Develop Bugs

[S-OFF][Flash recovery] Easy to flash recovery on computer

First of all , plz forgive my bad English ,I've tried my best~!
Thanks for emveefr and his quote :http://forum.xda-developers.com/showthread.php?t=1301388
If you can understand Chinese ,here is my post firstly on a Chinese forum ：http://bbs.hiapk.com/thread-2629638-1-1.html
This quote will let you flash your recovery easily through a computer,what you need to do is just a few steps below:
Above all ,make sure your wildfire s is S-OFF.
1. Download HTC Sync USB drivers through internet ,you can find it in the website of HTC.
2. Download "flash_recovery.zip" in the end of this quote, and extract it to you desktop (anywhere is OK),
3. make sure you user data space have more than 10 Mb available (to make sure,you may need uninstall some applications in you phone).
4. connect you phone to the computer with USB data cable,and chose HTC Sync mode.
In the end ,you just need to click "RunMe" in the folder that you extracted, then wait some times ,the application will work itself ,when you see "press any key to continue" ,all be done~!
After these steps, your phone will reboot into recovery mode ,which is showing the vision 5.0.2.6 and with a blue menu.
By the way, you can use your own recovery.img to instead of the recovery.img in the folder,but you must name it as "recovery.img" .
You should have succeed !

No replies ,,,,,

Or you could download clockworkmod, put on sd card and it installs itself.

Yeah just downloading and placing the clockwork recovery zip on the root of the SD card is a much faster process.
sent using tapatalk

Yeah,it a normal way to flash recovery,but in China, someone locked hboot to forbidden others flash it ,and planted some applications in the phone that not welcome by users. So, I found this method to solve this problem .

I see, so this is a good bit of knowledge to have in case someone does the same later.
sent using tapatalk

ren cai a ! haha....jushuo zhege banfa zhende neng gaoding cid 11111111
---------- Post added at 05:37 AM ---------- Previous post was at 05:22 AM ----------
mofei LZ shi 风行

zhuru123 said:
ren cai a ! haha....jushuo zhege banfa zhende neng gaoding cid 11111111
---------- Post added at 05:37 AM ---------- Previous post was at 05:22 AM ----------
mofei LZ shi 风行
Click to expand...
Click to collapse
Any CID is available. You should read the quote on bbs.hiapk.com

neng shuo putong hua bu ? ni shuo de sha yisi ?
---------- Post added at 08:06 AM ---------- Previous post was at 07:53 AM ----------
哎。。。据说现在有son的病毒机了。。楼主又要加油了。、。。。

zhuru123 said:
neng shuo putong hua bu ? ni shuo de sha yisi ?
---------- Post added at 08:06 AM ---------- Previous post was at 07:53 AM ----------
哎。。。据说现在有son的病毒机了。。楼主又要加油了。、。。。
Click to expand...
Click to collapse
Chines is not allowed here .... I know someone locked hboot on s-on devices ,if you want to know more information that be wrote by Chinese about this, bbs.hiapk.com may fit you more ......

ruguo ni zai WUHAN wo keyi gao dao zhezhong shouji ,keyi jie ni yanjiu....ENGLISH wo zhi neng yuedu ,bu neng biaoda chulai ...ni you QQ mei ...wo dandu gei ni shuo ~~

dead links.. trying to find working set of files to port android

hi all!
i am working for a few days on my kaiser to get a working android on the thing...
i would like to use the nand-option
the problem is that there is not a complete set of files to use..
i cant find a androidinstall.tar + matching kaisimg.nbh on the web..
i dont care what version it is.. just anything... donut eclair froyo..
when ik found some matching files, the links were dead...
i updated the hardspl and radio... unlocked the thing...
so the phone is ready for it!
everything i am trying does not work.. trying for two days now.. i need my life back! ;-)
some combo's are bootloading.. installing with errors (bad sectors), but a working set is not to be found... sometimes theres not enough diskspace..
changing the nbh with atools doesn't do the job... install script doesnt.. nothing does...
does anyone have a working set of files for me? (root of sd and andboot)
i need a kaiser panel1 240-320 .nbh file. but that is easy to change with atools..
hope someone can help with a link or attachment...
kind regards, joep

You mean CyanogenMod 6&7 cannot be download?
---------- Post added at 09:56 PM ---------- Previous post was at 08:58 PM ----------
Yea I receive an not downloading try again but it seems that it is downloading and opening(try both) without any problem.Please try again.Thank You.

Search Google for "androidonhtc"... there should be files listed on SourceForge.
"Bad blocks" can stop installation if there are enough of them, find out how many and report back. It sounds to me like you have some NAND marked as bad. It can be fixed through MTTY, but I don't suggest just anyone try it.
There are a multitude of android installers for the Kaiser, but the only one I can suggest is the "system_froyo" on SourceForge. Actually, if you type "system froyo eu" into google, without the quotes of course, it should be the first thing on the list.

