So I don't broadcast my wifi at my house but have it saved on my phone. It is a pain to have to enable my broadcast before the phone connects even though the network info is saved in there.
Is there anyway to make it connect even if I don't broadcast kind of like the settings you can choose in windows for your pc to connect to your wifi without needing it to broadcast signal?
Maybe there is a third party app that does this?
Anyone...?
Related
Hi guys, I recently destroyed my XDA2 and got a 2s on the insurance
Bluetooth on WM2003 SE if fair poor, but I managed to upgrade the stack thinger to 3900..... so I'm not completely XDA illiterate.
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
It has become clear that I have no idea what I'm doing with regards to networking. Could someone post a quick guide as to how to set up the wifi (from scratch) so that when it finds an unsecured network it will automatically use it for the internet.
Sorry if there's already a thread on this but I really can't find it. Cheers guys
-Mike
just what i need as well, i have just bought a wifi router so i can use the internet on my xda2s.
using the wireless manger -> wireless LAN manager i get:
STATUS: connected to network
SSID: NETGEAR
TX RATE: AUTO
MODE:INFRASTRUCTURE
CHANNEL 11
BSSID: 00-09-5B-D7-DC-2A
MAC: 00-09-2D-0B-C0-A6
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
if anyone has a any ideas it would stop me pulling my hair out.
Sorry to hijack this thread
mike freegan said:
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
-Mike
Click to expand...
Click to collapse
Mike, I dont think the wifi first and GPRS next works. It doesnt work properly on mine either. If I try a internet access via gprs and a local wifi is readily available, the system does not automatically switch to local wifi.....I think this could be a microsoft issue than a xda issue.
robboy said:
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
Click to expand...
Click to collapse
when u pull out the ethernet cable from the back of the router, can you still surf the net from you xda or PC?? that seems odd. So either you are not connecting to "your" own router, or someone else has a same router with unsecured setup and you were locked onto their service....if you follow what I mean. what happens if you kill the power to your router? you should definitely notice that the wifi service disappear in your xda and PC.
Dont expect a router to disappear by simply unplugging the ethernet cable, if the router is powered up, it will show up on your xda and the PC although obviously there will be no internet access.....
sorry if i wasn't clear. i meant i was still receiving a signal from the wifi router. i could never use the internet on the pda
update:
i can browse my pc files wirelessly using resco explorer, using the standard file explorer i can view the pc files using \\network/c and i have finally been able to connect to activesync.
however i still can not connect to the internet.
Any ideas, from looking on this forum it seems lots of peeps are having problems with this but nobody seems to have the answer
XDA Wi-Fi Solution....It Works!!!!
Hi,
I'm new to the forum and new to XDA2i (presumably XDA2s is same!) ....
I too had many frustrations connecting the wi-fi...but now I've cracked it, here's how.......
On first very first use (or following a hard re-set) device users are prompted to choose “What do you want WLAN to connect to?” The option bullets are ‘Internet’ or ‘Work’….’Work’ should be selected, this will connect them to the nearest WLAN (if this network is WEP encrypted it should be switched to ‘Open’ rather than ‘shared’ as is often the case).
Next prompt asks for any WEP Encryption ‘Pass Key’ to be input, when doing so omit any ‘-‘ between character pairs. Normal start-up should then be completed. Once device is up and running…..
From ‘Start’ pull-down on the ‘Today Screen’ select…. ‘settings’>’connections tab’>’connections icon’>’advanced tab’>’Select Networks’> pull-down ‘My Work Network’ > ‘OK’ out of selections to save and exit.
Go to ‘Wireless Manager’ in programs, select WLAN icon from main screen (which should turn green to show active), then select mini ‘WLAN’ icon from lower toolbar to see the status of the connection, quality of signal etc.
That did it for me......
Cheers
windupmerchant
i'm trying to connect to my home network. It see's it and connects to it... but then straight after it connects to it it totally disconnects and the wifi is turned off... what could be the probelm?
Did the problem persist after soft-reset? If yes, did u install any profiles manager (like phoneAlarm etc. which u can switch wifi on specific time) or did u changed any wifi settings using advanced config/hdtweak/similar apps?
I have an issue with wifi where when i use my works wifi it connects and then should i check IP it clearly shows the works network, however...
when at home and connect to my home wifi it still says connected however when i check my network IP the browser is clearly using the t-mobile 3G internet.
It's baffling to say the least. I've tried closing browser, changing order i open connections etc but to no avail.
Any thoughts?
