[Q] Unrooting my phone. About to give up. Please help. - EVO 4G Q&A, Help & Troubleshooting

I followed the 2 step guide posted here: http://forum.xda-developers.com/showthread.php?t=780141
When trying to load the unrevoked-forever-son.zip, I get this error:
E: unsupported radio version
E: Update failed. Check /sdcard/soff.log.
E: Error in /sdcard/unrevoked (status 42)
When i went to research on how to downgrade the radio version, I find out that newer versions don't let you downgrade.
I'm not even sure what my friend used to unroot my phone. unrevoked or revolutionary?
Here are my stats:
Supersonic EVT2-3 SHIP S-OFF
HBOOT-6.17.0001
MICROP-041f
RADIO-2.15.00.05.02
Please please help. I'm about to give up and cough up the $100 for a new phone as my screen is completely broken. What do I need to do to get this phone unrooted?

Unrevoked s-on is not for your phone. Look for the "how to unroot revolutionary root" its the one with alot of? ?????? In the title. Use the search or Google it
Sent From My Pocket

http://forum.xda-developers.com/showpost.php?p=18399552&postcount=2

Hello,
I am in the same boat. I recently purchased a EVO4G from a friend. The phone was rooted and I would like it to be unrooted. I've tried to unroot myself but it hasn't work. There was a pretty good guide here, http://forum.xda-developers.com/showthread.php?t=780141 that I tried to follow. Unfortunately, I could not get the UnRevoked S ON Tool to work and I ran the PC36IMG.zip file. I seem to be stuck in a loop and I cannot get past the HBOOT screen. Also, when I go to Recovery, I get a Red Triangle with an exclamation point.
The information on the phone is as follows:
SUPERSONIC EVT2-3 SHIP S-OFF
HBOOT-0.79.000
MICROP-041f
TOUCH PANEL-ATMEL226_16ab
RADIO-1.39.00.04.26
Apr 14 2010, 15:41:34
Any help would be greatly appreciated. Should I run the file from the link above?

ALL CREDIT FOR THIS WRITE UP GOES TO CONCORDIUM
1. Download the following zip file http://www.filesonic.com/file/1893573824
2. Rename to PC36IMG.zip
3. Place in root of SD Card (Make sure this is the ONLY PC36IMG.zip file on your SD card)
4. Boot into HBOOT (press & hold the volume down button while pressing the power button)
5. Once in Hboot highlight and select the "Bootloader" option. Allow bootloader to detect the PC36IMG.zip
6. apply the update by pressing the up volume button when prompted. (will take several minutes for update to apply)
7. Check your Hboot to make sure you have S-on. If not, then **CLICK HERE** and follow Captain Throwback's method for getting S-on.
8. Enjoy newly unrooted phone
Zip file will replace EVERYTHING. Stock splash screen, boot animation, up to date OTA release, recovery, S-ON, and HBOOT.
I used this method last night when unrooting my phone because I thought I would have to take my phone into Sprint today. However, running this zip happened to resolve the issue I was having so I turned around and rooted again.
I would give credit to whomever it was I saw this unroot process from but unfortunately it was late and I was sleep deprived so I do not remember. Either way, I do not take credit for it whatsoever. If I come across the one who suggested it I will edit this post and give the credit that user is due.

lmoore55 said:
ALL CREDIT FOR THIS WRITE UP GOES TO CONCORDIUM
1. Download the following zip file
2. Rename to PC36IMG.zip
3. Place in root of SD Card (Make sure this is the ONLY PC36IMG.zip file on your SD card)
4. Boot into HBOOT (press & hold the volume down button while pressing the power button)
5. Once in Hboot highlight and select the "Bootloader" option. Allow bootloader to detect the PC36IMG.zip
6. apply the update by pressing the up volume button when prompted. (will take several minutes for update to apply)
7. Check your Hboot to make sure you have S-on. If not, then **CLICK HERE** and follow Captain Throwback's method for getting S-on.
8. Enjoy newly unrooted phone
Zip file will replace EVERYTHING. Stock splash screen, boot animation, up to date OTA release, recovery, S-ON, and HBOOT.
I used this method last night when unrooting my phone because I thought I would have to take my phone into Sprint today. However, running this zip happened to resolve the issue I was having so I turned around and rooted again.
I would give credit to whomever it was I saw this unroot process from but unfortunately it was late and I was sleep deprived so I do not remember. Either way, I do not take credit for it whatsoever. If I come across the one who suggested it I will edit this post and give the credit that user is due.
Click to expand...
Click to collapse
First let me apologize for being a noob.
I used the RUU method for unrooting my phone. Phone shows S-ON. But HBOOT still shows 6.17.0001. I'm sending the phone back to Sprint for a replacement b/c the charging port is loose.
Can I still use this method to get HBOOT back to factory settings?

