Related
This is stratosk's Semaphore JB kernel compiled for the GT-I9000B (Latin america variant of the I9000). Stratosk doesn't support this variant, so cronot tweaked the build to make this excellent kernel work for the I9000B variant. He now moved on to another phone so he has stopped working on this build, but not before handing it over to me - so I will now be building this kernel, at least for as long as stratosk does
With that said, here comes the disclaimer: By flashing this kernel, you accept that it comes without any support, neither mine and even less so from stratosk, since he doesn't support this variant on his own releases. So please don't bother him with support questions regarding this specific build. IOW: you'll use this kernel at your own risk.
There were reports of data loss during testing on early builds of the 2.8.x (kernel for Android 4.2) series - there were no more bad reports on later versions, but this needs to be said: Always do a nandroid backup before installing or updating any of the kernels posted here. I won't be held responsible if you lose data while using these kernels!
I *may* be able to help depending on whatever problems you might have, but don't expect timely answers, or any answers at all if I'm not technically able to figure out your problem - I'm a beginner on kernel development, all I did with this really was just some slight tunings and then recompile it for the I9000B. Also, I'm doing this on my free time, which is not much these days, so for now I'm just going to focus on following stratosk builds and recompile them for the I9000B as they come. I can say though, as far as problems, I don't have any with it on my device - it works fine and fast for me.
Now, on to the goodness:
This kernel is exactly the same as stratosk builds (hence, the exact same features and changelogs, including compiler versions and configuration), but with the following modifications:
Swap enabled;
ZRAM enabled as module (To configure it (on CM10), go into Settings / Performance / Memory Management);
KSM support enabled (Disabled on system by default, to enable it (on CM10), go into Settings / Performance / Memory Management)
Note about build version 2.7.0
Stratosk is no longer maintaining the 2.6.x builds that are meant for Android 4.1. But cronot was using Android 4.1 before he sold his SGS, and looking at some of the latest 2.9.0 features he felt like having some of its features on the 2.6.x builds, and so he did it. Since there are quite some important changes he thought it would be better to bump the version number to 2.7.0. Do note though that I provide this kernel here only as a convenience, I won't be supporting this version because I'll be compiling, testing and using only the kernels for Android 4.2, like stratosk does.
The 2.7.0 build contains the following cherry-picks from 2.9.0:
Reduce number of frame buffers for more RAM (on my ex-SGS I'm now at 383Mb, up from 377Mb);
Updated Interactive governor;
ROW I/O Scheduler
Known issues
None, as far as I know - feedback is always welcome!
What works
Everything, as far as I could see.
Usage
Just flash it on CWM like any other kernel. Normal version and 's' version are provided just like on stratosk's release. Use the Semaphore Manager app on Google Play, from stratosk, to setup the kernel features.
All instructions and documentation from stratosk's original Semaphore kernel applies to this one, so look into his own thread for more information.
Source
Github repository
Thanks
To stratosk, of course, for his awesome work on his kernel, and for letting me post this here for I9000-B users;
Everyone who is/was involved on the development of the Semaphore kernel - basically, anyone on stratosk's "thanks" list
Downloads:
Until version 2.9.12 here:
http://code.google.com/p/lu4ndr01d/downloads/list
Version 2.9.13 forth herein: http://code.google.com/p/luandroid/downloads/list
Version 2.9.18 forth herein: http://goo.im/devs/LU4NDR01D/Kernel/Semaphore
LInk my site: www.luandroid.com.br
To download previous versions follow the link my friend cronot.
http://forum.xda-developers.com/showthread.php?t=2011376
Re: [KERNEL][I9000B] Semaphore JB 2.9.7 (I9000-B only)
Version 2.9.8 on line.
Enviado do meu GT-I9000B usando o Tapatalk
Personnel who are having problems with BLN, just install this app and activate BLN will work.
Thank you so much ! I want to try Semaphore but never work on my I9000B
PS: With Bigmem I can't record on 720p but I've read that it's fixed, I'm wrong ?
Gezetah said:
Thank you so much ! I want to try Semaphore but never work on my I9000B
PS: With Bigmem I can't record on 720p but I've read that it's fixed, I'm wrong ?
Click to expand...
Click to collapse
Yes it can not, it is not not fixed, download the "SB", it does not contain the bigmen.
rubervalrfl said:
Yes it can not, it is not not fixed, download the "SB", it does not contain the bigmen.
