Ok guys, I have in my hand a Huawei ascend P6-U06 the rom version is B103. All I want is to install kitkat, but I'm not sure, all custom roms said that Imust be on Kitkat based rom first, so I must install a stock kitkat? I read that official kitkat fot P6-U06 is not ready. So, where can i start?
I see this thread to unlock bootloader http://forum.xda-developers.com/showthread.php?t=2666116
and this for TWPR for Kitkat http://forum.xda-developers.com/showthread.php?t=2632542
but notsure what kitkat based rom i need to install first.
Thanks in advance, I'm little confused
B506
lorddavid said:
Ok guys, I have in my hand a Huawei ascend P6-U06 the rom version is B103. All I want is to install kitkat, but I'm not sure, all custom roms said that Imust be on Kitkat based rom first, so I must install a stock kitkat? I read that official kitkat fot P6-U06 is not ready. So, where can i start?
I see this thread to unlock bootloader http://forum.xda-developers.com/showthread.php?t=2666116
and this for TWPR for Kitkat http://forum.xda-developers.com/showthread.php?t=2632542
but notsure what kitkat based rom i need to install first.
Thanks in advance, I'm little confused
Click to expand...
Click to collapse
The custom roms want the stock b506 firmware its chinese not international but it has english after u have b506 u can using adb commands install twrp and whit twrp a custom rom here is link for b506 and instructions: http://forum.xda-developers.com/showthread.php?t=2702054
lorddavid said:
Ok guys, I have in my hand a Huawei ascend P6-U06 the rom version is B103. All I want is to install kitkat, but I'm not sure, all custom roms said that Imust be on Kitkat based rom first, so I must install a stock kitkat? I read that official kitkat fot P6-U06 is not ready. So, where can i start?
I see this thread to unlock bootloader http://forum.xda-developers.com/showthread.php?t=2666116
and this for TWPR for Kitkat http://forum.xda-developers.com/showthread.php?t=2632542
but notsure what kitkat based rom i need to install first.
Thanks in advance, I'm little confused
Click to expand...
Click to collapse
B510 is the newest one, not B506.
Mairou44 said:
The custom roms want the stock b506 firmware its chinese not international but it has english after u have b506 u can using adb commands install twrp and whit twrp a custom rom here is link for b506 and instructions: http://forum.xda-developers.com/showthread.php?t=2702054
Click to expand...
Click to collapse
Ok, so I install that firmware, no problem is I have the P6-U06? and after that, unlock, flash twpr for kitkat and flash a rom. How about the 3G? It will work? (Im asking because I read that sometimes china has different 3G bands, so odont know if there will be some side effect using the chinesse rom)
BeyondTheHorizon said:
B510 is the newest one, not B506.
Click to expand...
Click to collapse
But if I want it only to install TWPR and custom rom, is ok to use B506?
And another question, if I want to return stock, just need to flash the official international rom? and i want to use this rom http://forum.xda-developers.com/showthread.php?t=2702483 or do you reccomend another one? (I know that the rom choose is more personal, but I just want an advice to start, and the language i can install spanish with MoreLocal I think)
lorddavid said:
Ok, so I install that firmware, no problem is I have the P6-U06? and after that, unlock, flash twpr for kitkat and flash a rom. How about the 3G? It will work? (Im asking because I read that sometimes china has different 3G bands, so odont know if there will be some side effect using the chinesse rom)
But if I want it only to install TWPR and custom rom, is ok to use B506?
And another question, if I want to return stock, just need to flash the official international rom? and i want to use this rom http://forum.xda-developers.com/showthread.php?t=2702483 or do you reccomend another one? (I know that the rom choose is more personal, but I just want an advice to start, and the language i can install spanish with MoreLocal I think)
Click to expand...
Click to collapse
B506 was what i used and worked well and you dont need to unlock the bootloader its already unlocked thats why you want b506. I dont know exactly how downgrading works never done it. I went trough hyd52rom v7 and v3 but i ended up flashing omni and still using it and 3g works for me (I live in Finland).
Mairou44 said:
B506 was what i used and worked well and you dont need to unlock the bootloader its already unlocked thats why you want b506. I dont know exactly how downgrading works never done it. I went trough hyd52rom v7 and v3 but i ended up flashing omni and still using it and 3g works for me (I live in Finland).
Click to expand...
Click to collapse
thanks a lot, i was downloading the international firmware haha, I will put that download (B506) today, my internet is so slow. I will do it friday on night better with patience (because the work, I want to do this slow with patience ) thanks a lot again
PD: http://forum.xda-developers.com/showthread.php?t=2686544 this is the rom that you are using right? I will try it first
Im using this rom: http://forum.xda-developers.com/showthread.php?t=2673839
Related
Hi! i would like to know if there's any safe way to know which rom and process fits my Ascend P6-u06 without broken it, block local bands or end up with everything in Chinese? i'm from Costa Rica and i bought the phone here. I'll appreciate any help!!!! pls!!!!