lmoore55 said:
ALL CREDIT FOR THIS WRITE UP GOES TO CONCORDIUM
1. Download the following zip file
2. Rename to PC36IMG.zip
3. Place in root of SD Card (Make sure this is the ONLY PC36IMG.zip file on your SD card)
4. Boot into HBOOT (press & hold the volume down button while pressing the power button)
5. Once in Hboot highlight and select the "Bootloader" option. Allow bootloader to detect the PC36IMG.zip
6. apply the update by pressing the up volume button when prompted. (will take several minutes for update to apply)
7. Check your Hboot to make sure you have S-on. If not, then **CLICK HERE** and follow Captain Throwback's method for getting S-on.
8. Enjoy newly unrooted phone
Zip file will replace EVERYTHING. Stock splash screen, boot animation, up to date OTA release, recovery, S-ON, and HBOOT.
I used this method last night when unrooting my phone because I thought I would have to take my phone into Sprint today. However, running this zip happened to resolve the issue I was having so I turned around and rooted again.
I would give credit to whomever it was I saw this unroot process from but unfortunately it was late and I was sleep deprived so I do not remember. Either way, I do not take credit for it whatsoever. If I come across the one who suggested it I will edit this post and give the credit that user is due.
Click to expand...
Click to collapse
OK, I figured out that, for some reason, the MBP was not reading the file as a .zip so I actually zipped it, loaded it onto the SD card and went into Bootloader. It found the file as a bar on the right side of the phone displayed and began to fill up. During this process, the following was on the screen:
Loading
PC36DIAG.ZIP
No Image
Loading
PC36DIAG.nbh
No image
Then after the blue bar fills the screen changes for a second and it says Parsing
Then it goes back to the Fastboot screen.
Any ideas?
Also, someone that unroots phones told me the issue I am having is called a "Soft Brick". Can anyone help?!
Thanks

rigberg said:
OK, I figured out that, for some reason, the MBP was not reading the file as a .zip so I actually zipped it, loaded it onto the SD card and went into Bootloader. It found the file as a bar on the right side of the phone displayed and began to fill up. During this process, the following was on the screen:
Loading
PC36DIAG.ZIP
No Image
Loading
PC36DIAG.nbh
No image
Then after the blue bar fills the screen changes for a second and it says Parsing
Then it goes back to the Fastboot screen.
Any ideas?
Also, someone that unroots phones told me the issue I am having is called a "Soft Brick". Can anyone help?!
Thanks
Click to expand...
Click to collapse
What you are seeing are not the files you are trying to flash. You are trying to flash a PC36IMG.zip file, not a PC36DIAG file. You said you zipped the file on your own. You have to make sure that when it is zipped it is done so as a storage file and not with any type of compression. If you compress the file when it zips then it will not flash. So remove the zip file from your sd card, rezip it using ONLY storage method, recopy it to your SD card and then try to flash it. Make sure it is named PC36IMG.zip EXACTLY as I have written it. Also, make sure there are no other PC36IMG.zip files on your SD card at all. Otherwise you can cause problems.
kvoigt said:
First let me apologize for being a noob.
I used the RUU method for unrooting my phone. Phone shows S-ON. But HBOOT still shows 6.17.0001. I'm sending the phone back to Sprint for a replacement b/c the charging port is loose.
Can I still use this method to get HBOOT back to factory settings?
Click to expand...
Click to collapse
Using that method will send you COMPLETELY back to stock. That method modifies your splash screen, boot animation, operating system, hboot version, radio update, and a few other things. When you flash that file you will be 100% stock, unrooted, and up to date.
rigberg said:
Hello,
I am in the same boat. I recently purchased a EVO4G from a friend. The phone was rooted and I would like it to be unrooted. I've tried to unroot myself but it hasn't work. There was a pretty good guide here, http://forum.xda-developers.com/showthread.php?t=780141 that I tried to follow. Unfortunately, I could not get the UnRevoked S ON Tool to work and I ran the PC36IMG.zip file. I seem to be stuck in a loop and I cannot get past the HBOOT screen. Also, when I go to Recovery, I get a Red Triangle with an exclamation point.
The information on the phone is as follows:
SUPERSONIC EVT2-3 SHIP S-OFF
HBOOT-0.79.000
MICROP-041f
TOUCH PANEL-ATMEL226_16ab
RADIO-1.39.00.04.26
Apr 14 2010, 15:41:34
Any help would be greatly appreciated. Should I run the file from the link above?
Click to expand...
Click to collapse
The red triangle means that you do not have a recovery installed on your phone. If you can get into HBoot then use the method I posted above with the PC36IMG.zip file. That will take care of everything for you in one simple and painless step (including the red triangle).

