Related
Hi guys,
I did something very stupid and it seems I've bricked my arc for good
My Arc had unlocked bootloader and was on rooted 2.3.2. When the phone found firmware OTA update, I chose to download it, then the phone rebooted and started installing new firmware. After a minute or so, it turned off and that was the end, it's not possible to turn it on any more. The led won't even lit up. Is there anything I can do to revive it ?
Arrrgh, this exact same thing happened to me, I woke up and it said there was software update available (I have unlocked bootloader and rooted 2.3.2)
I blame still being mostly asleep on hitting ok. Now I have a brick!
Some more info.
I've tried pulling the battery and putting it back in, It still won't power on.
I've tried holding down menu and plugging it into USB to reflash it and the blue light doesn't come on.
Sorry to hear that, and many people have this problem: http://forum.xda-developers.com/showthread.php?t=1106250
Can't update firmaware through OTA after unlocking bootloader
Sorry to hear about your phone
I always turn of the "auto check for updates" thingy on android. Learned the hard way on my Desire when it got updated to Froyo over OTA and had to wait a while for root lol.
Anyway,SE provided the info to unlock the bootloader and that an OTA coming from them bricks the phone is kinda silly. Far as i know u can't update through SEUS (might be wrong) when it's unlocked and it would be a nice idea maybe to not be able to install the OTA update either.
Mano1982 said:
Sorry to hear that, and many people have this problem: http://forum.xda-developers.com/showthread.php?t=1106250
Can't update firmaware through OTA after unlocking bootloader
Click to expand...
Click to collapse
Jerpelea has posted an unbrick (softbrick) package, can anyone test if this can unbrick the device?
http://forum.xda-developers.com/showthread.php?t=1116970
magnumhex said:
Jerpelea has posted an unbrick (softbrick) package, can anyone test if this can unbrick the device?
http://forum.xda-developers.com/showthread.php?t=1116970
Click to expand...
Click to collapse
won't work if you can't get it into flash mode.
Can't you get it into Fastboot mode (give it a few hours charge..) then pull the battery for 30 seconds...
then hold the menu button while plugging the usb cable in... should (in theory) go into fastboot mode - then you can fastboot flash a fresh system.img
im_iceman said:
Can't you get it into Fastboot mode (give it a few hours charge..) then pull the battery for 30 seconds...
then hold the menu button while plugging the usb cable in... should (in theory) go into fastboot mode - then you can fastboot flash a fresh system.img
Click to expand...
Click to collapse
Tried - no help though. Any other ideas? Or just to go and buy a new one?
By the way, did the same thing: my Arc LT15i has/had unlocked bootloader, rooted 2.3.2 (first firmware) and is/was 3.0.A.2.181. While preparing to try to lock bootloader in order to use SEUS and upgrade firmware, I've connected the phone which asked me to check for the updates and found T-mobile update (approx. 40Mb). Asked to dowloand and an idiot pressed "OK". And now, everything is black - just as the mask of the phone is.
The green light just blinks when the "power on" button is pressed, or charger is plugged in.
Can't it be unbricked with flashtool?
Sent from my LT15i using Tapatalk
[UPDATE] to my previous post:
Steps I have done:
1. Charged the battery for 4-5 hours
2. Flashed my Arc using the manual for flashing by @Step666
3. The progress went well and at the end there was a message:
"INFO - Now unplug the device and power it on
INFO - Then go to application settings
INFO - turn on Unknown Sources and Debugging"
I have tried to turn on the phone. There was a small vibration as when you're turning on the phone (note: before flashing there was not even this vibration when pressing power on button), but the screen remains black.
Any ideas for next step(s)? Thanks for trying to help!
spngbby said:
[UPDATE] to my previous post:
Steps I have done:
1. Charged the battery for 4-5 hours
2. Flashed my Arc using the manual for flashing by @Step666
3. The progress went well and at the end there was a message:
"INFO - Now unplug the device and power it on
INFO - Then go to application settings
INFO - turn on Unknown Sources and Debugging"
I have tried to turn on the phone. There was a small vibration as when you're turning on the phone (note: before flashing there was not even this vibration when pressing power on button), but the screen remains black.
Any ideas for next step(s)? Thanks for trying to help!
Click to expand...
Click to collapse
Anyone found any solution??
