hi everyone,
I´m having a problem with my DHD (I´m using ARHD 6.1.1):
In settings > wireless & networks > mobile networks > network mode I´m not able to set only GSM, the button is just not there...
there are only 2 options, WCDMA only & GSM/WCDMA auto
I´m from Austria and have just switched to Three (3) Austria, which has only 3G network by itself. The GSM network is provided by A1. So if I´m somewhere where the 3G connection is not that good, the phone starts jumping between GSM and 3G network, which is really annoying and costs a lot of battery.
I know that there was an option like GSM only, but since the new version came out it just disappeared.
Reflash and Wipe + Flash didn´t worked for me. Radio is the correct version!
Is this a problem with the ROM or with my APN settings? I´ve just tested CM7 and there I´m able change between 2G and 3G with no problems.
Anyone has some ideas? Thanks for help!
jackazz
changes Rom
!!!!!!!!!!!!!!!!!!!!
i use ardh 3.3 and the same options there
Related
Hi there,
since the last two ROM/Radio upgrades my trion fails to connect to GSM/GPRS. The 3G/UMTS/HSDPA connection works fine, both for voice and internet. When I try to switch to GSM only or if no 3G is available the device fails to connect. When I use the same SIM in another trion (with the original ROM) everything works fine (GSM & 3G).
This behaviour persists since I upgraded the Radio to 1.54.30.10 and Schaps 4.01, before that I had 1.41 and Schaps 3.3 working fine. Now I downgraded the Radio to 1.47.30.10 and installed Pays ROM (PaysGER215Full.rar). Same result, no GSM connection.
Any ideas?
Thanks,
sroeder
Hello.
Check Under , Settings , Phone, Band That
"GSM/UTMS Band" if that Say " AUTO " And not
UTMS (2100+800) .
If that don't help, than i'm clueless.
And yes, If you don't have the "band page" use Schaps Advanced Configuration tool to Enable the "Band page".
/Mika
The settings were already on AUTO on all fields.
I actually got today a substitute phone after talking to the service staff. The phone simply would not connect to gprs/gsm anymore, even not after installing the original operators ROM. They said it might be a hardware issue.
I have the same problem.. I'm using HTC Hermes and suddenly I've lost GSM connection, only 3G available.. If I set GSM only there is an alert "No service". Is there any solution? I did HR - still nothing..
To be more accurate, nothing but UTMS.
The phone just will not connect to a network. This morning on 2.1 Eclaire,no problems, upgrade from 13:00GMT and then nothing.
I have gone through the following checks:
Settings, Wilress & Networks, Mobile Networks, Network Mode, and ensured that both GSM and WCDMA modes are to auto select. In that menu also ensuring that Enable Always-on Mobile data is ticked.
Using above, i have de-selected the options to use GSM only, and WCDMA only, also interchanging both of these with reboots of the phone. No go.
I have also *#*#4636#*#* , Phone Information, to see what the network was connecting as, also ensured that the phone selection preference is WCDMA preferred.
I have also changed this to be 'only' and rebooted.
I'm out of ideas, and frankly looking to see if anyone has had this problem?
Would appreciate thoughts and advice. Thanks in advance!
Same here!!! HSDPA lost immediately after updating to Froyo
Solved now, turns out APN settings got cleared during the update and needed to be rest ...
yep everytime is this APNs
had the same issue today after the upgrade, all the other settings were kept except for the APN which was a bit strange.
Hi guys, I just recently rooted my htc desire, before I did that everything works fine as far as I know(3g,fast download in market etc) but after I rooted my desire it only has edge and sometimes gprs connection. I checked my apn and everything is fine by the way Im with rogers right now and my phone is unbranded
Have you tried setting the phone to use UMTS only?
Its in settings -> wireless & networks -> mobile networks -> network mode
I can only see 3 options which is wcdma only, gsm only, gsm/wcdma auto. Everytime I choose wcdma only it always goes back to gsm only or gsm/wcdma auto.
Did you update the Radio?
Regards,
Dave
hi friends.
i have installed energy6.5 rom in my diamond and its working fine. but now i am unable to register on any 3g network. whenever i select wcdma network in setting-phone-band.... then wait icon appers and it comes back to phone option then automaticallly gsm network selected....
i checked 3g signal in my nokia 3g phone after selecting umts in it 3g is working completely fine....
can anyone help on this?
thanks
plz someone help
smarty84 said:
hi friends.
i have installed energy6.5 rom in my diamond and its working fine. but now i am unable to register on any 3g network. whenever i select wcdma network in setting-phone-band.... then wait icon appers and it comes back to phone option then automaticallly gsm network selected....
i checked 3g signal in my nokia 3g phone after selecting umts in it 3g is working completely fine....
can anyone help on this?
thanks
Click to expand...
Click to collapse
You should post to energy thread.
Check your Radio version and the matching rilphone.dll. Don't forget to MTTY before flash.
Cina.
i also posted same question in energy thread but no one replied..........
Hello Guys,
I'm experiencing a problem with my Froyo Desire for probably a week now.
The thing is that in certain areas my Phone can not receive calls / sms or such. In other words "GSM services" dont work. 3g though works fine (stable, strong and fast connection) My Provider is T-Mobile.
After quite a lot of testing I was able to isolate the error:
When WCDMA / GSM is chosen by the phone automatically it seems to me as if it didnt switch "back" to register with my provider via GSM when i want to make a call or if someone wants to call me.
When i switch to "GSM only" manually everything works fine but i have no 3g of course.
I also experience this problem only in certain areas. I live in an area where there is really strong HSDPA available (up to 7mbit\s). When i go to other places of my city i still get HSDPA (not as strong) but calls / sms still work.
The last paragraph may be of no importance, i don know.. probably it helps..
I have googled quite much about this problem and also found a few persons experiencing the same issue but nobody was able to come up with a solution.
I would be very thankful if someone could try to figure this out.
schnip
push______
Hi Guys,
... exactly the same problem here!
- same device
- t-mobile germany
- problem exists only in specific cells
ideas or solutions welcome
LordKnut.
gsm only Desire?
I'm having a nightmare with 3g 2g connectivity on my Desire on the three network whilst at home. If I could manually select gsm only this would be fine as I could still call and text and use wi-fi. Unfortunately my options are gsm/wcdpa (or whatever) auto or the 3g only.
can someone please advise if it is possible to select gsm only and if so, how?
many thanks
Can someone please advise me how if possible, to set the desire to gsm only?
VKeane said:
Can someone please advise me how if possible, to set the desire to gsm only?
Click to expand...
Click to collapse
Wireless and network-Mobile network- should be here somewhere.
Thanks, but there is no option for gsm only. It's wcdma only or gsm/wcdma auto. there has to be a way around this.
Similar problem, different version
I've experienced similar problem.
In some area, I can get steady grps signal when I switched GSM only on; but when I switched WCDMA/GSM on, I could get no data connection at all.
I'm using China Unicom's mobile service.
Solution
Hi there,
I've the same issue and I fix it allowing the option GSM/WCDMA Auto in the configuration menu.
Then enter the following code *#*#4636#*#*, select "phone Information" and set preferred network type, set "GSM car (PRL)".
Sorry about my bad english.