Click to expand...
Click to collapse
Thats what I've downloaded "Semaphore_JB_2.9.8sb.zip" and I can't record. Do you mean Semaphore_JB_2.9.8b.zip ?
Gezetah said:
Thats what I've downloaded "Semaphore_JB_2.9.8sb.zip" and I can't record. Do you mean Semaphore_JB_2.9.8b.zip ?
Click to expand...
Click to collapse
I did not, which one you downloaded? must be the SB.
rubervalrfl said:
I did not, which one you downloaded? must be the SB.
Click to expand...
Click to collapse
I've downloaded the SB one, but I can't use the camcorder :/
Gezetah said:
I've downloaded the SB one, but I can't use the camcorder :/
Click to expand...
Click to collapse
Dude, you want me to post something you see, because this working perfectly, which rom you are using?
rubervalrfl said:
Dude, you want me to post something you see, because this working perfectly, which rom you are using?
Click to expand...
Click to collapse
Sorry, I don't want to bother you, each phone is different.
By the way I'm using CM10.1 (20130124), I'll try again.
EDIT: I saw this on the Semaphore thread...
Please note that there are 2 variations:
Normal versions: for CM10 or ROMs without hugemem configuration, available RAM 384MB - 396MB
's' versions: for Slim Bean ROM or patched ROMs with hugemem configuration, available RAM 397MB - 409MB
So, I'm using the normal version and everything works fine
PS: can I use the default CM10.1 performance menu or this kernel uses the Semaphore manager only ?
Gezetah said:
Sorry, I don't want to bother you, each phone is different.
By the way I'm using CM10.1 (20130124), I'll try again.
EDIT: I saw this on the Semaphore thread...
Please note that there are 2 variations:
Normal versions: for CM10 or ROMs without hugemem configuration, available RAM 384MB - 396MB
's' versions: for Slim Bean ROM or patched ROMs with hugemem configuration, available RAM 397MB - 409MB
So, I'm using the normal version and everything works fine
PS: can I use the default CM10.1 performance menu or this kernel uses the Semaphore manager only ?
Click to expand...
Click to collapse
Yes you can, I am currently in SlimRom compiled by myself, so I said this all working.
Tried 2.9.8b, everything works good but I get an error everytime I try to flash a rom that does not have Semaphore 2.9.8b.
Zkaar said:
Tried 2.9.8b, everything works good but I get an error everytime I try to flash a rom that does not have Semaphore 2.9.8b.
Click to expand...
Click to collapse
What is the error?
Hello, I would like to know if I can use this kernel in a normal GT-I9000, the international version, because I'm interested in ZRAM and KSM.
What is the special compilation for the B version?
Re: [KERNEL][I9000B] Semaphore JB 2.9.8 (I9000-B only)
eTomm said:
Hello, I would like to know if I can use this kernel in a normal GT-I9000, the international version, because I'm interested in ZRAM and KSM.
What is the special compilation for the B version?
Click to expand...
Click to collapse
If you use the normal kernel on the I9000B the touchscreen doesn't work, but it has the same features, you can download the I9000 kernel from the official site.
Enviado desde mi GT-I9000B
eTomm said:
Hello, I would like to know if I can use this kernel in a normal GT-I9000, the international version, because I'm interested in ZRAM and KSM.
What is the special compilation for the B version?
Click to expand...
Click to collapse
As our friend said above, this compilation is for Latin version of the device, sold in Brazil, Argentina and some other countries in South america
rubervalrfl said:
What is the error?
Click to expand...
Click to collapse
It is a generic error, like "get build.prop failed". I always get that when trying to flash a I9000 ROM or a corrupt archive.
I can't really type the error now, it is big, and I've rolled back to 2.9.7b
Zkaar said:
It is a generic error, like "get build.prop failed". I always get that when trying to flash a I9000 ROM or a corrupt archive.
I can't really type the error now, it is big, and I've rolled back to 2.9.7b
Click to expand...
Click to collapse
Dude, I'm not getting this error your understanding, your device is "I9000B" or "I9000", where "B", please send the logcat because the way that, I can not help you.
Another thing, as you have seen deterioration, also'm Brazilian, please make me a visit at my site and describe in Portuguese unclear what his mistake, ok.