Also what are the best roms for this smartphone....
Android Version
4.2.2
baseband version
IMC1202_201305151204_PENTA
Kernel Version
3.0.8-00741.gb849637
Build
P6-U06V100R001C00B103
CUSTOM VERSION
CUSTC527D103
Thot95 said:
Hi! i would like to know if there's any safe way to know which rom and process fits my Ascend P6-u06 without broken it, block local bands or end up with everything in Chinese? i'm from Costa Rica and i bought the phone here. I'll appreciate any help!!!! pls!!!!
Also what are the best roms for this smartphone....
Android Version
4.2.2
baseband version
IMC1202_201305151204_PENTA
Kernel Version
3.0.8-00741.gb849637
Build
P6-U06V100R001C00B103
CUSTOM VERSION
CUSTC527D103
Click to expand...
Click to collapse
Chinese firmwares B116 to B120, have a bricking problems. International versions work fine.
Dont know if your B103 rom is region modified. But latest international firmware and best stable one is B125. You can get download link from here: http://forum.xda-developers.com/showthread.php?t=2566453
There are custom roms and beta KK. But better to first get a hang of B125.
warea said:
Dont know if your B103 rom is region modified. But latest international firmware and best stable one is B125. You can get download link from here: http://forum.xda-developers.com/showthread.php?t=2566453
There are custom roms and beta KK. But better to first get a hang of B125.
Click to expand...
Click to collapse
No, since it doesn't have any band block. My fear is to install (for example) B125 and end up with my phone bricked or in chinese. I saw they have available the firmeware in their website, so if something goes wrong i can roll it back to factory software? or there's any possibility of end up with a bricked phone?
i'm thinking on upgrade it to B125 and after that, install HYD52ROM V7
PS: my knowledge about this is not to good yet, that's why I'm so insecure about it
By the way the common bands used by the phones and modems here are HSPA/UMTS 850/2100Mhz Edge/GPRS/GSM 850/900/1800/1900Mhz
Thot95 said:
No, since it doesn't have any band block. My fear is to install (for example) B125 and end up with my phone bricked or in chinese. I saw they have available the firmeware in their website, so if something goes wrong i can roll it back to factory software? or there's any possibility of end up with a bricked phone?
i'm thinking on upgrade it to B125 and after that, install HYD52ROM V7
PS: my knowledge about this is not to good yet, that's why I'm so insecure about it
By the way the common bands used by the phones and modems here are HSPA/UMTS 850/2100Mhz Edge/GPRS/GSM 850/900/1800/1900Mhz
Click to expand...
Click to collapse
International firmware versions are safe. No worries.
To install custom roms you would have to read up on installing custom recoveries and so on.
But anyway go for B125 for now. Its easy and safe :good: We might see an official Kitkat update soon. :good:
CN118 to start with....
Got this amazing phone from Claro CR, so far I have installed CN118 Chinese version and TWRP recovery.
I had flash LightningKat and HYD52ROM for testing, both real nice and stable, currently running LightningKat KK version and waiting for stable version of CM11 to try on.
This is an amazing piece of device, in order to avoid bricks, just read read and read before try.
Hi!
I want to install this rom on my Huawei Ascend P6. Now i have installed OMNI Rom 4.4.4. Soo i must have a B508 official firmware, but i dont know how to install, because i dont know how to use dload (i hope that you understand what i mean).
The next question is what is the MIUI Patchrom Project and how to use it ?
When i install the B508 i just flash MIUI V5 with TWRP recovery ?
dedke said:
Hi!
I want to install this rom on my Huawei Ascend P6. Now i have installed OMNI Rom 4.4.4. Soo i must have a B508 official firmware, but i dont know how to install, because i dont know how to use dload (i hope that you understand what i mean).
The next question is what is the MIUI Patchrom Project and how to use it ?
When i install the B508 i just flash MIUI V5 with TWRP recovery ?
Click to expand...
Click to collapse
Don't need to go under B508 your bootloader is already unlocked with OmniRom and you are already under kitkat too don't forget to fullwipe before flashing Miui. You can install it with TWRP.
If you want to follow the instruction: install Official KitKat firmware (like B513 through twrp) then official Kitkat recovery with adb then B508 through dload method. Then install CWM and follow the instructions
Miui patchroom project is the way to port miui. How to use it : Don't know try to search a tuto on en.miui.com or google
Good Luck
320
Skyllery said:
Don't need to go under B508 your bootloader is already unlocked with OmniRom and you are already under kitkat too don't forget to fullwipe before flashing Miui. You can install it with TWRP.
