Related
I've been going nuts with this problem, that if the phone is being charged with usb cable plugged in, when I press "Power off" the phone will shut down and automatically restarts itself.
If I unplug the cable the phone can power off fine, but when it's in power off state, as soon as I plug in the cable, it starts itself automatically just as if I pressed and held the power button which I didn't.
What's going on?????????? Please help.
Clarify: it's not that the screen turns on, it's the phone actually turns on / boots / starts.
EDIT:
Did a little research, my problem is the same as here:
http://forum.xda-developers.com/showthread.php?t=1209918
http://forum.xda-developers.com/showthread.php?t=689248
I noticed with mine, the only time it started up automatically was when I didn't have the USB cable plugged in fully to the wall charger.
I think that the phone can somehow detect either resistance or capacitance changes in the USB connection and turns on under certain circumstances, while it is supposed to stay off if the resistance / capacitance values are "normal".
it's normal for the screen to turn ON when you plug in the USB cable
it's NOT normal for the Phone to turn ON from OFF when you plug in the USB cable
the normal behaviour for when the Phone is completely OFF when you plug in the USB cable it should just show you the green battery meter charging
AllGamer said:
it's normal for the screen to turn ON when you plug in the USB cable
it's NOT normal for the Phone to turn ON from OFF when you plug in the USB cable
the normal behaviour for when the Phone is completely OFF when you plug in the USB cable it should just show you the green battery meter charging
Click to expand...
Click to collapse
The phone turns on.
maybe it's a defective unit?
have you tried going back to stock?
AllGamer said:
maybe it's a defective unit?
have you tried going back to stock?
Click to expand...
Click to collapse
I doubt it's a defective unit because it used to be fine. Just happened yesterday.
Everything is stock right now.
try a different charger/cable. if it still happens return it.
I had this problem after wiping my battery status and draining it all the way down. After charging over night, I then ran battery calibrator the next day and when i ran it all the way down again and plugged it in the problem was solved. Hasnt happened since (since 2 days ago when this happened anyway).
very interesting
Mine turns on when I plug in a usb cable while the phone is turned off following a battery stuck at 100% condition. In other words, if my phone is stuck at 100% (usually every time after charging), and I turn the phone off, and then plug in the usb cable, the phone will turn on by itself. But if my phone is not stuck at 100%, and I turn the phone off and then plug in the cable, I get the green battery.
Today I had my One X happily connected to my pc, just transferring some files over by USB. Then when I wanted to disconnect it, it showed a lot of 'not getting enough current to charge and operate at the same time' messages. Dismissed them all, though it was time to put it on the wall charger, seen it's critical battery status.
Once I disconnected the phone, it immediately powered off and would not come back to life again. It was, however, greeting me with a flashing red light while on the wall charger. No matter what I tried (bootloader, long hold power button, charge it for some time), it remained completely dead.
Now I did get some new micro usb cables from eBay. Very cheap ones. Now I think these are the culprit. Apparently, while in file transfer mode, these cables were unable to provide sufficient current, causing the phone to drain the battery completely. Once I wanted to charge it, it couldn't boot to charger mode due to the battery being completely empty.
Hooking up with the original HTC cable again, it still showed the red flashing light. Exact same behavior. Until I (for the heck of it) tried to bash the power button quickly. It suddenly came back to life again and started charging again through PC.
If you find yourself in the same situation with bad USB leads (something to do with resistance of the cable?) or a red blinking light, try tapping the power button quickly instead of trying to boot into recovery mode. It might save you a postal return and a week or 3. Or your ass, if you rooted it before it stopped charging.
When I had my sensation I had this every now and then. I had to remove the battery to get it to work.. Nice to know that there appears to be something I can do to sort this out if I get this now
BLAST3RR said:
Today I had my One X happily connected to my pc, just transferring some files over by USB. Then when I wanted to disconnect it, it showed a lot of 'not getting enough current to charge and operate at the same time' messages. Dismissed them all, though it was time to put it on the wall charger, seen it's critical battery status.
