Related
So... I've purchased a Vodafone v1640 from eBay a while back.. and I'm sick of the silver housing! I'd rather have a white or black housing, so I plan on opening the sucker up to paint it! I'm pretty sure I have no warrenty anyway, as I purchased from eBay and am not on a Vodafone plan (Cingular here in the USA)...
My question is... what's the best type of paint to do this with? Any special sort of paint?
Or, I guess, if there's anywhere I could buy different housings for it, pre-painted.. that'd work too.
Any input at ALL would be greatly appreciated! ;D
I want some infos too on this case for a new housing because black housing for Universal looks the best.
From my experience of disassembling the HTC Charmer, I think the HTC stuff are kinda tightly fitted, it might not be that easy to have it painted. I mean, I'm not sure how good you are at painting, but for the paint job I did (on other stuff, toys, cars, shelves, not the phone, yet), I usually end up with a thick (relatively) layer of paint on it, which I think may cause problem when you try to assemble the phone up again.
So, my advise, make sure you can really do a skin tight paint job before you try it on the phone, as it seems that it is really difficult to get a spare casing for HTC stuff.
BTW, you may want to look at some of the web site for PC modding, where they tend to mod their keyboard and mouse, giving them new paint job, probably such forums will have experts on the paint that you should be using.
you might have to experiment a bit if you haven't painted before...
The most impoportant thing is to find a dry place with no humidity.
You can get the retouching spray for cars called deco paint. It will work well.
p.s. IMO black housing will look good if you have a black keyboard.
Hmm black keyboard...
very good point.
i once painted my dreamcast controller black 8)
just used a normal spray can for it (didn´t have an airbrush at that time yet)
works very easy:
- open it up and remove all things you dont want to spray
- clean everything very good (with terpentine/gasoline/ammonia for example)
- let it dry
- spray it (very thin, because you don´t want to make drops of paint on it) from about 15-20cm away (any closer and it will be more difficult to avoid paintdrops and keeping the paint thin
- let it dry in a clean enviroment
after a few months of usage the paint will shine on spots where you hold it much...
so you might want to spray some colourless shine stuff (sorry: don´t know the name for it in english, it is ´lak´ in dutch) on it after the paint is drie to have the color remain the same way
or you could just touch it everywhere so the shine is everywhere :wink:
heh, it's close in english, it's pronounced 'lak-ker', spelt lacquer
Anyone have any luck with this repainting the case idea? Any pictures?
i did my old mpx 220 before black cases were out, i used a special, plastics spraypaint from krylon. flat black ,and clear topcoat. i dont have the pictures anymore but it was nice. just take your time read up on painting . thin light coats and follow the directions on the can.
Here you go guys! ^_^
http://www.stealthguards.com/index.php/
UPDATE WITH INSTRUCTIONS! Posted by akastixx (Thanks dude! )
What you will need:
**A razor or an exacto knife (or a thin sewing needle or safety pin if you're a Nancy)
**Clean hands (wash that damn cheeto grease off your hands, tard!)
**Clean Evo (easy way to clean it is one tiny windex/all purpose cleaner shot to the middle of the screen. Don't even spray, just make it dribble 4-5 drops. try it on your counter before you try it on your PRECIOUS, precious.)
**A plate, saucer, or the top to a plastic container.
**No alcohol or perception altering substance in you (this is not rocket science, but you have to stay sharp to successfully complete this mission!)
**A small amount of dish soap, hand soap or detergent.
**A cup of water.
**Time. You will not get great results if you do everything at once. You can probably get away with doing this in three parts, but I'd recommend four. You'll see why later. You should also do this when you feel you won't need to make or take a call or use your phone. This will take a couple of hours.
**Optional - a cutting board and florescent lighting (it's harder to see the shapes in "yellow" light)
Part 1 (The back):
** We will start with the back. The good thing about the back cover is that there is less unnecessary protector to fight with. Clean your hands and your Evo.
**pour about as much as water you could imagine the cupped palm of your hand could hold 3-4 times on your saucer.
**Squirt about 6 drops of dish liquid into the water stir it with your finger, then dry your finger.
**Place the Evo face down on a flat surface.
**Take the back protector. Place that on a flat surface. Pick one of the three holes at the top (speaker, camera or flash) and hold it down with the tip of your blade near the top of that hole. you don't need to cut anything. with your other hand peel the protector from the top slowly.
