Develop Bugs

Touch Pro ROMs on Diamond?

Hi everyone!
I've been thinking...The Touch Pro and the Diamond are almost identical(except for Pro's hardware qwerty and Internal Memory/SD),but available ROMs differ significantly.So before trying anything I wanted to ask...Is there any way to flash a ROM for Touch Pro to Diamond?Without bricking or ruining it of course!

You should try it yourself - hope you're lucky enough to be the 1st who can flash Touch Pro to Diamond :wink:

But with the possibility of bricking my device?

no that wont happen, you will just be possible to flash a new diamond stock rom will it brick and then a custom rom
please try and give us feedback

Downloading TAEL ROM v4...Posting back asap!

tolis626 said:
Downloading TAEL ROM v4...Posting back asap!
Click to expand...
Click to collapse
oke but remember to flash ti through internal storage. so not from the pc;P
//Nick

Tried with default RaphaelWrapper RUU and flashing failed saying something about invalid model ID(obviously).Will try with diamond's custom RUU and report back.

nickislauw said:
oke but remember to flash ti through internal storage. so not from the pc;P
//Nick
Click to expand...
Click to collapse
Why is that?

tolis626 said:
Why is that?
Click to expand...
Click to collapse
Because if you flash trough pc you will get the error saying that is not for your phone

Yes...Now that you mentioned it!
And how exactly do I flash a ROM from the internal storage?I renamed the nbh file to DIAMING.nbh and copied it to the root of my internal storage.Then I reseted while holding volume down key,got into bootloader(or whatever that screen which says what SPL I am using is called) but then nothing,it just stays there...What next?

tolis626 said:
Yes...Now that you mentioned it!
And how exactly do I flash a ROM from the internal storage?I renamed the nbh file to DIAMING.nbh and copied it to the root of my internal storage.Then I reseted while holding volume down key,got into bootloader(or whatever that screen which says what SPL I am using is called) but then nothing,it just stays there...What next?
Click to expand...
Click to collapse
you have to press volume down and back key...but be aware that the touch pro has more ram

tolis626 said:
Yes...Now that you mentioned it!
And how exactly do I flash a ROM from the internal storage?I renamed the nbh file to DIAMING.nbh and copied it to the root of my internal storage.Then I reseted while holding volume down key,got into bootloader(or whatever that screen which says what SPL I am using is called) but then nothing,it just stays there...What next?
Click to expand...
Click to collapse
oke you press: THE RED SOFT RESET BUTTON + VOL DOWN + BACK BUTTON (THE BUTTON WITH THE ARROW ON IT)
then you will be taken to the screen to flash
//Nick

Right,it does try to flash,but I have encountered a minor issue...It says something about MoviNand MFG(Internal storage I guess?),goes past that and gets to a screen saying "Trigger USB Host...",I wait for a few seconds and then a message with red letters appears right below that says something about retrying with the usb...Then it goes all over again,but some distorted lines appear on the screen...And no matter how long I let it stay there it repeats again and again!Now what?Is that an "omen" of failure?
EDIT
Might it have something to do with the ROM's pagepool being at 24mb?It's a windows 6.5 ROM and as HELICOPTER88 has said,the diamond has less RAM than the pro...Trying again with 12mb pagepool.
EDIT 2
Nope...Same s**t again!It says "Retry connect USB"...And I think that for a fraction of a second it says "No Image Found"...

tolis626 said:
Right,it does try to flash,but I have encountered a minor issue...It says something about MoviNand MFG(Internal storage I guess?),goes past that and gets to a screen saying "Trigger USB Host...",I wait for a few seconds and then a message with red letters appears right below that says something about retrying with the usb...Then it goes all over again,but some distorted lines appear on the screen...And no matter how long I let it stay there it repeats again and again!Now what?Is that an "omen" of failure?
EDIT
Might it have something to do with the ROM's pagepool being at 24mb?It's a windows 6.5 ROM and as HELICOPTER88 has said,the diamond has less RAM than the pro...Trying again with 12mb pagepool.
EDIT 2
Nope...Same s**t again!It says "Retry connect USB"...And I think that for a fraction of a second it says "No Image Found"...
Click to expand...
Click to collapse
do you have put the file and renamed it diamimg.nbh in the root of the internal memory?