Thanks
Try to repair it with pc companion. I had the same pb and this manip fix it.
Solved
lenathou972 said:
Try to repair it with pc companion. I had the same pb and this manip fix it.
Click to expand...
Click to collapse
This solved my bricked arc
sorry for spaces b/w link
talk. sonyericsson .com /thread/ 24813
How can you repair a bricked phone with pc companion? Dont u need the phone to be booted and running?
No, but it will need flash mode. Hold back button while plugging in usb to pc. If not recognized, use Wotan server.
Sent from my LT15a using xda premium
tenca1 said:
Anyone found any solution??
Thanks
Click to expand...
Click to collapse
Did you find a solution to this i got the exact same thing
djc
djc151084 said:
Did you find a solution to this i got the exact same thing
djc
Click to expand...
Click to collapse
Found the problem myself, after sliding up the little black test point cover, it interfered with the screen, so holding the top left corner tight enabled the screen, so shook the phone a bit and it's fine now, must have been wedged somewhere it shouldn't have been.
Djc
Sent from my CM9 ICS MB525
Ok after my sony ericsson xperia play did the software upgrade while on the charger, it will not boot back up!!
Not sure what happend, but when you press the power button, it only vibrates once but will not boot back up!
It just shows a black screen!!!!
I have sent it in to the shop and we are stuck as to how to get it on.
You can not even get into the boot loader screen!
Its been a week, and i don't know what the hell to do!!!
Some one please help!!!!
Does the power button light up green when you hold down the search button while plugging into a computer? If so, use flashtool to flash back to the stock firmware
Yes it dose, the tech guy and me have tried to do so, however the computer sees the device but dose not know what it is, however even when the files are finished it sitll dose not boot up!
jacklebott said:
Does the power button light up green when you hold down the search button while plugging into a computer? If so, use flashtool to flash back to the stock firmware
Click to expand...
Click to collapse
If it lights up green then you cant get into fastboot, it should light up blue, if im not mistaken!
Is your phone Rooted, with BL Unlocked, and do you have CWM Recovery? You said you can not get into Bootload screen? Did you mean Recovery? Try pushing volume down repeatedly while pressing the power button, continue hitting volume down till you see the recovery screen. If you can get into recovery just do a nandroid recovery/restore, provided you did a back up prior to your issue.
It dose not light up blue, but it dose not go into the recovery screen at all, in fact when you press the power button, gives a small vibrate and the screen is still black!
Also when you put it on the charger the LED light is green, really frustrated.
However, I am new at this, like I said only had the device for a day, and this happened after I did a software update, so I am not sure what a CWM means, kindly clarify, think of giving instructions not just to a newbie, but to some one that has no clue what is going on! LOL sorry man I really am new to all of this, I just want it to work, so kindly provide me with step by step instructions that you would give to a five year old child.
Hmm... that's interesting. A CWM is a custom recovery. Green light when plugged in means its charging. It sounds almost like your phones LCD is not receiving a signal anymore, if that's the case, seeing as you wouldn't see anything on the screen in order to even do a recovery, I don't see a lot of options here. If its brand new, then its under warranty, take it back and exchange it.
Sent from my R800x using XDA App
This has nothing to do with your LCD =|.
It's sony's stupid software bricking the xperia play for no valid reason ; happened to me as well.
Only fix is to download Sony Ericsson Update Service and keep on retrying the software update after it fails ; This is not the Sony Ericsson Pc Suite ; Also try removing the battery for 30 seconds after 6-8 retries on SEUS - happened to me a few times after the original occurence since i was trying to get back to complete stock.
Thanks for the input, I was lost on how to help out on this one! I thought it was only bricking the rooted unlocked phones.
XperianceIT
sent from my Xplay R800X, using XDA App!
Thanks, so I need to use the update app from Sony Ericsson?
I will try it, however would it work after I flashed it ?
I did a few times and it took the flash files, yet still wont boot up.
XperianceIT said:
If it lights up green then you cant get into fastboot, it should light up blue, if im not mistaken!
Is your phone Rooted, with BL Unlocked, and do you have CWM Recovery? You said you can not get into Bootload screen? Did you mean Recovery? Try pushing volume down repeatedly while pressing the power button, continue hitting volume down till you see the recovery screen. If you can get into recovery just do a nandroid recovery/restore, provided you did a back up prior to your issue.