**There will be some resistance, and it will feel like you might tear your protector but if you pull slowly, the circle should stay there.
**Put the protector back and repeat with the other circles.
**You should now have your protector halfway peeled, and the 3 circles attached to the paper, or at least not attached to the protector.
**There are two ovals on the bottom half. You will need to place your blade between the oval for the kickstand, and the protector. Your blade needs to be in that outer oval that surrounds the kickstand.
**Peel the remaining half of the protector off. Be careful not to damage the material for the kick stand.
**You should now have the back protector (minus the kickstand) off. If you got a fingerprint or two on it, it's ok, but try not to touch anything besides the corner.
**While holding a corner of the protector (with the hand you don't write with) dip it in your soap water mix sticky side down. Hold up the protector. There should be some excess water at the bottom. The corner where your fingers are should be dry, so hold the protector with your writing hand, use the excess water to wet the dry spot, and slide the protector on the plate to remove any other excess. there should just be a film of water, not any water about to drip off.
**Note --- if you have to stop at any point with protector that's already peeled, place it halfway on/halfway off your plate so you don't lose it.
**Place your protector on the back part of the Evo. For best results, you should touch the the Evo with opposite bottom corner of the protector and slowly place the rest on. (if you're holding the protector in your right hand on the right corner of the protector, lay it on the Evo bottom left first.) You will have a couple of minutes to adjust it, so take your time. If you did this correctly, you should have no air bubbles, but if you do, gently smooth them out.
**Once the back is secure, you can start on the kickstand.
**The kickstand may be a little harder to remove. if there is a spot where you can gently slip your blade in to start peeling it off the paper, go for it. Hold the blade down on the part you don't need like you did before to pull the kickstand off. If not, you will need that cutting board or something underneath the paper that you don't mind having a razor cut on.
**Using the blade, touch one of the straight edges of the oval. Turn your blade so that if you were to make a cut, it would start at that edge, but end AWAY from the oval, not into it. Make your cut. You only need a tiny cut, just enough to slide your blade underneath so you can peel like I described one step ago. If you are using a needle, poke a hole on the outside of the edge as close as you can.
**Once the kickstand is peeled, wet it and place it. it is not a perfect fit. Place it an equal distance from all sides or however you'd like, and you are good to go.
**Now you will need to leave your phone alone for at least an hour. DO NOT TOUCH YOUR PHONE FOR AN HOUR, NIMROD. Don't go celebrating with a drink, either.
Part 2 (Front):
Ok, on to the front.
**Using your blade (or your needle), touch one of the long edges of the front protector and poke or cut like I described before. Make sure you are slow and careful. You do not want to cut into your side protector pieces.
**Wiggle your blade in and pry the front up like before.
**Dip and place your protector like before (slowly, opposite end first).
**This time, you will need to wait at least an hour and a half to two hours. The material on the front is different, and it takes longer to stick.
Part 3-4 (Sides):
Last up is the sides, the hardest part. If you notice the picture above, it has all the side pieces except for one. if you look at your actual paper, the missing piece is above the rest of them. you will put this piece on last.
First I will tell you where the pieces go, then I'll let you know how to put them on.
*Top piece - It will start from the edge of the power button, and slightly wrap around the the left side of the phone (if the screen is facing you).
*Top left side piece - it will continue where the top piece left off, covering most of the left side of the phone.
*Bottom left side piece - as the name suggests, it will continue from the last piece and stop at the USB icon.
*Right piece - the skinny part will start at the HDMI logo, and come up most of the right side of the phone, stopping short of the volume button.
*Mystery piece - it goes on the right top corner between the volume and power button.
Part 3 (Left Side):
**Remove, dip and place the top piece. You will place it on the phone in the same direction you peeled it off the phone, or the same way it shows in the picture above. My method of getting these suckers on right was this. Whether you are right handed or left handed, place the piece on the top. It doesn't need to wrap around yet, just make sure it's on there. Grab the bottom half phone with your right hand with the screen facing your palm. Look at the piece you put on. Gently adjust it with your left thumb. Once it is in place, you'll need to put the phone down, screen side up, but the top of the phone facing you. Cover the phone with your left hand and firmly place your thumb on the top piece, but be careful not to move it. Use your right thumb to smooth it around the corner.