HELICOPTER88 said:
do you have put the file and renamed it diamimg.nbh in the root of the internal memory?
Click to expand...
Click to collapse
Yep,all as I was instructed!

tolis626 said:
Yep,all as I was instructed!
Click to expand...
Click to collapse
i get your problem sometime and what i did was removed the file and then copied it back or format internal storage. then in should work.

nickislauw said:
i get your problem sometime and what i did was removed the file and then copied it back or format internal storage. then in should work.
Click to expand...
Click to collapse
exactly what happens to me sometimes maybe do mtty then hard reset then flash

Bah...Tried another ROM(Energy series this time) and got the same problem...Also,when the screen says that it's loading,some red numbers appear above it...something like 005028 I think...Maybe an error?
Also,I have no idea on how to use MTTY and am a little afraid to tamper with my new Windows 7 installation which was a bane getting it to be how I wanted!Can anyone else try?Maybe someone of you is luckier than me!

tolis626 said:
Bah...Tried another ROM(Energy series this time) and got the same problem...Also,when the screen says that it's loading,some red numbers appear above it...something like 005028 I think...Maybe an error?
Also,I have no idea on how to use MTTY and am a little afraid to tamper with my new Windows 7 installation which was a bane getting it to be how I wanted!Can anyone else try?Maybe someone of you is luckier than me!
Click to expand...
Click to collapse
tomorrow i will try...i'm using windows 7 too

HELICOPTER88 said:
tomorrow i will try...i'm using windows 7 too
Click to expand...
Click to collapse
Good...And may the force be with you my friend!
Will check to see how it went!If anyone finds anything out please post!Good night!

HTC desire 2.2 HELP please

Ok so, this is my first android phone and after being prompted to install the 2.2 update on my European htc desire, i downloaded and started it installing. It gets to about 23% and says process system unavailible and after reading what people said i cleared the phone and tried to install the update manually from the SD card. This didn't work
My phone currently does this
Will boot into what it says is 2.2 but with no wifi, no service, and no SD card showing up
then after about 5 minutes it will reboot.
I have no idea what i can do to fix this? could someone please help me, i'm a noob with android so a clear step by step would be much appreciated

anyone

I am having the same issue... Anyone some help please...

I had a symetrical experience.. I can't post links yet, but you if you look at my posts you should be able to find what worked for me.

Futurian said:
I had a symetrical experience.. I can't post links yet, but you if you look at my posts you should be able to find what worked for me.
Click to expand...
Click to collapse
how did you create a blank goldcard, i can't access my SD card on my phone while it's in the phone so how did you do it

Do you have a WIFI connection? I do, and did the OTA 2.2 upgrade over WiFi with no problems, on my Unbranded European HTC Desire.
If youre phone won't boot properly, there are a few answers; 1) Return in to HTC, they're getit working and back to you, 2) Return it to th place of purchase, 3) Root/reflash (but sounds like it might not be an option).
Dale

F3L1X1 said:
how did you create a blank goldcard, i can't access my SD card on my phone while it's in the phone so how did you do it
Click to expand...
Click to collapse
I followed the instuctions in the "[TUT]Complete upgrading guide(root, unroot, flashing ROM & updates)" thread within Desire Android Development. (Post #3)
dedlite said:
Do you have a WIFI connection? I do, and did the OTA 2.2 upgrade over WiFi with no problems, on my Unbranded European HTC Desire.
If youre phone won't boot properly, there are a few answers; 1) Return in to HTC, they're getit working and back to you, 2) Return it to th place of purchase, 3) Root/reflash (but sounds like it might not be an option).
Dale
Click to expand...
Click to collapse
When I got in touch with HTC they wanted £50 to do a reflash, falsely accusing me of rooting my device..

was that 50$ to send it to them? or can they do it without having it there. Because if THEIR update screwed up my phone i don't see why i should have to pay for a fix

maybe a silly question but did you try a factory reset?
http://www.htc.com/www/howto.aspx?id=805&type=1&p_id=312

HugoTouchHD said:
maybe a silly question but did you try a factory reset?
http://www.htc.com/www/howto.aspx?id=805&type=1&p_id=312
Click to expand...
Click to collapse
yeah i did that, about the only advice the australian HTC support guy gave me -____-

F3L1X1 said:
was that 50$ to send it to them? or can they do it without having it there. Because if THEIR update screwed up my phone i don't see why i should have to pay for a fix
Click to expand...
Click to collapse
Tell me about it, so thankful I managed to fix it myself!