Hello developer,I want to delite my imei

Deleted posted

Why would you do that, in the first place?

Stuff like that really dont go on here one its not justt in a folder its in a hidden partition and 9 outa 10 times only reason someone wants to do somethin like this is cause there iemi is blacklisted which we do not support
---------- Post added at 10:04 AM ---------- Previous post was at 09:56 AM ----------
Basicly what u r asking is iemi tampering which is illeagle in most countries

[Stock FW] Cube WP10 T698 Stock Firmware + GUIDE

如果你是中国的用户，请直接看这个帖子了解详情：http://bbs.wfun.com/thread-992275-1-1.html
Please ignore the quote here if you're not from China.
Click to expand...
Click to collapse
Have you bought the Phablet Cube WP10 T698 and soft bricked it? If the answer is yes, you're lucky.
I just got the stock firmware from a Chinese forum (In fact, it's from the quote above).
I don't know if it works on T598, but just give it a try.
How to use it:
1. Download the firmware I provided.
2. Extract the archive and install the driver. You may need to enter disable driver signature enforcement mode before install the driver if you're running 64-bit Windows. Please Google for it if you don't know how to enter.
3. Power off the phablet and enter the Recovery mode (A lightning with a cog in white) by press the combination key [Vol +] + [Power]. If you encounter boot loop, keep press the combination key until you see the lightning with a cog.
4. Open a command prompt with Administrator privileges and change the working directory to the place that you extracted the firmware. If you're using PowerShell, type "cmd" and execute before proceed. For example, if you extracted the firmware to "D:\CUBE_T698_Stock_FW\Firmware" , type the command below to change working directory.
Code:
cd /d "D:\CUBE_T698_Stock_FW\Firmware"
5. Connect your phablet to PC. After the phablet is recognized and the driver is installed, type the command below to check if your phablet is listed.
Code:
ffutool -list
6. If everything is ready, type the command below to flash the firmware.
Code:
ffutool.exe -flash flash.ffu
Following steps are really tricky, please read carefully.
7. After the firmware flashed, your phablet should reboot, and the phablet should enter the factory menu. Unplug your phablet, and tap "关机" (Power Off in Chinese), "确认" (OK in Chinese) to power off your tablet.
In case that you can't recognize Chinese character, I attached screenshots below.
8. After your phablet is completely powered off, re-enter the Recovery mode that display the lightning and cog.
9. Type the command below to disable factory menu.
Code:
ffutool -setBootMode 0
10. After your phablet reboots, you can finally use your phablet and pick a language.
11. You may need to use Interop Tools by @gus33000 to modify the model in order to get further updates. I recommend you to change the model to Lumia 650 since the specifications are similar.
According the experience the OP writed in the post I quoted, I attached the recommended version (1.5) below.
Code:
PhoneManufacturer=MicrosoftMDG
PhoneMobileOperatorName=000-CN
PhoneManufacturerModelName=RM-1154_15729
PhoneModelName=RM-1154
PhoneHardwareVariant=RM-1154
If the phablet doesn't contain the language you're speaking, please reply, I'll post another guide for installing extra languages to your phablet.
You may need the checksum of Stock Firmware:
Code:
File: CUBE_T698_Stock_FW.zip
Size: 1291801211 Bytes
MD5: 8817E33DEBD002900B745974B921FB61
SHA1: 8D327D9B2400BB1636584055DE1CF8D4BDD4F26C
CRC32: A6495317

have FFU? just use WPID

This golden information, and if you speak Chinese we need your help...
Hi there!
This is very very valuable information. Its good to know how to refresh the CUBE tablet! Now that we know for certain that the Cube can be flashed to the original firmware, what we need to know now if how to fix all the other outstanding problems, namely:
Problem 1: Display position on the screen
Problem 2: Netflix doesn't work on this device.
I need you to speak Chinese and visit the Chinese language wfun forum and ask Chinese developers how to fix the screen positioning and how to unblock Netflix and get Netflix to work on this device.
If you can help me, you are help the entire community of users who own the CUBE WP10 device.
Please help us solve the screen position problem and the Netflix problem.
(Also check all my other threads and post on the CUBE WP10 - It will help you know how much I know)
---------- Post added at 12:24 PM ---------- Previous post was at 12:08 PM ----------
From the bbs.wfun forum:
我实际使用中，有个值得注意的bug，表现为识别的触摸点比实际的触摸点要往屏幕下边偏移约2mm，而且主要表现在顶部位置，越往屏幕下方尝试，越不明显。
具体可以下载一个绘图APP测试。说这个bug完全不影响使用那是假的，只不过没有到难以接受的地步而已，平时不常点击顶部位置不会有所察觉（我也是点击智机社区APP顶部的签到和登录按钮之后才发现的）。这个bug还是希望厂家尽快放出解决方案，至少要在新售的机型里面解决，我自己也会尝试找找看能否用户自行修复。
---------- Post added at 12:28 PM ---------- Previous post was at 12:24 PM ----------
屏幕偏移感觉无法接受
---------- Post added at 12:30 PM ---------- Previous post was at 12:28 PM ----------
敢问屏幕偏移是怎么解决的？
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
敢问屏幕偏移是怎么解决的？
---------- Post added at 01:11 PM ---------- Previous post was at 12:35 PM ----------
可惜屏幕有问题，我早就买了，屏幕一直有偏移=_=

