Hi all,
I tried to install a new Rom for my Orange UK M2000 but something went wrong and the computer told me that the version is not compatible but the device just showed 'USB' or 'Serial' on a dark screen and i couldn't do anything to it.
I tried to install another version...didn't work. I tried Hard Reset...nothing. I tried to leave it of the batteries for a while...nothing till now.
Could any one plaese HELP coz I doubt Orange can!!!
thnx....
Hi all i am new to all this i tried to load a newer rom on my Imate it had an error and froze did a reset and now it only comes to the 3 colour boot screen i have tried a hard reset but no luck and have downloaded the offical rom again i can get into the bootloader screen by pressing camera button and on and connect with the usb the thing is how do I load the rom the Program"RUU program" says u must have a active sync connection and it will not work in the bootloader it says usb in the left conner but active sync will not work is there any other program that doesnt use active sync to load the rom to my phone i have been reading the forum and seen similar problems all with the reply load wizardlove cant find the it all the links are broken or doesnt excest I need to get my phone running asap and if i send it in it will only be returned inn 6weeks they say I am from south africa and the guys here can be a lot of help coz the know nothing so if anybody can help me please it would be great thanks
Which is your device a G3 or G4 ? post the IPL/SPL...? of the phone to determine the version. As far as it gets to bootloaders (tricolor screen) you are safe,its just a bad flash,nothing to worry,you'll soon have it working fine.
Which rom were you trying to upgrade to ? and what exactly were you doing.First, is your phone SIM/CID unlocked,if you were trying to upgrade to a latest wm6 rom,its essential to have the phone CID unlocked
Secondly,while in bootloaders, Activesync doesn't work,you got to have a working OS on the phone to sync with activesync,but when in bootloaders and usb appears in the bottom of the screen,you can flash the rom.
Cheers!
K Jam hangs at blue screen
Hi to all,
I have a K jam more then 1 years old. Now It is giving some probem. There is no display but only light in the screen but I make call and recieve calls!.
First time when problem arised. I pressed 3 battons(2 left side and 1 up side)the screen will became perfect and when I remove the battery & reinserted, the problem arised again. When I asked some 2 to 3 mobile service mens, thay told that there is a problem with OS (By reinstalling the OS it will be repaired). I think probem is with the strip connect motherboard to the LCD, that could be cuted but service mens told no, it is problem with OS.
Where I can get the OS, WM5 is preinstalled in it.
Still it did not open the mobile. Please help me
Many Thanks for all
Srikanth.K
hellol i m facing the same problem when i start my imate k jam it does nt boot to windows n stopd on three color screen wht to do now help me plz to sort out
I feel your Pain! im in the same boat the three colour screen! all my Imate only gives
me IPL 2.16.0001 an SPL 2.16.0001 not even an OS
i downloaded wm6 from here and i followed some step of senior member of these site.now i have a problem.when i upgraded my mobile restart after booting and again restart so i am in serious problem.what can i do now.any help.
my imate k-jam ipl 1.01 and spl is 1.06
please help me
Hi
I have been trying to update my Orange M2000 (BA) without sucess. I am now only getting a blank screen. I am unable to get it to connect to active sync with my computer, and the only sign of life is a solid red light instead of the battery light.
Can anyone help this noob
Thanks
Hi....
I have non-responding brick. After a hard reset, fist stuck on splash screen(O2) and now it is just dead.
Not able to load boot loader, not able to hard reset it...not responding at all.
Left without battery more than 24 hours...still the same.
Battery voltage 4.35 V
Question is:
Is there a way to repair/reformat corrupted ROM installation (WM 6 official O2 UK) with some other cable or tool, because my PC is not recognizing device anymore?
Or repair center (new mobo) is the solution for my problem?
Thanks
Anyone?
possible solution
zikizile said:
Hi....
I have non-responding brick. After a hard reset, fist stuck on splash screen(O2) and now it is just dead.
Not able to load boot loader, not able to hard reset it...not responding at all.
Left without battery more than 24 hours...still the same.
Battery voltage 4.35 V
Question is:
Is there a way to repair/reformat corrupted ROM installation (WM 6 official O2 UK) with some other cable or tool, because my PC is not recognizing device anymore?
Or repair center (new mobo) is the solution for my problem?
Thanks
Click to expand...
Click to collapse
have you tried to re install from your sd card there is a thread on hear that tells you how to do it, it helped me out.
Yes I have..But, (don't ask me how) my sd card was broken (hairline crack on middle of the card) and while booting it got stuck on loading from sd card..
I think that it killed my phone.
How can I reload bootloader,since now it is not responding?
Thanks for advice..I almost lost all hope
My palm treo 750v AT&T gets stuck at the palm logo when starting. i have tried hard and soft reset to no avail. i have tried installing new ROM through SD ( something like cheeming.nbh). it displays loading.. for 2 seconds then goes back to Tri color. I dont have the USB cable do a hard SPL through active sync. Is there a way i can do a Hard SPL flash through SD? Is there a better Method to solve my problem? Please helf a Kenyan African boy . my phone is my greatest treasure
plese post links to files and procedures if necessary. Thanks