Concordium said:
What you are seeing are not the files you are trying to flash. You are trying to flash a PC36IMG.zip file, not a PC36DIAG file. You said you zipped the file on your own. You have to make sure that when it is zipped it is done so as a storage file and not with any type of compression. If you compress the file when it zips then it will not flash. So remove the zip file from your sd card, rezip it using ONLY storage method, recopy it to your SD card and then try to flash it. Make sure it is named PC36IMG.zip EXACTLY as I have written it. Also, make sure there are no other PC36IMG.zip files on your SD card at all. Otherwise you can cause problems.
Click to expand...
Click to collapse
Thank you for the help and now pardon my ignorance. What do you mean by zipping using a storage method? Is this normally an option in zip programs? Right now I only have the zip program that comes with OSX and The Unarchiver but I believe that is only for unzipping. Do you have any suggestions? EDIT: I found a program called Keka. Under the options, I picked "Store". I ran the zip, transferred the file to the memory card and the phone did not recognize the file. I even tried to download the file again from the post above and rezipped it using "Store", transferred it and tried again...same result. I am stuck.
In the past, I've tried to rename the file PCIMG36.zip without zipping it and the phone could not find the file.
Thanks

Related

Need to go from AmonRa to Stock Recovery

So, here's where i'm at now after this thread: http://forum.xda-developers.com/showthread.php?t=732505
I still cannot use any usb functionality other than charging, and i'm running unrooted OTA1.47 now.
I'm at the point where i'm needing to get the AmonRa recovery off and the factory recovery back in place, but i can't find out how to do it.
I see a few posts that say to run the ruu, but that involves running the exe while the phone is connected to a windows workstation through usb. With no USB functionality, i'm kind of at a loss on how to proceed.
Any assistance or direction pointing would be greatly appreciated.
Edit: Fixed it.
Using the RUU for 1.47 worked.
I had to open it, then on the first page select "View Readme", then "Save As" for the read me to figure out what directory the temp files went to and what they were named. Looked for rom.zip, copied to my sd card as PC36img.zip. After that, powered on using Power Button and Down volume and let the phone do the rest.
Grabbed the RUU link from here: http://www.shipped-roms.com/shipped/Supersonic/
If you have a card reader/adapter, use your sdcard with the reader and plug it into your pc. Download and move the zip to the card, more specifically the PC36IMG.zip file. Pu the sdcard back in to your phone. Hold Vol up and power the phone, and let it load the zip file.
Isn't that still a rooted rom?
I actually loaded a 1.47 stock rom, using the PC36IMG.zip way of doing it. It didn't return me to the factory screen after selecting Recovery, and still loaded the AmonRa one.
I'll try that with that specific file next. I'm downloading RUU_Supersonic_1.32.651.6_Radio_1.39.00.05.31_release_171253_signed.exe right now to try and extract the factory rom and try that way.
Bump. Still haven't found a way.
When you hold volume down and press power, before you select recovery check on the top and see what version of hboot you have. If you have .76 that means you unlocked the nand and from my understanding this is not reversible yet.
87Octane said:
When you hold volume down and press power, before you select recovery check on the top and see what version of hboot you have. If you have .76 that means you unlocked the nand and from my understanding this is not reversible yet.
Click to expand...
Click to collapse
.79 right now i believe.
All you would need then is a copy of the stock recovery and flash it and that will replace AmonRA. I may have been wrong about un-rooting after unlocking nand. Check out this post: http://forum.xda-developers.com/showthread.php?p=6783326
87Octane said:
All you would need then is a copy of the stock recovery and flash it and that will replace AmonRA. I may have been wrong about un-rooting after unlocking nand. Check out this post: http://forum.xda-developers.com/showthread.php?p=6783326
Click to expand...
Click to collapse
I went through that one, downloaded the ruu, ran it, browsed to my temp files for the zip image, put it on the phone, and received the "older version" error when it tried to read and flash it via renaming it to PC36img.zip
I'm trying to find the 1.47 RUU to try those same steps, but haven't had much luck.
Of course, i'm trying to work and browse the forum at the same time, might not be the best plan. lol
Just found it.
Downloading the 1.47 RUU now. Hopefully this can take care of putting the recovery back to oem.
Good luck and please post results. I am interested in this as well in case I ever have to do it for insurance purposes.
87Octane said:
Good luck and please post results. I am interested in this as well in case I ever have to do it for insurance purposes.
Click to expand...
Click to collapse
Using the RUU for 1.47 worked.
I had to open it, then on the first page select "View Readme", then "Save As" for the read me to figure out what directory the temp files went to and what they were named. Looked for rom.zip, copied to my sd card as PC36img.zip. After that, powered on using Power Button and Down volume and let the phone do the rest.
Grabbed the RUU link from here: http://www.shipped-roms.com/shipped/Supersonic/

