Related
So I bought a car usb charger that claimed it was rated at 1 amp. Using both my blackberry and HTC oem usb cables it will only show up as a USB charger (500ma).
This is not exactly enough to charge the phone while using 3g, gps, full screen brightness, etc. I'm looking for a good confirmed 1 amp hardwire (not using a usb cable) car charger and home charger. I used my sisters Samsung charger (rated at 700ma) and it charged it quicker than with the OEM htc charger.
And I would like to try and get ones that are confirmed to show up as fully charging the phone. I would appreciate some insight
Sent from my PC36100 using XDA App
And now that I think about it,
I would like to be able to use my Amazon prime for a change, so amazon links would be nice
Sent from my PC36100 using XDA App
I went through a few different car chargers, so I can help you out here. I bought the Belkin car charger recommended here in another thread, low profile and rated at 1A, but my phone only recognized it as USB and charging was fairly slow, extended road trips using video recording and navigation while plugged in would drain my battery over time.
I used my friend's palm pre home charger and it worked very well, so I went on to Amazon and bought the "palm vehicle charger". The one I got in the mail (from Park Deals) was DOA, wouldn't turn on at all (I emailed Park Deals and they sent me a new replacement free of charge, didn't even have me ship back the defective one). I called the local radio shacks and found one in stock at $9.99 (radio shack isn't carrying palm anymore, so the accessories are on closeout but hard to find in stock). Works like a charm, the phone recognizes as AC charging, the phone still charges while running navi or recording video.
My friend got a cheapo car kit on ebay, came with rubberized case, mount that fits the evo with the same case on, and a cheap unlabeled car charger with a bungie type cord. I tried this on my phone, my evo recognizes it as AC also, so I assume it would charge well if it's rated at 1A. I've seen several other cheapo car chargers rated at 1A as well.
Another thread here on XDA says that if you modify your charger/cable by altering the middle data pins you can get the phone to believe the usb port is plugged into the wall and draw full current from the charger. I tried covering the two middle pins with a piece of paper and plugging it in, but this didn't work for me. The other methods involved shorting the two data pins together, I didn't really want to waste a cable or mess up a charger and potentially my phone so I just bought a different charger. Another thread mentioned buying a specific rocketfish usb cable had a similar effect.
nhutpham said:
I went through a few different car chargers, so I can help you out here. I bought the Belkin car charger recommended here in another thread, low profile and rated at 1A, but my phone only recognized it as USB and charging was fairly slow, extended road trips using video recording and navigation while plugged in would drain my battery over time.
I used my friend's palm pre home charger and it worked very well, so I went on to Amazon and bought the "palm vehicle charger". The one I got in the mail (from Park Deals) was DOA, wouldn't turn on at all (I emailed Park Deals and they sent me a new replacement free of charge, didn't even have me ship back the defective one). I called the local radio shacks and found one in stock at $9.99 (radio shack isn't carrying palm anymore, so the accessories are on closeout but hard to find in stock). Works like a charm, the phone recognizes as AC charging, the phone still charges while running navi or recording video.
My friend got a cheapo car kit on ebay, came with rubberized case, mount that fits the evo with the same case on, and a cheap unlabeled car charger with a bungie type cord. I tried this on my phone, my evo recognizes it as AC also, so I assume it would charge well if it's rated at 1A. I've seen several other cheapo car chargers rated at 1A as well.
Another thread here on XDA says that if you modify your charger/cable by altering the middle data pins you can get the phone to believe the usb port is plugged into the wall and draw full current from the charger. I tried covering the two middle pins with a piece of paper and plugging it in, but this didn't work for me. The other methods involved shorting the two data pins together, I didn't really want to waste a cable or mess up a charger and potentially my phone so I just bought a different charger. Another thread mentioned buying a specific rocketfish usb cable had a similar effect.
Click to expand...
