Related
Hi!
After intalling the InsertCoin CM7 with Sense2.1+3.0 GB, and rebooting my htc desire i got stuck in the Home Screen, without any icons and the touchscreen was not working at all!!
Before that i had one Rom for 8 months and with this change i cannot have access to my mobile.
Now i just want to go back to stock to start the proccess over.
Does anyone can help me??? Please!!!
Some info:
I bought my htc desire in France, 07/2010, from Orange, and made a goldcard.
In HBOOT screen:
Bravo Unknown Ship S-ON
HBOOT - 0.75.0000
Microp - 031d
Touch panel - synt0101
Radio - 5.09.05.30_2
Mar 5 2010, 21:12:15
And after some time i got:
SD Checking...
Loading... [PB99DIAG.zip]
No image!
Loading... [PB99DIAG.nbh]
No image or wrong image!
Loading... [PB99IMG.zip]
No image!
Loading... [PB99IMG.nbh]
No image or wrong image!
Can you turn phone off? If not take out the battery and reboot into recovery and restore nandroid backup if you made one. No need to revert to stock you can just go back to your previous good ROM.
xybadog said:
Can you turn phone off? If not take out the battery and reboot into recovery and restore nandroid backup if you made one. No need to revert to stock you can just go back to your previous good ROM.
Click to expand...
Click to collapse
Well... When I go to the recovery mode i got a red triangle... and cannot install any zip file, just update.zip.
try unrooting with RUU
Where I can find these RUU to unroot my phone?
And how I choose the right RUU to use?
http://shipped-roms.com/index.php?category=android&model=Bravo All* RUU's available are here, you should match the RUU as best you can to your network or region. If your phone is unbranded try the latest WWE RUU.
*I think
EDIT: didn't see any Orange RUU's there (Just OTA updates). I'm not really the biggest expert/ fan of unrooting/ using RUU's. Lol someone else get in on this.
Yep! You are right there's no Orange RUU.
And I tried those RUU:
- RUU_Bravo_Froyo_HTC_WWE_2.10.405.2_R_Radio_32.44.00.32U_5.09.05.30_2_release_142828_signed
- RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U_4.05.00.11_release_121865
- RUU_Bravo_HTC_Europe_1.15.405.1_Radio_32.30.00.28U_4.05.00.11_release_121684
- RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4.05.00.11_release_122704
- RUU_Bravo_Vodafone_FR_1.21.163.2_Radio_32.37.00.32U_4.06.00.16_2_release_126985_signed
Until now none of them has worked. I got always the same Error 131, costumer ID error.
I also tried the OTA_Bravrange_CH-FR_2.22.71.2-1.19.72.3_P_release8xcr7nx2a68060l7, rename the file to update.zip and install in recovery mode, but it didn't work.
I will keep trying those RUU... But it doesn't seems to work...
What else can i do??
emm.. you could try extracting the rom.zip and renaming it to PB99IMG.zip and placing it in the root of your sdcard.. but I'd get some more advice first, unrooting & using RUUs isn't exactly my specialty.
Get the latest WWE RUU (you'll need to find out which one this is I don't know)
To get the rom.zip (would post the guide but I can't find it)
1. run the RUU and don't click next, just leave it on the first screen (put it to the side somewhere since it's always on top and will get annoying).
2. Go to start and click "run", or press the windows key and "R". In the dialog box type in "%temp%" (without quote).
3. sort using date (if you hit the little down arror, and select "Today" it makes your job a lot easier), and one of the temp folders will contain all the android stuff, and the file you are looking for is called rom.zip
4. grab the file and put it somewhere where you can remember, rename to PB99IMG.zip (make sure you don't name it PB99IMG.zip.zip since windows does that sometimes for some reason)
5. Put in the root of your sdcard, and boot into bootloader. You will be prompted to install.
But again before you do this get someone elses opinion on this. I don't want to be responsible if something goes wrong.
Thanks for helping bortak!
In the end, i just found my Goldcard, put it in my mobile and used the last WWE RUU.
And everything is fine now!
Thanks again man!
abisconsin said:
Thanks for helping bortak!
In the end, i just found my Goldcard, put it in my mobile and used the last WWE RUU.