Zkaar said:
It is a generic error, like "get build.prop failed". I always get that when trying to flash a I9000 ROM or a corrupt archive.
I can't really type the error now, it is big, and I've rolled back to 2.9.7b
Click to expand...
Click to collapse
I have the same error when using CMUpdate, the phone restarts after download the rom and it gives me an error.
Hi Guys,
Its been a very calm around Nexus 4G forums, and all the goodies are only coming towards Nexus S GSM.
So wanted to share the CM10.2 build which I have been using for a day. Let me know what you think !
What doesn't work :-
1. WiMax
What works :-
Everything, Including ART !!!
Sincere thanks to :-
1. CyanogenMod Team
2. Codeworkx
3. Google
4. Linus
Enjoy guys! and let me know what you think !
Build 16:
Download URL :- https://drive.google.com/file/d/0B9X29cIkNoQEZTl5eV8wNGhfN1U/edit?usp=sharing
Changelog :- Repo Sync.
Build 15:
Download URL :- https://drive.google.com/file/d/0B9X29cIkNoQEZGJfVk9PcXJqdnM/edit?usp=sharing
Changelog :- Cleaned up Repo and Device configurations.
Build 14:
Download URL :- https://drive.google.com/file/d/0B9X29cIkNoQEMTIxZUxJUkNzRFk/edit?usp=sharing
Changelog :- Repo synced.
Build 13:
Download URL :- https://drive.google.com/file/d/0B9X29cIkNoQEOFVpVGN6Z29Jdmc/edit?usp=sharing
Changelog :- Repo Synced. Default zRAM.
Build 12:
Download URL :- [ur]https://drive.google.com/file/d/0B9X29cIkNoQEam0zSmJNUGhTTWs/edit?usp=sharing[/url]
Changelog :- Repo Synced.
Build 11:
Download URL :- https://drive.google.com/file/d/0B9X29cIkNoQESk9MSEhKWHozOTA/edit?usp=sharing
Chagelog :- Repo Synced 4.4.2 !
Build 10:
Download URL :- https://drive.google.com/file/d/0B9X29cIkNoQEdFdCaFgwQ3Y3ZWM/edit?usp=sharing
Changelog :- Repo synced and few changes towards zRAM.
Build 9 :
Download URL :- https://www.dropbox.com/s/imnpsldjg3u8e9x/cm-11-20131209-UNOFFICIAL-crespo4g.zip
Changelog :- Android 4.4.1 !
Build 8 :
Download URL :- https://www.dropbox.com/s/vz6wv65tzz47lyh/cm-11-20131205-UNOFFICIAL-crespo4g.zip
Changelog :- Apart from Wimax, mostly everything else is in the same status of CM10.2.
Build 7:
Download URL :- https://www.dropbox.com/s/dxrqa3xvrn847e6/cm-10.2-20131021-UNOFFICIAL-crespo4g.zip
Changelog :- RIL changes to sort out the issue with Data connection not starting automatically, LTO. Found few possible issues with MMS, would upload a new build for it.
Build 6:
Download URL :- https://www.dropbox.com/s/ug5v11wpecpbgpj/cm-10.2-20130930-UNOFFICIAL-crespo4g.zip
Changelog :- Verified SMS working. Data Connection issues still persist. Looking at that.
Build 5:
Download URL :- https://www.dropbox.com/s/g59y0z28o5cvi9g/cm-10.2-20130924-UNOFFICIAL-crespo4g.zip
Changelog :- Update Repo to latest Crespo, Using Exynos 3 Libs, Stock Overlays.
Build 4:
Download URL :- https://www.dropbox.com/s/pssxjmikn861cla/cm-10.2-20130915-UNOFFICIAL-crespo4g.zip
Changelog :- Fixed GPS, and some optimisations. Got new CMAccount.
Build 3:
Download URL :- https://www.dropbox.com/s/8059wlwffev07il/cm-10.2-20130903-UNOFFICIAL-crespo4g.zip
Changelog :- Fixed Focal issues and keypad & brightness issues.
Build 2:
Download URL :- https://www.dropbox.com/s/4gf44s2e4v5kbw4/cm-10.2-20130902-UNOFFICIAL-crespo4g.zip
Changelog :- Fixed wifi tethering.