Click to collapse
That was me on both accounts. Love my rocket fish cable. Bought the 12v/usb converter for the car and whether or not i use the pc or car to charge, it shows as ac charger on the phone. I use this cable on all my pc's as well as the usb outlet in my vehicle.
This is the charger that I bought from amazon. It shows up as charging from AC (instead of USB) charging. It's available for Amazon Prime for under $6:
The Motorola P513 micro-usb charger.
Ok so I ended up with the Moto 513 charger as well (950ma rated)
http://www.amazon.com/Motorola-Vehi..._1_5?ie=UTF8&s=wireless&qid=1280759739&sr=8-5
But I cant find any AC chargers under prime that are 1000ma
investinwaffles said:
Ok so I ended up with the Moto 513 charger as well (950ma rated)
http://www.amazon.com/Motorola-Vehi..._1_5?ie=UTF8&s=wireless&qid=1280759739&sr=8-5
But I cant find any AC chargers under prime that are 1000ma
Click to expand...
Click to collapse
this one works great. I have it.
Ok, so I found an OEM Nokia for the N97 that is rated at 1200ma. Is this safe to buy for my phone?
http://www.amazon.com/Nokia-Origina..._1_2?ie=UTF8&s=wireless&qid=1280760676&sr=8-2
Auction with more specifics of the charger:
http://cgi.ebay.com/NOKIA-US-AC-10U...ccessories&hash=item414e190fa7#ht_2800wt_1026
There's a nokia micro usb charger for $6.99 available for Amaazon Prime. The model number is AC 6U. ASIN: B0030T0ULW
I'm charging with the scosche reviveII at 2.1 amps without any problems.
linhpham2 said:
There's a nokia micro usb charger for $6.99 available for Amaazon Prime. The model number is AC 6U. ASIN: B0030T0ULW
Click to expand...
Click to collapse
From this ebay listing it looks like the AC-6U is only a ~600ma charger:
http://cgi.ebay.com/NOKIA-CELL-PHON..._Accessories&hash=item5639f88b1c#ht_500wt_721
I think ill spend the extra few bucks on the 1200ma charger, I don't think ill have any problems (and i have the best buy warranty also so I'm not too worried).
linhpham2 said:
I'm charging with the scosche reviveII at 2.1 amps without any problems.
Click to expand...
Click to collapse
How fast does it charge?
One the 2.1 amp port, the Evo only charges at 1 amp. The Evo doesn't charge any faster with this charger than any other 1 amp charger.
linhpham2 said:
One the 2.1 amp port, the Evo only charges at 1 amp. The Evo doesn't charge any faster with this charger than any other 1 amp charger.
Click to expand...
Click to collapse
Gotcha, thanks for the info.
I just ordered a Rocketfish cable. We'll see how that works.
Would be nice if they made a Y-cable to get 1amp from 2 USB ports in a PC. I mean, I know they MAKE cables like this but I read somewhere that HTC phones were designed to still only charge at 500mAh even with one of those.
Dunno.
It depends on what you're using as a charging source. When usb charging on my home pc or car, it's AC charging at 1 amp.. But if I'm charging with my Energizer external battery, it's only USB charging at 0.5 amp. This is using the same usb cable.
iGo
Would anyone happen to know what an iGo tip (A97) delivers? I am trying to rig up a custom solution that is hard-wired, but uses iGo tips so I don't have to use the cigarette lighter plug and I have the flexibility at the corner of my windshield to swap tips for different devices.
Right now, I have a 4-port USB hub installed under the dash that is 12v powered. I then use a proprietary iGo cable that uses a standard PC style USB connector on one end and then terminates into an iGo tip connector at the other end. That USB cable runs up to the corner of the windshield so I can swap tips at will.
If I use the iGo A97 tip on their cigarette lighter adapter, it seems to charge, but I am not sure at what rate. If I try to use the A97 tip on the USB hub, it charges for about 2 seconds, and then the light goes out. The Evo does not seem to like the custom arrangement, yet all my other micro usb devices do not seem to have any issues and charge just fine...