It sounds like you are alll applying an OTA update for the standard ROM to what was a branded device. There are lots of explanations as to how to fix this if this is the case
In summary
Download update from mentioned here
Copy this to root of your goldcard and rename to update.zip
Turn off phone
Turn on holding down vol down
Select Bootloader then Recovery (an image of device should appear with exclamation mark over)
In menu (sorry forgot how you get in, if it does not appear then try power+vol down or power + back). From there choose apply update.zip
Wait while update applied
After update select reboot and wait for device to boot
Video of it here

jameson_uk said:
It sounds like you are alll applying an OTA update for the standard ROM to what was a branded device. There are lots of explanations as to how to fix this if this is the case
In summary
Download update from mentioned here
Copy this to root of your goldcard and rename to update.zip
Turn off phone
Turn on holding down vol down
Select Bootloader then Recovery (an image of device should appear with exclamation mark over)
In menu (sorry forgot how you get in, if it does not appear then try power+vol down or power + back). From there choose apply update.zip
Wait while update applied
After update select reboot and wait for device to boot
Video of it here
Click to expand...
Click to collapse
I've just tried this again, installation looked like it went through ok, rebooted and relaoded into sense, then it shows me a status bar counting, normally this gets to about 10% then says ?Sorry process system is not responing, so i can either click wait or force close, then in continues upto about 97% then reboots and reloads only to load a white screen showing htc and continues counting in percentages, gets to about 15% then says force close, then onto about 91% then reboots this goes on for a while until it just shows me a sorta bricked phone with no wifi, gsm or any real functionailty and it continues to reboot every 5 mins, back to where I started showing 2.2 as installed
One strange thing I have noticed is that my CID is
CID: 00000000000000000049E917D100A69E
Reversing CID
CID: 00A600D117E949000000000000000000

Can't find update.zip on SD card during recovery
Tried all this, thanks. Goldcard created using Gold Card Tool 0.0.5 (awesome job Klutsh) . I get the error message:
"E:failed to open /sdcard/update.zip (No such file or directory)" even though it is in the root dir when I look at the card on my PC.
Should it be in a directory called /sdcard ?

chessmaster82 said:
I've just tried this again, installation looked like it went through ok, rebooted and relaoded into sense, then it shows me a status bar counting, normally this gets to about 10% then says ?Sorry process system is not responing, so i can either click wait or force close, then in continues upto about 97% then reboots and reloads only to load a white screen showing htc and continues counting in percentages, gets to about 15% then says force close, then onto about 91% then reboots this goes on for a while until it just shows me a sorta bricked phone with no wifi, gsm or any real functionailty and it continues to reboot every 5 mins, back to where I started showing 2.2 as installed
One strange thing I have noticed is that my CID is
CID: 00000000000000000049E917D100A69E
Reversing CID
CID: 00A600D117E949000000000000000000
Click to expand...
Click to collapse
i get this same problem. How do i create a gold card if when i plug in my phone to my pc it won't recognise it and when i put the SD in the phone the bricked 2.2 won't recognise it

F3L1X1 said:
i get this same problem. How do i create a gold card if when i plug in my phone to my pc it won't recognise it and when i put the SD in the phone the bricked 2.2 won't recognise it
Click to expand...
Click to collapse
I had to format the card in a card reader in my PC, then use the Gold Card Creator mentioned elsewhere in the thread. You have to install HTC Sync because enough drivers are in there to at least allow the apps to 'see' the card at physical level, even if the bricked Android doesn't. Set the phone to USB debug mode in Settings/Applications - the phone stays 'on' long enough between reboots to do that and get a CID out of it! Then Gold Card Creator works well enough to get the CID from the SD.
I'm trying this again with a 2GB card to see if makes any difference.

