I recently had a problem with the battery of my Defy, shows that this charged and stops charging even at 95%. I tried calibrating the battery, with the app and the same from the recovery, and removing the battery.
I can't think what else to do. Help Please!!
Edit, i'm on CM7.1
Have you tried wiping battery stats from recovery??
Bleak3993 said:
I recently had a problem with the battery of my Defy, shows that this charged and stops charging even at 95%. I tried calibrating the battery, with the app and the same from the recovery, and removing the battery.
I can't think what else to do. Help Please!!
Edit, i'm on CM7.1
Click to expand...
Click to collapse
have been facing the same problem right since the day i upgraded to CM7..but what i have observed is that even though it says that the battery is fully charged @ 95%, it still keeps on charging...check after half and hour and it goes upto 100%..yes, but when u start using the handset after charging, this 5% comes down very fast!
Im having the same problem with the first 10% of the battery disappeared really quickly? Im on standard rom 2.2.2.
Sent from my MB525 using XDA App
Just my observation... In Defy though the hardware is capable of 1% reporting of battery state the software is configured to assume near values. For Example 25% to 34% is considered 30% and 35% to 44% is considered as 40%. Hence when the battery reaches 95% it assumed 100% and reported as fully charged. But if you don't unplug the phone the charging will continue to 100%. In my Defy I don't see any significant difference in drain other than the first 1%. To know the exact charge I use ledefy with LED indication. Ledefy can be configured to change the colour of LED at exact 100%.
yeah, but now it goes up to 100%, i think its solved, but if this persist i'll report the issue to cyanogenmod forums...
thanks for the info pprakash
One thing I found that showed an accurate battery % is Android Circle Battery Widget.
This showed my battery % to 1% accuracy (1% 2% 3% rather than 90, 80, 70, 60 etc)
Market link: https://market.android.com/details?id=fr.depoortere.android.CircleBatteryWidget&hl=en
pk92 said:
One thing I found that showed an accurate battery % is Android Circle Battery Widget.
This showed my battery % to 1% accuracy (1% 2% 3% rather than 90, 80, 70, 60 etc)
Market link: https://market.android.com/details?id=fr.depoortere.android.CircleBatteryWidget&hl=en
Click to expand...
Click to collapse
LEDEFY also have similar notification. It can display the same in the notificatin bar saving space on the screen or if you are having customer rom you can use a different framework-res.apk which can display 1% values ( This is my case for exact values ).
Try clean the battery stat created by older ROM, and use Battery Calibration free app which you can find easily on the market to calibrate ur battery... i think that would help
Related
Hi fellas..
Maybe you've noticed the messages I've sent to Unofficial BravoS thread of Coolexe's (http://forum.xda-developers.com/showthread.php?t=1200517&page=51) which is the ROM I use.
The issue is, the battery discharges rapidly. Actually, if you check mV values, it doesn't discharge rapidly, but if you look at percentages, there is a huge inconsistency. I used Battery Monitor Widget to log the battery performances last night, and saw these horrible results:
Code:
2011/09/19|04:59:49|-515mA|37%|3581mV|40.2ºC|1|0
2011/09/19|05:00:51|-465mA|36%|3576mV|40.2ºC|1|0
2011/09/19|05:01:49|-460mA|36%|3576mV|40.2ºC|1|0
2011/09/19|05:02:50|-462mA|35%|3517mV|40.2ºC|1|0
2011/09/19|05:03:49|-477mA|35%|3517mV|40.2ºC|1|0
2011/09/19|05:04:50|-471mA|34%|3449mV|40.3ºC|1|0
2011/09/19|05:06:06|-478mA|0%|3415mV|40.5ºC|1|0
2011/09/19|05:06:08|-478mA|0%|3415mV|40.5ºC|1|0
These are the last lines of the log, before the phone shuts down. As you can see, the phone gone to 0% from 34% in one minute! No low battery warnings or whatsoever..