Once I disconnected the phone, it immediately powered off and would not come back to life again. It was, however, greeting me with a flashing red light while on the wall charger. No matter what I tried (bootloader, long hold power button, charge it for some time), it remained completely dead.
Now I did get some new micro usb cables from eBay. Very cheap ones. Now I think these are the culprit. Apparently, while in file transfer mode, these cables were unable to provide sufficient current, causing the phone to drain the battery completely. Once I wanted to charge it, it couldn't boot to charger mode due to the battery being completely empty.
Hooking up with the original HTC cable again, it still showed the red flashing light. Exact same behavior. Until I (for the heck of it) tried to bash the power button quickly. It suddenly came back to life again and started charging again through PC.
If you find yourself in the same situation with bad USB leads (something to do with resistance of the cable?) or a red blinking light, try tapping the power button quickly instead of trying to boot into recovery mode. It might save you a postal return and a week or 3. Or your ass, if you rooted it before it stopped charging.
Click to expand...
Click to collapse
It was mentioned that the flashing red (or orange?) meant that the temp was too high.
Just let it cool down, and it will come back.
It definitely wasn't hot. Also, it wasn't flashing orange. Just slowly red.
BLAST3RR said:
It definitely wasn't hot. Also, it wasn't flashing orange. Just slowly red.
Click to expand...
Click to collapse
Same situation when I had my sensation
Sent from my HTC One X using xda premium
BLAST3RR said:
It definitely wasn't hot. Also, it wasn't flashing orange. Just slowly red.
Click to expand...
Click to collapse
Your quite right. Overheating on charge flashes red then green. Never seen a flashing red so can't comment
Sent from my HTC One X using XDA
bagofcrap24 said:
Your quite right. Overheating on charge flashes red then green. Never seen a flashing red so can't comment
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
Ah, I have had that once while playing games and having my HOX on charge
Sent from my HTC One X using xda premium
Someone has also posted
flashing orange - low battery
flashing red - very low battery
It could well be the battery level is considered too low to operate. So to protect the circuit and the battery, the device is not allowed to turn on until it is sufficiently charged.
This is currently (no pun intended) happening to my one x, left it plugged into my pc via the htc usb and got flashing red light after a couple of minutes, after a couple of minutes more it stopped flashing and became a solid red light (a sign it is charging from v low battery from m experience) pressed the power button and voilĂ its come back on. I can't believe htc would let the device get to such a critical state of battery before powering down, can anyone enlighten me as to why it would do this?
(thinking about it i was showcasing the handset to my apple touting buddy and had 3 pretty heavy apps running, it was a couple of hours after i noticed it had killed itself so i'm guessing they were still draining away the power from the background??)
I'm having the same problem. My phone was off when i got home and it wouldn't turn on (I assume the battery was dead). When I put it on the wall charger the red the red light didn't turn on and my phone wouldn't boot. I tried several chargers and cables and also tried to connect it to my pc. After leaving the phone for a few hours (unplugged) i tried to connect it to my pc again and i got the blinking red light. A few minutes later I decided to plug it into the wall and the red light turned on and now it is working normally.
anyone got an idea why it didn't charge at first?
agree chaging cable fixed my flashing red light problem
Poor quality charging/data cable
A poor quality charging/data cable will also impact the ability to charge the HOX in your car. I have two cars, in one I was using an old Blackberry cable and Griffin charge adapter (1amp output) to charge the phone whilst using Car Dock and navigation software. After trial and error I got the screen brightness correct and the phone charged satisfactorily. I say satisfactorily because I still think any electronic device which is connected to an external power supply of sufficient electrical current should operate and charge at full spec. In my other car (1996 Land Rover Discovery) I was using a cheap ebay charging/data cable. Using the same apps and screen brightness the HOX would lose all charge over about a two hour period. With the same Blackberry cable used in my other car, no problem. Hence the cheap ebay cables are now in the bin.