Thanks,
-Rob
I can attest to the Moto 513 working fine - it has served me very well on my Evo and the Treo Pro before it.
Unfortunately it is a big ass charger though - wish there was a good micro option.
How do u determine how much power its actually charging at or if its not using the full 1amp rating?
_______________________________
Sent from my EVO 4G
robroy90 said:
Would anyone happen to know what an iGo tip (A97) delivers? I am trying to rig up a custom solution that is hard-wired, but uses iGo tips so I don't have to use the cigarette lighter plug and I have the flexibility at the corner of my windshield to swap tips for different devices.
Right now, I have a 4-port USB hub installed under the dash that is 12v powered. I then use a proprietary iGo cable that uses a standard PC style USB connector on one end and then terminates into an iGo tip connector at the other end. That USB cable runs up to the corner of the windshield so I can swap tips at will.
If I use the iGo A97 tip on their cigarette lighter adapter, it seems to charge, but I am not sure at what rate. If I try to use the A97 tip on the USB hub, it charges for about 2 seconds, and then the light goes out. The Evo does not seem to like the custom arrangement, yet all my other micro usb devices do not seem to have any issues and charge just fine...
Thanks,
-Rob
Click to expand...
Click to collapse
Should pull 1A off the Igo
how do i determine if its recognizing a charger as ac versus usb? could this be rom specific? it seems to charge much faster with cyanogen than it did with damagecontrol
I have been on the hunt for a charger for my car and home that shows up as an AC charger so that I can get a faster charge. After a bit of tinkering I have found that all you need to do to get ANY charger to show up as a AC charger is to have 5V on the standard USB + & - leads and simply connect the two data wires together. This will tell the phone that this is an AC adaptor.
I actually bought a cheapo 1A USB car charger from DealExtreme and it was supposed to show up as an AC adaptor but it didn't. So I carefully opened it up and de-soldered the resistors that were connected to the data pins on the PCB and verified that there were no more connections going to the two data pins on the USB connector (the two middle pins) and then put a small dab of solder across them. I plugged my MonoPrice USB cable into it and went to my car. Lo and behold it shows up as an AC adaptor AND actually charges at the full 1 AMP capacity!
Just wanted to share this with you guys. If people want to send me their chargers I would be happy to mod them for you (just pay shipping). I was also thinking about picking up a bunch of the USB 1A car chargers from DealExtreme, modding them, and then re-selling them. Would anyone be interested?
houseofbugs said:
I have been on the hunt for a charger for my car and home that shows up as an AC charger so that I can get a faster charge. After a bit of tinkering I have found that all you need to do to get ANY charger to show up as a AC charger is to have 5V on the standard USB + & - leads and simply connect the two data wires together. This will tell the phone that this is an AC adaptor.
I actually bought a cheapo 1A USB car charger from DealExtreme and it was supposed to show up as an AC adaptor but it didn't. So I carefully opened it up and de-soldered the resistors that were connected to the data pins on the PCB and verified that there were no more connections going to the two data pins on the USB connector (the two middle pins) and then put a small dab of solder across them. I plugged my MonoPrice USB cable into it and went to my car. Lo and behold it shows up as an AC adaptor AND actually charges at the full 1 AMP capacity!
Just wanted to share this with you guys. If people want to send me their chargers I would be happy to mod them for you (just pay shipping). I was also thinking about picking up a bunch of the USB 1A car chargers from DealExtreme, modding them, and then re-selling them. Would anyone be interested?
Click to expand...
Click to collapse
Thanks for the post! I just wanted to add to it a link which includes some more information about performing this "mod." I haven't done mine yet, but I intend to soon.
http://forum.xda-developers.com/showthread.php?t=767961
Sb22 said:
Thanks for the post! I just wanted to add to it a link which includes some more information about performing this "mod." I haven't done mine yet, but I intend to soon.
http://forum.xda-developers.com/showthread.php?t=767961
Click to expand...
