Hi guys
please allow me to bring to you a problem thta is very very stressful.
I have a SM-N976B Note 10+5G, used in 4G/3G network and in 99% of the situation when an incoming call is on the screen, if I respond quick to the call the result is that the call is not established, and the phone is kind of freezing.
I need for almost every call to let the incoming call ring for more then 10 seconds and answer only after this time.
I done several updates and look on the internet for any solution to solve this annoing issue but without result.
Kindly help with any suggestion
thanks
Hi @cretu22
In order to anyone here to help you in any meaningful way, would be necessary that you provide the devices status/config.
- Is it rooted?
- Which ROM/Firmware?
- Did you already tried updating with a stock firmware that matches your region/country/provider exactly?
- Mods applied?
We will be watching.
Nice regards.
.
hi
thanks for your answer
- the phone is not rooted
-it has stock firmware for EMEA/Romania
- updated to the last firmware original OTA
-no mods, launchers, etc applied
- atttached snaps from phone
Hi @cretu22
From your screenshots I couldn't exactly pinpoint the firmware you've flashed because, as you can see on the link below, there is 2 different N976BXXU6DTH7. They differ by the CSC versions (N976BXXU6DTH7, N976BOXM6DTI2) despite having the same exact build date.
https://www.sammobile.com/samsung/galaxy-note-10-plus/firmware/SM-N976B/ROM/
Your baseband version is DTH5 which relates to the initial issue but unfortunately sammobile does not expose the baseband version of neither.
What I may suggest is that:
1st) try the DTH7 one of the above that you are not currently in.
2sd) if still doesn't solve the issue, try an older one with a different baseband.
I can see that the firmwares are only available to fast downloads @ sammobile so I shall suggest using Samfirm to help you on this and, consequently, flash them through ODIN.
https://samfirmtool.com/
Keep us updated of your findings.
Nice regards.
.
thanks
I will folow your suggestions
have a nice weekend
hi
i had made some reasearch on this issue and the onclusion was that the firmwares that the phone has are the original and recommended ones.
further I made some teste:
I close all applications on the phone and test receiving calls: answering very quickly works like a charm.
opening various applications like facebook, whattasp, etc and test receiving calls: answering very quickly is not working
so I should conclude that is not a problem of radio modem, but something related to running applications
thanks
Related
Hi community - I updated to VP3G and now either the red button nor the end button finishes the call - this is bad - any idea what I can do ?
peter7 said:
Hi community - I updated to VP3G and now either the red button nor the end button finishes the call - this is bad - any idea what I can do ?
Click to expand...
Click to collapse
Tough to answer with any certainty without knowing more details. Could be your radio - I had that same problem with some radios. Since going with this ROM I have not had the problem. Also what apps do you have loaded?
Mark.
peter, it is something you have done as no one else has had this issue.
What radio? What software have you installed? Using a different Dialer? Hard reset?
We need more information besides "it doesn't work".
And as long as we're giving advice, this forum prefers possible concerns or issues be posted in the already available thread.
For example; if you're having problems with Black Majik, no need to start another thread, just post in the already available thread.
Thanks
Berd
Yes first I thought it is the radio so I switched to Radio 1.43 but the problem is still there. Now I found out it is more the case when I`m connected via GPRS that the button as well as the "end" software button dòn`t work ...
Applications which I use - no extra phon software, but magic button or the as follows: sk software, skype, sprite backup, webis etc.
It's your hardware controller card, gone bad. After some time all of your front button will stop responding. I had the same problem, sent to Dopod service center and got it fixed.
Its not any of ROM issues what so ever. Its a common defect of some earlier batch, as told by the techies at the Service Center.
berdinkerdickle said:
And as long as we're giving advice, this forum prefers possible concerns or issues be posted in the already available thread.
For example; if you're having problems with Black Majik, no need to start another thread, just post in the already available thread.
Click to expand...
Click to collapse
Heh, I made the same assertion once and was told on no uncertain terms that I was wrong.
It seems that it is not the hardware because it is wonderful working when I`m not online with GPRS or 3G !
So what elese can I do ? Should I try another ROM or can I just install an updated file for the GPRS issue ?