BLAST3RR said:
Today I had my One X happily connected to my pc, just transferring some files over by USB. Then when I wanted to disconnect it, it showed a lot of 'not getting enough current to charge and operate at the same time' messages. Dismissed them all, though it was time to put it on the wall charger, seen it's critical battery status.
Once I disconnected the phone, it immediately powered off and would not come back to life again. It was, however, greeting me with a flashing red light while on the wall charger. No matter what I tried (bootloader, long hold power button, charge it for some time), it remained completely dead.
Now I did get some new micro usb cables from eBay. Very cheap ones. Now I think these are the culprit. Apparently, while in file transfer mode, these cables were unable to provide sufficient current, causing the phone to drain the battery completely. Once I wanted to charge it, it couldn't boot to charger mode due to the battery being completely empty.
Hooking up with the original HTC cable again, it still showed the red flashing light. Exact same behavior. Until I (for the heck of it) tried to bash the power button quickly. It suddenly came back to life again and started charging again through PC.
If you find yourself in the same situation with bad USB leads (something to do with resistance of the cable?) or a red blinking light, try tapping the power button quickly instead of trying to boot into recovery mode. It might save you a postal return and a week or 3. Or your ass, if you rooted it before it stopped charging.
Click to expand...
Click to collapse
Many thanks to you good sir!!!
NorthS said:
Hence the cheap ebay cables are now in the bin.
Click to expand...
Click to collapse
The HTC-cable isn't that good too. I use a Nokia-charger to charge my HOX. Charging is much quicker. Maybe the HTC--charger (and cable) was crappy but i never touch them, i use the Nokia charger and dito USB cable.
Thank you!
blast3rr said:
today i had my one x happily connected to my pc, just transferring some files over by usb. Then when i wanted to disconnect it, it showed a lot of 'not getting enough current to charge and operate at the same time' messages. Dismissed them all, though it was time to put it on the wall charger, seen it's critical battery status.
Once i disconnected the phone, it immediately powered off and would not come back to life again. It was, however, greeting me with a flashing red light while on the wall charger. No matter what i tried (bootloader, long hold power button, charge it for some time), it remained completely dead.
Now i did get some new micro usb cables from ebay. Very cheap ones. Now i think these are the culprit. Apparently, while in file transfer mode, these cables were unable to provide sufficient current, causing the phone to drain the battery completely. Once i wanted to charge it, it couldn't boot to charger mode due to the battery being completely empty.
Hooking up with the original htc cable again, it still showed the red flashing light. Exact same behavior. Until i (for the heck of it) tried to bash the power button quickly. It suddenly came back to life again and started charging again through pc.
If you find yourself in the same situation with bad usb leads (something to do with resistance of the cable?) or a red blinking light, try tapping the power button quickly instead of trying to boot into recovery mode. It might save you a postal return and a week or 3. or your ass, if you rooted it before it stopped charging.
Click to expand...
Click to collapse
thank you! Thank you! That cheap usb was totally the problem!
Small update.
This problem just happened to me. 1 cord gave me flashing red while plugged into the wall and pc. I switched to my other cable and its charging and functioning normally. Cord was the problem.
I had a similar issue with my one x.
It discharged completely, then when I went to charge it I just got the red blinking light for ages. I left it charging overnight thinking the battery was so low it needed a while to charge enough to be able to switch on.
But in the morning it was still flashing and the phone was very hot, so I thought the battery was blown.
So I came on here and saw a suggestion about holding the power button and the volume down button. It went to the boot menu and said there was not enough power for a factory reset or something, so I selected recovery. I then got a warning icon and the phone switched off again, but this time with a solid red light. A
After a while I was able to turn it back on again.
Hope this helps.
Wellllll
I have the HTC One VX. I know this isn't in the same topic, but since I found the thing that helped/worked here, I thought I should share my experience. So I bought my new phone on Sunday, so it is roughly 5 days old...not even a full week. I charged the phone before I went to bed to roughly 80%. I made sure all apps and what not were turned off and pressed the lock button. I woke up in the morning and checked my phone to see what time it was. Had 78% battery left. I left it on my dresser for roughly 2 hours and when I got back from class, I grabbed my phone to check if I had any messages.
