Tried to install a rooted Kernal using Odin, The first Kernal did not install (froze), so I pulled the battery, and succesfully installed a different one. Now the phone freezes at the Galaxy SII screen with the Yellow Triangle. Tried re-installing several other Kernals, but to no avail.
Was able to boot into CWM 5, clear the phone, and then install Starbright ROM, but phone still freezes at the splashscreen.
I have tried everything I know to do.
Anyone got any recommendations, or am I bricked?
You are no where near bricked. I don't have a link but search the development section for a complete Rom but in .tar format and flash it to your phone via odin. Or find a complete stock Rom in .zip form and flash it via cwm.
Sent from my SPH-D710 using XDA Premium App
http://forum.xda-developers.com/showthread.php?t=1282415 follow directions here..
Thanks....I tried that method before, and odin kept freezing up when trying map the pit file.
Tried several others also.
I switched to a different windows machine and usb cable and it worked.
Guess Odin is just finicky like that!
Thank you for both of your help.....Tremendously.
dont need a pit file just check the reboot option
Related
I have a major issue. I flashed a new rom but my phone got stuck in bootloop. I went into recovery and tried to flash my backup. When I went into recovery my usb storage was unmounted. So I figured I'd go into oden and flash a new kernal. When I did this I placed the file in the phone section not the pda section of oden. I realized this mistake after I started to flash and paniced and unplugged the usb. Now when I turn my phone on its stuck at a screen that says hook the phone up to kies and go into kies recovery. It will still let me get into download mode. Anyone know how to fix and what is all needed to fix, kernal, drivers etc....... Thanks
Have you tried this thread?
http://forum.xda-developers.com/showthread.php?t=1329950
Just Odin a stock Tom or any one of your choosing?
Odin back to stock eg30.tar file.
Sent from my SPH-D710 using XDA App
Hey guy,
I was using CleanROM for the longest time. I've actually been using it for so long I can't quite remember how I got the phone unlocked in the first place. I want to say I used a combination of the Note 2 Toolkit and CASUAL to get there. I've been trying to get back to stock and now I'm stuck at the Samsung Galaxy Note 2 boot screen. I can get into Download Mode but I can't access Recovery at all. I've been using Odin(Which is where I messed up at). Things I've tried so far:
All of these will say they pass, but when the phone reboots, it still gets stuck at the Samsung Galaxy Note 2 boot screen.
Tried flashing the VRALJ from stockroms.net
Tried flashing philz touch recovery
Tried flashing both stock firmwares from sammobile.com for the SCH-I605.
I'm currently at a loss as to what to do now.
Any help is much appreciated. Thank you.
UPDATE: Ok, now when I try with one of the stock firmwares Odin gets to where it says Nand Write Start!! and it fails. Fails when flashing the Philz Touch Recovery as well.
UPDATE 2: Tried a different version of Odin. This time using Odin v3.09 and tried the VRALJB stock rom, it got to flashing the recovery.img then went to sboot.bin and failed.
UPDATE 3: Ok, using Odin v3.09 flashed philz touch recovery with Nand Erase All selected and T Flash selected. It went through successfully and am now able to boot to recovery. Seems that I was just using the wrong version of Odin3...I think...I hope...lol
UPDATE 4: Ok, so that didn't work. I was able to get into the stock recovery. But was unable to boot into android itself. Figured it's because there was nothing on it, attempted to flash a stock rom, and it still failed at sboot.bin. Attempted to reflash philz touch recovery, still fails. I'll keep trying different things, but I'm running out of things to try until I hit that insane moment where I try everything again expecting different results.
UPDATE 5: Ok, so I'm blind...or somehow didn't come across this thread before. But it helped me to fix the issue...so yeah. Thread link: http://forum.xda-developers.com/showthread.php?t=2120726
Opt1kal said:
Hey guy,
I was using CleanROM for the longest time. I've actually been using it for so long I can't quite remember how I got the phone unlocked in the first place. I want to say I used a combination of the Note 2 Toolkit and CASUAL to get there. I've been trying to get back to stock and now I'm stuck at the Samsung Galaxy Note 2 boot screen. I can get into Download Mode but I can't access Recovery at all. I've been using Odin(Which is where I messed up at). Things I've tried so far:
All of these will say they pass, but when the phone reboots, it still gets stuck at the Samsung Galaxy Note 2 boot screen.
Tried flashing the VRALJ from stockroms.net
Tried flashing philz touch recovery
Tried flashing both stock firmwares from sammobile.com for the SCH-I605.