And everything is fine now!
Thanks again man!
Click to expand...
Click to collapse
Okay well good to know you managed to get it fixed
I've looked around for solutions as much as I could before posting
I've outlined everything I've done so far, not sure how much is relevant
Was running LeeDrOiD HD V3.3.1 before the phone became bricked
I rebooted the phone at one point, and the battery fell out during a reboot
Next time I rebooted it got to the ascii art android logo, onto a part with text on, and got stuck in a boot loop, the text had a progress part "so&so out of 2703kb" or something to that effect
(can't remember the text exactly)
After a few tries at rebooting it went to the home screen, however nothing loaded onto the home screen for 20 minutes, and the only function that worked was locking the screen, I couldn't turn it off or anything.
After this, everytime I booted it got stuck in a boot-loop on a splash screen of
"ANDROID" in silver writing
This is what I currently get when I boot my phone
When booted into recovery mode (hboot) I first get the message;
SD Checking...
Loading...[PC36DIAG.zip]
No image!
Loading...[PC36DIAG.nbh]
No image or wrong image!
Loading...[PC36IMG.zip]
No image!
Loading...[PC36.IMG.nbh]
No image or wrong image!
Click to expand...
Click to collapse
After I get this message I am free to go into fastboot and recovery menu
The PC recognises the phone in fastboot (I'm running windows 7)
I tried reflashing the leedroid rom straight from the recovery menu, didn't affect anything at all.
Went on to reformat sd card entirely.
Tried updating to the latest ruu, as there was no ruu that was exactly the same as mine, my phone was originally on virgin mobile and there were no ruu's with the same baseband
RUU used; RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
But the update fails part way through (after it reboots the phone) and gives
ERROR 131: CID ERROR
Rom update utility cannot update your phone at this time
Please get the correct rom update utility and try again
Click to expand...
Click to collapse
Current information that hboot gives me;
Bravo PVT1 SHIP S-ON
HBOOT-0.80.0000
TOUCH PANEL-SYNT0101
RADIO-5.11.05.14
Click to expand...
Click to collapse
Can anyone help?
if you can go into recovery, try reflash the zip file again and let it do its job. your hboot is not screwed so it shall restart with a new flash. recommending you download oxygen and save it on your sdcard. due to its fastest to load and most stable.
Just FYI: bootloop is not any kind of brick, and you're not bricked either.
Just do full wipe and reflash the ROM.
If you want to go back stock, you will need goldcard when running RUU.
SD Checking...
Loading...[PC36DIAG.zip]
No image!
Loading...[PC36DIAG.nbh]
No image or wrong image!
Loading...[PC36IMG.zip]
No image!
Loading...[PC36.IMG.nbh]
No image or wrong image!
Click to expand...
Click to collapse
Everyone is getting this upon entering bootloader...
Flashed oxygen, rebooted, left for 5 minutes
I'm still stuck in a boot loop, however the 'ANDROID' text splashscreen is now the 'OXYGEN' splashscreen
Did you do Full Wipe/Factory reset & dalvik cache wipe before flashing new ROM?
Do you have any partitions on SD card?
k3lcior said:
Did you do Full Wipe/Factory reset & dalvik cache wipe before flashing new ROM?
Do you have any partitions on SD card?
Click to expand...
Click to collapse
I wiped both
Yes, I partitioned it as instructed in the stickied noob guide
4GB partioned to 1GB of Ext3, the rest is FAT32. The partition is still there.
Probably something went wrong when you was creating ext partition, what i suggest is downloading this recovery:
http://forum.xda-developers.com/attachment.php?attachmentid=661317&stc=1&d=1311251519 (md5sum zip: 170785457774834c7ae58e331d6f4ab4)
Put it onto your sdcard (root of SD, not in any folders), rename it to "PB99IMG.zip" and boot into bootloader.
It should ask if you want to update, choose yes.
Partition your SD in new recovery, it will also perfectly align it, try to flash with this should be good.
k3lcior said:
Probably something went wrong when you was creating ext partition, what i suggest is downloading this recovery:
http://forum.xda-developers.com/attachment.php?attachmentid=661317&stc=1&d=1311251519 (md5sum zip: 170785457774834c7ae58e331d6f4ab4)
Put it onto your sdcard (root of SD, not in any folders), rename it to "PB99IMG.zip" and boot into bootloader.