Click to expand...
Click to collapse
I wasn't trying to get him to use fastboot (blue light), I was saying to go into flash mode (green light)
Its still not booting up and the pc is now saying it dose not recognise my device!!
What to do????
As long as you can get into flash mode(green light, when you connect to pc) you're ok, wel re trying on seus and eventually it will work
Edit- it can take around 10 retries in my experience
Sent from my R800i using XDA App
Nabeel_Nabs said:
As long as you can get into flash mode(green light, when you connect to pc) you're ok, wel re trying on seus and eventually it will work
Edit- it can take around 10 retries in my experience
Sent from my R800i using XDA App
Click to expand...
Click to collapse
What do you mean by flash mode????
How do I connect my device to the PC since the PC is saying that the USB device connected is not recognised?
djskittel said:
What do you mean by flash mode????
How do I connect my device to the PC since the PC is saying that the USB device connected is not recognised?
Click to expand...
Click to collapse
Connect it to your PC with USB, Then go to support Zone in Pc Companion then select Phone software update and click Repair and follow the instructions, it worked for me when pc companion decided to brick me...
EDIT: Or you could always Flash 2.3.4, tut here: http://forum.xda-developers.com/showthread.php?p=20151540 just follow the first two posts, I believe it will work if Flashmode is still working (The tut will tell you how to get into there)
correct me if I have said anything wrong, was in a rush.
djskittel said:
What do you mean by flash mode????
How do I connect my device to the PC since the PC is saying that the USB device connected is not recognised?
Click to expand...
Click to collapse
When you connect the phone to the pc does the led stay green, if it does that's called flash mode , keep.on tryimg seus to flash the phine, this is not included in pc companion and is separate software
Sent from my R800i using XDA App
This happened to me to, so you are saying I should use SEUS to update over and over until it works?
---------- Post added at 09:32 PM ---------- Previous post was at 09:27 PM ----------
Nabeel_Nabs said:
As long as you can get into flash mode(green light, when you connect to pc) you're ok, wel re trying on seus and eventually it will work
Edit- it can take around 10 retries in my experience
Sent from my R800i using XDA App
Click to expand...
Click to collapse
Should I do an update or the reset and update option in SEUS?
hi everyone,
im new here on the XPERIA PLAY section.(used to have an Xperia X1 that diedi recently).
i have the Xperia Play R800a(Rogers edition) with the bootloader locked(confirmed with the sony ericsson website). i was able to root with flashtool and install CWM 5.0. but i can't seem to use fastboot on windows 7 32 or 64bits. it says Waiting for device and my R800a always have the blue only 2 seconds and goes green immediatly after that in charging mode.what can i do tp fix this???
thx in advance for the help u guys have.(you all have a great community here)
frykillr said:
hi everyone,
im new here on the XPERIA PLAY section.(used to have an Xperia X1 that diedi recently).
i have the Xperia Play R800a(Rogers edition) with the bootloader locked(confirmed with the sony ericsson website). i was able to root with flashtool and install CWM 5.0. but i can't seem to use fastboot on windows 7 32 or 64bits. it says Waiting for device and my R800a always have the blue only 2 seconds and goes green immediatly after that in charging mode.what can i do tp fix this???
thx in advance for the help u guys have.(you all have a great community here)
Click to expand...
Click to collapse
How did u connect ur phone to the com? it should be off and hold search button while inserting the usb cable.
Fat_boy555 said:
How did u connect ur phone to the com? it should be off and hold search button while inserting the usb cable.
Click to expand...
Click to collapse
actually it is powering off your device first unplug it from pc then hold down BACK button not search button then while holding BACK button (first button on leftmost part of your Xplay) plug the usb cable to your phone. That should get you into fastboot and start flashing using flashtool or manual fastboot commands (using cmd).
anbu187 said:
actually it is powering off your device first unplug it from pc then hold down BACK button not search button then while holding BACK button (first button on leftmost part of your Xplay) plug the usb cable to your phone. That should get you into fastboot and start flashing using flashtool or manual fastboot commands (using cmd).
Click to expand...
Click to collapse
back button is for flashing an ftf file search button is used for fastboot
when i do the search button and then plug usb cable, lights turn blue for 3secs and switch to green and the charge logo appears after that.