The phone didn't turn on and I didn't even get the flashing orange/red light. So I tried charging it and nothing. I changed wires and nothing. I frantically searched the internet and stumbled upon this forum/thread. I tapped the power button at least 15 times consecutively and the phone barely flashed orange. I tried to plug it in again and rapidly pressed the power button 10 more times and the screen finally turned on. It started charging and I checked the battery life. Somehow, in 2 hours my phone drained itself of 78% battery life when it was on the lock screen (its also set to lock after 15 seconds of inactivity) to the point where it couldn't even turn on.
The phone/battery was not even warm/hot or w/e. It had not touched any water. No idea what caused the immense power drain, but glad it is working. Thank you so much for this help
woops, wrong thread
It happens to me allso in this morning, in my opinion is like this: The phone is turning off when basicly you have a little bit batt (lets say something around 5% max) and its turning off to protect data and is showing to you batt empty. Then it cames a user with a charger connected to a power supply (house charger,car charger or directly to pc's usb). You must use a good usb to micro-usb charger (the original ones are't good usb cables) try to use a Nokia usb to micro-usb cable, This was the first problem most usualy. The second one is to pay a HUGE attention to UC, don't uc'it so much because then the charger board will not charge your batt so well. Keep yours HOX safe and anjoy it. Have a nice day boys and girls.
I have a rooted HTC evo 4g. I rooted it about 2 months ago and have had no problems.
I woke up this morning, and it is bricked. I have not recently flashed anything or done anything beyond regular phone use.
i cannot enter download mode, and the "charging" led does not come on.
Any suggestions?
What does your phone do when you press the power button?
Have you removed the battery and inspected for indications of damage such as discoloration or bulges?
Have you tried connecting a different USB cable that is known to be working?
Have you visually inspected the USB connector for loose/damaged conductors?
BobWalker said:
What does your phone do when you press the power button?
Have you removed the battery and inspected for indications of damage such as discoloration or bulges?
Have you tried connecting a different USB cable that is known to be working?
Have you visually inspected the USB connector for loose/damaged conductors?
Click to expand...
Click to collapse
the power button does nothing.
The usb cable and wall adapter works on my kindle, and i tried an additional one with no results.
The battery appears normal, however my next planned step is to try and get a replacement battery and see if that works.
Try taking battery out and then plug usb cable in only and try to turn on...
angryITman said:
Try taking battery out and then plug usb cable in only and try to turn on...
Click to expand...
Click to collapse
no dice.
also wondering about the cause... 2 potential things:
- I've noticed that the phone gets very hot. 40+ degrees even when not running much. Is this within normal tolerance or could i be looking at heat damage.
- I've been getting the pop-up asking me to do some sort of OTA update. I keep saying no, because i know these ota updates can be incompatible with rooted phones. Could it have pushed through somehow and if it did could it cause the problem i am experiencing?
phone is fixed.
A read on the sprint forum that sometimes holding down the power for an extended time can get the phone to be responsive... had to hold it for like 90 seconds. It then flashed the white evo boot screen and powered back down almost immediately.
After this, however, the orange charging light came on and i was able to get to boot loader. I let the phone charge for a while, then it boot up as normal.
One of the things i noticed is that the battery is practically completely drained... this is odd as it was plugged into the charger when it died. On the same sprint forum, others have speculated that sometimes the battery can drain to the point where it wont accept a charge anymore... so maybe thats the issue.
Hello all,
I'm at my wits end to put it lightly... I have the P-605, I was trying to flash ng1 official firmware through Odin v3.09, which the file in question, I have used a few times before so it isn't a bad download.
It got about half way through and died. The tablet still boots to the 'firmware upgrade has encountered an issue screen', I can still enter download mode. One major issue I can't charge it and i have no recovery [emoji22] its now dead flat.