It should ask if you want to update, choose yes.
Partition your SD in new recovery, it will also perfectly align it, try to flash with this should be good.
Click to expand...
Click to collapse
Didn't ask if it wanted to update
Text said loading image, A progress bar automatically appeared on the right, after it was done loading, it said 'checking image' then just went straight back into the bootloader
Are you sure you renamed file to PB99IMG.zip ? You can also try to rename it to PB99IMG (without extension)
k3lcior said:
Are you sure you renamed file to PB99IMG.zip ? You can also try to rename it to PB99IMG (without extension)
Click to expand...
Click to collapse
Yep, just double checked and tried a few more times, redownloaded and tried again just to be sure.
When renamed without extension the phone didn't find it, renamed with .zip extension the phone seemed to recognise it, but stopped after saying "checking image"
If you are branded try to put in you gold card and then try...
btw.
What did you used to partition your SD card?
k3lcior said:
If you are branded try to put in you gold card and then try...
btw.
What did you used to partition your SD card?
Click to expand...
Click to collapse
I'm just trying to create a gold card now (didn't know about them until after I flashed)
I used Gparted
You can also try to repartition in the recovery you have right now, might help who knows.
I'm crossing my fingers for the repartitioning from current recovery mode to work
because I'm not entirely sure on how to create a goldcard without being able to boot my phone normally
*edit*
Yes, that did indeed work
seems the file structure got fudged up when the battery fell out for a reboot
such a simple solution that I overlooked at the beginning sorry
Thanks for all your help
Create goldcard and bring your phone back to stock with the ruu you already wanted to use. With three goldcard you won't get the cid error.
Run unrevoked again, but this time you use a custom recovery:
http://downloads.unrevoked.com/recovery/3.21/reflash_package.exe
I can highly recommend rmd recovery:
http://forum.xda-developers.com/showthread.php?t=1137763
Download the zip, extract it and check the md5 of the image.
Standard amonra recovery:
www.android-hilfe.de/attachments/ro...-0-0-14-11-2010-recovery-ra-desire-v2.0.1.zip
Configure your phone correctly for using unrevoked.
Start unrevoked>file>custom recovery>choose the downloaded recovery image.
Run unrevoked.
If successfully done, go into recovery and flash custom rom.
The one k3lcior provided cannot be used as long as one is not s-on. So you cannot use it.
@k3lcior: Take care of this when you tell people to flash this recovery.
Swyped from Oxygen with Transparent XDA App
I followed the 2 step guide posted here: http://forum.xda-developers.com/showthread.php?t=780141
When trying to load the unrevoked-forever-son.zip, I get this error:
E: unsupported radio version
E: Update failed. Check /sdcard/soff.log.
E: Error in /sdcard/unrevoked (status 42)
When i went to research on how to downgrade the radio version, I find out that newer versions don't let you downgrade.
I'm not even sure what my friend used to unroot my phone. unrevoked or revolutionary?
Here are my stats:
Supersonic EVT2-3 SHIP S-OFF
HBOOT-6.17.0001
MICROP-041f
RADIO-2.15.00.05.02
Please please help. I'm about to give up and cough up the $100 for a new phone as my screen is completely broken. What do I need to do to get this phone unrooted?
Unrevoked s-on is not for your phone. Look for the "how to unroot revolutionary root" its the one with alot of? ?????? In the title. Use the search or Google it
Sent From My Pocket
http://forum.xda-developers.com/showpost.php?p=18399552&postcount=2
Hello,
I am in the same boat. I recently purchased a EVO4G from a friend. The phone was rooted and I would like it to be unrooted. I've tried to unroot myself but it hasn't work. There was a pretty good guide here, http://forum.xda-developers.com/showthread.php?t=780141 that I tried to follow. Unfortunately, I could not get the UnRevoked S ON Tool to work and I ran the PC36IMG.zip file. I seem to be stuck in a loop and I cannot get past the HBOOT screen. Also, when I go to Recovery, I get a Red Triangle with an exclamation point.