[Q] evo won't unroot---Solved!-------

Flashed unrevoked s-on. Put PC36IMG.zip on root of phone. Bootloader doesn't recognize the file. Tried RUU. Gets to waiting for bootloader and stops. Says unable to communicate with device. Can I just flash the PC36IMG.zip from recovery like any other ROM? Don't know what else to do.
Thanks
Solved! This is what I did...
1)Uninstalled and reinstalled HTC drivers
2) Flashed a stock, rooted, odexed ROM. I was running Azrael 4.0. Don't know if this made any difference, but I tried the next steps before flashing the stock ROM and had no success.
3) Booted into FASTBOOT
4)Attached USB cable to computer and the phone immediately showed FASTBOOT USB
5) Ran RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed.exe (this RUU matched my HBOOT and Radio)
6)Followed on-screen directions for RUU and 10 minutes later my phone was unrooted, completely stock.
Your success may vary. I had many people respond with the same mantra of "Do A, B, & C and your phone will be unrooted". By now, we should all know that each phone is different and sometimes they just won't cooperate. Don't get frustrated. Just keep at it and eventually you will solve your dilemma.
Regards,
Mark
Did you make sure that the file is named correctly? All caps, only one zip? When you look at the file in Windows you should only see PC36IMG, the zip extension is automatically hidden. If you can see the zip then delete it.
Also double check that it's on the root of your SD card. I'm only saying this because you said it was on the root of the phone.
(from... Evo/MIUI/Tapatalk)
yea make sure its all caps n doesnt have a double .zip extension like PC36IMG.zip.zip
plainjane said:
Did you make sure that the file is named correctly? All caps, only one zip? When you look at the file in Windows you should only see PC36IMG, the zip extension is automatically hidden. If you can see the zip then delete it.
Also double check that it's on the root of your SD card. I'm only saying this because you said it was on the root of the phone.
(from... Evo/MIUI/Tapatalk)
Click to expand...
Click to collapse
Sorry, I meant to say the root of the SD card. And yes it is PC36IMG.zip on the card, verified in Root Explorer.
SUPERSONIC EVT3 SHIP S-ON
MICROCHIO-041f
TOUCH PANEL-ATMELC03_16ac
HBOOT 2.10.0001
RADIO 2.15.00.11.11.19
HBOOT reads as follows
SD Checking...
Loading...[PC36DIAG.zip]
No Image!
Loading...[PC36DIAG.nbh]
No image or wrong image!
Loading...[PC36IMG.zip]
No image!
Loading...[PC36IMG.nbh]
No image or wrong image!
When I run the RUU, is says it is rebooting to BOOTLOADER, then it reboots to the HTC screen and goes no farther. The RUU says waiting for BOOTLOADER for abut 45 seconds and then says a connection cannot be established.