I'm currently at a loss as to what to do now.
Any help is much appreciated. Thank you.
UPDATE: Ok, now when I try with one of the stock firmwares Odin gets to where it says Nand Write Start!! and it fails. Fails when flashing the Philz Touch Recovery as well.
UPDATE 2: Tried a different version of Odin. This time using Odin v3.09 and tried the VRALJB stock rom, it got to flashing the recovery.img then went to sboot.bin and failed.
UPDATE 3: Ok, using Odin v3.09 flashed philz touch recovery with Nand Erase All selected and T Flash selected. It went through successfully and am now able to boot to recovery. Seems that I was just using the wrong version of Odin3...I think...I hope...lol
UPDATE 4: Ok, so that didn't work. I was able to get into the stock recovery. But was unable to boot into android itself. Figured it's because there was nothing on it, attempted to flash a stock rom, and it still failed at sboot.bin. Attempted to reflash philz touch recovery, still fails. I'll keep trying different things, but I'm running out of things to try until I hit that insane moment where I try everything again expecting different results.
UPDATE 5: Ok, so I'm blind...or somehow didn't come across this thread before. But it helped me to fix the issue...so yeah. Thread link: http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
#Foreveralone? Haha glad u fixed your issue. Would u mind adding solved to the thread title? Helps loads.
Smack that thanks button If I helped!
Always make a nandroid backup before trying anything risky.
I do respond to questions (most) via PM.
Sent from my fabulous N7105 powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. Quote my post for replies ASAP.
Irwenzhao said:
#Foreveralone? Haha glad u fixed your issue. Would u mind adding solved to the thread title? Helps loads.
Click to expand...
Click to collapse
Haha, right? Thank you and got that plugged into the title.
I went through the normal procedure of installing a new ROM, I wiped w/factory reset, got hit with a "status 7" error. I looked it up and it's apparently a problem with conflicting recovery manager files. That makes sense because I have CWM recovery and it asked me to install TWRP. I guess you can't have both?
I followed a tutorial explaining how to edit the userscript file to bypass the error and it seemed like it was going to install at first but I still got hit with it. Now my computer doesn't recognize my s3 (d2spr) so I have to put the files on an external microSD. I tried to restore from CWM but it wouldn't let me. I'm pretty new to this stuff so I'm not sure how to proceed from here.
Your best option is Odin back to stock and start over again.
Sent from my SPH-L710
Im having the same issue. Can someone please help. I tried flashing the stock sprint rom using ODIN but i'm also stuck in recovery boot loop. Would some one direct me where i can maybe find the correct .tar to flash with ODIN
this is the one i used: L710VPUCMK3_L710SPRCMK3_L710VPUCMK3_HOME
Thanks
Hello there, I was trying to update my Tab's firmware to 4.2.2 following the instructions listed on a website I can't link to because I'm a new member. I found it by googling "update sm-t210 to 2.4.4". It's on a website called techbeasts.
I was using CWM recovery 6.0.4.7. I installed the first file, listed at the bottom of the page, the "Kernel.zip file". It installed using CWM just fine, it's a small file only about 6MB. The second file I tried to install, the "T110 on T210/210R.zip" file failed. It gave me something about 5 out 4 expected args and didn't work.
After this my tablet would not boot, it would show the Samsung Galaxy Tab 3 (not the animation) and then go black.
Next I tried to reflash using the 4.1.2 firmware from SamMobile using ODIN. This failed on the modem.bin. After this I couldn't boot in in recovery mode or ODIN mode. All I get is the, "Firmware upgrade encountered an issue...". ODIN still recognizes my tablet.
So I'm stuck. I've spent all night googling to no avail. Any help would be appreciated.
So I managed to use ODIN to get CWM reworking. But I've hit another brick wall. Now that I've got something to work with anyone have any ideas?
jstephens89 said:
So I managed to use ODIN to get CWM reworking. But I've hit another brick wall. Now that I've got something to work with anyone have any ideas?
Click to expand...
Click to collapse
Install the latest CWM (6.0.4.8) and it you should be able to flash the rom correctly.
Thanks gr8note,
So I did what you suggested, I installed 6.0.4.9 and then lo and behold, the error went away! The ROM installed with no errors. One issue is the device no longer registers with adb, but fortunately the ROM was already on my device. The device is still discoverable with ODIN on my PC.