Noob Guide for Flashing and Fastboot:
Step 1) Power your device off and Remove USB
Step 2) Hold Search for "Fastboot" and Back Button for Recovery mode Then Whilst Holding insert Usb Into Xperia.
Step 3) Now you have got into "Recovery or "Fastboot" have fun Flashing, Booting, etc
Xperia4life said:
Noob Guide for Flashing and Fastboot:
Step 1) Power your device off and Remove USB
Step 2) Hold Search for "Fastboot" and Back Button for Recovery mode Then Whilst Holding insert Usb Into Xperia.
Step 3) Now you have got into "Recovery or "Fastboot" have fun Flashing, Booting, etc
Click to expand...
Click to collapse
do i have to push on both buttons or just the Search button for fastboot?(if its search...like i said only get blue light for 3 sec after it stop nothing happen(waiting for device always stays there))
GO HERE:
http://forum.xda-developers.com/showthread.php?p=24445892#post24445892
erm, have you got the necessary drivers for fastboot?
fastboot is useless without an unlocked bootloader anyway, because most of the time you will be flashing kernel or system partitions which will give errors
edit: you can still hotboot kernels like binary's hotboot cwm images
How do you hotboot?
Sent from my R800a using xda premium
frykillr said:
How do you hotboot?
Sent from my R800a using xda premium
Click to expand...
Click to collapse
In fastboot, instead of saying "fastboot flash boot boot.img", you say "fastboot boot boot.img"
Did u install fastboot driver?
Sent from my Xperia Play using XDA
jacklebott said:
In fastboot, instead of saying "fastboot flash boot boot.img", you say "fastboot boot boot.img"
Click to expand...
Click to collapse
U only boot the img, it does not flash
Sent from my Xperia Play using XDA
Adb, s1 or the drivers of the google android sdk manager?? drivers?? Or i miss something?
Sent from my R800a using xda premium
frykillr said:
hi everyone,
im new here on the XPERIA PLAY section.(used to have an Xperia X1 that diedi recently).
i have the Xperia Play R800a(Rogers edition) with the bootloader locked(confirmed with the sony ericsson website). i was able to root with flashtool and install CWM 5.0. but i can't seem to use fastboot on windows 7 32 or 64bits. it says Waiting for device and my R800a always have the blue only 2 seconds and goes green immediatly after that in charging mode.what can i do tp fix this???
thx in advance for the help u guys have.(you all have a great community here)
Click to expand...
Click to collapse
After re-reaading this, i realised that ur bootloader is locked. U need a unlock bootloader, fastboot uses the bootloader to flash or something along that line. cant remember. my apoplogies.
I knew that, so anyway how can use custom firmware then,?
Sent from my R800a using xda premium
Ive been able to.switch to r800i but i still cant flash...what the hell is going on....
Sent from my R800i using xda premium
Fastboot does not work on sim unlocked phones with locked bootloaders. I have an r800a too. I suggest you contact Alejandrissimo and get your BL unlocked if you want to use fastboot. It's worth it and it's pretty easy.
Is it possible to use a custom rom with a locked bootloader??
Sent from my R800i using xda premium
A Rogers r800a doesn't have fastboot. The recovery you installed runs from the system partition instead of the kernel, and that blue light you saw was the recovery loading.
You can unlock your bootloader and enable fastboot using Omnius. Normally, it would cost money, but they have free credits for easter weekend right now.
Check this post.
http://forum.xda-developers.com/showpost.php?p=24534816&postcount=51
If you can't figure it out, I can help you through teamviewer.
and then afterwards, I can also help you through installing a ROM, since this thread seems a bit confused.
Hi
i've got a little Problem with my Sony Ericsson Xperia Play.
I can't get anymore into the fastboot or the flashmode.
if i press the back button while i plug in the usb cable the led on the top is green for about a half a second and then it boots the normal system. the same is with the search button. there the led is blue for half a second and then it boots normal.
i also tried to reboot into fastboot mode via ADB but then it only boots into the cwm recovery system.
so how can i fix this problem?
or is there a other way to flash a new kernel?
would be nice if you could help me.
and sorry for my bad english skills
try another cable, or another usb port on pc
I tried different USB ports. I even tried differend PC's
I only have one cable but i've ordered another one. But I don't think that the cable is the problem because moving files and using adb works with it.