The information on the phone is as follows:
SUPERSONIC EVT2-3 SHIP S-OFF
HBOOT-0.79.000
MICROP-041f
TOUCH PANEL-ATMEL226_16ab
RADIO-1.39.00.04.26
Apr 14 2010, 15:41:34
Any help would be greatly appreciated. Should I run the file from the link above?
ALL CREDIT FOR THIS WRITE UP GOES TO CONCORDIUM
1. Download the following zip file http://www.filesonic.com/file/1893573824
2. Rename to PC36IMG.zip
3. Place in root of SD Card (Make sure this is the ONLY PC36IMG.zip file on your SD card)
4. Boot into HBOOT (press & hold the volume down button while pressing the power button)
5. Once in Hboot highlight and select the "Bootloader" option. Allow bootloader to detect the PC36IMG.zip
6. apply the update by pressing the up volume button when prompted. (will take several minutes for update to apply)
7. Check your Hboot to make sure you have S-on. If not, then **CLICK HERE** and follow Captain Throwback's method for getting S-on.
8. Enjoy newly unrooted phone
Zip file will replace EVERYTHING. Stock splash screen, boot animation, up to date OTA release, recovery, S-ON, and HBOOT.
I used this method last night when unrooting my phone because I thought I would have to take my phone into Sprint today. However, running this zip happened to resolve the issue I was having so I turned around and rooted again.
I would give credit to whomever it was I saw this unroot process from but unfortunately it was late and I was sleep deprived so I do not remember. Either way, I do not take credit for it whatsoever. If I come across the one who suggested it I will edit this post and give the credit that user is due.
lmoore55 said:
ALL CREDIT FOR THIS WRITE UP GOES TO CONCORDIUM
1. Download the following zip file
2. Rename to PC36IMG.zip
3. Place in root of SD Card (Make sure this is the ONLY PC36IMG.zip file on your SD card)
4. Boot into HBOOT (press & hold the volume down button while pressing the power button)
5. Once in Hboot highlight and select the "Bootloader" option. Allow bootloader to detect the PC36IMG.zip
6. apply the update by pressing the up volume button when prompted. (will take several minutes for update to apply)
7. Check your Hboot to make sure you have S-on. If not, then **CLICK HERE** and follow Captain Throwback's method for getting S-on.
8. Enjoy newly unrooted phone
Zip file will replace EVERYTHING. Stock splash screen, boot animation, up to date OTA release, recovery, S-ON, and HBOOT.
I used this method last night when unrooting my phone because I thought I would have to take my phone into Sprint today. However, running this zip happened to resolve the issue I was having so I turned around and rooted again.
I would give credit to whomever it was I saw this unroot process from but unfortunately it was late and I was sleep deprived so I do not remember. Either way, I do not take credit for it whatsoever. If I come across the one who suggested it I will edit this post and give the credit that user is due.
Click to expand...
Click to collapse
First let me apologize for being a noob.
I used the RUU method for unrooting my phone. Phone shows S-ON. But HBOOT still shows 6.17.0001. I'm sending the phone back to Sprint for a replacement b/c the charging port is loose.
Can I still use this method to get HBOOT back to factory settings?
lmoore55 said:
ALL CREDIT FOR THIS WRITE UP GOES TO CONCORDIUM
1. Download the following zip file
2. Rename to PC36IMG.zip
3. Place in root of SD Card (Make sure this is the ONLY PC36IMG.zip file on your SD card)
4. Boot into HBOOT (press & hold the volume down button while pressing the power button)
5. Once in Hboot highlight and select the "Bootloader" option. Allow bootloader to detect the PC36IMG.zip
6. apply the update by pressing the up volume button when prompted. (will take several minutes for update to apply)
7. Check your Hboot to make sure you have S-on. If not, then **CLICK HERE** and follow Captain Throwback's method for getting S-on.
8. Enjoy newly unrooted phone
Zip file will replace EVERYTHING. Stock splash screen, boot animation, up to date OTA release, recovery, S-ON, and HBOOT.
I used this method last night when unrooting my phone because I thought I would have to take my phone into Sprint today. However, running this zip happened to resolve the issue I was having so I turned around and rooted again.