Funny thing is, this doesn't happen in StarBurst ROM (which is a Froyo based one). Do you reckon this is a GingerBread issue or something? I saw some other people complaining about their phone shutting down at 20% as well.
So, what do you suggest?
when you look at the voltage there isnt that much drain, so its only a displaying problem
wipe battery stats and maybe recalibrate the battery
but first one should fix it
cheers
ps: i just checked, my desire is at 18% with 3.693mV, now you see the differance
crendot said:
when you look at the voltage there isnt that much drain, so its only a displaying problem
wipe battery stats and maybe recalibrate the battery
but first one should fix it
cheers
ps: i just checked, my desire is at 18% with 3.693mV, now you see the differance
Click to expand...
Click to collapse
This is what I've done so far:
Drained battery to 0% (log above) and charged it a little bit while powered off (like 20%). Turned on the phone, and obtained those logs (last lines only):
Code:
2011/09/19|14:41:25|-268mA|10%|3644mV|38.1ºC|1|0
2011/09/19|14:42:25|-267mA|10%|3644mV|38.1ºC|1|0
2011/09/19|14:43:25|-270mA|10%|3644mV|38.1ºC|1|0
2011/09/19|14:44:25|-269mA|9%|3644mV|38.1ºC|1|0
2011/09/19|14:45:25|-267mA|9%|3644mV|38.1ºC|1|0
2011/09/19|14:46:25|-268mA|9%|3644mV|38.1ºC|1|0
2011/09/19|14:47:25|-266mA|8%|3644mV|38.1ºC|1|0
2011/09/19|14:48:25|-267mA|8%|3644mV|38.1ºC|1|0
2011/09/19|14:49:25|-269mA|7%|3640mV|38.0ºC|1|0
2011/09/19|14:50:25|-267mA|7%|3640mV|38.0ºC|1|0
2011/09/19|14:51:25|-266mA|7%|3640mV|38.0ºC|1|0
2011/09/19|14:52:25|-267mA|7%|3640mV|38.0ºC|1|0
2011/09/19|14:53:25|-267mA|6%|3640mV|38.0ºC|1|0
2011/09/19|14:54:25|-267mA|6%|3640mV|38.0ºC|1|0
2011/09/19|14:55:25|-267mA|5%|3635mV|38.0ºC|1|0
2011/09/19|14:56:25|-266mA|5%|3635mV|38.0ºC|1|0
2011/09/19|14:57:25|-267mA|5%|3635mV|38.0ºC|1|0
2011/09/19|14:58:25|-268mA|5%|3635mV|38.0ºC|1|0
2011/09/19|14:59:25|-268mA|4%|3630mV|38.0ºC|1|0
2011/09/19|15:00:25|-319mA|4%|3630mV|38.0ºC|1|0
2011/09/19|15:01:25|-268mA|4%|3630mV|38.0ºC|1|0
2011/09/19|15:02:25|-270mA|3%|3610mV|38.1ºC|1|0
2011/09/19|15:03:25|-269mA|3%|3610mV|38.1ºC|1|0
2011/09/19|15:04:25|-270mA|2%|3586mV|38.1ºC|1|0
2011/09/19|15:05:25|-273mA|2%|3586mV|38.1ºC|1|0
2011/09/19|15:06:25|-273mA|2%|3586mV|38.1ºC|1|0
2011/09/19|15:07:25|-273mA|2%|3586mV|38.1ºC|1|0
2011/09/19|15:08:25|-289mA|1%|3513mV|38.3ºC|1|0
2011/09/19|15:09:25|-290mA|1%|3513mV|38.3ºC|1|0
2011/09/19|15:09:51|-290mA|0%|3464mV|38.3ºC|1|0
It seems more "smooth" discharge now. Right now, I'm charging my phone off; going to turn on phone once it reaches "green light" with charger on, and plug it off once phone booted. Maybe then, it can know what's maximum and minimum.
