2.3.4 on rooted r800x - Xperia Play Q&A, Help & Troubleshooting

ive unlocked and rooted my US verizon play back when it first became possible, never relocked it. but now im looking to get the 2.3.4 update on it and cant find where to start. i saw the nordic rom but nothing about it says i can use it on my r800x without brick. im hoping to not have to unroot/update/reroot again. what ever happened to being able to update before any ota via roms and CCW. i dont even know why i have CCW on my play anymore because ive found nothing flashable.
thanks

Dominus11 said:
ive unlocked and rooted my US verizon play back when it first became possible, never relocked it. but now im looking to get the 2.3.4 update on it and cant find where to start. i saw the nordic rom but nothing about it says i can use it on my r800x without brick. im hoping to not have to unroot/update/reroot again. what ever happened to being able to update before any ota via roms and CCW. i dont even know why i have CCW on my play anymore because ive found nothing flashable.
thanks
Click to expand...
Click to collapse
There are versions of the FreeXperia ROM that work for CDMA (R800x), and the older DoomLord kernel works on the R800x also. Those are flashable. Further, R800x does not have a 2.3.4 update yet. We are just now getting 2.3.3 via the OTA.
As to applying the update, I would wait until there is a verified flashtool file that can be applied for those of us who are unlocked. Otherwise the process is to relock (and wipe the device) update, unlock (wiping the device again), and then load root binaries back in via a temp-boot of CWMR (ClockWork Mod Recovery).
I'm not particularly certain what you are referring to as CCW. As far as to update before any OTA via ROMs, well that is when you have leaks. There haven't been leaks for the firmware or updated stock bits for us. SE is usually pretty close to the vest on their stuff.
So, are you complaining because you didn't bother to look or search out any of this information, or are you pissed because you don't have leaks and a larger dev community for your device? We have a niche device. The R800x is an even further minor variant amongst an already niche device on a hardware manufacturer that largely doesn't get much attention. The devs are doing some awesome work considering what they have to work with. Further, all this development isn't free. It costs somebody time and often money. Have you chipped in to the cause? Bought one of the devs a beer?
I fail to see any legitimate issue you are bringing forth.

im sorry i did not mean to come off as ungreatfull or complaining for that matter. i appreciate the dev work done with this device and couldnt ask for a better community. what i am merely looking for is if there is something clear cut and easy before i start trying the not so stable roms on my daily driver. also by ccw i meant cwm somehow haha (clockworkmod incase i didnt abbreviate right again).
further proving my point, through all the threads that i had read before posting this i had gotten the general assumption that 2.3.4 was available in the US and therefore for my device. i started this thread to clear up such issues as this before bricking my device by trying anything i may have though was CDMA US, (whether country or region matters i dont know yet?) because my device version is less popular i need to be very cautious in that matter.
i thank you for your help, and would appretiate further clarity and help navigating the forum for my device.

Dominus11 said:
im sorry i did not mean to come off as ungreatfull or complaining for that matter. i appreciate the dev work done with this device and couldnt ask for a better community. what i am merely looking for is if there is something clear cut and easy before i start trying the not so stable roms on my daily driver. also by ccw i meant cwm somehow haha (clockworkmod incase i didnt abbreviate right again).
further proving my point, through all the threads that i had read before posting this i had gotten the general assumption that 2.3.4 was available in the US and therefore for my device. i started this thread to clear up such issues as this before bricking my device by trying anything i may have though was CDMA US, (whether country or region matters i dont know yet?) because my device version is less popular i need to be very cautious in that matter.
i thank you for your help, and would appretiate further clarity and help navigating the forum for my device.
Click to expand...
Click to collapse
Heh, my apologies for rolling out the lynch mob there.
Truth is, that I do believe that 2.3.4 is available (in minor amounts) as an OTA in North America (R800i on AT&T I think, maybe Rogers or otherwise as well, not sure). However there is no 2.3.4 release yet for Verizon/R800x. We just got 2.3.3 on OTA, and haven't found a verified extract for the OTA yet so that we could just get the system.sin and kernel.sin to flash only using fastboot/flashtool/etc.
Basically you have to be very careful if you are using the R800x that you don't flash using a R800i or R800a firmware or release. If you flash only the system.sin from the package, you would be fine (but with no phone calls, data, etc), but if you did the entire restore, you would brick your phone due to it modifying the TA/Bootloader in ways that are very unfriendly to the R800x.
As far as CWM (ClockWork Mod Recovery), don't try and flash it to your system. It is included in the FreeXperia ROM (CM7 variant), but otherwise just use the fastboot boot image edition if you want to flash things in and not have to do it by hand. If you need a link to that, I can probably dig it up for you. Just don't flash it ^_^
As far as Rom Manager by Clockwork, on this phone it is largely useless at the moment unless you have FreeXperia as your ROM. If you are stock, you don't need it.

thank you very much I will be looking around and doing one further research on this. I will also be posting back into this thread if you don't mind staying subscribed. Hopefully we can bring out the true potential of these devices in short time

Related

[Q] Xperia Play Beginners guide?