Build 1:
Download URL :- https://www.dropbox.com/s/z9xu1t4yibg13k5/cm-10.2-20130830-UNOFFICIAL-crespo4g.zip
Gapps (4.3) :- http://goo.im/gapps/gapps-jb-20130813-signed.zip
Gapps (4.4 ) :- http://forum.xda-developers.com/showthread.php?t=2012857
TWRP :- https://www.dropbox.com/s/1wlzqmm9dcqm3v7/recovery-TWRP-crespo4g.img
Hit thanks !
I can't find anything wrong besides WiMax that you mentioned in op. Thanks for this build!
Sent from my Nexus S 4G using XDA Premium 4 mobile app
Awesome!! I'm glad people are finally starting to get some 4.3 roms posted I haven't had much time lately or I'd throw my hat in the ring too.
Does Wifi Tether work?
No go on WiFi tether
Sent from my Nexus S 4G using XDA Premium 4 mobile app
Thanks for the build. Its been running smooth all day, came across no issues yet. I've flashed jb-20130821 gapps and its running good, at first market won't download any apps just give it some times for market to update. Figure I'd just say. Thanks again. :thumbup:
kijp15 said:
Thanks for the build. Its been running smooth all day, came across no issues yet. I've flashed jb-20130821 gapps and its running good, at first market won't download any apps just give it some times for market to update. Figure I'd just say. Thanks again. :thumbup:
Click to expand...
Click to collapse
Is the Focal app FC-ing with the 8/21 gapps? That's the only app giving me a FC about 5 seconds after it opens. I tried 8/13 gapps but I am going to try a fresh install now
JohnCorleone said:
Is the Focal app FC-ing with the 8/21 gapps? That's the only app giving me a FC about 5 seconds after it opens. I tried 8/13 gapps but I am going to try a fresh install now
Click to expand...
Click to collapse
Yes, you right. In fact it freezes and then can't seem to access camera after until reboot or something. Just found that out. Haha. Thanks.
kijp15 said:
Yes, you right. In fact it freezes and then can't seem to access camera after until reboot or something. Just found that out. Haha. Thanks.
Click to expand...
Click to collapse
Ok, thanks for confirming that for me! I may pull that apk and see if if works on that other 4.3 AOSP build
JohnCorleone said:
Ok, thanks for confirming that for me! I may pull that apk and see if if works on that other 4.3 AOSP build
Click to expand...
Click to collapse
No problem. I may freeze the app or find a fix as well. If I find a fix I'll let you guys know.
Edit: Haha, Can't seem to fix it. I guess its Google searching time. xD
Nice work
Can I see your device tree source ? or could you send your change via cyanogenmod gerrit ?
Thanks
Gingo21 said:
Nice work
Can I see your device tree source ? or could you send your change via cyanogenmod gerrit ?
Thanks
Click to expand...
Click to collapse
Yeah sure been planning on doing just that. Would do once my code base is a little cleaner.
BTW, have solved the wifi & bluetooth tethering issues.
Uploading the build ! I think i found the problem with focal. would upload the build once i have tested the same.
This is running great. Thanks. The one issue I have, is that when I get off WiFi, my Sprint 3g doesn't kick in.
Sent from my Nexus S 4G using Tapatalk 4
New Build is up.
Wifi tethering is fixed.
Testing a personal build with Focal and other issues fixed ! Would upload once verified.
adityaxavier said:
New Build is up.
Wifi tethering is fixed.
Testing a personal build with Focal and other issues fixed ! Would upload once verified.
Click to expand...
Click to collapse
Great news on the Wifi Tether working. Will try this out.
Uploading a new build.
It should have fixed the Focal issues and others which might have happened due to lights hal.
Do let me know if you find any other bugs, or i would just start with the cleanup and wimax.
adityaxavier said:
Uploading a new build.
It should have fixed the Focal issues and others which might have happened due to lights hal.
Do let me know if you find any other bugs, or i would just start with the cleanup and wimax.
Click to expand...
Click to collapse
Wow I am late to check this forum! I will flash the latest build in a few min. Starting download now. Thanks
Nice progress on the latest build! 3G is working, eri.xml is fixed, Focal seems to be working.... Great stuff!