So far, I tried to charge my phone to full and erase batterystats.bin but, as you can see at the first post, it didn't work well.. On the other hand, the phone charged-discharged only once in this ROM, you think it could be better if I've given a "second chance"?
i dont know much about that "battery calibrating" and reseting stuff, you have to search in the forum
only thing i want to say is, dont do that deep drains!
recharge at least 5%! you kill your battery, lithium-ion batterys get serious damage from deep drains
crendot said:
i dont know much about that "battery calibrating" and reseting stuff, you have to search in the forum
only thing i want to say is, dont do that deep drains!
recharge at least 5%! you kill your battery, lithium-ion batterys get serious damage from deep drains
Click to expand...
Click to collapse
I know, but when phone thinks it's 30% and not warn me, how can I do it?
In order to calibrate the battery meter - FYI the battery itself cannot be calibrated, as Li-Ion batteries have a very low memory compared to old Ni-Cd etc. batteries - you have to go through the following procedure:
1) charge the battery to 100%;
2) let the battery discharge until the phone shuts itself down;
3) plug the wall charger into the phone, boot the phone up then charge the battery to 100% without interruptions.
If the above procedure does not yield the expected results, you can try fully charging the phone (LED showing green) with it completely turned off (after completely draining it). Again, the charging procedure should not be interrupted.
Source: personal experience - had to do this twice after installing new ROMs, as the phone was shutting down at ~14% (working like a charm now).
Regarding the matter of battery wear because of complete discharges, Li-Ion batteries do indeed have a lower cycle count than old-school batteries, but the standard charge/discharge number a Li-Ion battery can take is ~350, so you can't damage the battery pack by doing a full cycle per month (required to keep the battery meter accurate).
Good luck!
TVTV said:
In order to calibrate the battery meter - FYI the battery itself cannot be calibrated, as Li-Ion batteries have a very low memory compared to old Ni-Cd etc. batteries - you have to go through the following procedure:
1) charge the battery to 100%;
2) let the battery discharge until the phone shuts itself down;
3) plug the wall charger into the phone, boot the phone up then charge the battery to 100% without interruptions.
If the above procedure does not yield the expected results, you can try fully charging the phone (LED showing green) with it completely turned off (after completely draining it). Again, the charging procedure should not be interrupted.
Source: personal experience - had to do this twice after installing new ROMs, as the phone was shutting down at ~14% (working like a charm now).
Regarding the matter of battery wear because of complete discharges, Li-Ion batteries do indeed have a lower cycle count than old-school batteries, but the standard charge/discharge number a Li-Ion battery can take is ~350, so you can't damage the battery pack by doing a full cycle per month (required to keep the battery meter accurate).
Good luck!
Click to expand...
Click to collapse
Thanks for your answer...
Today I realized that it my concern was a quick one. Today, I discharged battery to 0 percent, plugged the AC charger while it's OFF and charged it for around 2h22m until Led-green-full; then turned on the phone with charger plugged and plugged it off just after the boot process. After that, I let the phone to discharge (I helped it a little )
I actually saw "Plug your charger" warning this time, and according to Bat. Mon. Widget, it gone down until 13%! If I do compare the mV values with the old ones, I can see that somehow the phone does learn which mV value correspond to which percentage better.
Even though it gone from 13% to 0% in two minutes, it's at least better than 30% to 0%.. Also, when I check the readings after I plugged in, I saw that percentage-voltage matching is slightly higher, showing that the phone now shows lower percentage for the same voltage - which shows that it learns percentage better.
After one or two charge-discharge cycle, I think it'll learn absolute 0
BTW; the battery says 3.4V 1400mAh and my maximum voltage is 4160mV (100%) and minimum is 3415mV (0%). Are these values normal, you think?