PLs help
please remember this is a Dev forum and I believe you answered your own question try flashing another ROM and see if that fixes it. I have no idea about updated GPRS software - you mean a radio ROM? just flash another OS and see if that works its not a problem with 3Gvp's rom but maybe you had a bad flash
vp3G said:
Heh, I made the same assertion once and was told on no uncertain terms that I was wrong.
Click to expand...
Click to collapse
LOCK:Enabled
EXEC:\xda-developers\HiJack.exe
Forum Rules:
http://forum.xda-developers.com/announcement.php?f=355
And Particularly this comment:
pof said:
post a comment to the relevant thread instead of starting a new one.
Click to expand...
Click to collapse
END: HiJack.exe
LOCK: Disabled
RST: Reset
@berdinkerdickle: Yep, at the time I cited that stuff too... and was told by a certain mod that I was still wrong!
peter7 said:
It seems that it is not the hardware because it is wonderful working when I`m not online with GPRS or 3G !
So what elese can I do ? Should I try another ROM or can I just install an updated file for the GPRS issue ?
Click to expand...
Click to collapse
Hmmm... that's an interesting twist on the problem I've never heard before. I would suggest a) hard reset b) reflash my ROM c) flash another ROM. I'd probably also go with a Cingular version of the radio for now ... 1.40 or 1.48.
VP - shouldn`t I start with a new radio rom version before I reinstall your ROM ??? At the moment I`m using the 1.43 version
Up to you, but I thought you said you'd already changed radios. I'd probably go for the hard reset and see if it works before installing anything else.
Hi VP, your advice worked - I changed to ROM 1.48 and now when I dial the online connection is stopped and reactivated after the phon call.
THANK you so much !!!!!!!!!!!!!!!
Best regards
from Germany
Active Sync Error
VP - it´s again me - pls can you look at my problem: My Tytn is telling me -in the meantime several times a day -that I have to resynchronize and after I got the warning to resynchronize there comes the next warning that there is no IP number !
Hello,
I updated to this firmware here:
http://forum.xda-developers.com/showthread.php?t=933555
Everything seemed to go fine, it updated fine, however, I'm now having a problem with opening my dialler and contacts. It says that the application is not installed whenever I click on contacts, and when I go into my dialler I can enter part of a number, and then it throws me out. I'm also having trouble connecting to my PC over wi-fi, however my wi-fi works on it.
Is there any way that someone could help me with this? I have tried searching the forum, however the search function appears to be down.
Thank you in advance.
You flashed a preview build that has been "leaked on a Chinese forum".
I'm not at all an expert when it comes to Android internals, but my judgment tells me, you kind of have to expect those kind of ROMs to have bugs.
k1337Ultra said:
You flashed a preview build that has been "leaked on a Chinese forum".
I'm not at all an expert when it comes to Android internals, but my judgment tells me, you kind of have to expect those kind of ROMs to have bugs.
Click to expand...
Click to collapse
Vielen Dank.
I have installed another rom and I now have my contacts back and I can dial again as well.
I'm glad I haven't messed up my Defy, only got it today!
Gern geschehen .
Another info that could be useful for you: custom ROMs that use the leaked Chinese Froyo FW can destroy your camera flash if you don't got a Chinese version of the phone. The sticky thread in the development forum contains more details on this topic.
Hi,
I have a huge problem with my Xperia Arc S. I don't know if it's due to the JJHybrid 3.1 or it's a hardware problem:
Sometimes, friends arn't able to join me. If someone call me, he directly get the mail box.
If I make a call or send a sms, I receive all the sms at once. Someone date back no more than 3 hours!
So, what can I do? Warranty?
Thanks you.
You should have basebabd .72 + the libs for it flashed onto your phone (since your on ICS), if you do then re-flash your ROM... if the problem still continues its best to use your warranty
I have the correct baseband but I'm not sure for the libs. How check that?
I don't know if this problem is known with the rom. I would like to post in the Release thread but I'm only a junior member
Could it be your operator's issue?
No way, this problem is frequent...
Yesterday I bricked my brand new P8000(B) - the new version with Marshmallow 'out of the box' (and the new SIM slots etc...)