Click to collapse
Thanks for that link! I didn't know if anyone else tried this yet. But I can verify that it works perfectly! The best part is that my car charger looks stock as I used 2-part epoxy to glue it back together.
i have said it before and i will say it agai , fast full 1amp charges a bad for your battery and do not allow proper charges this you get **** for battery life.
nice mods but not good for battery life
Sent from my PC36100 using XDA App
v_lestat said:
i have said it before and i will say it again , fast full 1amp charges are bad for your battery and do not allow proper charges. you get **** for battery life.
Click to expand...
Click to collapse
i heard you say that before, and i thought you were full of crap. after trying it for several charge cycles, it is plain as day. your battery charge WILL last longer from a slow usb half amp charge. seriously.
sometimes, however, it isn't worth waiting for. in a "non-primary" charging location such as a car, I can see the benefit in catching a quicker "top-off" charge.
I know your post is old, but THANK YOU MAN !!, i was having trouble obtaining only 100mAh from a AA-battery portable charger, modded a cable and now it's working so fine !!
Hmm, I could probably modify one of my short USB extension cables and cut off the data pins and keep that cable somewhere for cases where i'd prefer the turbo charge... Just snap on this usb extension cable (or maybe even an adapter) and boom you're getting the 1A charge
PS: my old WinXP box actually complains and shuts off the usb port if it sucks more than usual 500 mA, you would need to solder two usb connectors in parallel to fix that
I've found a micro USB charging cable on ebay, where the ad says it is for the P1000(7"), and wonder if for any reason it should not work as well with the P7510(10.1") as with the P1000. (search for "P1000 micro USB")
I'm only planning to use it for charging with the micro USB charger that caem with my SGS.
Anyone whit experience or thoughts on this cable adapter?
paua__ said:
I've found a micro USB charging cable on ebay, where the ad says it is for the P1000(7"), and wonder if for any reason it should not work as well with the P7510(10.1") as with the P1000. (search for "P1000 micro USB")
I'm only planning to use it for charging with the micro USB charger that caem with my SGS.
Anyone whit experience or thoughts on this cable adapter?
Click to expand...
Click to collapse
i ordered my 3rd party cables from dealextreme.com.
just search for samsung galaxy tab.
they work for me.
Anybody else tried these cables yet?
don't just charge with anything. If you want to get a charger, get a charger. This device doesn't use a MicroUSB anything. You need at least 1amp to push anything to the device and it won't fully charge with that. You need a 5w/2a charger to accomplish a 100% charge. My iPhone USB charger will charge it. Only to 66%. It's 1a. I'm guessing your charger is too. Look on amazon. I got a charger with cable for 20 bucks. Works flawlessly. It's in bulk packaging.
X10D3 said:
don't just charge with anything. If you want to get a charger, get a charger. This device doesn't use a MicroUSB anything. You need at least 1amp to push anything to the device and it won't fully charge with that. You need a 5w/2a charger to accomplish a 100% charge. My iPhone USB charger will charge it. Only to 66%. It's 1a. I'm guessing your charger is too. Look on amazon. I got a charger with cable for 20 bucks. Works flawlessly. It's in bulk packaging.
Click to expand...
Click to collapse
I live in noway, so the U.S plug that came with the Tab is useless for me. my current solution: a 3 ft cord making the total length of my charger almost 8 ft, and i really want something that is easier to carry around. Thanks for clearing that up anyways.
I am considering buying this usb charging adapter cable to help speed up my charging rate at work where I don't have an AC adapter and my work computer's usb ports are conveniently placed. From what I have read, normal usb charging maxes out at 500ma, but can be increased if your usb port has more juice if you short the data wires, which will tell the phone to grab more power because it thinks it is plugged into an AC adapter.