PS: What I'd recommend from anyone who loves flashing ROMs as much as I do is: AFTER YOU FLASHED A NEW ROM, CHARGE YOUR BATTERY TO FULL (100%) AND ERASE THE BATTERY STATS. AFTER THIS, NEVER, I SAY, NEVER ERASE YOUR BATTERY STATS FOR LONG TIME IN ORDER FOR YOUR PHONE TO LEARN STATS BETTER! Erase after long time, say 3 months for wear effects to be accounted, but well, I think you should be fine even after you don't do this
Maybe you did already know that, but, well, I learned it hard way
EDIT: Phone shutdown at 13% after this, but I think it'll do better in time..
Can't Calibrate the Widget
I am having a similar issue with my htc aria. Problem is that it gets to about 78% and then won't go any higher. It even shows (in Battery Monitor Widget)
"Discharging" and "AC plugged". I have let it sit plenty long enough to be fully charged and then completely discharged it (until it shut itself down, which was not 0%) and recharged until it reaches 78% again and stops charging. I'm guessing it is so far out of whack that it says I'm at 78% but I am really at 100%.
The widget says to charge to 100% and then drain completely to 0% to calibrate. I can't do either from what I can tell. So what to do?
theGanymedes said:
Today, I discharged battery to 0 percent, plugged the AC charger while it's OFF and charged it for around 2h22m until Led-green-full; then turned on the phone with charger plugged and plugged it off just after the boot process.
Click to expand...
Click to collapse
Quick tip - let the phone charge for another hour or so after the light goes green (when charging it while powered off). I've read that the light goes green at about 95%. It takes another hour for the phone to really charge to 100%. That's because Li-Ion batteries use two stages to charge: a fast one and a slow one. More details here.
Glad i could help.
P.S. - It also took me two complete charge/discharge cycles to fully calibrate my battery meter after switching from FroYo to Gingerbread.
@vkyjackie - Try fully charging the phone while powered off. If it still doesn't fully charge (LED green), then you might have an issue with either the battery pack or the wall charger.
i ask this because my battery stats have gone dumb dumb on me. first i had a 40% instant drop when rebooting and since 62% charge on my phone Battery Life how been showing 4150mV. it may fructuate 50mV (i think it keeps topping battery off and then when it goes down a tad i tops off again ).
So my question is then is my battery already fully charged and my battery % is off and if so why would it keep slowly going up when the mV's are no longer going up?
fyi i trust this battery widget. used it in 3 phones for 2 1/2 years. hasent update recently either
View attachment 752219
View attachment 752220
View attachment 752221
When your battery is fully charged it is generally around 4200mV. It seems like your battery is not calibrated. I recommend the battery calibration app. Search it in the market. Very easy to calibrate. Just charge till its at 100% and close to 4200mV and then hit calibrate.
Also, to monitor your battery stats (voltage, %, mW usage) I recommend the battery monitor widget. It shows graphs of your mV as well as your battery percentage over time.
Thanks bro, I apreciate the indepth answer. I thought it was 4200 but I gotta be sure u know
Hi, sry for my english=(
When i charge my battery its normally charge to 80% and then becomes 100%.
Try calibrate battery but this doesnt help. Also try another roms and kernels.
Is it a battery issue?
U can buy new battery from DEALEXTREME.com
so its the only way?
Try this.
Charge battery to full. Leave plugged in, Turn off fastboot in power settings and shut phone off. Light will turn orange again and let it charge til green. Boot into recovery and wipe battery stats. After this let the battery drain as low as 10% before recharging to full without unplugging. Do this a few times over a few days. If you don't get more accurate percentages after this then the battery could be messed up.
Gizmoe said:
Try this.
Charge battery to full. Leave plugged in, Turn off fastboot in power settings and shut phone off. Light will turn orange again and let it charge til green. Boot into recovery and wipe battery stats. After this let the battery drain as low as 10% before recharging to full without unplugging. Do this a few times over a few days. If you don't get more accurate percentages after this then the battery could be messed up.
Click to expand...