I tryed to reflash several stock- and custom ROM's but they don't work because they are made for the 'old' version and there must be major differences in the hardware. At the moment the main problem is that the LCD driver is wrong and the display shows only lines and blurry spots
The Phone was running on ROM "P8000_6.0_20160516" - this ROM is not available at needrom or bbs.elephone.hk even Google doesnt know
It would help a lot if some could supply the ROM "P8000_6.0_20160516" - thank you!
FrauHofrat said:
Yesterday I bricked my brand new P8000(B) - the new version with Marshmallow 'out of the box' (and the new SIM slots etc...)
I tryed to reflash several stock- and custom ROM's but they don't work because they are made for the 'old' version and there must be major differences in the hardware. At the moment the main problem is that the LCD driver is wrong and the display shows only lines and blurry spots
The Phone was running on ROM "P8000_6.0_20160516" - this ROM is not available at needrom or bbs.elephone.hk even Google doesnt know
It would help a lot if some could supply the ROM "P8000_6.0_20160516" - thank you!
Click to expand...
Click to collapse
I can do nothing else than blaming you, I wrote a reply yesterday to the eragon forum that there's someone else who flashed -not even a custom rom- just the root .zip that was for the "old" p8000 and got his phone bricked the same way as you (LCD driver problem). That's why I asked for a dump/backup. It could have been useful for you too (as in this case) and for the other guy too. But nevermind, I hope that you learn from this for later things... anyways, the other guy has contacted elephone on their facebook, so I hope you'll get the rom so you can use your device again. Good luck!
I have this version too, just got it today.
If someone can explain to me how to create the scatter file and the backup, I'll do it.
I have some experience with this stuff, but MTKDroidTools tells me unknown rom structure.
Any help?
I do have the same problem (see here: http://forum.xda-developers.com/elephone-p8000/general/rom-p8000-t3431571 ). I just wanted to root the phone because I liked to change the wifi modem file but i didn't even realize that I got another version of the phone at this point, so I bricked it.
I also contacted the support via facebook, but the support guy had to ask the engineers for help.
But maybe someone can help Emileh taking a dump of his phone, that would be really great!
@ardrift
you are sooo right but I have'n expected that two phones of the same type contain conplete different hardware respectively the firmware is not supporting both hardware versions. Even the manufacturer does not metion to check the hardware version before flashing...
@Emileh @flo1k
I do have a second 'untouched' P8000(B) too - and I'm starving to copy the firmware from this working phone to the faulty phone if someone could explain how...
problem solved
flo1k managed to get a stock ROM for this hardware version - the softwarepackage is named K06TE-A.A.vR14.E1.160707 and should be available at the elephone forum soon....
Further information you can get here http://forum.xda-developers.com/elephone-p8000/general/2016-version-fingerprint-scanner-t3436270
Does anyone know if the galaxy watch can flash roms and have custom OS's like on previous generations? Can it use roms made for the gear s3? What are your thoughts on the default rom with tizen 4.0? What would you want from any custom rom?
Let's start a discussion on this topic!
I am pretty sure roms from the gear s3 will not work. Also why would someone Flash an old rom on a new watch? Doesn't make any sense to me.
Source Code is here:
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=SM-R8
Code:
SM-R800
SM-R805F
SM-R805N
SM-R805U
SM-R810
SM-R815F
SM-R815N
SM-R815U R800XXU1ARGB,
R810XXU1ARGB,
R805USQU1ARH1,
R815USQU1ARH1,
R805NKOU1ARH9,
R815NKOU1ARH9,
R805FXXU1ARH4,
R815FXXU1ARH4
Only as info...
Btw...
Tizen 4 seems to have same Bug like 3 or 2.3 so IMHO 5 will not be much better...
It is Samsun. s h...
Best Regards
Big_Balls said:
I am pretty sure roms from the gear s3 will not work. Also why would someone Flash an old rom on a new watch? Doesn't make any sense to me.
Click to expand...