[q] need help asap!!!!

OK SO, I DONT THINK IM A NOOB, BUT APPARENTLY I AM. MY HTC EVO 4G IS ROOTED, AND IM RUNNING CM7. FOR SOME REASON MY RADIO HAS BEEN ACTING UP. MY CALLS DONT GO OUT, AND MY FRIEND SAYS MY PHONE WOULDNT RING AT ALL. I TRIED TO BACKUP, RESTORE, AND EVEN HARD RESET MY SUPERSONIC. NOW, IM STUCK AT THE BOOT SCREEN. IVE WIPED THE DELVIK, THE DATA, AND THE PARTITION. NOTHING. IT WONT LOAD PAST THE ORIGINAL HTCEVO SCREEN. I DONT KNOW WHAT TO DO. ALLL I REALLY CAN ACCESS IS THE BOOTLOADER, AND RECOVERY. IN RECOVERY, MY SD-EXT WONT LOAD, I CANT CREATE A BACKUP, AND I CANT RESTORE. WELL I CAN, BUT I CANT MAKE IT PAST THE BOOT SCREEEEEEEEN. HELP PPLS. PLEASE.
Click on amonRA in my signature to download its PC36IMG.zip file and place it on the root of your SD card (not in any folder). Turn off your device. Now simultaneously press the DOWN volume button and the power button until your device starts. After a short pause, a few lines of text will flash across the screen. Look at the top of the screen and see if it says "S-OFF". Hopefully, it does. If it displays "S-ON" then you will need to re-root. Anyway, the bootloader *should* auto-detect the file and prompt you to install it. Follow the prompts to install. Installation should take no more than 10 seconds. When it is complete, select recovery from the available options on the left side of the screen. If all went well, you should boot into your new recovery. If so, go to the wipe menu and wipe EVERYTHING in it EXCEPT the SD card. After that, try to flash a rom. Do not attempt to restore a nandroid backup unless your backups were created with amonRA. If you are able to flash a rom, be very patient during the initial boot. It may take a while. Let it finish. Get your mind set to wait 30 minutes even though it shouldn't take that long.
Posting & Replying from my EVO 4G
dougjamal said:
Click on amonRA in my signature to download its PC36IMG.zip file and place it on the root of your SD card (not in any folder). Turn off your device. Now simultaneously press the DOWN volume button and the power button until your device starts. After a short pause, a few lines of text will flash across the screen. Look at the top of the screen and see if it says "S-OFF". Hopefully, it does. If it displays "S-ON" then you will need to re-root. Anyway, the bootloader *should* auto-detect the file and prompt you to install it. Follow the prompts to install. Installation should take no more than 10 seconds. When it is complete, select recovery from the available options on the left side of the screen. If all went well, you should boot into your new recovery. If so, go to the wipe menu and wipe EVERYTHING in it EXCEPT the SD card. After that, try to flash a rom. Do not attempt to restore a nandroid backup unless your backups were created with amonRA. If you are able to flash a rom, be very patient during g the initial boot. It may take a while. Let it finish. Get your mind set to wait 30 minutes even though it shouldn't take that long.
Posting & Replying from my EVO 4G
Click to expand...
Click to collapse
for some reason, i cant place the img on my sd card? its odd but its saying "insert a disk into drive E" unless im doing it wrong, im not sure i can place anything on my sd card without selecting "turn on usb storage" or is there? thanks for the help so far. just a few more tips and ill be on my way.
Can you get to the bootloader and then into recovery from there? If so, then disregard trying to flash amonRA right now. If you can, then select the MS-USB option or its equivalent if your recovery is ClockworkMod to copy a rom or any other file onto the card.
Posting & Replying from my EVO 4G
yea i can. but ive done all. wiped all, and nothing. what EXACTLY should i do?
Since you're able to get to recovery (I am assuming it's ClockworkMod), go to my initial reply and follow the instructions to flash amonRA v2.3 and everything else I stated. In the meantime, I'm going to locate a ruu for you to flash via your PC that *should* get you up and running. By the way, when you boot into the bootloader, what is the hboot version that is listed at the top of the screen?
Posting & Replying from my EVO 4G
dougjamal said:
Since you're able to get to recovery (I am assuming it's ClockworkMod), go to my initial reply and follow the instructions to flash amonRA v2.3 and everything else I stated. In the meantime, I'm going to locate a ruu for you to flash via your PC that *should* get you up and running. By the way, when you boot into the bootloader, what is the hboot version that is listed at the top of the screen?
Posting & Replying from my EVO 4G
Click to expand...
Click to collapse
supersonic evt3 ship s-off
hboot-2.10.0001
microp-041f
touch panel-atmel224_16ab
radio-2.15.00.11.19
oct 15 2010, 12:07:00
and as far as the amon-ra, i cant put it on my sd card at all. so im not sure how to update. man, i thought i knew about all this stuff from a siimple root, rom, and bootloader. guess i still suck i appreciate your help and patience. thank you.
If your hboot is version 2.10, then download the first RUU listed on THIS page. Connect your device via USB to your PC and then initiate the file. I'm preparing for bed. Take care.
Posting & Replying from my EVO 4G
Do u have any way of putting the PC36IMG on the SD card with your computer. Like a SD card adapter or anything? If so take the SD card out of.your phone and try to put the IMG file on it that way
Sent from my PC36100 using XDA Premium App
If u have Clockwork, u can mount the sdcard while in recovery.
Or use another phone to place the img file in the sdcard.
Sent from my PC36100 using XDA Premium App