Hi if you can get into cwm can you boot into fastboot from there? On doomlords kernel you can boot from there not sure about cwm:fingers-crossed:
nope. i searched it several times and there is no option to go to fastboot mode
To get into fastboot mode your bootloader needs to be unlocked. Fastboot mode is disabled on locked bootloaders. But you do have acces to flash mode.
aofMoh ADAMS
My bootloader is unlocked.
And some times ago i was able to flash new kernels.
Or is it possible that a new kernel relock the bootloader?
edit:
sorry for the strange title. i typed the captcha in the wrong text box xD
ChrisOboe said:
My bootloader is unlocked.
And some times ago i was able to flash new kernels.
Or is it possible that a new kernel relock the bootloader?
edit:
sorry for the strange title. i typed the captcha in the wrong text box xD
Click to expand...
Click to collapse
not that i know of unless the kernel was built to lock the device which i dont think it is so i think you OTA-bricked your device
I recently flashed CM9 to my phone, but now i want to move on to JB, but for some reason i can not get into flash mode to write a different FTF.
When i I try to get into flash mode, I power the device off, hold the back button, and insert the USB cable. The LED on top flickers green then the screen comes on the the charging screen.
The same happens when I try to use fastboot except blue light flickers.
I have tried diferent computers, cables and OS's im not sure what else to try.
Download flashtool and install the drivers for your phone then leave your phone and enable unknown sources and enable usb debugging then open flashtool then press flash icon and select fastboot mode then plug your phone in then select reboot into fastboot mode via adb
Sent from my R800i using xda app-developers app
FaiselW said:
Download flashtool and install the drivers for your phone then leave your phone and enable unknown sources and enable usb debugging then open flashtool then press flash icon and select fastboot mode then plug your phone in then select reboot into fastboot mode via adb
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
I ran the driver utility and even when I send reboot bootloader via adb, the LED only flickers blue for a moment, then it boots to CWM.
I didn't think the drivers on the computer would change if the phone goes into flash mode or not though.
Default Cant Get To FastBoot or Flash Mode
You would need to be in flashmode (green light) to install a stock FTF not fastboot mode has suggested above. Have you tried flashing another version of CM9 with your phone via cwm and then trying from there see if the problem is not your rom.If not it could be a driver issue.
tallman43 said:
You would need to be in flashmode (green light) to install a stock FTF not fastboot mode has suggested above. Have you tried flashing another version of CM9 with your phone via cwm and then trying from there see if the problem is not your rom.If not it could be a driver issue.
Click to expand...
Click to collapse
I know i need to be in flash mode, i just reinstalled cm9.1.0 and it still has the same problem. I dont know what to do. I have tried multiple cords, I have used ubuntu ,win7 and win8 with the drivers installed and reinstalled. Im worried that my phone is broken.
Ngong0 said:
I know i need to be in flash mode, i just reinstalled cm9.1.0 and it still has the same problem. I dont know what to do. I have tried multiple cords, I have used ubuntu ,win7 and win8 with the drivers installed and reinstalled. Im worried that my phone is broken.
Click to expand...
Click to collapse
(1) Have you installed other roms before your problem started did this only start after installing CM9
(2) Have you flashed any other kernels before CM9 or was CM9 your first rom/kernel flash
Noticed on your first post you wrote that you hold the back button then attached the usb did you do this when flashtool said or before, you need to connect the usb exactly when flashtool tells you to like below step 5
(1) How to flash a stock .ftf Rom
(2) load & place .ftf rom in Windows/flashtool/firmware folder
(3) Open flashtool press lightening icon press flashmode
(4) Select your .ftf you placed in flashtool /firmware folder earlier
(5) Wait! Flashtool will tell you to connect your phone!
(6) Press & hold back button while connecting phone to PC green light will come on.
(7) Wait while flashtool starts flashing your stock rom.When finished it will tell you to reboot
(8) Finished unplug switch your phone on done!