Check folder settings when using windows
bearMedicine said:
Tried all this, thanks. Goldcard created using Gold Card Tool 0.0.5 (awesome job Klutsh) . I get the error message:
"E:failed to open /sdcard/update.zip (No such file or directory)" even though it is in the root dir when I look at the card on my PC.
Should it be in a directory called /sdcard ?
Click to expand...
Click to collapse
Quick update to this. Make sure you have extensions of known file types SHOWING in your folder settings. I was naming the file update.zip.zip!!
Thanks to ALL in this forum for get apps and assistance. I unbricked my phone tonight thanks to you all

well i phoned the shop here in australia that i bought it from and they said they've had alot of desires being returned because they've been bricked by the update and to just send it back and they'll fix it and update to 2.2 for me

Twlauncher needed

Can anyone upload touchwiz30 launcher.apk and odex files actually accidentally I deleted them plz help

Here is touchwiz3 from JPC.
http://db.tt/KbYBYv4

DoesIt workmy firmware is ddjf6 and what about odex files does it needed and how to install this

Friends it giving parsing pakage error

You'll have to copy the two files in system/app folder with rootexplorer.
PS: you need to have your phone rooted.

I have pasted them still its giving android.process.acore has stopped unexpectedly error plz help

The JPC-Edition ist from Froyo and don't work on Eclair

Plz tell me where I can find eclair ver plz help some body having it

here is the eclair version from jm7 hope this will work for you
http://db.tt/bzLzrQm
Sent from my GT-I9000 using XDA App

Same problem still stuck
johcos said:
You'll have to copy the two files in system/app folder with rootexplorer.
PS: you need to have your phone rooted.
Click to expand...
Click to collapse
I have the same problem, but i cant move the files from sd/downloads to system/apps i copy them with rootexplorer, but then dont give me the option to paste em... i just cant move the files to that folder, any ideas?

ok my bad, i wasnt copying properly... sorry

one problem solved
well i managed to copy and paste the files, but shortly after the phone went death.... and now it STILL DEAD!!! black screen just the 2 bottons left and right of the home button are on... and its been like that for 10 mins... wot went wrong?

Battery off and then reboot doesnt work?

Can you boot to recovery? If you can then do a factory reset.

Still stuck
Well, ive removed the battery and tryin to reboot, but same problem all over everytime, screen just black and no response whatsoever, with my mobile version, i think i cant go to reboot screen but the traditional method ( the power button combination ) so ive installed the sdk manager to do it through CMD, and before it worked ( before when i rooted and lag fixed my galaxy s i9000 ), but now it doesnt recognize the phone connected... so im totally stranded here...
well a little later, i managed to go into recovery screen, and did factory reset... still black brick... too bad i was lovin my galaxy s...

you click setting goto applycation check managerment click running choose file and clear data now reboot

nah the phone is dead, i think my another mistake here, is that i copied the twwiz3 and odex, for another version of my phone, that mite have killed if for good... it wont switch on, so now i basically cant do "anything" with it... ill try to send it to repairs...

[Q] Is it bricked?

so today i was updating my wildfire s' RUU and for some reason, it stopped and gave me a "cannot connect" error.
Now my phone wont turn on... it wont even go into hboot. what do i do now?
EDIT: it gives off two vibrations when trying to turn on but does nothing else

estabien said:
so today i was updating my wildfire s' RUU and for some reason, it stopped and gave me a "cannot connect" error.
Now my phone wont turn on... it wont even go into hboot. what do i do now?
EDIT: it gives off two vibrations when trying to turn on but does nothing else
Click to expand...
Click to collapse
The vibrations mean that it is in Qualcomm diagnostics mode......there was a thread in this forum about this.

oh crap im not feeling vibrations anymore....
edit how do i get into download mode

estabien said:
so today i was updating my wildfire s' RUU and for some reason, it stopped and gave me a "cannot connect" error.
Now my phone wont turn on... it wont even go into hboot. what do i do now?
EDIT: it gives off two vibrations when trying to turn on but does nothing else
Click to expand...
Click to collapse
Maybe try this one...
eoghan2t7 said:
there a way to fix it by creating a goldcard and run the ruu now press ctrl+r and type %temp% once your temp folder loads do a search in the temp folder for rom.zip rename that to to cant remember ill edit this post in a minute with the name you now copy the renamed file to the root of your sdcard and boot the phone as if you were going into hboot leave the phone for half and hour to 45 minutes to be on the safe side you the pull the battery and put it in again now try and boot your phone that worked on my mates wfs lets hope it works for you.
edit: rename it to PG76DIAG.zip its case senseitive.
p.s. most of the custom roms here are for gsm handsents and NOT cdma.
Click to expand...
Click to collapse
its from :
http://forum.xda-developers.com/newreply.php?do=newreply&p=19797955