unrooting

sup everyone. Heres my dilemma. My speaker on my htc evo 4g was crackling (damaged). I have extended warranty but my phone was rooted. i started to unroot it. Put pc36img zip on the root directory and i get a fail-pu,partition up date fail. It does not want to take the update. I have read several and tried to run some of the recommended "how to unroot" procedures. End up with the same problem. Any other suggestions. The s-off. Radio-2.15.00.11.19.
thanks
Unrooting
1. http://unrevoked.com/rootwiki/doku.php/public/forever ; Scroll down to the FAQs, then download the unrevoked s-on zip. This places the security back on your phone, because rooting makes it s-off, and if s-on, quickest way to tell your phone was rooted.
2. Flash that file from recovery, then boot back into the bootloader [vol+down while turning phone on] and verify until its s-on.
3. http://dl.dropbox.com/u/19699565/3.70 RUU Zip.zip ; rename that file to PC36IMG, place on the root of your sdcard [not in a folder] then flash it in the bootloader. When the scan that normally does nothing, it'll detect that file. Apply the update then reboot. That's a stock 3.70 firmware file, it'll take you back to stock, unrooted, s-on.
downloaded s-0n. took out sd and mounted it on my computer. put the s-on on the root directory. removed and put it in my phone. volume down and powered up. hit recovery. results: wrong image. triangle red exclamation point.
rosario04 said:
downloaded s-0n. took out sd and mounted it on my computer. put the s-on on the root directory. removed and put it in my phone. volume down and powered up. hit recovery. results: wrong image. triangle red exclamation point.
Click to expand...
Click to collapse
The problem there is you don't have a recovery loaded. Stock recovery [no recovery] is marked by the triangle and red !.
Go here > http://forum.xda-developers.com/showthread.php?t=705026
Read the first green text , 'bootloader way' to install the recovery. Then repeat the steps of booting into recovery and flashing the s-on after you have amon-ra installed.
Thanks. I followed the the Bootloader way - - Thanks Tiffany84 ^^
Place PC36IMG.zip on the root of your sd card.
Boot the phone into the bootloader by powering the phone down, then press the power and the volume down buttons at the same time.
Once the phone boots into the bootloader the phone will automatically recognize the zip file. It will ask if you would like to update, select yes and let it do it's thing and you will be good to go.
results: radio v2-failed and partition update fail!
update fail!
rooting
rosario04 said:
Thanks. I followed the the Bootloader way - - Thanks Tiffany84 ^^
Place PC36IMG.zip on the root of your sd card.
Boot the phone into the bootloader by powering the phone down, then press the power and the volume down buttons at the same time.
Once the phone boots into the bootloader the phone will automatically recognize the zip file. It will ask if you would like to update, select yes and let it do it's thing and you will be good to go.
results: radio v2-failed and partition update fail!
update fail!
Click to expand...
Click to collapse
Well. After working it I find another file: PC36IMG_SuperSonic_S_Sprint_WWE_3.30.651.3_Radio_2.15. 00.09.01_NV_1.77_003_release_157088-signed. Renamed it PC36IMG and unplugged the usb cable connection from my phone to pc and voila! It took the stock image. I am not sure which one allowed me to load the image update. Would you know?
Now that that part is done i rebooted and the s-off is still there. Should I load the s-on the root directory like you said. I dont want to freak up again.
Many thanks
So mine has tried to load this renamed PC36IMG twice now and seems to be stuck in some kind of loop in HBOOT. This is concerning.
Now it's updating (Parsing) for the second time. I hope it gets it one of these times. I'd rather not buy a new phone

need big help install RUU!!!

