Hi community - I updated to VP3G and now either the red button nor the end button finishes the call - this is bad - any idea what I can do ?
peter7 said:
Hi community - I updated to VP3G and now either the red button nor the end button finishes the call - this is bad - any idea what I can do ?
Click to expand...
Click to collapse
Tough to answer with any certainty without knowing more details. Could be your radio - I had that same problem with some radios. Since going with this ROM I have not had the problem. Also what apps do you have loaded?
Mark.
peter, it is something you have done as no one else has had this issue.
What radio? What software have you installed? Using a different Dialer? Hard reset?
We need more information besides "it doesn't work".
And as long as we're giving advice, this forum prefers possible concerns or issues be posted in the already available thread.
For example; if you're having problems with Black Majik, no need to start another thread, just post in the already available thread.
Thanks
Berd
Yes first I thought it is the radio so I switched to Radio 1.43 but the problem is still there. Now I found out it is more the case when I`m connected via GPRS that the button as well as the "end" software button dòn`t work ...
Applications which I use - no extra phon software, but magic button or the as follows: sk software, skype, sprite backup, webis etc.
It's your hardware controller card, gone bad. After some time all of your front button will stop responding. I had the same problem, sent to Dopod service center and got it fixed.
Its not any of ROM issues what so ever. Its a common defect of some earlier batch, as told by the techies at the Service Center.
berdinkerdickle said:
And as long as we're giving advice, this forum prefers possible concerns or issues be posted in the already available thread.
For example; if you're having problems with Black Majik, no need to start another thread, just post in the already available thread.
Click to expand...
Click to collapse
Heh, I made the same assertion once and was told on no uncertain terms that I was wrong.
It seems that it is not the hardware because it is wonderful working when I`m not online with GPRS or 3G !
So what elese can I do ? Should I try another ROM or can I just install an updated file for the GPRS issue ?
PLs help
please remember this is a Dev forum and I believe you answered your own question try flashing another ROM and see if that fixes it. I have no idea about updated GPRS software - you mean a radio ROM? just flash another OS and see if that works its not a problem with 3Gvp's rom but maybe you had a bad flash
vp3G said:
Heh, I made the same assertion once and was told on no uncertain terms that I was wrong.
Click to expand...
Click to collapse
LOCK:Enabled
EXEC:\xda-developers\HiJack.exe
Forum Rules:
http://forum.xda-developers.com/announcement.php?f=355
And Particularly this comment:
pof said:
post a comment to the relevant thread instead of starting a new one.
Click to expand...
Click to collapse
END: HiJack.exe
LOCK: Disabled
RST: Reset
@berdinkerdickle: Yep, at the time I cited that stuff too... and was told by a certain mod that I was still wrong!
peter7 said:
It seems that it is not the hardware because it is wonderful working when I`m not online with GPRS or 3G !
So what elese can I do ? Should I try another ROM or can I just install an updated file for the GPRS issue ?
Click to expand...
Click to collapse
Hmmm... that's an interesting twist on the problem I've never heard before. I would suggest a) hard reset b) reflash my ROM c) flash another ROM. I'd probably also go with a Cingular version of the radio for now ... 1.40 or 1.48.
VP - shouldn`t I start with a new radio rom version before I reinstall your ROM ??? At the moment I`m using the 1.43 version
Up to you, but I thought you said you'd already changed radios. I'd probably go for the hard reset and see if it works before installing anything else.
Hi VP, your advice worked - I changed to ROM 1.48 and now when I dial the online connection is stopped and reactivated after the phon call.
THANK you so much !!!!!!!!!!!!!!!
Best regards
from Germany
Active Sync Error
VP - it´s again me - pls can you look at my problem: My Tytn is telling me -in the meantime several times a day -that I have to resynchronize and after I got the warning to resynchronize there comes the next warning that there is no IP number !
Hi,
I have a huge problem with my Xperia Arc S. I don't know if it's due to the JJHybrid 3.1 or it's a hardware problem:
Sometimes, friends arn't able to join me. If someone call me, he directly get the mail box.