I have found this adapter http://www.dealextreme.com/p/usb-data-charging-extension-cable-for-samsung-p1000-black-91141
it is meant for a galaxy tab, but From what I see is that it has a switch that either allows data / slow charge or allows quick charging. I have purchased a few of these already because I'm assuming it will still work with my galaxy s2.
I'll let everyone know how it goes, but does anybody see a problem with this or think I'm going to fry my phone for any reason?
Thanks.
very interesting, heck it's only $3 bucks, might as well just buy it and find out
yes, charging via USB port sucks, it's too slow at 500 mAh
if that does the magic trick, by shorting it and making it believe it's an AC then it'll be nice, and it can pull around 1000 mAh off the USB port (depending on your computer mainboard)
Id be curious to see if this actually works but i see no fault in trying it
cbutters said:
I am considering buying this usb charging adapter cable to help speed up my charging rate at work where I don't have an AC adapter and my work computer's usb ports are conveniently placed. From what I have read, normal usb charging maxes out at 500ma, but can be increased if your usb port has more juice if you short the data wires, which will tell the phone to grab more power because it thinks it is plugged into an AC adapter.
I have found this adapter http://www.dealextreme.com/p/usb-data-charging-extension-cable-for-samsung-p1000-black-91141
it is meant for a galaxy tab, but From what I see is that it has a switch that either allows data / slow charge or allows quick charging. I have purchased a few of these already because I'm assuming it will still work with my galaxy s2.
I'll let everyone know how it goes, but does anybody see a problem with this or think I'm going to fry my phone for any reason?
Thanks.
Click to expand...
Click to collapse
Only the Galaxy Tablets have this limitation (they cannot be charged at all via computer usb only via their "special" wall adapter) so the adapter won't do anything for a phone. The adapter works on the tablet because what the adapter is doing is shorting 2 pins on the USB cable to fool the TABLET into thinking it is on the AC adapter "specially made" for it.
As long as you plug the phone it into a self-powered usb port (ie: a hub with a power brick) you will get max current the phone allows. The adapter will make no difference on the phone because the phone CAN charge off the PC port while the tablet cannot. It won't hurt the phone but it won't help it either.
MisterEdF said:
The adapter will make no difference on the phone because the phone CAN charge off the PC port while the tablet cannot. It won't hurt the phone but it won't help it either.
Click to expand...
Click to collapse
Thanks for the info on the galaxy tab, however I disagree with you in your opinion that an adapter that shorts the data wires will not help the phone to charge quicker.
It seems either the devices or android system itself limits charging to 500ma so it does not damage the computer, the phone itself knows that it is connected via usb, and will state "Charging: USB Plugged"
If you let the phone think it is connected to an AC adapter, it will allow the battery to accept whatever amperage you throw at it, and you will see that the system states "Charging: AC Plugged"
Obviously there are two modes of charging going on here.
See this thread:
see here:
http://forum.xda-developers.com/showthread.php?t=844284
Has anyone tried this yet?
I have found that using the Galaxy Tab chargers works the same way. They have a 2amp output vs the .5 amps that most blackberry chargers and USB use... It shortens the charge time significantly.
TMO SGS2, Darkside 3v8, Kernel Venom 3#5, UVLC8
Charger considerations
Hi,
I need advise for the following:
Charger A (Li-polymer battery) output : 5V, 1A
Charger B (Li-polymer battery) output : 5V, 500mA
Device input: 5V, 750mAH (Li-ion / Li-polymer)
When using Charger A, some people comment that it will limit the current of 750mAH for the device and the device's battery should be fine since both the charger and device are at 5V. However, some people comment that this will shorten the battery life of the device since it will perform a 'quick charge' using 1A.
When using Charger B, some people comment that the device will draw more current than it can deliver and causes it to heat up and reduces the charger's life. However, some people comment that Charger B will extend the battery life of the device since it performs a 'slow charge'.
I also read that USB pins on the charger denotes if the charger is a PC or a dedicated charger. If it is a PC, the device will limit the drawing current. If it is a dedicated charger, the device will draw more current to charge itself.
