschity-shifrovaniya-v-bada-20.html
Hmmm...
I am not really familiar with Russian...
And Google translation is not really useful...
There is several ways to catch OAP file
One of those is installing app on SD card
During download you will see OAP file created in /Mount/MMC/Others/DownloadedAppPackages/
Wait until download of the app is complete
During app install copy final OAP file (refresh from a while to another the folder)
That's it
Best Regards
Hmmm...
Somhow download via Kies does not work currently for me...
the way explained above is with using in phone Samsung Apps
Ah...
Okay...
I will check it...
Can I also grab it while installing on phone?
Hidden paritions are visible in my FW...
1.
http://forum.xda-developers.com/showthread.php?t=1717392
2.
I think this is is misunderstanding or big fault...
badaBoard Devs get more trouble then!
Samsung not allow alternate ways of distributing!
Please not bring our Devs in trouble.
Thanx.
Best Regards
Can hardly speak English
Hello, can someone help me with the problem? According to Brick: Redmi Note 5 Pro with: anti_test_note5.zip & anti_test_note5.z01 flashed in EDL mode, it worked, but the display is then dark and no picture can be seen. The device is recognized in the fastboot with ID 0 42e14965. This is the page where I downloaded the anti_test_note5.zip: https://miui.blog/redmi-note-5/miui-unbrick-tweak-arb-error-whyred/ Now I see the mobile phone in the Windows device manager under portable devices as: Redmi Note 5 Or I can switch the cell phone back to EDL mode. But if I want to flash whyred_global_images_V11.0.3.0.PEIMIXM_20191108.0000.00_9.0_global in EDL mode, I only get error messages. How: Error: end of file eof reached 0x80070026 receiving hello packet Error: Fatal error 0x800ffff send confiqure command Error: is not allowed in lock state Error: Bootloader is locked switch to recovery to flash. Flashing when the device appears in the device manager under Redmi Note 5 does not work either. Error: echo missmatching image and device This is in the device manager for portable devices: Redmi Note 5 (if it is important) The device settings for USB \ VID_2717 & PID_FF40 \ 42e14965 were migrated from an earlier operating system installation. last device instance ID: USB \ VID_2717 & PID_FF40 \ 42e14965 Class GUID: {eec5ad98-8080-425f-922a-dabf3de3f69a} Position path: Migration rank: 0x0 present: false The device "USB \ VID_2717 & PID_FF40 \ 42e14965" requires further installations.
---------------------------------------------------------------------------------------------------------
Hallo, kann mir jemand bei dem Problem Helfen?
Nach Brick:
Redmi Note 5 Pro mit:
anti_test_note5.zip & anti_test_note5.z01 im EDL Mode geflasht, hat funktioniert doch das Display ist danach dunkel kein Bild zu sehen.
Das Geerät wird im fastboot mit ID 0 42e14965 erkannt.
Das ist die Seite der wo ich das anti_test_note5.zip herunter geladen habe:
MIUI ROM Unbrick Tweak for Redmi Note 5 ARB Error | MIUI Blog
This is a modified MIUI ROM used to fix error on Redmi Note 5 Pro/Ai/China caused by Anti-roll Back Protection mechanism. This is not a standard MIUI 10 ROM.
miui.blog
Nun sehe ich das Handy im Windows Gerätemanger unter Tragbare Geräte als: Redmi Note 5
Oder ich kann das Handy auch wieder in den EDL Mode versetzen.
Doch will ich nun im EDL Mode die whyred_global_images_V11.0.3.0.PEIMIXM_20191108.0000.00_9.0_global flashen bekomme ich nur Fehlermeldungen.
Wie:Fehler: Ende der datei eof erreicht 0x80070026 receiving hello packet
Fehler: Schwerwiegender Fehler 0x800ffff send confiqure command
Fehler: is not allowed in lock state (ist im Sperrzustand nicht erlaubt )
Fehler: Bootloader is locked switch to recovery to flash.
Auch das Flashen, wenn sich das Gerät im Gerätemanger unter Redmi Note 5 erscheint funktioniert nicht.
Fehler: echo missmatching image und device
Das steht bei im Gerätemanger bei Tragbare Geräte:Redmi Note 5 (Falls es von Bedeutung ist)
Die Geräte Einstellungen für USB\VID_2717&PID_FF40\42e14965 wurden von einer früheren Betriebs System Installation migriert.
letzte Geräte Instanz-ID: USB\VID_2717&PID_FF40\42e14965
Klassen-GUID: {eec5ad98-8080-425f-922a-dabf3de3f69a}
Positions Pfad:
Migrations Rang: 0x0
vorhanden: false
Das Gerät "USB\VID_2717&PID_FF40\42e14965" erfordert weitere Installationen.