If I make a call or send a sms, I receive all the sms at once. Someone date back no more than 3 hours!
So, what can I do? Warranty?
Thanks you.
You should have basebabd .72 + the libs for it flashed onto your phone (since your on ICS), if you do then re-flash your ROM... if the problem still continues its best to use your warranty
I have the correct baseband but I'm not sure for the libs. How check that?
I don't know if this problem is known with the rom. I would like to post in the Release thread but I'm only a junior member
Could it be your operator's issue?
No way, this problem is frequent...
Hi
I use TaskSync since a lot of month without any Problem, works very well.
But since CM11 Nightly from 02.07. it doesn't work anymore. In the tray there is only an error message, I can't open the open in any way and it doesn't synchronize. Can anybody please help me? I can't flash any new Nightly, because I need the Task sync.
I have tried Task & note sync but this doesn't work how I need it, I need to show the Tasks in Agenda Widget, TaskSync has done this.
Has anybody an Emailadress of the CM developers, please? Maybe one of them can help me with my Problem, The developer from TaskSync doesn't answer me.
Hello everybody
Since the beginning with my zenfone 2 i have the same problem all the day 3-4times a day
All my contact disappears ..I see just the number of the contact in my message and the call log is empty
For resolve the problem..I reboot my phone and it's work for 1-2hour
I try to desactivate the synchronisation automatic but it's not work ..I try to stay with the synchronisation manually but it's the same problem :/
When i go to "my account" in parameters and after in "google" i see " the synchronisation meet problem and will be soon restored"
Why?? Oh yes i forget to say i try custom rom based on stock rom and custom rom based on cyanogen and it's the same problem :'(
What is the solution please? I am alone with this problem or is a famous problem?
Thank you
Nobody please ??
Hi guys
please allow me to bring to you a problem thta is very very stressful.
I have a SM-N976B Note 10+5G, used in 4G/3G network and in 99% of the situation when an incoming call is on the screen, if I respond quick to the call the result is that the call is not established, and the phone is kind of freezing.
I need for almost every call to let the incoming call ring for more then 10 seconds and answer only after this time.
I done several updates and look on the internet for any solution to solve this annoing issue but without result.
Kindly help with any suggestion
thanks
Hi @cretu22
In order to anyone here to help you in any meaningful way, would be necessary that you provide the devices status/config.
- Is it rooted?
- Which ROM/Firmware?
- Did you already tried updating with a stock firmware that matches your region/country/provider exactly?
- Mods applied?
We will be watching.
Nice regards.
.
hi
thanks for your answer
- the phone is not rooted
-it has stock firmware for EMEA/Romania
- updated to the last firmware original OTA
-no mods, launchers, etc applied
- atttached snaps from phone
Hi @cretu22
From your screenshots I couldn't exactly pinpoint the firmware you've flashed because, as you can see on the link below, there is 2 different N976BXXU6DTH7. They differ by the CSC versions (N976BXXU6DTH7, N976BOXM6DTI2) despite having the same exact build date.
https://www.sammobile.com/samsung/galaxy-note-10-plus/firmware/SM-N976B/ROM/
Your baseband version is DTH5 which relates to the initial issue but unfortunately sammobile does not expose the baseband version of neither.
What I may suggest is that:
1st) try the DTH7 one of the above that you are not currently in.
2sd) if still doesn't solve the issue, try an older one with a different baseband.
I can see that the firmwares are only available to fast downloads @ sammobile so I shall suggest using Samfirm to help you on this and, consequently, flash them through ODIN.
https://samfirmtool.com/
Keep us updated of your findings.
Nice regards.
.
thanks
I will folow your suggestions
have a nice weekend
hi
i had made some reasearch on this issue and the onclusion was that the firmwares that the phone has are the original and recommended ones.
further I made some teste:
I close all applications on the phone and test receiving calls: answering very quickly works like a charm.
opening various applications like facebook, whattasp, etc and test receiving calls: answering very quickly is not working
so I should conclude that is not a problem of radio modem, but something related to running applications
thanks