Even with my 2.1Amp tablet charger it boots for a few seconds and dies. I've tried multiple cables and USB wall chargers as I thought that may be the issue all to no avail! I am completely lost. Any help would be muchly appreciated
What was the firmware before you flahed the stock ng1? cm11?
Have you try to flash recovery with Odin, don't let it boot up and see if you can boot into recovery.
Did you try to flash with low battery juice??
The prior firmware version is unknown :-/ but it was X KAT v3. I did try to flash recovery but it resets before it gets it done, if I hold the PWR, VOL+, HOME the screen seems to light up stay black a little longer than if it was going to the firmware issues screen then go to 'firmware upgrade has encountered issues' screen. It seems the longer I keep it off charge the longer it takes for it to reset next time its plugged in, so I will leave it for a hour and try to flash recovery. I didn't know what the battery was at 'probably very low' as I haven't used it in yonks and it was already in a bootloop from flashing X Kat v4.0 incorectly otherwise I would have charged it
I'm thinking about taking the battery out and manually charging it with a old USB cable. From pictures on the internet the battery has 2 red 'positive' 2 black 'negative' and 2 green. I'm unsure of what the green cables are. Is there anyone that can shed some light on this?
blakie21737 said:
I'm thinking about taking the battery out and manually charging it with a old USB cable. From pictures on the internet the battery has 2 red 'positive' 2 black 'negative' and 2 green. I'm unsure of what the green cables are. Is there anyone that can shed some light on this?
Click to expand...
Click to collapse
Hi,
have a look here for the USB pinout !
The original cable uses only four of the micro usb pins. The second ground pin is missing. This can be used to put the device into certain modes. I used different cables, all with five pins, no problems, but it does not mean, that the fifth pin was wired in these cables. Batteries have an internal security circuit which cuts power vis a polyfuse, if the voltage drops too low. The fuse should be re-armed when connecting the device to the charger, although the device may not recognize its own battery. Let it charge for a while, that the fuse doesn't blow again when disconnecting. Plug in again to charge fully. Some devices have a design fault which makes them unable to recover with a discharged battery. Charging Voltage is not 5, but 3.7v! The additional cables at the bsttery are either for a dumb temp probe, or a bus to communicate with the security circuit. The latter maybe impossible to charge externally. Otherwise you probably need some professional charging station, which can handle all sorts of Nimh and LiOn batteries AND have to make an adapter for the custom battery plug. Too much hassle, right?
blakie21737 said:
I'm thinking about taking the battery out and manually charging it with a old USB cable. From pictures on the internet the battery has 2 red 'positive' 2 black 'negative' and 2 green. I'm unsure of what the green cables are. Is there anyone that can shed some light on this?
Click to expand...
Click to collapse
Get one of this usb filter charging adaptor and use your pc to charge it. This also allow you to charge your tablet using any power source like PC, car charger etc... you will not see the X mark when using your pc to charge.
http://www.amazon.com/gp/product/B007IXBTCK/ref=oh_details_o02_s00_i00
This adaptor adds Apple signaling for charging currents above 0,5A. If the current charger won't support Apple stuff.
And yes, I suspect that the Note expects the Apple signal for 2A iPad charging.
I don't know whether there are any supported charge modes in between, like 900mA, but it charges from a standard 500mA usb port, but only in soft-off and idle deep sleep, and ultimatively slow.
But then, since the KK update, some people's Notes charge only during active state.
HELP
blakie21737 said:
Hello all,
I'm at my wits end to put it lightly... I have the P-605, I was trying to flash ng1 official firmware through Odin v3.09, which the file in question, I have used a few times before so it isn't a bad download.
It got about half way through and died. The tablet still boots to the 'firmware upgrade has encountered an issue screen', I can still enter download mode. One major issue I can't charge it and i have no recovery [emoji22] its now dead flat.
Even with my 2.1Amp tablet charger it boots for a few seconds and dies. I've tried multiple cables and USB wall chargers as I thought that may be the issue all to no avail! I am completely lost. Any help would be muchly appreciated
Click to expand...