i think i can do it if i could just get into download mode...
none of the methods that i have found are working.
also, i did what the quoted text said and i got "no results match your query" what does it mean by run the ruu... i opened it and just minimized it.
edit: i guess i flashed the wrong ruu... it was probably vm uk, heh heh.

estabien said:
i think i can do it if i could just get into download mode...
none of the methods that i have found are working.
also, i did what the quoted text said and i got "no results match your query" what does it mean by run the ruu... i opened it and just minimized it.
edit: i guess i flashed the wrong ruu... it was probably vm uk, heh heh.
Click to expand...
Click to collapse
Run the HTC ROM Install
then open "Run"- if with Windows and type %TEMP%
that leads you to the temp dir and then search for a file rom.zip, rename it and put it in you card...

i did exactly that and it still shows no results...
should i redownload the rom and just get the file?

Urgent Help Needed!

Hello....I bricked my I927 when I accidently formatted my efs partition when using EFS professional .....my phone boots in download mode.....but only boots till samsung logo screen.....I tried various things like installing stock GB and ICS through odin and installing custom firmware but phone boots onle till samsung logo and then lights up with sone stange colored thin lines and screen goes off.....In TRWP I get a "unable to mount preload" error whenever I try to install somethiing.....I suspect that the EFS partiton is corrupted and needs to be repartioned....I had backupped the efs folder when my phone was working before.....its in a tar format.....I read somwhere that someone made a recovery.zip out of his backedup EFS.IMG and flashed it with CWM solved his problems which were exactly similar to mine.....can somebody on the forum make a recovery.zip for I927 with update binary and script so that I can add the backedup EFS image to it and flash it with CWM? Please.....this would also help many others who are facing similar issues.....and also what do I do regarding the "unable to mount preload" error? I need to repartition and tried to install hemdall.....but get the common .dll error even after following all the instructions and installing C++ 2010.....

Hi, k one thing after the other.
Do you have repartitioned anything?
Do you have adb in place and does adb works when in TWRP?
The easiest thing would be to connect by adb then mount /efs and then restore the efs backup. The good is that you will have a good chance to recover your device. Maybe you need to reformat /efs but that depends.
Which timezone do you live? Maybe a Teamviewer session would be helpful?
.

Thank you for your reply sir...
THANKS FOR THE REPLY SIR....YES I WAS ABLE TO GO INTO CWM RECOVERY AND CONNECT THE PHONE WITH MINIMAL ADB FASTBOOT.....AND AFTER SPENDING ALMOST 2 DAYS CONTINUOUSLY TRYING TO FIND THE PROBLEM USING GOOGLE, I TRIED DIFFERENT COMMANDS ON ADB TO GET EFS BACK OJ THE PHONE....BUT WITH NO SUCCESS...... MY EFS BACKUP IS IN TAR FORMAT......IT WAS MADE USING GALAXYSIMUNLOCK BY SPOCKY.....I LATER TYPED IN 'ADB MESG'.....OR SOMETHING SIMILAR TO THAT COMMAND, AND FOUND OUT THAT ALL THE PARTITIONS ON mmcblk0 were mangled up with strange letters.....for eg, p1, p2, p3 and so on had strange characters written next to them.....SO I TRIED TO RE-PARTITION THE WHOLE THING WITH SDPARTED......AND IT RE-PARTIONED THE SYSTEM (AROUND 7000MB).....MMCBLK01 (AROUND 500MB).....AND ANOTHER THING I CANT REMEMBER NOW.....BUT WHEN IT FINISHED THE JOB, IT GAVE ME A mmcblk02 ERROR.....AND WHEN WHEN I CHECKED MY PHONE ON CWM SCREEN, IT GAVE ME A LIST OF CACHE ERRORS.....AND WHEN I SWITCHED OFF THE PHONE AFTER THAT IT REFUSED TO POWER ON.....IT WAS NOT EVEN GOING INTO DOWNLOAD OR RECOVERY MODE.....BATTERY HAD ENOUGH POWER....SO ITS NOT BATTERY FAULT......I SUPPOSE THAT SINCE THE PARTITIONS WERE FORMATTED THE PHONE BECAME COMPLETELY DEAD......CAN YOU TELL ME IF THERE IS ANY WAY WHERE I COULD GET THE COMPUTER TO RECOGNIZE MY PHONE USING A 'DEAD PHONE USB FLASH' OR SOMETHING.....AND THEN FLASH A BLANK BOOTLOADER AND THEN WRITE CWM?
I LIVE IN INDIA SIR.....+5.30 GMT.....I DO NOT KNOW ANYTHING ABOUT TEAMVIEWER.....IS IT AN ANDROID APP? CAN YOU EXPLAIN MORE IN DETAIL SIR?
PLEASE LET ME KNOW HOW TO GET THE COMPUTER TO RECOGNIZE THE PHONE AGAIN......