**Note - if any of your pieces dry out, just put more soapy water on it. Just don't let it dry out too many times.
**Now you will notice the piece doesn't want to go on straight, and a air bubble will form at the corner. To fix that, first take your left thumb off the phone and make sure the top part is still in place. If it is not, adjust it. Place your thumb there again and gently smooth the bubble at the corner out first with your right thumb. It may try to come back, but smooth it out gently, the same way you gently wiped away the tear of a pansy iphone user when they saw your phone. Once the bubble is out, gently adjust the rest of the piece into place. If the bubble comes back, repeat the process - rub the bubble out, and adjust the rest. If you accidentally mess up the top, you are a failure at life. Start again.
**You may not get this on right before it starts drying out. if you don't, just re-wet the piece and start over.
**Once your top piece is on, remove, dip and place the left piece. This is easy. Just make sure it starts right where the last piece left off with no space in between. Be careful not to mess up the top.
**Sit the phone down for 20-30 minutes and let it dry.
Part 4 (The rest):
**Place the bottom left side piece on like you placed the top piece - hold it down with your left, rub the bubble out with your right, adjust the rest.
**You will place the right side piece the opposite way. Place the fat part of it right by the volume button, and once you have it on, secure it with your right thumb and smooth the bubble with your left, then adjust the rest. Be careful not to mess up your other pieces in the process.
**At this point, you should probably dry your phone out again, but if you're brave, slap on that final mystery piece. It doesn't matter what had you use to hold or smooth at this point, just get that piece on!
boo 2.85 shipping
Servers are el' crasho.
i jumped all over this, and went back for my wifes moment. Servers are crashing, but after a few page reloads, I was able to get it done.
Illinois = $2.85 shipping also. Guess that's how they are making their money....shouldn't cost more than a 1st class stamp...just like eBay...they profit from shipping...make you think your getting a deal. Not that this is a bad price for a full set but maybe 2 sets id order...
I don't know if the servers crashed but when you go to enter the expiration date of your credit card, the year field is so smushed that it cannot be displayed on the screen. My debit card wouldn't verify, so I used my credit card.
VERY slow server.
Nice find, I just ordered one.
sweet, i think imna order another after the free offer is over just to support them.
Just bought a carbon fiber phantom skinz 2 days ago and saw this and bought it. I'm good on covers for now hahaha. GOOD FIND!
+1 Great find man.
Even though I just ordered one, how good are the cases lol? Anybody have any prior experience with them?
@sprink- Dude, their not making *any* money from this or shipping (ok, they will have positive income considering it doesn't cost 2.85 to send one but it's not a significant amount). Their going to make money by the increased publicity this will give them; people will remember their the one's that gave away free covers. And after that, people will just return to them or refer other's to them when they need more covers.
edtate said:
+1 Great find man.
Even though I just ordered one, how good are the cases lol? Anybody have any prior experience with them?
Click to expand...
Click to collapse
pretty sure they are relatively new, they still offering free protectors for the palm pre or htc hero. its $3, cant really go wrong with that price, but the normal $15 is still a bargin compared to $30 for invisoshield or $20 for ghost armor.
edtate said:
Their going to make money by the increased publicity this will give them
Click to expand...
Click to collapse
i just hope their bandwidth improves.. the website won't load
+1
Thanx just ordered 2, paid $4.88 for shipping only.
Well worth the price.
@shift_ Refresh CONSTANTLY
Alright, here's a review I found originally posted by bjbarr on sprintusers.com since I couldn't find any anywhere:
Here is my review:
the front and back skin fit pretty good. the cutout around the kickstand at the bottom is a tad too big but doesn't show to a point that it will be a problem.
the one thing I haven't figured out is the cutouts for the sides. They just don't seem right to me as the one I think is for the volume buttons doesn't really cover the whole side, in other words there is no cutout for the volume buttons. And I haven't figured out the one for the bottom around the mic.
I guess I just won't put anything there and same goes for the sides. I jsut may go ahead and order from BSE and give them a try as I have always been pleased with their skins but like yellotootr said that they probably all come from the same manufacturer and I am leaning toward that same thought, especially the cheaper ones anyway.
Which ever sensor that is to the right of the phone has no cutout but to the left of the earpeice has a cutout and for what??? Makes no sense but I am beginning to think that these skins are for another phone but can be used for the Evo but I haven't been looking to see what other phone they may fit.