If you want to follow the instruction: install Official KitKat firmware (like B513 through twrp) then official Kitkat recovery with adb then B508 through dload method. Then install CWM and follow the instructions
Miui patchroom project is the way to port miui. How to use it : Don't know try to search a tuto on en.miui.com or google
Good Luck
Click to expand...
Click to collapse
Thanks !!! )
Hello. I Mehmet from Turkey I 'm using the HTC one m8 , I installed 5.0.2 custom ROM on all but the wifi did not run it on the forum , I need your help , WiFi work for what I should do ? Help me ..
adanali1 said:
Hello. I Mehmet from Turkey I 'm using the HTC one m8 , I installed 5.0.2 custom ROM on all but the wifi did not run it on the forum , I need your help , WiFi work for what I should do ? Help me ..
Click to expand...
Click to collapse
what firmware do you have ?
John3:16Godislove said:
what firmware do you have ?
Click to expand...
Click to collapse
Sdragon lollipop 5.0.2 Sense 7.
Viperone lollipop
Android rev. Lollipop
Maximus hd rom
Ledroid rom.
All Custom frimware Wi- fi does not open.
adanali1 said:
Sdragon lollipop 5.0.2 Sense 7.
Viperone lollipop
Android rev. Lollipop
Maximus hd rom
Ledroid rom.
All Custom frimware Wi- fi does not open.
Click to expand...
Click to collapse
Usually the WI-FI problem happens when you dont have the proper base build which is 4.16.xxx something that can be found on your phone, youll need to get an OTA update from your carrier in order to be able to enjoy ROMS that have a different base
John3:16Godislove said:
Usually the WI-FI problem happens when you dont have the proper base build which is 4.16.xxx something that can be found on your phone, youll need to get an OTA update from your carrier in order to be able to enjoy ROMS that have a different base
Click to expand...
Click to collapse
Thank you for your attention, I can ota update , twrp recovery is opened ? How to delete Twrp ? How can I get repeats have ota update
adanali1 said:
Thank you for your attention, I can ota update , twrp recovery is opened ? How to delete Twrp ? How can I get repeats have ota update
Click to expand...
Click to collapse
Custom recoverys cant process OTA updates, so you will need a stock reocvery or to download the OTA zip file that corresponds to you and then you will be able to update via the RUU
Hello all,
First, sorry for my bad english.
I have a lg g3 rooted with custom kernel 777 and lion 5.5 rom installed.
All i want is to return to stock kernel and stock rom.
Can someone help me please?
uriel33 said:
Hello all,
First, sorry for my bad english.
I have a lg g3 rooted with custom kernel 777 and lion 5.5 rom installed.
All i want is to return to stock kernel and stock rom.
Can someone help me please?
Click to expand...
Click to collapse
http://lgg3root.com/lg-g3-stock-roms/
or newer stock versions:
http://forum.xda-developers.com/showthread.php?t=2961073
Maybe you will be happy with cloudy rom for lg g3 (pure stock, with lg g4 features…)
Gesendet von meinem LG-D855 mit Tapatalk
Thanks,
Can i flash directly from twrp the 20w stock rom considering that i have a custom kernel and a custom rom lollipop installed?
If you want to return the stock rom (not cloudy one, stock g3) you cant flash it from twrp but if you want to use the cloudyg3 rom, you can flash it from twrp but you also need to do wipe from twrp
Sent from my iPad using Tapatalk
uriel33 said:
Thanks,
Can i flash directly from twrp the 20w stock rom considering that i have a custom kernel and a custom rom lollipop installed?
Click to expand...
Click to collapse
Yes you can flash 20w from this thread: http://forum.xda-developers.com/lg-g3/development/stock-t2961073
directly from twrp even with custom kernel.
That zip comes with its own kernel. Ofc you still need to wipe cache and data.
Don't mind what the guy above said, it seems he didn't even read prevoius post.
And just so you know the ROM above is rooted as well. If you wish complete unroot as well go restore via kdz or unroot with SuperSU.
Hello, I would like to install custom ROM on my P6.
So I have TIM Huawei P6 with B110 JB ,I already rooted it and installed TWRP.
Can I just install to install http://forum.xda-developers.com/showthread.php?t=2630208 ?
Or I should first flash B118CN ? And does it will cause any trouble , because I have TIM(carrier) custom B110 firmware right now?
You'd probably be better off on the p6 forum, this is the Mate 1 forum.