Well.. that sounds not that good...
Teamviewer (www.teamviewer.com) is an easy to use and free remote control software for your PC (it runs on both Linux and Windows). We could do a remote control session if you like. I can try to help but cannot promise anything.
I live in Germany: GMT +1. Send me a PM if you want to give that a try. Next Monday. Tuesday or Thursday would be possible on my site. At least for getting a short overview.
.

Thank you sir,
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....

alvcross said:
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
Click to expand...
Click to collapse
Ok I have made one. It want to say it was VERY hard to find the correct instructions to do so and therefore I'm absolutely not sure if that will work for you!
Test it if you like but again: I have no idea if that would damage anything more than it is now!
See --> http://forum.xda-developers.com/cap...od-unbrick-debrick-hard-bricked-i927-t3285505
If it worked for you (would be like a miracle) then please report back!
If it does NOT work for you please report back, too!
thanks
xdajog
.
UPDATE:
Besides the link I posted --> Could you please also try the following:
1) Power on your device and directly after that:
2) Press and hold down Vol Up + Vol Down (both the same time)
3) You should see a warning message like the attached one which is the APX mode
4) you need to release the vol buttons immediately after you see the APX mode otherwise it will continue to the non working download mode.

Does teamviewer require internet connection with a lot of data?
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....

alvcross said:
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
Click to expand...
Click to collapse
Uhm do you have read my above post??
.

1927 wouldn't boot.....Help.
Ohhhh Thank you.....thank you.....thank you for your kind reply Sir.....how good of you to take all your precious time to help me.....I greatly appreciate all your hard work Sir.....wonderful...*.I wanted to download your img file to try it out and when I read the reply of brother Bubor, that the I927 woudnt boot from the SD card when the bootloader is bricked, I was very disappointed. Like I said before, I have a very very slow internet connection with very less data left....and according to brother bubor's reply I doubt this will work....It looked like he was sure that it wont work....I tried to get into APX mode as the link that brother bubor posted had mentioned, but no luck, as the phone is not going into APX mode.....I remember that when I was trying to get to the APX mode the first time, the computer flashed a notification that the APX driver was not successfully installed.....but after that I tried the method more than a dozen times, but the computer was not recognizing the phone to go into APX mode.....Does the phone go into APX mode when the full internal phone system is formatted? I tried your second method on trying to get to APX mode, but nothing happens.....the computer is not recognizing the phone.....The battery had about 30% power in it when the phone got bricked 2 weeks ago.....Dont know if the battery drained all these days of not using the phone.....And even if I get to the APX mode, I have no idea how to proceed from there to repartition the internal phone system and get back download mode.....In the link that brother bubor posted the person who made the thread has made some files to be used when one gets into APX mode.....The PIT and emmc files which are necessary for repartitioning the system and getting the bootloader work are found in that zip file.....But that zip file is for the I9103 Galaxy R.....there isnt something like that available for the I927 yet.....And is brother bubor sure that the unbrick.img file wont work on the I927?