Click to collapse
I have the same issue.........!!!
I'm lost at this point and dont know what to do.
Any attempts at flashing appear to be useless as there is now zero battery and it wont charge.
It boots straight to 'Firmware encountered a problem screen'. I can get it to the download screen.
It also made it 47% of the way through a recovery via kies, but i think the battery issue caused the failure.
If the cable is pulled out while in the firmware encountered a problem screen it instantly dies and wont start. It wont start unless the plug is in........
Anyone??? Please???
With zero battery, you can't perform any maintenance requiring a usb connection.
Without OS and/or custom recovery, i don't know any advice.
ADB and probably Fastboot operations can be performed via wifi, while the thing is at the charger, but in brick state this won't help.
lecorbusier said:
With zero battery, you can't perform any maintenance requiring a usb connection.
Without OS and/or custom recovery, i don't know any advice.
ADB and probably Fastboot operations can be performed via wifi, while the thing is at the charger, but in brick state this won't help.
Click to expand...
Click to collapse
Thank You
Advice to is find a way to Charge the battery then attempt other methods.
I think Kies may work if I have Charge
Cheers
Tim
Maybe the Note froze and drained the battery till it's safety circuit kicked in.
Then you should leave the Note charging for a while(hopefully), to reset the circuit's fuse and get enough juice to not trigger it again immediately. Normally, after unplugging and replugging, the battery should get recognized again and charge normally till full. Monitoring charge in Off-State requires(only) a working kernel, i think.
It also could be a defunct usb jack or just the connection with the main pcb is loose, which is typical for the Note, like loose display and backlight cables.
lecorbusier said:
Maybe the Note froze and drained the battery till it's safety circuit kicked in.
Then you should leave the Note charging for a while(hopefully), to reset the circuit's fuse and get enough juice to not trigger it again immediately. Normally, after unplugging and replugging, the battery should get recognized again and charge normally till full. Monitoring charge in Off-State requires(only) a working kernel, i think.
It also could be a defunct usb jack or just the connection with the main pcb is loose, which is typical for the Note, like loose display and backlight cables.
Click to expand...
Click to collapse
Thanks Lecorbruiser.
I have had the unit aprt a few times to verify battery connections and all ribbon connections on the boards are ok.
Im note sure of the safety circuitry uou mention though.
I have also power the device up with out the battery plugged in at all. So i know the supply is there. Maybe i have run the battery too low to recover?
Sent from my SM-G900I using Tapatalk
The safety circuit is in the battery or attached to it. Once its fuse has been triggered(normally at 2,5v), the battery shows zero voltage & open circuit. Current from a charger should reset the fuse and the battery will charge unless it had been discharged below 1,5v.
Normally devices with 3,7v batteries are shut down by the system at 3,5-3,0 volts, mostly 3,5 like the Note.
Well the device started to flicker and couldn't keep the screen back light on when it go low.... I'd say I have trashed the battery then if it got below 1.5?!
I have left it on charge for over 10 hours a couple of times and achieved nothing
Android shuts down at 3,5v, in case of a freeze(which could go unnoticed if it happens in standby) the circuit at 2,5v. Then it's a matter of self discharge, till the battery reaches the critical point of 1,5v.
The flickering backlight denotes one of the other cables running across the battery, like that for usb.
I think the connections loose by holding the note in your hands, pressing on the backside. A case with a stiff back will stabilize the Note, like mine. Otherwise all pressure goes thru the flimsy back and is applied on the battery, the metallic shields or some spacers. And the cables get bent very slightly during pressure. Should be harmless, but seemingly isn't.
I have done some testing... here it goes:
Battery Voltage disconnected 2.69V
Battery Connected and USB connected 2.8V
Battery not connected or ( after accidently) shorted 1.5V
From my reading android min voltage is about 3v?
Normal voltage from 3.7v to 3.2V and Charging voltage at a max of 4.4V
I also see some talk of 2.7V figure as a minimum cutoff point, this maybe why it will not give 4.4V to charge as below 2.7v maybe considered a write off?