Hey guys,
I was wondering if anyone knows a way to define a priority on the connection to use based on whats currently available, i.e First go for USB (laptop) if available, if not then WiFi if available, then 3g, gprs etc...
Thanks in advance
umm?
if you're connected to your laptop through Active Sync, i'm pretty sure that automoatically will make your phone use your computers internet.
If Wifi is on, that should automatically take priority over your phone's data service. If it doesn't, just disconnect the data service in the Comm manager.
So yeah, what you want is already an implementation of WM.
Hello,
I want to use portable Wi-Fi hotspot on my phone to connect to my laptop in places where public wi-fi is not available, or to connect to two computers to each other. And it seems to be working.
But I have a problem. I do not want to use mobile network to access Internet for those computers. I want only to exchange data between phone and computer, or between computers themselves.
But every time I switch on hotspot, 3G connection switches on automatically, even if it is switched off on purpose. I know this is intended use of hotspot, but I have a question:
Is there a way to prevent phone switching 3G network on in wi-fi hotspot mode, or just preventing data traffic over 3G?
Or I am missing the point completely?
The application is not intended for such usage; all it does is route traffic between connected wlan-clients and the carrier's apn. The phone itself has the ip-address 192.168.1.1 during this setup, but it is not listening on any ports that would be useful for your setup (ie 'cifs/samba').
LeeCHeSSS said:
The application is not intended for such usage; all it does is route traffic between connected wlan-clients and the carrier's apn. The phone itself has the ip-address 192.168.1.1 during this setup, but it is not listening on any ports that would be useful for your setup (ie 'cifs/samba').
Click to expand...
Click to collapse
I do not know if I do understand you but here are the facts:
I connect two dell laptops to portable wi-fi hotspot on my wildfire s:
one is : 192.168.1.135
other : 192.168.1.185
I can ping one from another. If I share a folder in one (.135) and go to others(.185) "Search for computers or people" I see all files in shared folder and can do all the usual operations over them (edit, move...)
Also if I install Remote Web Desktop from Market on my phone I can access phone through web interface.
In a word, I can do all things as on "normal" wi-fi network ( and I promise it is the only network around here ) except all the time I have 3G switched on. And I do not want to do that because I see my network data traffic going up.
So, as I see things, my only problem is unwanted 3G traffic.
Help?
Ah, but you did not mention that you had installed a seperate application to open up a port for the webinterface.
This however does not change the intended usage for the mobile wifi hotspot application!
hey...you can try this:
1. go to your mobile network settings
2. create a new APN, a dummy one
3. set the new APN as default
4. launch your wifihotspot
I did not test it with 2 pcs but, when u launch wifihotspot, 3g no longer comes on and my pc still connected to the wireless network without any problems.
Let us know your results
Cheers,
Hey,
I ran more test on this issue. The previous posted solution works like a charm.
I was able to use the wifihotspot as a wireless access point:
1. 2 or more PCs can communicate with each other (browse folders)
2. If one of the PCs has internet access, it shares to the rest of the PCs
3. If one of the PCs has an ethernet connection to a server, all other PCs also get connection to the server
For 3. to work, you will need to brigde the local area connection with the wireless connection on the PC that has cabled ethernet connection. Also browsing folders will work only if you use \\server ip (\\servername does not work).
I will try getting DNS access via the hotspot later.
Hope this helps
I connect my phone to several wifi clients & wanted to know if there is a way to create a widget/shortcut to connect it to the appropriate client without having to do it from the settings menu?
And while I'm at it is there a way to remove any unneeded wifi listings that show up? Example my phone will pick up all my neighbors wifi signals & since I have no need to connect to them, there really is no need to have them show up.
As of now my phone is picking up 8 wifi signals from my surrounding neighbors. The only option is "connect" but nothing for "forget"
Anyone?
I was able to create a shortcut to Wifi settings itself, but I would like a widget or shortcut on the home screen for each as follows:
Wifi Home
Wifi GoFlex Satellite
Then I can simply press on whatever widget/shortcut I need & connect to that particular network.
I can't be the only one with this request (Or am I?)
Well I guess it can't be done. I've searched all over the net & nada.
If you have multiple Wifi access points remembered in your settings, you can turn on Wifi with the notification toggle and just let it auto-connect to whatever is closest.
If that doesn't work for you, try Tasker. You can set up automated connections (depending on your nearby cell tower), a menu of options, or other methods. It'll cost you a few dollars, but given all of its other functionality, it's well worth the price.