Sent from my Nexus S 4G using Xparent Gray Tapatalk 2
This is the "snappiest" my phone has ever been. Best battery life as well. Still no Sprint 3G. Is there something I need to do get the 3G going again? I did a full backup prior to flashing, and don't know if there's a certain file I need to restore. Under Wireless & Networks / Manage Mobile Plan - it asks me to insert a SIM card. We're all on CDMA right?
PolishPrince said:
This is the "snappiest" my phone has ever been. Best battery life as well. Still no Sprint 3G. Is there something I need to do get the 3G going again? I did a full backup prior to flashing, and don't know if there's a certain file I need to restore. Under Wireless & Networks / Manage Mobile Plan - it asks me to insert a SIM card. We're all on CDMA right?
Click to expand...
Click to collapse
Hmm, thats weird. Could you perhaps do a backup, clean wipe and try again. Cause 3G is working just fine for me, and i believe others.
Regarding Manage Mobile Plan. Yeah its only meant for GSM Devices. I need to remove it
Hi this is the build of CyanogenMod 11.0 I've been working on for the past couple of weeks. It is now very stable and I would say daily driver worth. Enjoy.
Working:
Boots
Display
Audio
Bluetooth
Mobile network
Wi-Fi
Phone Calls
Storage
lights
Camera
Bugs:
Unsure
Source:
www.github.com/TeamNightmare
Credits:
CyanogenMod
Google (Android)
Everyone in the git commit log
Downloads:
Check the downloads page
If you wish to donate this is a charity that I am fond of. Donate here
XDA:DevDB Information
CyanogenMod 11.0 for the D851, ROM for the T-Mobile LG G3
Contributors
sportsstar89, Sportsstar89, intervigil, invisiblek
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2014-10-22
Last Updated 2014-11-15
Reserved
reserved 11111111
reserved 22222
reserved 2222222222222222222222222222222222222222
Wow! Too excited!!
NICE! Can't wait for stable build.
Looking forward to seeing how this will progress!
Whatttttt. Havnt seen you since the amaze days yo!
Sent from my LG-D851 using XDA Premium 4 mobile app
Vibration doesn't work right and thanks for posting it in the right section ??
(Heavy breathing)
Sent from my LG-D851 using XDA Free mobile app
I been waiting, very excited!!!
Thanks for the work on our devices, great to see some more people working on it for sure!
Im pretty brand new to this rom thing on android, but cant we just use the sound drivers from lg open source files and add them into a asop?
aclegg2011 said:
Im pretty brand new to this rom thing on android, but cant we just use the sound drivers from lg open source files and add them into a asop?
Click to expand...
Click to collapse
finally!
aclegg2011 said:
Im pretty brand new to this rom thing on android, but cant we just use the sound drivers from lg open source files and add them into a asop?
Click to expand...
Click to collapse
If only it were that easy..
Amazing! Pumped for this ROM, keep it coming!
woah !!! woah !!
wavrunrx said:
Click to expand...
Click to collapse
I'm pretty brand new to android porting but let me try my best to explain
We try only to use oem files for purposes of which they can't not be recreated because it's harder to try to make a proprietary file's hidden code work than modify a template file
Plus from what I have seen, there's not a lot of LG dev support for this phone yet(I cant even find the kernel source for it)
On top of that, most of the problems s listed are difficulties lie in the HAL(hardware abstraction layer)
The HAL helps hardware of the phone communicate with both the framework and the kernel
The HAL's for each component and associated file are not required by Google to be released with a phone, only it's kernel source so we don't have access to the sources for the HAL
That's just a few reasons I have found from my experiences with HTC phones I could be wrong on this but I'm pretty sure most of it is right though
Has anyone flashed this yet? Would like tknoif it has theme chooser
No I have not
Hi.
This is United Oxygen team.
We are going to show Official BlissPop for Optimus G Pro with our jolla-kernel ported for G Pro.
This thread is going to be renewed soon.
!NOTICE!
This ROM contains jolla-kernel, which means this ROM supports MultiROM.
RIL is almost FIXED!
When we make a stable ROM, I will re-design our CM thread with PC.
But now, I would just write with mobile, dirty, like this.
And, we'd finally changed our host server, from Innoloud to AchonApp, due to Innoloud's lots of bugs.
What doesn't work:
- T-Money (Korea)
- MMS (Only for F240L - Test with Hangouts, please.)
- Maybe More? You tell me.