klorofill said:
Hi there!
This is very very valuable information. Its good to know how to refresh the CUBE tablet! Now that we know for certain that the Cube can be flashed to the original firmware, what we need to know now if how to fix all the other outstanding problems, namely:
Problem 1: Display position on the screen
Problem 2: Netflix doesn't work on this device.
I need you to speak Chinese and visit the Chinese language wfun forum and ask Chinese developers how to fix the screen positioning and how to unblock Netflix and get Netflix to work on this device.
If you can help me, you are help the entire community of users who own the CUBE WP10 device.
Please help us solve the screen position problem and the Netflix problem.
(Also check all my other threads and post on the CUBE WP10 - It will help you know how much I know)
---------- Post added at 12:24 PM ---------- Previous post was at 12:08 PM ----------
From the bbs.wfun forum:
我实际使用中，有个值得注意的bug，表现为识别的触摸点比实际的触摸点要往屏幕下边偏移约2mm，而且主要表现在顶部位置，越往屏幕下方尝试，越不明显。
具体可以下载一个绘图APP测试。说这个bug完全不影响使用那是假的，只不过没有到难以接受的地步而已，平时不常点击顶部位置不会有所察觉（我也是点击智机社区APP顶部的签到和登录按钮之后才发现的）。这个bug还是希望厂家尽快放出解决方案，至少要在新售的机型里面解决，我自己也会尝试找找看能否用户自行修复。
---------- Post added at 12:28 PM ---------- Previous post was at 12:24 PM ----------
屏幕偏移感觉无法接受
---------- Post added at 12:30 PM ---------- Previous post was at 12:28 PM ----------
敢问屏幕偏移是怎么解决的？
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
敢问屏幕偏移是怎么解决的？
---------- Post added at 01:11 PM ---------- Previous post was at 12:35 PM ----------
可惜屏幕有问题，我早就买了，屏幕一直有偏移=_=
Click to expand...
Click to collapse
Yeah, I'm a Chinese and I'm glad to help you.

How do we fixe the display offset?
hikari_calyx said:
Yeah, I'm a Chinese and I'm glad to help you.
Click to expand...
Click to collapse
YESSSS!!! Okay is there anywhere on the internet where we can find a solution to the display positioning/offset problem.
可惜屏幕有问题，我早就买了，屏幕一直有偏移=_=
敢问屏幕偏移是怎么解决的？
Unfortunately, the screen has a problem, I have bought this long ago, the screen has been offset = _ = Dare I ask how to solve the screen offset?
I really really really want to fix the display position/Screen offset issue... I have be searching everywhere I can for answers for a 3 weeks now...

lehetne a telefon nyelvét magyarrá tenni????

phone menü hungaryan????

Has anyone figured out the Netflix issue? It seems to be with all paid content because Hulu is not working as well.

[SOLVED] Firmware accidentally deleted

Previous message :
Hello,
Like i said in the title i got a problem when i flashed a new rom and now my k5 (version A6020a40) show lenovo and nothing. He apparead on windows as QUALCOMM HS-USB QDLoader 9008 (COM 3).
I tried to flash a new rom with QFIL and a rom by shreps but when i start the download he said previous firmware : (nothing) , new firmware : WS and failed to download.
Tried with
rom A6020a40_S029_160705_16G_ROW_qpst
rom A6020a40_S027_160519_16G_ROW_QPST
So if someone know or have an idea i take it
And sorry by advance i'm French so i lack of vocabulary
Thanks in advance
If any person have this problem try to do the rescue option of Lenovo Moto Smart Assisant.
It worked for me and i now have my system back with the stock firmware.
But you will have the stock rom so if you wan't to save your data i can't help you

no i have solve. ı can help. you dont know.
---------- Post added at 11:54 AM ---------- Previous post was at 11:53 AM ----------
i need 10 post.
---------- Post added at 11:55 AM ---------- Previous post was at 11:54 AM ----------
6 post left