Sorry if you already do it like this but some people forget and connect the usb too early Also I would recommend downloading a different version of flashtool some people have managed to get there phone working by using a older version of flashtool:good:
tallman43 said:
(1) Have you installed other roms before your problem started did this only start after installing CM9
(2) Have you flashed any other kernels before CM9 or was CM9 your first rom/kernel flash
Noticed on your first post you wrote that you hold the back button then attached the usb did you do this when flashtool said or before, you need to connect the usb exactly when flashtool tells you to like below step 5
(1) How to flash a stock .ftf Rom
(2) load & place .ftf rom in Windows/flashtool/firmware folder
(3) Open flashtool press lightening icon press flashmode
(4) Select your .ftf you placed in flashtool /firmware folder earlier
(5) Wait! Flashtool will tell you to connect your phone!
(6) Press & hold back button while connecting phone to PC green light will come on.
(7) Wait while flashtool starts flashing your stock rom.When finished it will tell you to reboot
(8) Finished unplug switch your phone on done!
Sorry if you already do it like this but some people forget and connect the usb too early Also I would recommend downloading a different version of flashtool some people have managed to get there phone working by using a older version of flashtool:good:
Click to expand...
Click to collapse
(1) yes, i have installed several roms before CM9 and i was always able to enter flash mode.
(2)I have tried doom kernel and several other kernels as well
I have waited till flash tool prompts, but IIRC id didn't matter in the past, flashtool would see what mode it was in and proceed.
Thank you for the descriptive reply.
Did you try a older version of flashtool http://androxyde.github.io/index.html?1375894152000
tallman43 said:
Did you try a older version of flashtool http://androxyde.github.io/index.html?1375894152000
Click to expand...
Click to collapse
I just tried versions 7 and 8, it doesn't seem to help.
I feel like this is something wrong with my phone though, I remember the phone being able to go into fast boot and flash mode at any time, as long as the computer was on. It is really weird how it flashes the color on the LED.
Ngong0 said:
I just tried versions 7 and 8, it doesn't seem to help.
I feel like this is something wrong with my phone though, I remember the phone being able to go into fast boot and flash mode at any time, as long as the computer was on. It is really weird how it flashes the color on the LED.
Click to expand...
Click to collapse
I so this quote on another thread similar problem to yours this is what he did:
Quote: Funny thing though is that in order to get into either mode, I have to remove the battery while it is plugged in and then hold down the corresponding key while inserting the battery and the corresponding light will then light up. That seems to be the only way to get into the modes. And sometimes this does't work, but it seems to work more than not.
This guy did this to get into fastboot and flashmode worth a try?
tallman43 said:
I so this quote on another thread similar problem to yours this is what he did:
Quote: Funny thing though is that in order to get into either mode, I have to remove the battery while it is plugged in and then hold down the corresponding key while inserting the battery and the corresponding light will then light up. That seems to be the only way to get into the modes. And sometimes this does't work, but it seems to work more than not.
This guy did this to get into fastboot and flashmode worth a try?
Click to expand...
Click to collapse
no luck... The light only blinks then goes into charging mode...
Edit:Is there a test point or something that would force the phone into one of these modes?
Ngong0 said:
no luck... The light only blinks then goes into charging mode...
Edit:Is there a test point or something that would force the phone into one of these modes?
Click to expand...
Click to collapse
Sounds like TA damaged you could try this but it's a paid service http://octopusbox.com/eng/news/details/259....Or someone reading this thread might know a better way :fingers-crossed:
tallman43 said:
Sounds like TA damaged you could try this but it's a paid service http://octopusbox.com/eng/news/details/259....Or someone reading this thread might know a better way :fingers-crossed:
Click to expand...
Click to collapse
Im looking to possibly switch carriers and this will be just another push towards it. lol
tallman43 said:
Sounds like TA damaged you could try this but it's a paid service http://octopusbox.com/eng/news/details/259....Or someone reading this thread might know a better way :fingers-crossed:
Click to expand...
Click to collapse
I read this for another phone and it is a shot in the dark, but if the boot block were zeroed out, it forces it into fastboot. If this can possibly work, what block device is the boot partition?
I will not bee too disappointed if the phone is bricked.
Ngong0 said:
I read this for another phone and it is a shot in the dark, but if the boot block were zeroed out, it forces it into fastboot. If this can possibly work, what block device is the boot partition?
I will not bee too disappointed if the phone is bricked.
Click to expand...
Click to collapse
huh? can you say that again please.
Hi guys!
I have Sony Xperia Arc S.
Is it possible to put it in a Flashmode without a "Back" button? My BackButton is broken, I think it is a road-wire on the button's board.
BTW Fastboot mode working fine.