Can i update or apply the rom .zip of miui if my Defy is...
Android Version 2.2.2
Baseband Version : EPU93_U_00.59.01
BPflex Version: USAJRDNEMARAB1B8RTIT03A.OR
APflex version: GAS_EMEA_USAJRDNFRYORTIT_P015
Build Number: JOREM_U3_3.4.2_177-3
According to this guide: http://forum.xda-developers.com/showthread.php?t=1079150
You should flash the 2.2 Nordic rom first. There's a ton of guides on here how to flash sbf's.Then follow the guide from above.
Yes you can. It is suggested to flash Nordic(no difference but a deblur froyo) but you can flash MIUI over any stock Froyo 2.2.
Sent from my MB525 using Tapatalk
The thread told that 1.26.401.2 firmware is required to flash Android Revolution HD 1.2.1
but my phone is 1.26.708.2, then how can I flash the rom? Thanks.
Sorry for my bad english
terrycsw0117 said:
The thread told that 1.26.401.2 firmware is required to flash Android Revolution HD 1.2.1
but my phone is 1.26.708.2, then how can I flash the rom? Thanks.
Sorry for my bad english
Click to expand...
Click to collapse
You need to flash the Firmware that Mike has posted in the ARHD thread. This will bring to up the required version number and you can then flash the Rom afterwards.
Pretty sure it's the same firmware as the unbranded EU handset
Hi,
I have installed a Custom ROM (ICS) in my device and now i want to rollback to original OS (Android 2.3) from where can i download the original OS and the steps to rollback?
nsomaraj said:
Hi,
I have installed a Custom ROM (ICS) in my device and now i want to rollback to original OS (Android 2.3) from where can i download the original OS and the steps to rollback?
Click to expand...
Click to collapse
there is no finished ics, so u used cm9? also, this is the wrong section. anyway, here's a link
Ok guys, I have in my hand a Huawei ascend P6-U06 the rom version is B103. All I want is to install kitkat, but I'm not sure, all custom roms said that Imust be on Kitkat based rom first, so I must install a stock kitkat? I read that official kitkat fot P6-U06 is not ready. So, where can i start?
I see this thread to unlock bootloader http://forum.xda-developers.com/showthread.php?t=2666116
and this for TWPR for Kitkat http://forum.xda-developers.com/showthread.php?t=2632542
but notsure what kitkat based rom i need to install first.
Thanks in advance, I'm little confused
B506
lorddavid said:
Ok guys, I have in my hand a Huawei ascend P6-U06 the rom version is B103. All I want is to install kitkat, but I'm not sure, all custom roms said that Imust be on Kitkat based rom first, so I must install a stock kitkat? I read that official kitkat fot P6-U06 is not ready. So, where can i start?
I see this thread to unlock bootloader http://forum.xda-developers.com/showthread.php?t=2666116
and this for TWPR for Kitkat http://forum.xda-developers.com/showthread.php?t=2632542
but notsure what kitkat based rom i need to install first.
Thanks in advance, I'm little confused
Click to expand...
Click to collapse
The custom roms want the stock b506 firmware its chinese not international but it has english after u have b506 u can using adb commands install twrp and whit twrp a custom rom here is link for b506 and instructions: http://forum.xda-developers.com/showthread.php?t=2702054
lorddavid said:
Ok guys, I have in my hand a Huawei ascend P6-U06 the rom version is B103. All I want is to install kitkat, but I'm not sure, all custom roms said that Imust be on Kitkat based rom first, so I must install a stock kitkat? I read that official kitkat fot P6-U06 is not ready. So, where can i start?
I see this thread to unlock bootloader http://forum.xda-developers.com/showthread.php?t=2666116
and this for TWPR for Kitkat http://forum.xda-developers.com/showthread.php?t=2632542
but notsure what kitkat based rom i need to install first.
Thanks in advance, I'm little confused
Click to expand...
Click to collapse
B510 is the newest one, not B506.
Mairou44 said:
The custom roms want the stock b506 firmware its chinese not international but it has english after u have b506 u can using adb commands install twrp and whit twrp a custom rom here is link for b506 and instructions: http://forum.xda-developers.com/showthread.php?t=2702054
Click to expand...
Click to collapse
Ok, so I install that firmware, no problem is I have the P6-U06? and after that, unlock, flash twpr for kitkat and flash a rom. How about the 3G? It will work? (Im asking because I read that sometimes china has different 3G bands, so odont know if there will be some side effect using the chinesse rom)
BeyondTheHorizon said:
B510 is the newest one, not B506.
Click to expand...
Click to collapse
But if I want it only to install TWPR and custom rom, is ok to use B506?
And another question, if I want to return stock, just need to flash the official international rom? and i want to use this rom http://forum.xda-developers.com/showthread.php?t=2702483 or do you reccomend another one? (I know that the rom choose is more personal, but I just want an advice to start, and the language i can install spanish with MoreLocal I think)
lorddavid said:
Ok, so I install that firmware, no problem is I have the P6-U06? and after that, unlock, flash twpr for kitkat and flash a rom. How about the 3G? It will work? (Im asking because I read that sometimes china has different 3G bands, so odont know if there will be some side effect using the chinesse rom)
But if I want it only to install TWPR and custom rom, is ok to use B506?
And another question, if I want to return stock, just need to flash the official international rom? and i want to use this rom http://forum.xda-developers.com/showthread.php?t=2702483 or do you reccomend another one? (I know that the rom choose is more personal, but I just want an advice to start, and the language i can install spanish with MoreLocal I think)
Click to expand...
Click to collapse
B506 was what i used and worked well and you dont need to unlock the bootloader its already unlocked thats why you want b506. I dont know exactly how downgrading works never done it. I went trough hyd52rom v7 and v3 but i ended up flashing omni and still using it and 3g works for me (I live in Finland).
Mairou44 said:
B506 was what i used and worked well and you dont need to unlock the bootloader its already unlocked thats why you want b506. I dont know exactly how downgrading works never done it. I went trough hyd52rom v7 and v3 but i ended up flashing omni and still using it and 3g works for me (I live in Finland).
Click to expand...
Click to collapse
thanks a lot, i was downloading the international firmware haha, I will put that download (B506) today, my internet is so slow. I will do it friday on night better with patience (because the work, I want to do this slow with patience ) thanks a lot again
PD: http://forum.xda-developers.com/showthread.php?t=2686544 this is the rom that you are using right? I will try it first
Im using this rom: http://forum.xda-developers.com/showthread.php?t=2673839
hi guys
after hearing about anti rollback i have a doubt regarding flashing roms.
1. could i flash any rom on miui 10 after boot loader unlock?
or
2. i have to flash only miui based rom or oreo based rom?
or
3.i could flash any oreo or above version i.e. pie based rom?
You can flash any custom ROM but don't flash any firmware (don't flash firmware)
ok thnx alot bro
is there any rom which need flashing firmware prior installing?
aliasgertaj said:
ok thnx alot bro
is there any rom which need flashing firmware prior installing?
Click to expand...
Click to collapse
All ROM required you to flash firmware, since you are already using latest MIUI ROM you don't have to flash any firmware
Flashing older firmware file will brick your device so it's better to avoid flashing any firmware file
thnx alot bro for explaining
SunilSuni said:
You can flash any custom ROM but don't flash any firmware (don't flash firmware)
Click to expand...
Click to collapse
what is difference bwn ROM & FIRMWARE