They were easy to install though, but I don't think I got all the air bubbles out of the back skin but sometimes they just disappear over night. Guess I will find out tomorrow but I probably won't replace it just for that. It does disturb me that the corners and sides aren't protected because it seems those are the places that get scuffed the most.
Click to expand...
Click to collapse
Ordered
10char
In on this one. I have that too good to be true feeling. We'll see.
edtate said:
+1 Great find man.
Even though I just ordered one, how good are the cases lol? Anybody have any prior experience with them?
@sprink- Dude, their not making *any* money from this or shipping (ok, they will have positive income considering it doesn't cost 2.85 to send one but it's not a significant amount). Their going to make money by the increased publicity this will give them; people will remember their the one's that gave away free covers. And after that, people will just return to them or refer other's to them when they need more covers.
Click to expand...
Click to collapse
you are right.... I just hate inflated shipping prices. Just wish these companies would charge actual shipping costs that's all. And yes word of mouth goes a long way.. also though sometimes companies get defective stuff in bulk at little or no cost to them and can't really sell them so they give them away and make money on the inflated shipping that won't be refunded.
ordered also! great find!
thanks for the link; order 4 total (2 evos and 2 blackberries); they also have lifetime warranty so that's a plus
ty. got 2 evo guards and 2 ipod guards for ~10 shipped.
The outer frame of my phone (the metallic plastic border-frame-thing) has a scratches and gauge on it now because I dropped it few weeks ago. I know it's just the appearance but at times I just find myself staring at it with discontent.
Here is the Link to the photo of it. (remove the spaces I'm a new user)
http : / / yfrog . com / n415092010127j
So I ask what would you do if you vibrant has that gauge/scratch?
Do you think it's fixable? maybe just sand it down to smooth it out or would it be make it worse?
Is it possible to get a replacement part?? I cannot find anything online but... I did see the non-working "T-MOBILE DUMMY SAMSUNG VIBRANT T959 DISPLAY PHONE" model on ebay.. do you think I can take the part from there? (haha, I think I do sound somewhat desperate)
oh and is there a case that just covers the perimeter of the phone leaving the back and front exposed? (I have a case for my phone already it but it makes the phone look pretty bulky)
Thank you everybody
I'd like to know this as well as I dropped mine on Friday and scratched all four corners! I thought about sanding it to give it a brushed look, but since it's plastic, I have a feeling it would look like crap.
Can you replace just that part?
Just put it in a case that covers the chrome bezel.
I had a similar issue when I had my blackberry 8900. The "chrome" around the sides started coming off, so I picked at it with my nail until it all came off. It was smooth black plastic underneath, and I'm willing to bet that's the case with the Vibrant.
You could tape off the parts you don't want scratched (screen, buttons, etc.) and use sandpaper on the chrome.
YES U CAN
GO TO
Global direct part.com and find ur phone
sad2903 said:
YES U CAN
GO TO
Global direct part.com and find ur phone
Click to expand...
Click to collapse
www.globaldirectparts.com
you mean that?
http://www.globaldirectparts.com/Samsung-T959-Front-Housing-p/smsng6085940.htm Right here bro
Just use a good quality liquid Wax polish used on automobiles.
I had a very similar issue as yours. I tried everything and finally came up with a solution. And it was the liquid Wax polish used on cars and bikes to make them shine. Just mask all the sensitive parts of the area of your phone in which you have scratches, then take the polish and rub it on the damaged area with optimum pressure with a clean cotton cloth (make sure a little heat is generated due to friction) . You might have to do it several time so, protect any other unwanted part.
Hope this helps ?
If I told you guys I was making white housing for our Cappy's, would you guys be interested in buying it?
It's not available anywhere, but I made one for myself and it looks great!
I was thinking of charging $40.....trying to get some idea of how many people would be interested.
Let me know!
Sent from my Cappy using Tapatalk
Just remember, if and/or when you start to sell these, you need to do it in the Marketplace, not here.
Just my own opinion here, but I'm not loving it. The fact that the sides are white, but the backplate is still black doesn't look good. The front would look better if the top and bottom were also white. It would make the whole thing look complete.
I like the concept but I think it needs to go further.
FWIW, I've always been a jet black gadget lover. I think it looks sleek and refined. White just always made me think back to the old white/beige PCs of yesterday.
i would absolutely buy one, ive been scouring the internet for them for months now
Top and bottom of the front white would look better. White lettering on the back too maybe?
ill buy for $40 maybe a bit more, it just past my bday so i gots money to spend.