Click to collapse
thx i will try.
i have the exact same issue. i have done battery stat wipe..flashed multiple roms over and over with full wipe and all that. battery charges up to 80% then the LED turns green..and stays that way till it reaches 100%. it jumps from 80% to 100% in just a few minutes.
battery jump
I wouldn't worry Lendlord mine does the same (see attached pic) you can see the green line jumps up from 80 to 100 but doesn't jump down from 100 to 80 under use. The picture is taken from Battery monitor widget, it's a great app which shows mv, ma, % and temp and even keeps a text log of what ma drain there has been allowing you to monitor battery drain while you're using your phone or while it is sleeping.
Here's a great guide aswell of how to ensure best battery life by memnoc:
forum.xda-developers.com/showthread.php?t=1226016
so thats mean that some battaries have the same issue=( And there is no solution for it...
HTC failed again...
first GPS and now the battery. Bad, very bad!
And one more request.
Can someone post your current widget log?
LendLord said:
so thats mean that some battaries have the same issue=( And there is no solution for it...
HTC failed again...
first GPS and now the battery. Bad, very bad!
And one more request.
Can someone post your current widget log?
Click to expand...
Click to collapse
I have the same thing happen to mine, i think its because you've let your DHD die due to low battery levels and that damages the battery which i think causes this problem
..letting the phone shut off because of a completely discharged battery is NOT good for the lifetime of Li-ION batteries.
The battery could be hurt and the amount of mAh the battery is able to store might be lower after.
Also trying to 'pump' the battery to fully charge by connecting / disconnecting while the phone is down is not a good advice because li-ion batteries also don't like overcharging.
To be sure that the battery is fully charged due to its ability it is sufficient to let the phone be conectet to charger or usb overnight.
Android uses the voltage of the battery to estimate (!) the % charge value.
Android supposes the battery is fully charged when it enters the voltage of about 4.2 Volt which is the charging cut-off voltage for li-ion cells.
Now when charging again the conceded voltage is reached more quickly than estimated by android, so the system is 'surprised' of this rapid charge and changes the % value to 100% because the conceded voltage is reached more quicklyy as supposed.
(Try to fill a 0.5ltr beer bottle into a 0.33 glass)
This is the normal of aging for li-ion batteries.
Consider for yourself if it's acceptable for you or if you should by a new battery.
by the way... be careful with cheap china batteries for 10$.
Offers with exaggerated values (up to 1600mAh) will mostly keep their promises
only for the first two or three charges only and will than fall back to 800 mAh or even less !
Greetz
Pudel
Yeah...
My battery started to do the same thing for a week or two. It will charge to 86% then it jumps to 100%, saying it's charged.
This is normal afaik, nothing to worry about.
Sent from my Desire HD using xda premium
solve
actually，it's the problem of your rom , in the framwork.apk . unzip it you will get a lot of battery icon form 1%to 100% in the res file ，if it made mistake，that 'your problem. you can go to uot kitchen to coustom it again.
Nope!
I've solved my problem. I've bought a new (original) htc battery, and the new one works great. I haven't reflashed the rom, or made any new modification. Just added the new battery.
So, yes, it's a faulty battery.
LendLord said:
Hi, sry for my english=(
When i charge my battery its normally charge to 80% and then becomes 100%.
Try calibrate battery but this doesnt help. Also try another roms and kernels.
Is it a battery issue?
Click to expand...
Click to collapse
Download Current widget from market and charge ur phone then wait for the 0 ma then download the battery calibration app from market too and calibrate and unplug ur phone, u can aslo reboot to recovery and wipe battery stats hope it helped you
I bought a new battery today, a Chinese knock-off battery which claims to have a capacity over 2000. I live in Mongolia, so that's basically my only option if I want a replacement battery, since there's basically no postal system here.
When I first put in the battery, it showed a 59% charge. After a few minutes and maybe a reboot, it showed a 20% charge. It consistently drained down to zero, and I'm charging it now.