I am confused as to who is right and which charger should i be using.
Can someone enlighten me ?
Thank you very much.
What is the best solution for quick charging the Galaxy Nexus in an automobile?
I have started to use 12-220 volt converter so I can use wall chargers.
I have bought a few of the low profile car usb chargers but they were never recognized as an AC charge. Come to find out, it was the USB cable. I bought a usb charging cable from Amazon last week and it goes in the USB charger and the phone does not think it is a USB charge. I have not timed it but it is recognized the same as the wall charger.
http://www.amazon.com/gp/product/B003VYBCAY
ellisz said:
I have bought a few of the low profile car usb chargers but they were never recognized as an AC charge. Come to find out, it was the USB cable. I bought a usb charging cable from Amazon last week and it goes in the USB charger and the phone does not think it is a USB charge. I have not timed it but it is recognized the same as the wall charger.
http://www.amazon.com/gp/product/B003VYBCAY
Click to expand...
Click to collapse
+1 .. this solution has been working great for me, as well.
I've been getting 2.1A car chargers (look for ones for the iPad), most of the ones I had prior to this were 700mA or so and they can't keep up with my 1A phones. Be careful of dual port chargers advertising 2A, they may only be 1A each and may be "optimistic" about that rating. And don't worry about getting one rated for too much current, the Galaxy Nexus won't pull more than an amp no matter what the charger rating.
Some really good solutions here and thank you all for the help.
I'd really hate to use an inventer in my car just to maintain a clean install, so that really isnt an option for me.
Was really hoping to be able to use a off the shelf car charger with the correct pins to trick the GNexus into thinking that it was charging from a USB port, but the above solution should work well with using a socket USB charger.
I've never run into a car adapter that looks like a USB port, including the VZW charger with a spare port or the cheap 2.1A chargers I got from Amazon. My guess is that a charger not built correctly and leaving the data pins open only supports ~500mA anyway. Even if that's not the case I have a moral objection toward buying a cable to fix a design flaw in another cheap product - but that's just me
Grant H said:
Some really good solutions here and thank you all for the help.
I'd really hate to use an inventer in my car just to maintain a clean install, so that really isnt an option for me.
Was really hoping to be able to use a off the shelf car charger with the correct pins to trick the GNexus into thinking that it was charging from a USB port, but the above solution should work well with using a socket USB charger.
Click to expand...
Click to collapse
I've got a charger similar to http://www.ebay.com.au/itm/USB-Car-...ccessories&hash=item4ab18358f4#ht_1638wt_1392
All I had to do was undo the screws at the top, put a bit of solder between the middle usb pins, and my phone recognises it as a AC source rather than USB.
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Grant H said:
What is the best solution for quick charging the Galaxy Nexus in an automobile?
Click to expand...
Click to collapse
Make sure the charger has the IC (rapid) chip. I use this one:
http://www.amazon.com/Motorola-Vehicle-Adapter-micro-USB-Charger/dp/B000S5Q9CA
I've heard that Motorola one mentioned a lot as a good one.
The nice thing about having the low-profile usb plug is (a) it is low profile, (b) I can use it to charge other devices. The charge-only cable is only about $4, so I had no issues buying it to work with this to charge as an AC charge over a USB charge.
Grant H said:
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Click to expand...
Click to collapse
I have this one and it charges just like it does from the home outlet and its says "AC" charging. I bought another 8 for family and friends and they all love it.
I think I've figured out the disconnect, I've run into chargers that appear as a USB host which limits the charging to 500mA on previous phones I've had.
You guys are concerned about USB vs. AC charging mode. Of the chargers I've got, this one lists as AC while the rest as USB. However, the fact that the other chargers all work just fine keeping up with GPS+streaming music indicates that the USB vs. AC really has no bearing on the charge current delivered. I'd stay away from charge-only cables just because they'll get mixed in with your standard USB cables and you'll knock yourself out wondering why they don't work. On the other hand, if you really want AC in your battery info order the one I linked.