Pm me if you want.....
40 seems a little expensive for my liking. And it looks like to me that all you were doing was just adding a vinyl skin ontop of the phone.
Although if you were to make one for the whole phone I think 20-30 would be more than enough of a fair price for one.
actually no, i bought official Samsung replacement housing from Japan, then put 6 coats of white plastic paint, followed by 3 coats of clear. took about a week altogether.
Sent from my Android 4.0 ICS'd Cappy
I agree that i think it needs to be more white, great idea though.
WHITE? ewwww.... just my 2cents.. now a matte black finish ill bite
Sent from my SAMSUNG-SGH-I897 using XDA App
maybe if it were actually white plastic and not just white paint, also the display would have to be white also cause it just looks ugly as of now
i love the white, but like the others on here i think the whole thing should be white. and if its a white paint and not plastic isn't there going to be a chipping issue overtime?
Green?
I dont mean to hijack this thread, but I was very interested in getting a different color housing for my captivate after viewing this. After searching for a few hours for colored housings online I just decided to try what you did with the white and buy my own paint and try it out! I went with an Android Green just to match my theme on my phone (I am due for an upgrade soon anyways). I will try to update with a picture of the finished productas soon as I am done!
Partridge86 said:
I dont mean to hijack this thread, but I was very interested in getting a different color housing for my captivate after viewing this. After searching for a few hours for colored housings online I just decided to try what you did with the white and buy my own paint and try it out! I went with an Android Green just to match my theme on my phone (I am due for an upgrade soon anyways). I will try to update with a picture of the finished productas soon as I am done!
Click to expand...
Click to collapse
Wait...did you spray over the camera hole?
nygfan760 said:
Wait...did you spray over the camera hole?
Click to expand...
Click to collapse
well.. I was smart enough to put some clear tape over the outside of the camera lens, however when i flipped it over to get the edges I was not paying close enough attention and sprayed the inside. I was able to get the paint off pretty easily though.
I did an idiot move when putting my phone back together. I was using the phone with just the sd card to take pictures and left the card in the phone when trying to fit the housing back on.. needless to say I snapped the sd card in half and it no longer works :/
Edit: I'm not sure if I'm gonna say that I am done or if I should add another coat. However I am pretty happy with the color I just need to clean it up a bit! Let me know what you all think!
Partridge86 said:
well.. I was smart enough to put some clear tape over the outside of the camera lens, however when i flipped it over to get the edges I was not paying close enough attention and sprayed the inside. I was able to get the paint off pretty easily though.
I did an idiot move when putting my phone back together. I was using the phone with just the sd card to take pictures and left the card in the phone when trying to fit the housing back on.. needless to say I snapped the sd card in half and it no longer works :/
Edit: I'm not sure if I'm gonna say that I am done or if I should add another coat. However I am pretty happy with the color I just need to clean it up a bit! Let me know what you all think!
Click to expand...
Click to collapse
I think it'd be cool if you put a coat on everything that isn't the screen. To me it looks incomplete with the bottom of the phone(both front and rear) still black. Two coats probably isn't a bad idea! Maybe some gloss clear coat over the top to make it shiny? I like the android green choice though.
wwcjr91 said:
I think it'd be cool if you put a coat on everything that isn't the screen. To me it looks incomplete with the bottom of the phone(both front and rear) still black. Two coats probably isn't a bad idea! Maybe some gloss clear coat over the top to make it shiny? I like the android green choice though.
Click to expand...
Click to collapse
well this is actually with about 3 coats and 1 "gloss" coat. I'm not sure if I used the right paint. I used the "plastic paint" which probably takes a bit longer to dry. When putting it back together I kept pulling the paint from the tail part so I decided just to completely take the paint off of that part. Also I was thinking about painting the top and bottom of the front, however I did not want to risk covering the microphone hole and the inputs at the top. I think if I hadnt rushed through it so much then I could have had a better finished product.. good thing is these housings are around 8$ on ebay so I can just buy another one and give that one a proper try!
Partridge86 said:
well.. I was smart enough to put some clear tape over the outside of the camera lens, however when i flipped it over to get the edges I was not paying close enough attention and sprayed the inside. I was able to get the paint off pretty easily though.