I've experienced really strange battery drain with the former battery (also a Chinese knock-off) where it loses maybe 10 percent an hour on idle, so I figured the battery needs to be replaced. Is there anything I can do to calibrate it? I have a feeling that the charge is actually more than is being shown, but no way to confirm my suspicions. Am I right just to try to charge it to 100% and discharge it to 0% until the battery life gets better, or is there something else to do? I should mention I've tried resetting the battery stats in CWM with no real effect.
Thanks from Mongolia.
Go into recovery when battery is at 100% and go to advanced then clear battery stats or download battery config for rooted devices and clear battery stats that way.
Nelinski said:
Go into recovery when battery is at 100% and go to advanced then clear battery stats or download battery config for rooted devices and clear battery stats that way.
Click to expand...
Click to collapse
Clearing battery stats achieves nothing other than deleting the stats on the what has been using battery power. Battery calibration isn't required on our phones.
duraaraa said:
I bought a new battery today, a Chinese knock-off battery which claims to have a capacity over 2000. I live in Mongolia, so that's basically my only option if I want a replacement battery, since there's basically no postal system here.
When I first put in the battery, it showed a 59% charge. After a few minutes and maybe a reboot, it showed a 20% charge. It consistently drained down to zero, and I'm charging it now.
I've experienced really strange battery drain with the former battery (also a Chinese knock-off) where it loses maybe 10 percent an hour on idle, so I figured the battery needs to be replaced. Is there anything I can do to calibrate it? I have a feeling that the charge is actually more than is being shown, but no way to confirm my suspicions. Am I right just to try to charge it to 100% and discharge it to 0% until the battery life gets better, or is there something else to do? I should mention I've tried resetting the battery stats in CWM with no real effect.
Thanks from Mongolia.
Click to expand...
Click to collapse
if you want to increase battery life for your new battery, charge it fully to 100% whenever you charge it will increase charge storing capacity of the battery
duraaraa said:
I bought a new battery today, a Chinese knock-off battery which claims to have a capacity over 2000. I live in Mongolia, so that's basically my only option if I want a replacement battery, since there's basically no postal system here.
When I first put in the battery, it showed a 59% charge. After a few minutes and maybe a reboot, it showed a 20% charge. It consistently drained down to zero, and I'm charging it now.
I've experienced really strange battery drain with the former battery (also a Chinese knock-off) where it loses maybe 10 percent an hour on idle, so I figured the battery needs to be replaced. Is there anything I can do to calibrate it? I have a feeling that the charge is actually more than is being shown, but no way to confirm my suspicions. Am I right just to try to charge it to 100% and discharge it to 0% until the battery life gets better, or is there something else to do? I should mention I've tried resetting the battery stats in CWM with no real effect.
Thanks from Mongolia.
Click to expand...
Click to collapse
See this post:
http://forum.xda-developers.com/showthread.php?t=1312273
Never, ever I repeat never let your battery drop below around 5%, and always charge it before it reaches zero. I use the Guage Battery widget v3 pro as it is very accurate, but you can also get the free version. You can & should use the free battery calibration tool from the Google play store, simply install it & charge the battery to 100% then run the calibration App. simples
Sent from my GT-I9100 using Tapatalk
Hi, my xperia ion has an annoying battery problem- its battery status is either 100% or 1% only (literally; no 90% or 50% battery status). I have no idea whether how much battery i have because after charging, its 100% but after using it couple times, or just leaving for a while, it suddenly becomes 1%. There were also times that after I charged it (battery full) and turned it off, its battery becomes 1%. I hope someone can help me with this problem. Thanks XDA
Do battery calibration,
Download app called "battery calibration" and open the app it will ask u to charge to 100%, do that and then press Calibrate button.
It will wipe your battery stats and correct battery percentage.
After do that, drain your battery to 0% then charge it to fully 100%, drain it again. Charge again to 100%, drain it again. Charge again to 100% and your battery is calibrated.
Sent from my LT26w using xda premium