I keep it in my car... i think I've heard on other threads that USB charging doesn't keep up with GPS (for Directions). Any verify?
Sent from my Galaxy Nexus using XDA App
TheKaz said:
I keep it in my car... i think I've heard on other threads that USB charging doesn't keep up with GPS (for Directions). Any verify?
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
What's much more important is the rating on the power source. The GN can pull up to 1000mA, if your charger is only rated for 800mA (like many car chargers) it doesn't matter if it's in AC mode.
jdbower said:
What's much more important is the rating on the power source. The GN can pull up to 1000mA, if your charger is only rated for 800mA (like many car chargers) it doesn't matter if it's in AC mode.
Click to expand...
Click to collapse
makes sense.. the one I use has dual usb (1.0 and 2.1)
You went and gave me a project for the weekend, and once again science prevails over anecdotal evidence. I took each of my 5 chargers and hooked them up to a 12V power supply that measures current. I then recorded whether the charger reported AC or USB, for the ones with USB I modified a right-angle adapter to short out the data pins, and I measured the current. The contenders:
Verizon Wireless Dual Charger
XTG Dual Port Charger
Griffen Powerjolt Dual USB Charger
Griffen Portjolt Micro
CostMad Dual USB Charger
The VZW model was USB out the external port as I had tested before, however AC out the built-in cable which I hadn't bothered to test. It pulled 0.25A @12V via the USB port and 0.59A via the cable. Hmmm... A hole develops in my previous observation. While I had used this on a long car trip with no issues, it was via the built-in cable.
The XTG was new, I hadn't used it before as it's in the car I rarely drive. It reported USB and 0.22A. With the adapter to make it report AC it pulled 0.48A.
The pattern was set. I had expected the Griffen adapters to be built more appropriately but the dual charger reported 0.22A without the adapter and 0.42A with. I had used this without losing charge in the past so this was surprising to me, but it's possible I just wasn't drawing as much current because the screen was dimmer or something.
The compact Griffen adapter (which is great for a laptop bag, BTW) pulled 0.21A and 0.47A respectively.
The cheap CostMad adapter was the only one that performed well out of the box, both reporting AC and pulled 0.57A.
In theory, a perfect adapter should pull 0.42A. Anything more is waste, anything less means it's not keeping up. I have doubts about the Griffen 2x allowing for a full amp, but the VZW and CostMad chargers are pretty lossy. What's even worse is that I'm pretty sure the VZW charger is rated for 800mA (but I can't find an actual spec on it) which would mean that it pulled the most power for the least current. Not that this really matters unless you've got an electric car.
Sorry for misleading you earlier, I should have checked the other port of the known-good VZW charger and probably doublechecked the numbers on my other "known good" charger. Still hating cables that work for charging but not for data, I ended up modifying each of the chargers to short the middle pins (except for the VZW one). If I didn't have the soldering iron for this, I probably would have gone for some of these instead.
Grant H said:
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Click to expand...
Click to collapse
CyberPunk7t9 said:
Make sure the charger has the IC (rapid) chip. I use this one:
http://www.amazon.com/Motorola-Vehicle-Adapter-micro-USB-Charger/dp/B000S5Q9CA
Click to expand...
Click to collapse
I'm using the same one and it works perfect. Charges even when GPS navigation is running.
Make sure you select Amazon as the seller though. I heard there are a lot of fake ones.
Grant H said:
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Click to expand...
Click to collapse
+1 to those recommending this one. I have this exact model and it does indeed charge at the "AC" rate, about twice as fast as the "USB" rate.
TheKaz said:
I keep it in my car... i think I've heard on other threads that USB charging doesn't keep up with GPS (for Directions). Any verify?
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
The Motorola one will charge even when using GPS. I have a friend I bought one for that uses his GPS all day and loves the Motorola charger.