My new problem is now I can't get it to boot in to anything but recovery or ODIN. Even if I just use the power button it boots to recovery. I just got home from work and will be searching for a solution, but any more help would be appreciated!
Thanks again.
jstephens89 said:
Thanks gr8note,
So I did what you suggested, I installed 6.0.4.9 and then lo and behold, the error went away! The ROM installed with no errors. One issue is the device no longer registers with adb, but fortunately the ROM was already on my device. The device is still discoverable with ODIN on my PC.
My new problem is now I can't get it to boot in to anything but recovery or ODIN. Even if I just use the power button it boots to recovery. I just got home from work and will be searching for a solution, but any more help would be appreciated!
Thanks again.
Click to expand...
Click to collapse
Flash the kernel again.
Sent from my SCH-I605
Hi gr8nole, thank you for getting back to me. I've seen your name all over these forums searching for a solution.
So I have reflashed the kernel I had originally downloaded, and also tried the blackhawk kernel I found on these forums for the sm-t210. It still will only boot to recovery. I have flashed several different recoveries to my tablet. I have tried two different ROMs - one from the website I mentioned above and the stock ROM from SamMobile - and it still will only boot to recovery or ODIN.
If you had a different kernel in mind a link would be greatly appreciated. Beyond that, any other advice you can give me?
hey hey hey
jstephens89 said:
Hi gr8nole, thank you for getting back to me. I've seen your name all over these forums searching for a solution.
So I have reflashed the kernel I had originally downloaded, and also tried the blackhawk kernel I found on these forums for the sm-t210. It still will only boot to recovery. I have flashed several different recoveries to my tablet. I have tried two different ROMs - one from the website I mentioned above and the stock ROM from SamMobile - and it still will only boot to recovery or ODIN.
If you had a different kernel in mind a link would be greatly appreciated. Beyond that, any other advice you can give me?
Click to expand...
Click to collapse
j,
a while back i read a warning about sammobile images being screwy and to avoid them.
this was the image i used when i first got my tab http://d-h.st/users/Jamison904?fld_id=21912 the 1.13 gb img not the dump
hope this helps
m
Hey thanks for replying.
I ended up doing a huge facepalm when I figured out my problem. I was attempting to install the stock ROM like the other ROMs...through a recovery. You can imagine my frustration when I finally realized it was not a normal ZIP but instead had to be extracted and ODIN'D.
Duh.
I have a Samsung Galaxy S3 AT&T and for about a year and a half always wanted to root it but had no idea how. I had an iPhone a while back and used to jailbreak it I became an expert at it. Rooting is not so easy compared at least with the problems I've been experiencing
I started by watching hundreds of root videos and ended up rooting it with Odin and Kit Kat tar file im not sure of the specific file but I'm almost 100% it was my version 4.4.2 that I flashed.
After I did this I downloaded the basics and tried to get TWRP but gooManager wasnt working for some reason.
I tried to flash the Cyanongen 11 onto my phone using the installer for the comp and on google play store and it worked up until the end I got the dead droid symbol for a bit and it finished downloading to show the "ROM may flash stock recover on boot. Fix?" error message and I selected no and "Root Access Possibly Lost Fix?" I also selected no. My phone booted with no custom rom still rooted and most of my apps are unresponsive and close randomly except facebook and youtube.
I decided I wanted to return it to stock rom and try again but when I downloaded the stock tar file and tried to flash it I got this
I'm not sure what to do because I cant return it to stock rom, clockmod recovery has stopped working, and every video I watch about how to fix it is only making it worse.
If you have any idea what I can do or what I'm doing wrong let me know.
Odin failed because you cannot flash older firmware. Your best bet is to reflash recovery via Odin, then if you want stock go to enewman17's stock rom/system dump thread in development and flash the rom and factory reset.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
DocHoliday77 said:
Odin failed because you cannot flash older firmware. Your best bet is to reflash recovery via Odin, then if you want stock go to enewman17's stock rom/system dump thread in development and flash the rom and factory reset.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
I tried to flash cwm recovery onto my phone usb debugging selected and now odin doesnt even show that my phones recognized. This is so frustrating.
I suggest installing Philz Touch recovery via Odin and using Philz to flash a custom ROM to at least get your phone up and running.
devito35 said:
I tried to flash cwm recovery onto my phone usb debugging selected and now odin doesnt even show that my phones recognized. This is so frustrating.
Click to expand...
Click to collapse
If Kies is on your computer, remove it. Have you tried reinstalling drivers?
Sent from my SAMSUNG-SGH-I747 using Tapatalk