I would give credit to whomever it was I saw this unroot process from but unfortunately it was late and I was sleep deprived so I do not remember. Either way, I do not take credit for it whatsoever. If I come across the one who suggested it I will edit this post and give the credit that user is due.
Click to expand...
Click to collapse
OK, I figured out that, for some reason, the MBP was not reading the file as a .zip so I actually zipped it, loaded it onto the SD card and went into Bootloader. It found the file as a bar on the right side of the phone displayed and began to fill up. During this process, the following was on the screen:
Loading
PC36DIAG.ZIP
No Image
Loading
PC36DIAG.nbh
No image
Then after the blue bar fills the screen changes for a second and it says Parsing
Then it goes back to the Fastboot screen.
Any ideas?
Also, someone that unroots phones told me the issue I am having is called a "Soft Brick". Can anyone help?!
Thanks
rigberg said:
OK, I figured out that, for some reason, the MBP was not reading the file as a .zip so I actually zipped it, loaded it onto the SD card and went into Bootloader. It found the file as a bar on the right side of the phone displayed and began to fill up. During this process, the following was on the screen:
Loading
PC36DIAG.ZIP
No Image
Loading
PC36DIAG.nbh
No image
Then after the blue bar fills the screen changes for a second and it says Parsing
Then it goes back to the Fastboot screen.
Any ideas?
Also, someone that unroots phones told me the issue I am having is called a "Soft Brick". Can anyone help?!
Thanks
Click to expand...
Click to collapse
What you are seeing are not the files you are trying to flash. You are trying to flash a PC36IMG.zip file, not a PC36DIAG file. You said you zipped the file on your own. You have to make sure that when it is zipped it is done so as a storage file and not with any type of compression. If you compress the file when it zips then it will not flash. So remove the zip file from your sd card, rezip it using ONLY storage method, recopy it to your SD card and then try to flash it. Make sure it is named PC36IMG.zip EXACTLY as I have written it. Also, make sure there are no other PC36IMG.zip files on your SD card at all. Otherwise you can cause problems.
kvoigt said:
First let me apologize for being a noob.
I used the RUU method for unrooting my phone. Phone shows S-ON. But HBOOT still shows 6.17.0001. I'm sending the phone back to Sprint for a replacement b/c the charging port is loose.
Can I still use this method to get HBOOT back to factory settings?
Click to expand...
Click to collapse
Using that method will send you COMPLETELY back to stock. That method modifies your splash screen, boot animation, operating system, hboot version, radio update, and a few other things. When you flash that file you will be 100% stock, unrooted, and up to date.
rigberg said:
Hello,
I am in the same boat. I recently purchased a EVO4G from a friend. The phone was rooted and I would like it to be unrooted. I've tried to unroot myself but it hasn't work. There was a pretty good guide here, http://forum.xda-developers.com/showthread.php?t=780141 that I tried to follow. Unfortunately, I could not get the UnRevoked S ON Tool to work and I ran the PC36IMG.zip file. I seem to be stuck in a loop and I cannot get past the HBOOT screen. Also, when I go to Recovery, I get a Red Triangle with an exclamation point.
The information on the phone is as follows:
SUPERSONIC EVT2-3 SHIP S-OFF
HBOOT-0.79.000
MICROP-041f
TOUCH PANEL-ATMEL226_16ab
RADIO-1.39.00.04.26
Apr 14 2010, 15:41:34
Any help would be greatly appreciated. Should I run the file from the link above?
Click to expand...
Click to collapse
The red triangle means that you do not have a recovery installed on your phone. If you can get into HBoot then use the method I posted above with the PC36IMG.zip file. That will take care of everything for you in one simple and painless step (including the red triangle).
Concordium said:
What you are seeing are not the files you are trying to flash. You are trying to flash a PC36IMG.zip file, not a PC36DIAG file. You said you zipped the file on your own. You have to make sure that when it is zipped it is done so as a storage file and not with any type of compression. If you compress the file when it zips then it will not flash. So remove the zip file from your sd card, rezip it using ONLY storage method, recopy it to your SD card and then try to flash it. Make sure it is named PC36IMG.zip EXACTLY as I have written it. Also, make sure there are no other PC36IMG.zip files on your SD card at all. Otherwise you can cause problems.