unrooting friend's phone, downloaded a stock froyo RUU, have s-on...
when I double click the RUU in windows it says it's changing from fresh rom to this, I hit next, it says rebooting into boot loader, then it says error [155] The ROM update utility cannot update your android phone. Please get the correct rom update utility and try again
so I'm giving up on trying to use an RUU, what I need is the most current stock unrooted rom that I can flash in clockworkmod that will remove clockwork when flashed. any help would be HUGELY appreciated
Like everything else on this site I am not responsible for anything that may, or may not, happen to your phone by following the instructions below. I am simply informing you as to what worked for me.
1. Download the following zip file http://www.filesonic.com/file/1893573824
2. Rename to PC36IMG.zip
3. Place in root of SD Card (Make sure this is the ONLY PC36IMG.zip file on your SD card)
4. Boot into HBOOT (press & hold the volume down button while pressing the power button)
5. Once in Hboot highlight and select the "Bootloader" option. Allow bootloader to detect the PC36IMG.zip
6. apply the update by pressing the up volume button when prompted. (will take several minutes for update to apply)
7. Check your Hboot to make sure you have S-on. If not, then **CLICK HERE** and follow Captain Throwback's method for getting S-on.
8. Enjoy newly unrooted phone
Zip file will replace EVERYTHING. Stock splash screen, boot animation, up to date OTA release, recovery, S-ON, and HBOOT.
I used this method last night when unrooting my phone because I thought I would have to take my phone into Sprint today. However, running this zip happened to resolve the issue I was having so I turned around and rooted again.
I would give credit to whomever it was I saw this unroot process from but unfortunately it was late and I was sleep deprived so I do not remember. Either way, I do not take credit for it whatsoever. If I come across the one who suggested it I will edit this post and give the credit that user is due.
Concordium said:
Like everything else on this site I am not responsible for anything that may, or may not, happen to your phone by following the instructions below. I am simply informing you as to what worked for me.
1. Download the following zip file http://www.filesonic.com/file/1893573824
2. Rename to PC36IMG.zip
3. Place in root of SD Card (Make sure this is the ONLY PC36IMG.zip file on your SD card)
4. Boot into HBOOT (press & hold the volume down button while pressing the power button)
5. Once in Hboot highlight and select the "Bootloader" option. Allow bootloader to detect the PC36IMG.zip
6. apply the update by pressing the up volume button when prompted. (will take several minutes for update to apply)
7. Check your Hboot to make sure you have S-on. If not, then **CLICK HERE** and follow Captain Throwback's method for getting S-on.
8. Enjoy newly unrooted phone
Zip file will replace EVERYTHING. Stock splash screen, boot animation, up to date OTA release, recovery, S-ON, and HBOOT.
I used this method last night when unrooting my phone because I thought I would have to take my phone into Sprint today. However, running this zip happened to resolve the issue I was having so I turned around and rooted again.
I would give credit to whomever it was I saw this unroot process from but unfortunately it was late and I was sleep deprived so I do not remember. Either way, I do not take credit for it whatsoever. If I come across the one who suggested it I will edit this post and give the credit that user is due.
Click to expand...
Click to collapse
Will this RUU work for me?
H-Boot 2.10.0001
Radio-2.15.00.05.02
MICROP-041f
TOUCH PANEL-ATMELC03_16ac
The PC36IMG file will unroot your phone and return it back to stock, but if your bootloader reads S-OFF, it will still read S-OFF afterwards.
To return the phone to S-ON, you would first need to flash the radio that I linked through recovery,
http://www.mediafire.com/?xlhm124ur4bnxln#1
then the unrevoked-forever-S-ON file I attached before running the PC36IMG file.

Categories

Resources