Give it a try with my unbrick image.
we all don't know.
.

xdajog said:
Give it a try with my unbrick image.
we all don't know.
.
Click to expand...
Click to collapse
Hi @alvcross: any update on this?
have you tried the SD card unbrick?
You said you cannot open the APX mode but what happens when you press the buttons for accessing the APX mode?
Try it even if you see a blank screen and then connect your Cappy with USB to your computer --> you should get a message about a missing driver or similar.
If that works I tell you how to proceed.

xdajog said:
hi @alvcross: Any update on this?
Have you tried the sd card unbrick?
You said you cannot open the apx mode but what happens when you press the buttons for accessing the apx mode?
Try it even if you see a blank screen and then connect your cappy with usb to your computer --> you should get a message about a missing driver or similar.
If that works i tell you how to proceed.
Click to expand...
Click to collapse
im so sorry that i was missing in this thread for a long time now sir.....i have had some issues at home and they have been sorted out lately.....yes sir.....i tried the sd card unbrick image....but my nothing happens.....when i try to hold volume up+power+home buttons and insert usb cable into my computer it says installing drivers and then says drivers failed to install....and nothing happens further.....can you help sir?

alvcross said:
im so sorry that i was missing in this thread for a long time now sir.....i have had some issues at home and they have been sorted out lately.....yes sir.....i tried the sd card unbrick image....but my nothing happens.....when i try to hold volume up+power+home buttons and insert usb cable into my computer it says installing drivers and then says drivers failed to install....and nothing happens further.....can you help sir?
Click to expand...
Click to collapse
Ok so you may try to install the special apx drivers now. Unfortunately I'm on vacation right now so I cannot upload them elsewhere. I come back to you next week.
Sent from my LG-H815 using XDA-Developers mobile app

xdajog said:
Ok so you may try to install the special apx drivers now. Unfortunately I'm on vacation right now so I cannot upload them elsewhere. I come back to you next week.
Sent from my LG-H815 using XDA-Developers mobile app
Click to expand...
Click to collapse
Oh yes Sir....Ill be waiting for the special apx driver package from you....Thank you so very much Sir.....God bless you.....

alvcross said:
Oh yes Sir....Ill be waiting for the special apx driver package from you....Thank you so very much Sir.....God bless you.....
Click to expand...
Click to collapse
No guarantee ! [emoji121]
Sent from my LG-H815 using XDA-Developers mobile app

xdajog said:
No guarantee ! [emoji121]
Sent from my LG-H815 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes Sir....I understand....

alvcross said:
Yes Sir....I understand....
Click to expand...
Click to collapse
Ok could you please try these driver package here: http://forum.xda-developers.com/galaxy-nexus/development/adb-fb-apx-driver-universal-naked-t1379875
Follow the instructions there for installing
The next step (if the driver would work for you) will be to flash a working PIT to your device to make sure you are using the correct partitions.
Afterwards we will flash the bootloader (may absolutely brick your device if not done correctly) and then --> if all goes fine --> you should be able to flash in download mode whatever you want to.
So it is still a long way to go and I need to check all the steps first before actually we can proceed.
That may take longer so do not expect that this will be something in the next days.. sorry.
Update:
If the above universal driver do NOT work for you: Test these one here View attachment apx_driver_samsung.zip
.

Thanks for the speedy reply Sir......Ill do as you said and let you know Sir......thank you.....thank you.....thank you Sir....

wooowwww......windows installed the drivers for the phone and it shows up as "NVIDIA usb boot-recovery for mobile devices." But when I open minimal adb and fastboot and type 'adb devices' the phone doesn't show up in the 'list of devices attached'....the line after 'list of devices attached' is just empty.....Also the phone doesnt show up in odin....what should I do next Sir?

alvcross said:
wooowwww......windows installed the drivers for the phone and it shows up as "NVIDIA usb boot-recovery for mobile devices." But when I open minimal adb and fastboot and type 'adb devices' the phone doesn't show up in the 'list of devices attached'....the line after 'list of devices attached' is just empty.....Also the phone doesnt show up in odin....what should I do next Sir?
Click to expand...
Click to collapse
nvidia apx isnt fastboot/adb device. You can found tool on nvidia site ( more info https://ac100.grandou.net/nvflash ), this tool can read and write whole flash.
Before you could use nvidia's tool, you must send an uniq blob to your phone. APX mode is useless without this blob.
This blob is uniq for every phone.