Click to collapse
I was just wondering whether or not they would be similar. I've seen a phone before that could run a rom from another phone, that's why I was asking. Didn't expect much tbh
Hi all. Can anyone help me with a odin files for the first software of this watch. I am have the next problem:
Hello! Since the new software update earlier this week I am having a problem with my screen brightness setting which I have set at 8. When my watch goes into AOD mode, after the 15 second screen timeout, and then when the screen goes back on again the brightness setting is down to 3. Then I change it back to 8, the screen goes into AOD, and when the screen goes back on it is down to 3 again. Every time. Never had a problem like this before the recent software update, or on my Gear S3 for years. I turned the watch off for a few hours, and then turned it back on, but the problem persists. Has anyone else had this problem, or know how to fix it? Thanks!!!
Please can anyone hrlp me with the idin files plss
@cboghiu
Model Name?
SM-R800 or SM-R815 or ..?
Best Regards
SM-R800
Thanks.
Code:
R800XXU1[B]ARH3[/B]_OXA1ARH3
I have this Firmmware for Odin...
IMHO oldest... "first"...
Confirmed as working for few users...
If you need PM me...
Best Regards
Edit 1.
This seems the Update history for SM-R800... BRJ4 latest...
Code:
R800XXU1ARH1/R800OXA1ARH1
R800XXU1ARGC/R800OXA1ARGC
R800XXU1BRH3/R800OXA1BRH3
R800XXU1BRJ4/R800OXA1BRJ4
Edit 2.
These Versions on paid sites...
https://easy-firmware.com/index.php?a=downloads&b=folder&id=35740
http://www.gsm2file.com/index.php?file=/Samsung Flash Files/R Series/R800 Gear S4 Firmware
Code:
R800XXU1ARH1_R800OXA1ARH1
R800XXU1ARH3_R800OXA1ARH3
R800XXU1BRH3 R800OXA1BRH3
R800XXU1BRI6
R800XXU1BRJ4 R800OXA1BRJ4
netOdin + some maybe helppfull infos + Videos:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
Confirmed also working with SM-R8.. devices.
Best Regards
Thanks you very much for the firmware and for the netodin. I knew about net odin. But you git me worry o bit if it is safe to fkash yhe h3 verson over the j4(last one with i have, the one with tge bug) fir ne not to brick tge watch.
Thanks again.
Own risk...
I have no feedback about downgrade from R800XXU1BRJ4...
Remember Samsungs "great" Rollback Prevention cra ehm """feature"""...
Best Regards
got the source code for the galaxy watch from the above link, now just trying to find the MP3 files that control notifications. anyone have any ideas?
@Shadow_Sheik
You mean this Source Code?
Code:
SM-R800_Opensource.zip
https://forum.xda-developers.com/showpost.php?p=77896792&postcount=3
IMHO not all files inside to create whole Platform stuff what is inside rootfs.img and/or csc.img...
If you mean Linux Kernel aka dzImage...
Best Regards
Request USB Pinout... for SM-R800 and SM-R810.
Thanx in advance.
Best Regards
Can somebody help to compile Kernel for SM-R8...?
I mean as some tiny exercise...
https://forum.xda-developers.com/showpost.php?p=78281382&postcount=662
These are my attempts...
Best Regards
fw files
can anyone send me a link to the fw files?
SM-R800
https://forum.xda-developers.com/showpost.php?p=78393393&postcount=667
Progress in build Kernel...
Only as info...
Best Regards
Nice Video about SM-R800 SM-R810... and USB cable:
https://www.youtube.com/watch?v=oQNOaZ8-BTQ&feature=youtu.be
Only as info.
Best Regards
SM-R810x
Hello Adfree.
Nice video btw. Thanks for that.
I have the exact same issue like Alejandro in the video, and the exact same model: SM-810X.
Is there any way you can provide me with the rom files for this model? I would like to give it a try, and flash the files, rather keep it in the drawer...
Much appreciated any help.
Cheers!
https://4pda.ru/forum/index.php?showtopic=911358&st=10040#entry80798650
Here are few Firmwares for SM-R800 and SM-R810 and also for SM-R810X
@TrancY01
2 of these Firmware for SM-R810X Live Demo Unit
Attention for the others...
XXX is WRONG and can brick your device!
So it is important to check filename with open eyes... to find XX or XXX
I mean no films for adults...
I mean this:
Code:
R810[COLOR="Red"][B]X[/B][/COLOR]XXU1ARH1
R810[COLOR="Red"][B]X[/B][/COLOR]XXU1ARJ1
Best Regards