You should check:
- Camera (Including 3rd party Camera)
- Installation of Minecraft APK (One Korean said he cannot install it.)
- RIL if it is stable or not now.
ROM Download:
* Optimus G Pro (Korea/Intl)
http://lap.so/krpi
(Download 1021 version.)
(Please select right carrier version for F240. E980 users should download e980 named ROM.)
* Optimus GK
http://lap.so/btme
(Download 1021 version.)
What's Updated:
* 2015.11.11
- Second Release.
- OTA Added - you can download tweaks or kernel updates via OTA app.
- jolla-kernel 5.1 added.
@Genie's, please support Optimus Gx F310!. Thanks in advance.
Can I run any 5.1.1 gapps with this rom
DLM2583 said:
Can I run any 5.1.1 gapps with this rom
Click to expand...
Click to collapse
Yes, you can.
Thanks I'm running the ROM already but can't find APN setting I went into wireless and networks but I don't find mobile data option to add new APN so I don't have mobile data
We are now tring to support E980.
Please download E980 version and test ROM and whether MultiROM is supported or not.
If you install this ROM in Primary Slot, please enter this adb command to know us what E980's kexec code is. :
adb shell
su
dmesg | grep -i hardboot
Hey there I ran the ROM all day today and battery drain is pretty bad and its coming from Google play services...... I'm using Google experience launche.... But i don't think its the Google now cards that are the problem any ideas
We can't solve the probelm associated with Google Play Services... I just recommend you to use Greenify to hibernate some Google Service.
Have been using & pretty good rom.thanks!
Can u only post the kernel so we can use this on any cm based roms and on every new builds.. Is it possible ?
@Genie's, brother, can you share the kernel separately? I love your ROMs, and want also to test other ROMs using OxyGen kernel. Best kernel for F240 so far!
Does it work with E980 yet I am confused by the original post and the one below it?
rjmxtech said:
Does it work with E980 yet I am confused by the original post and the one below it?
Click to expand...
Click to collapse
Oh, I'm sorry. I fixed my first thread. E980 is supported now.
Sent from my Galaxy S4 (SHV-E300S) using XDA Mobile App
DLM2583 said:
Thanks I'm running the ROM already but can't find APN setting I went into wireless and networks but I don't find mobile data option to add new APN so I don't have mobile data
Click to expand...
Click to collapse
Go into settings >data> click 3 dot menu upper right side and you will found the mobile network on last tab. Hope its helpful.
Sent from my LG-F240L using XDA Free mobile app
Yeah thanks it toko me at least two days to figure this one out but thanks
Updated!
Download 0626 Version!
ChangeLog :
- Oxygen Kernel V2.5 Applied! (Which means new ramdisk applied and could be ported to other e980 ROMs!)
- RIL would be go normally when you reboot 5-6 times. It' hard to fix.
- RIL Fix for LG U+
Genie's said:
Updated!
Download 0626 Version!
ChangeLog :
- Oxygen Kernel V2.5 Applied! (Which means new ramdisk applied and could be ported to other e980 ROMs!)
- RIL would be go normally when you reboot 5-6 times. It' hard to fix.
- RIL Fix for LG U+
Click to expand...
Click to collapse
Will this kernel work on stock 5.0.2 lollipop rom E980.? Any ideas
Hamza1010 said:
Will this kernel work on stock 5.0.2 lollipop rom E980.? Any ideas
Click to expand...
Click to collapse
Of course, not.
Kernel used in Stock and CM are each different.
Sent from my LG G3 using XDA Mobile app
Genie's said:
Of course, not.
Kernel used in Stock and CM are each different.
Sent from my LG G3 using XDA Mobile app
Click to expand...
Click to collapse
Thanks for answering.Is there any other featured kernel you know of that I can use on my current rom.??
Hamza1010 said:
Thanks for answering.Is there any other featured kernel you know of that I can use on my current rom.??
Click to expand...
Click to collapse
I don't know well about E980 cuz I'm living in Korea.
Maybe...You should find them in OpGpro Threads.
Sorry.