I did an idiot move when putting my phone back together. I was using the phone with just the sd card to take pictures and left the card in the phone when trying to fit the housing back on.. needless to say I snapped the sd card in half and it no longer works :/
Edit: I'm not sure if I'm gonna say that I am done or if I should add another coat. However I am pretty happy with the color I just need to clean it up a bit! Let me know what you all think!
Click to expand...
Click to collapse
Prep work is 90% of painting. The actual painting part is very quick. You should have sanded better. It looks like the paint will dry and begin flaking off if it has not already.
Well one of my friends suggested I should "wet sand" it. I've personally never heard of that but he said it will make it look a ton better, so I guess I'll try that this afternoon.
Wet sanding= sanding with water to remove particles from the sandpaper.
Start with 200 grit to really clear off the paint. Then move to 400 grit. Then move to 800. Then clean with alcohol VERY WELL.
you want it to be flat and sanded down to 800 grit across the whole piece. Don't stop with 400 grit until all the green is gone. Use 800 to polish it. The rubbing alcohol is used to clean off any particles which may stick. Douse it in alcohol.
There are better ways.. but if you're going to do all of that, may as well use a nice metal flake paint and a clear coat from your auto parts store to get it really nice. If you do the clear coat, don't stick it in your pocket for a few days.
Also, time yourself on that 1 minute shake thing... trust me. Shaking is important. Longer is better. It helps the paint to dry properly and faster.
So, For the first time in my phone career, I have dropped and cracked a phone. I decided to go the route of trying to replace only the glass. There are multiple videos out there, but very few are specific enough for my liking. Let me start by showing what I ordered. It will be here Tue,
So here is the replacement part i ordered.... http://www.amazon.com/gp/product/B00A66UH8I/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
And to avoid having to use and cut double sided tape, I went with this...but I'm not convinced that it is what i need. I could use some opinions on this. http://www.amazon.com/gp/product/B00BMD8HMM/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Its very limited on description, but i think it is basically precut double sided tape for my project.
So, I am going to remove the rear housing but leave the motherboard in place for this excursion. Using a heat gun and the tool provided with the part, I plan to remove the glass from the digitizer.
My screen is completely shattered, so I feel like that may help me a little bit. I can use tweezers to remove the larger bits instead of having to worry about removing the whole screen and putting too much pressure on the screen.
What do you guys think?
I think you have a good chance of success. ...if...
The temperature of the gun is correct.
I've changed 2 screens, and I will not do it again.
The trick is heat and being patient in the repair.
You'll get it. ..just don't rush it. ...g
Edit:
Use a vacuum cleaner with a small piece of tubing taped into the hose end to provide suction in getting any glass pieces you can't see while the repair is under way. ...g
Dredge said:
So, For the first time in my phone career, I have dropped and cracked a phone. I decided to go the route of trying to replace only the glass. There are multiple videos out there, but very few are specific enough for my liking. Let me start by showing what I ordered. It will be here Tue,
So here is the replacement part i ordered.... http://www.amazon.com/gp/product/B00A66UH8I/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
And to avoid having to use and cut double sided tape, I went with this...but I'm not convinced that it is what i need. I could use some opinions on this. http://www.amazon.com/gp/product/B00BMD8HMM/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Its very limited on description, but i think it is basically precut double sided tape for my project.
So, I am going to remove the rear housing but leave the motherboard in place for this excursion. Using a heat gun and the tool provided with the part, I plan to remove the glass from the digitizer.
My screen is completely shattered, so I feel like that may help me a little bit. I can use tweezers to remove the larger bits instead of having to worry about removing the whole screen and putting too much pressure on the screen.
What do you guys think?
Click to expand...
Click to collapse
I do this for a living. Be incredibly careful when you do it. I recommend that you pickup a non-contact IR temperature probe, the reason you'll want this is so you don't overheat the LCD and yellow it. Keep the temperature of the glass below 200°F at all times, any higher and you start to run the risk of yellowing the LCD. The adhesive that will remain behind is relatively easy to clean off, just be patient with it and take your time, you can get a clean repair by doing it slowly. As for the adhesive, it's not very easy to not have bubbles, but think of it like installing a screen protector and you should be fine.
One great tool to have for this (and other hot air work) is a thermal camera. If you can get your hands on one great. Be sure to set the pallete to custom and pick colors that will get your attention when they get too high. Set the thing up on a small tripod or something so you can see your work in it and easily monitor the image. I have one where I work but would think of renting one if I did not have access to one and planned such a temperature sensitive job.