Thanks for your info lecorbusier
With some custom roms, but none i know for the Note, you can modify the shutdown voltage, to squeeze out a couple of minutes battery life, though the voltage goes down rapidly after having reached 3,5v.
lecorbusier said:
With some custom roms, but none i know for the Note, you can modify the shutdown voltage, to squeeze out a couple of minutes battery life, though the voltage goes down rapidly after having reached 3,5v.
Click to expand...
Click to collapse
Thanks for all your help.
I purchased a new battery and did a normal kies recovery and it's back from the dead... Thanks again
Sent from my Pixel XL using Tapatalk
Hi. I have note 2 n7100 with stock 4.4.2 United Kingdom BTU rom.
Before a year I was make a root with 'kingo root' app and all was ok
Today. After the device came slow and out of space (apps. Files..) I decided to clean him fast. After short backup for files contacts and what need. I turned off the device. And from boot made a wipe data.
After wipe the device work good. And kingo root too. All looks fine. Have root.
After some hours kingo root sent notifications about problem. I try to check it. And the app running the install root screen. After finish. The device turned off and the light flash in blue and white.
In this step. Maybe I was need wait.. But after some minutes I tried to reboot with long press on power button. The light turned off. And the device doesn't respond any more..
Have something to try or it's dead?
*checked another battery
**not responding for charging
Connect the phone to a windows pc and look for any new or unknown devices in device manager. Let us know if anything is detected.
Hi. The pc doesn't detect anything.
Running windows 10. Maybe need driver's?
In general, you need Samsung drivers. Install those and check back with Audit13.
Damn, just noticed you said "checked another battery". If that is true, then forget all the stuff I say bellow, which is to make sure that the battery is not the issue here.
Could be a bootloop cycle that finishes the battery before it has a chance to charge. Remove the battery, hold power for 10 secs, replace battery and try to charge it. If this doesn't work then try to isolate if the problem lies in the battery itself. Check it with a multimeter, if volts are low there's your problem. Either the battery is fully discharged, or faulty. Amps are a bit tricky but can be checked with a multimeter if you have the phone request power and measure it at this moment (the multimeter must be set for Amps and the red cable probe must be put in the 10A port). If volts are ok but Amps are low then battery is discharged or faulty.
So empty battery and won't charge. Try a different charger if you have one and/or a different USB cable. Try a computer USB 3 port and cable as it gives more Amps.
Try to charge the battery alone with an external battery charger, those usually show the charge % as well.
If you don't have any of these, strip an old USB cable. Put the red (+) cable in the positive lead of the battery, and the black (-) in the negative lead, and have it sit there for 2 or 3 minutes. This is dangerous for the battery, so touch it at all times to check its temperature (If it heats up suddenly remove the cables, battery is probably faulty). The battery should be charged a bit now, if that doesn't turn on the phone then at least you know for sure that the problem is not the battery.
I lnstalled Samsung drivers. Doesn't matter.. No any response
Thanks. But no. It's doesn't the battery. The volt good (4.04v). And checked with more battery fully charged..
You may have a defective USB port. Try forcing the phone into download mode with a USB jig.
I don't think that is USB because the device was in charge before and never was problem with it.
About this jig. I found info here on xda about how to build one. But where I need find this resistors?
You can just buy a USB jig from ebay: http://www.ebay.ca/itm/Fix-Micro-US...931845?hash=item463b6120c5:g:fHkAAOSwFnFV8QBM
Yes. But the time.. Shipping can take months.. So I prefer to built one. I know to do that. But need the part
OK. Update..
After check on some local labs. Found one with USB jig. Connect. But still nothing. No response.
Some labs say that the flash memory dead. (fix is about 75$. Good?). And some say that have option to use device that connecting to motherboard and can flash to to memory in force. But not sure that it's work.
So now the device in lab. Wait for answer.
Update (last I think)
The motherboard doesn't respond for anything..
Need to replace the flash memory. Or motherboard.