Sent from my LG G3 using XDA Mobile app
UPDATE 08/03/16
new build out eventually, have been a bit busy last couple days, new build is ready
changelog
Code:
Updated kernel Auditor to my latest custom version
DT2W active in kernel (not enabled y default)
cpu undervoltage works now and can be changed via kernel auditor
call recording enabled
fixed the frozen lockscreen issues (thanks to hennymcc for info on that)
bluetooth audio should work too
HW Video Accell fixed
few other little tweaks
the custom kernel auditor in this build has been modified to allow enabling dt2w and cpu voltage control
download link
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160306-110028.zip
----------------------------------------
UPDATE 24/02/16
Ok another new build,
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160224-170017.zip
changelog
Code:
fixed flashing zip
few minor tweaks
UPDATE 20/02/16
another fix - ill get this right eventually.
download link:
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160220-100535.zip
changelog
Code:
zip should be fixed now too
removed TWRP from the zip will be updating my twrp post with a zip to install that shortly
hopefully fixed call audio this time
Kernel is now built with Hyper-Linaro 5.1 GCC
Rom Now built Using Sabermod toolchain for performance
----------------------------------------------------------------
UPDATE 19/02/16
yet another update folks,
download link :
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160219-170840.zip
changelog:
Code:
Fixed Sensors Libraries so they work again - also added partial support for heart rate sensor
Fixed MTP so it works again
F2FS Support Included,
TWRP3 Recovery built in
Audio Finally Fixed Including Headset Switching.
again let me know of any bugs
known issues:
touch screen still has weird issues after sleep haven't managed to narrow it down yet
---------------------------------------------------------------
UPDATE 17/02/15
Ok lets try this again,
new build up,
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial.zip
changelog
Code:
Fixed the Phone call sound and mic issues,
enabled F2FS support for /data and /cache partitions, system will auto mount those partitions as either ext4 or F2FS depending on their format - will have a fixed TWRP 3 out tomorrow with F2FS support
any bugs please let me know again folks.
you need to flash SuperSU after this rom to enable root - i have attached supersu zip to this post
-------------------------------------------------------------------------------------------------
UPDATE 14/02/15
new update out today folks
Changelog
Code:
Replaced the old crappy unstable kernel with a new build of my LP TardisKern with 1.7Ghz CPU OC etc.
Replaced a bunch of samsungs proprietary libs in the build to make sure it works with the new kernel
Replaced the Stock Camera app with Snap Camera from cyanogenmod
Removed google apps this time round :)
automatic brightness works but is not perfect yet (still working on it
you will need to grab supersu and install that after the build to get root going
link :
http://www.dmpwap.xyz/roms/pac_kminilte.zip
please advise of any issues again folks.
i have also uploaded my own device and proprietary tress for compiling with this new kernel
-----------------------------------------------------------------
hello folks.
sorry ive been very quiet the last week or so but ive been working hard on some new things (including that nice new lollipop kernel source for the G800F which is still In progress)
need to give a massive thanks to arkansawdave74 for helping with this and the build for the H model, and for helping give me the kick i needed to get back into android development proper.
but i have actually got some useful work to announce now
i am proud to announce the first BETA release of PAC-Rom for the Samsung galaxy S5 Mini LTE(G800F) (yes i have one for the dual sim H model aswell getting posted soon)
download links are below, and i will let others post screenshots etc as i dont currently have the time since im typing this late at night to get any.
PLEASE BE ADVISED THIS ROM IS FOR THE SM-G800F ONLY AND COULD CAUSE A BRICK IF FLASHED TO OTHER DEVICES
http://www.dmpwap.xyz/roms/pac_kminilte.zip
this is now using a fully up to date TardisKern with 1.7ghz oc amoungst other things.
please mention any bugs etc so i can get to work on them.
current issues noted:
selinux support is completely disabled
mtp(usb storage) may or may not work as my pc does not seem to want to play with any usb storage devices currently
working
phone,
messaging(mms/sms)
mobile data including LTE/4G
display and 3d graphics
remote control transmitter
google apps
wifi
GPS
sound
bluetooth
pretty sure everything else works too
any and all donations would be much appreciated to help cover hosting costs
XDA:DevDB Information
PAC-ROM 5 For Galaxy S5 Mini (SM-G800F), ROM for the Samsung Galaxy S5 Mini
Contributors
DJ_Steve, arkansawdave74, PAC-Rom team, Jackeagle & hennymcc for Device Trees
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: PAC-MAN Rom
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2016-01-30
Created 2016-01-31
Last Updated 2016-03-08
Thanks you for this rom ?
Envoyé de mon SM-G800F en utilisant Tapatalk
Issues?