Click to expand...
Click to collapse
Thank you for the help and now pardon my ignorance. What do you mean by zipping using a storage method? Is this normally an option in zip programs? Right now I only have the zip program that comes with OSX and The Unarchiver but I believe that is only for unzipping. Do you have any suggestions? EDIT: I found a program called Keka. Under the options, I picked "Store". I ran the zip, transferred the file to the memory card and the phone did not recognize the file. I even tried to download the file again from the post above and rezipped it using "Store", transferred it and tried again...same result. I am stuck.
In the past, I've tried to rename the file PCIMG36.zip without zipping it and the phone could not find the file.
Thanks
First off, I know there are a lot of posts with this problem. Mine seems to be slightly different or I'm just stupid. (Probably the latter) Anyway, Desire HD stuck at hboot. S-OFF, cant get into recover either. SD card is blank. Here is what it says at the screen.
ACE PVT SHIP S-OFF
HBOOT-0.85.0007
MICROP-0438
RADIO-26.03.02.26_M
eMMC-boot
and a date.
Also, I usually pay people to root my phone but I cant do it this time around. I updated the ROM and now this. Please help! I can pay you if you can figure it out.
Thank you so much
Are there no options or text below the date? It should say "HBOOT" or "FASTBOOT" and present a small menu of coloured text options.
Also, what ROM did you update before this happened?
It would be good to know exactly what steps led to your problem before suggesting how to fix this. Try to give as much detail as you can.
It says Hboot. and yes, has the options below. The last update was for Cyanogen 7.0 but didnt like it. I went to go back and just recover the back up of what I had because I liked what was on there and yeah, didnt work out so well. Got to love your friends. lol
I have tried bortaks troubleshooting guide and flash a new recovery using android flasher but that doesnt seem to be working either. When I go to recovery, its just sticks me to the splash screen and wont do nothing.
Firstly, as long as you have a working bootloader, your phone isn't bricked and can be recovered.
Well it seems you are Radio S-Off (Ship S-Off), but you also need Eng S-Off to flash a recovery from the command line using fastboot.exe. I'm pretty sure danward's Android Flasher uses fastboot, so I'm not surprised it didn't work.
What to do next depends on whether you can get access to your sdcard from your PC. If you can - with a card reader in the PC, or another phone to put the card in and connect via USB - then go here:
http://forum.xda-developers.com/showthread.php?t=905003
Download the stock 1.32 PD98IMG.zip ROM from Section 1 and put it on the root of your SD card. Then put the card back in your DHD, and reboot into the bootloader.
It should recognise the PD98IMG.zip file and ask if you want to flash it, press Volume Up to confirm. This will put the stock 1.32.405.6 HTC ROM on your phone - this is an early shipped HTC firmware and it's the easiest version to root.
Edit: Note this file and the RUU below are for a Desire HD, and I don't think they will work on an Inspire - see later in the thread for some links to Inspire files.
Once it's flashed, it will replace everything - ROM, Recovery, radio - with the stock versions so you'll need to use the hack kit again, but you should still have Radio S-Off. Also remove the PD98IMG.zip file from your SD card when done, otherwise each time you go into the bootloader it will ask if you want to flash it.
If for any reason you can't get the PD98IMG.zip onto your SD card, you could try running an RUU (Rom Update Utility), this is the official HTC firmware in an EXE file you run from your PC. Plug your phone in via the USB cable and run the RUU file. You can find them here:
http://forum.xda-developers.com/showthread.php?p=19101263#post19101263
The 1.32 version isn't there, so I would go for the next oldest WWE version (WWE = world wide edition, i.e. not carrier-branded)
RUU_Ace_HTC_WWE_1.72.405.3_R_Radio_12.28e.60.140f_26.04.02.17_M2_release_161342_signed.exe
If that runs, it will do the same as the PD98IMG.zip, i.e. put your phone back to stock HTC firmware, but once again you will retain Radio S-Off.
I don't know much about the Ace Hack Kit as I rooted my phone before it came out, but I'm pretty sure that it will root either of those two versions of the stock firmware just fine. Good luck!
I downloaded it 3 times from 2 different sources, put it on my sd card, still nothing. Am I doing anything wrong?
Is you USB cable still connected? If it is, the bootloader will go into FASTBOOT mode, and you need to be in HBOOT mode. What does it say under the date, fastboot or hboot?
If it says fastboot, just pull the USB cable out and reboot the phone.
Otherwise I'm not sure why it's not working.
I tried both ways. hboot and fast boot. All you need to do is start the phone up on h boot right? It runs through those codes looking for it and says not found on all 4 of them.
Uonites said:
I tried both ways. hboot and fast boot. All you need to do is start the phone up on h boot right? It runs through those codes looking for it and says not found on all 4 of them.
Click to expand...
Click to collapse
This is probably a stupid question, but it is definitely a Desire HD, right?
What file names does it say it's looking for when it runs through the codes, does it definitely say PD98DIAG and PD98IMG?
Maybe try the RUU method instead?
Inspire from ATT, same thing right? Its says
sd checking....
loading....[PD98DIAG.zip]
No Image
Loading....[PD98DIAG.nbh]
No Image or Wrong Image
Loading....[PD98img.zip]
No Image
Loading......[PD98img.nbh]
No Image or wrong image.
I would try the other method but I cant find android 1.0 usb driver that it apparently needs. It will still flash though for some reason. What do you think?
The file is definitely called PD98IMG.zip and is on the root of your sd card?
Edit: Any drivers should be installed when you install HTC Sync on your PC, if you haven't done this already get it here:
http://www.htc.com/www/help/
PD98IMG is the file name and its a compressed file so that would make .zip. correct? I have nothing else on the sd card, just that.
Hmm, do you know how to turn on filename extensions in Windows?
For Win7, go to My Computer, Organize menu, then Folder & Search Options. Click on to the View tab and un-tick "Hide extensions for known file types".
Then check the filename again and make sure it ends .zip, and not .rar or something else. Some browsers can change the file name when downloading zip files.
Weird, though. I've just tried a PD98IMG.zip on my phone to check my instructions and it should be okay. I'm not so familiar with the Inspire, but if it's looking for a PD98IMG.zip you should be fine. I think the main difference is in sound files, but the ROMs are otherwise the same.
I checked it. Yes, it is named exactly that. I wonder why it wont run?
I think it's because it's an Inspire. Inside the PD98IMG.zip is a file called android-info.txt, and the first line of that is
Code:
modelid: PD9810000
The model ID for the Inspire is (I think) PD9812000. So it's not recognising the zip as valid.
You'll need a PD98IMG.zip specifically for an Inspire. Maybe check the Inspire forums? Although the phones are very similar they're not 100% the same, and folks there might know which file you need, or where to find the right RUU. Sorry, I didn't realise the PD98IMG file would need to be different.
You might just be able to replace the android-info.txt file inside the zip with one from an Inspire, not sure if that would work though.
Edit: Also, for the RUU you probably need the US-specific file, which is RUU_Ace_Cingular_US_1.80.502.3_Radio_12.39.60.19_26.06.04.14
Edit2: Found this PD98IMG.zip which is for an Inspire, it's the same 1.80.502.3 version mentioned above.
http://www.multiupload.com/JELMZNSKDF
I think I found the file for the Inspire. I'm going to try that next. As far as that last post, That is way over my head, lol.
Good luck! The file linked above at the multiupload address is definitely an Inspire version, so try that if the one you found doesn't work. I'm off now but will check this thread again in the morning just in case.
Thank you so much for your help. I'll post and tell you what happened
Happened to me once, if push comes to shove down load stock Rom from dev section. It is an .exe file that will restore your DHD back to stock from h-boot u will have to root your phone again though ! Good luck
Sent from my Desire HD RCMix 4.0
Hi everyone. I'm HTC desire user. On my HTC desire is installed mod OxyZM1.2, which as i read on google should be called ROM. The point is, that i don't like it and i want my phone to be default, i want my phone go back to stock ROM. I've been searching lessons but can't find it, so i wish you guys can help me. My HTC Desire using Android 2.3.7. Thanks.
zydrikis said:
Hi everyone. I'm HTC desire user. On my HTC desire is installed mod OxyZM1.2, which as i read on google should be called ROM. The point is, that i don't like it and i want my phone to be default, i want my phone go back to stock ROM. I've been searching lessons but can't find it, so i wish you guys can help me. My HTC Desire using Android 2.3.7. Thanks.