First thanks to you. but can you rewrite the mainpage and write exactly what works and what not? That would be very helpful
raffejos said:
First thanks to you. but can you rewrite the mainpage and write exactly what works and what not? That would be very helpful
Click to expand...
Click to collapse
updated the main post, but most things seem to work
No root access !
I have the settings on Apps and ADB.
But apps dont have root access.
I am going back to CM 13 !!!
another343 said:
I have the settings on Apps and ADB.
But apps dont have root access.
I am going back to CM 13 !!!
Click to expand...
Click to collapse
Have you installed SuperSU from play store.. Root works fine for others
Sent from my SM-G800F using Tapatalk
Got it !
I used the rooting tool : KingRoot.
That fixed it.
But the system setting still doesnt work.
Also I dont like the camera app.
The CM Snap app is better
the setting worked fine here and still does so im thinking thats something on your end, as for camera i cant comment as ive used cm for about 5 mins and that will be all i ever use it for, cm is far too bloated in my personal opinion and actually seems to perform slower than touchwiz for me, and what rom people choose to use is always personal preference in my opinion
another343 said:
I used the rooting tool : KingRoot.
That fixed it.
But the system setting still doesnt work.
Also I dont like the camera app.
The CM Snap app is better
Click to expand...
Click to collapse
Got it !
I used the rooting tool : KingRoot.
That fixed it.
But the system setting still doesnt work.
Also I dont like the camera app.
The CM Snap app is better
Another Problem !
DJ_Steve said:
the setting worked fine here and still does so im thinking thats something on your end, as for camera i cant comment as ive used cm for about 5 mins and that will be all i ever use it for, cm is far too bloated in my personal opinion and actually seems to perform slower than touchwiz for me, and what rom people choose to use is always personal preference in my opinion
Click to expand...
Click to collapse
Google play refuses to install apps with error: 963 and 924.
I tried costum gApps but still nothingBut it works on other ROMs.
Please Fix.
another343 said:
Google play refuses to install apps with error: 963 and 924.
I tried costum gApps but still nothingBut it works on other ROMs.
Please Fix.
Click to expand...
Click to collapse
Strange how your having problems as im using the same exact build and play store works fine here. Have you tried a wipe
Sent from my SM-G800F using Tapatalk
DJ_Steve said:
the setting worked fine here and still does so im thinking thats something on your end, as for camera i cant comment as ive used cm for about 5 mins and that will be all i ever use it for, cm is far too bloated in my personal opinion and actually seems to perform slower than touchwiz for me, and what rom people choose to use is always personal preference in my opinion
Click to expand...
Click to collapse
Root make over Odin , add a file attached to pda or ap and restart the unit . in my work .
Root work fine you need just turn root on in dewelopers
Options in setings like in cm12.1
Bloatware !!!!
Can you remove all the gApps like Fit,Movies Play ....
Please I wanna install gApps like Open Gapps Pico.
And if you are gonna do it, please dont remove the launcher.
Bye m8
another343 said:
Google play refuses to install apps with error: 963 and 924.
I tried costum gApps but still nothingBut it works on other ROMs.
Please Fix.
Click to expand...
Click to collapse
same to me please fix it i very like this super fast ROM !!! thx
liborhabrnal said:
same to me please fix it i very like this super fast ROM !!! thx
Click to expand...
Click to collapse
already planning to fix that - didnt mean to leave the gapps in in the first place just forgot to remove them after testing myself
Please remove the gapps so everyone can choose the gapps fron opengapps oder somewhere else. Althoug Please use another launcher so not the Google now launcher for example trebuchet from cyanogenmod. The features are the best but i cant use it daily because gapps:cyclops:
Your work is awesome and a progress in custom Roms for the nice s5 mini:good::good:
raffejos said:
Please remove the gapps so everyone can choose the gapps fron opengapps oder somewhere else. Althoug Please use another launcher so not the Google now launcher for example trebuchet from cyanogenmod
Click to expand...
Click to collapse
try to be polite, as that comes across as quite nasty in some ways(though i understand english may not be your natural language so quite possibly is not your fault), ill be fixing that issue once i get my build system back up and running which it is not currently
Deleted
link should be back now
and i wont use drive etc after previous big issues with them years ago
(and why would i pay for android file host when i have my own server)