Click to expand...
Click to collapse
In my sig you will find the 2.3 RUU for the Desire. Download it, then put the PB99IMG.zip on the root of your sd-card (Like, not in a folder). Then boot in hboot, and select yes. Your phone should be stock.
Make sure you have stock hboot.
abaaaabbbb63 said:
In my sig you will find the 2.3 RUU for the Desire. Download it, then put the PB99IMG.zip on the root of your sd-card (Like, not in a folder). Then boot in hboot, and select yes. Your phone should be stock.
Make sure you have stock hboot.
Click to expand...
Click to collapse
How i can make sure that my hboot is stock?
Boot in hboot, and tell me what's written there.
abaaaabbbb63 said:
Boot in hboot, and tell me what's written there.
Click to expand...
Click to collapse
-Revolutionary-
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.1705.23
AUG 10 2010,17:52:18
zydrikis said:
-Revolutionary-
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.1705.23
AUG 10 2010,17:52:18
Click to expand...
Click to collapse
First, from recovery, do a backup, just in case. You know how to do that right? (Enter recovery, select backup, wait)
Just to make sure, download the PB99IMG downgrade from here:
http://alpharev.nl/ (It's the last one in the table)
If you have an sd-card reader:
Put it on your sd-card, then boot in hboot, then select "Yes".
After that, delete the PB99IMG.zip from your sd-card , put the RUU PB99IMG.zip (I know, it's confusing, but stay with me), boot in hboot, then select yes again.
In case you don't have a card reader, then you will have to flash the downgrade through fastboot. Check my sig how to set it up. In this case, extract the .img from the downgrade pb99img zip, open cmd, connect your phone in fastboot, open CMD, and type "fastboot flash hboot <img path>". And then put the RUU PB99IMG.zip on your sd-card, boot in hboot, and select yes.
Recovery opens in clockwork mode, does that make any difference?
And don't i need to wipe data and cache? Just make backup, instal that downgrade and then instal that RUU and that's all?
zydrikis said:
Recovery opens in clockwork mode, does that make any difference?
And don't i need to wipe data and cache? Just make backup, instal that downgrade and then instal that RUU and that's all?
Click to expand...
Click to collapse
Clockworkmode works. Just backup.
I explained everything like for a newbie, like you said in the title
Yeah,, that's all you need to do.
As you said, that's really confusing. Ok, thanks, i'm trying to make it now..
Boot in hboot and select yes, but there are no yes to select when i enter hboot it just says:
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
Maybe i just i need to install that downgrade zip file from SD card in clockwrokmod recovery?
Sorry
Are you sure you have the PB99IMG.zip (renane it if it's not called that way) on the root of the sd-card?
Well, yes..
Weird. Then flash it through fastboot.
And after all that if it will works my phone will be unrooted? And android will stay in the same version or not?
You will be unrooted, but then you can very easily root using revolutionary.
You will have android 2.3.3
When i enter hboot and when it reads zip file on sd card it writes that there are no img file or smth
hope you still have patience for me
Thats the message telling you that it didn't find any pb99img.zip on the root of the sd-card.
Again, are you sure that you put the exactly named "pb99img.zip" outside any folder on your sd, and that you have the correct one?
that is weird.. Well yes, name is exatly like yours and i just pick that zip file on my sd card not in any folder on sd
on boot it says:
SD checking...
Loading...[PB99DIAG.zip]
No image!
Loading...[PB99DIAG.nbh]
No image or wrong image!
Loading...[PB99IMG.zip]
No image!
Loading...[PB99IMG.nbh]
No image or wrong image!
i took my other sd card, formated it and now it works, so i'm going to instal it, hope it will be fine...
download this file attached (downgrade.img) and put it on ur sdcard (not in a folder) boot into bootloader, volume down + power then bootloader will find PB99IMG and ask u to update, volume up for yes. then just follow abaaaabbbb63 instructions or what ever it is ur trying to do.
md5 : 0d9040a9f7e02089bb064099270ecceb