Hey guys! I'm picking up an Xperia Play in a couple of days and was looking for some general advice about the phone. This will be my first Android device, I've been on WebOS/Garnet for my last two phones. I'm just a little overwhelmed with the options presented by the Play and Android in general. For instance, I'm not sure if I should root my phone or not - what are the advantages?
Any other general guides to Android/the Play would be wonderful if any such guides exist. I'm looking to deck this thing out with every emulator on the market as well as get the PSXperia hack up and running (I've downloaded the program, but can't figure out how to use it).
You can sense my overall noobishness in general, I'm sure. Any advice or tips about this device would be great. I'm really excited about the Play and getting comfortable with Android. Thanks everybody!
kershner25 said:
Hey guys! I'm picking up an Xperia Play in a couple of days and was looking for some general advice about the phone. This will be my first Android device, I've been on WebOS/Garnet for my last two phones. I'm just a little overwhelmed with the options presented by the Play and Android in general. For instance, I'm not sure if I should root my phone or not - what are the advantages?
Any other general guides to Android/the Play would be wonderful if any such guides exist. I'm looking to deck this thing out with every emulator on the market as well as get the PSXperia hack up and running (I've downloaded the program, but can't figure out how to use it).
You can sense my overall noobishness in general, I'm sure. Any advice or tips about this device would be great. I'm really excited about the Play and getting comfortable with Android. Thanks everybody!
Click to expand...
Click to collapse
congratz im waiting for mine is the mail right now lol
rooting allows you to have full access to the file system sorta like a administrator
on a windows machine since out the box you cant edit files or remove bloatware without root you cant install certain programs from the market without root
also having root and unlocked bootloader allows you to flash a custom recovery image which will allow you to flash customs roms(a custom version of android dev by a user here on xda or anywhere in general)
yes i highly recommend but if you ever plan on returning the phone to verzion for example you will have to revert it back to stock
and for the program psxperia you need to install the latest version of java from java.com
and if your on a windows machine you double click the psxperiatool.JAR file
and it should run not sure on OSX
in the end you made a good choice on choosing android as mainstream as it became its still a powerful system way better IMO than ios or even webos
since android has so many developers theres gonna be an endless amount of programs
will post new finds myself etc
edokassiah said:
and unlocked bootloader allows you to flash a custom recovery image which will allow you to flash customs roms(a custom version of android dev by a user here on xda or anywhere in general)
Click to expand...
Click to collapse
You cannot flash the recovery image directly or you will mess up boot partition, you need to flash a kernel with embedded recovery built in
Thanks for the info. I'm confused about the locked/unlocked bootloaders. How do I know which one I'll have? And how "easy" of a process is rooting the phone if I don't plan to install any custom roms or anything?
Also, how does transferring .apk files from my PC to the device work?
kershner25 said:
Thanks for the info. I'm confused about the locked/unlocked bootloaders. How do I know which one I'll have? And how "easy" of a process is rooting the phone if I don't plan to install any custom roms or anything?
Also, how does transferring .apk files from my PC to the device work?
Click to expand...
Click to collapse
If you havent unlocked your bootloader yourself it is locked there are many risks and advantages to unlocking your bootloader, but if you dont intend to flash custom roms there really is no need, just like with root, if you dont know what it is, you probably wont need it
transfering .apk's from your pc is easy, just copy the .apk to your sd card, then use a file manager to find the .apk, tap on it and the installer will pop up , you need to tick unknown sources in settings though
http://forum.xda-developers.com/showthread.php?t=1176367
AndroHero said:
You cannot flash the recovery image directly or you will mess up boot partition, you need to flash a kernel with embedded recovery built in
Click to expand...
Click to collapse
hes asking about android in general not aiming specifically at the xperia play
If I root my phone, do I have to switch everything back in order to get updates? All I really want to root my phone for would be to remove bloatware/speed it up a bit, is there a better way than rooting?
There is plenty of tutorials here, I suggest that you read, read, and then......read some more
_terror_ said:
http://forum.xda-developers.com/showthread.php?t=1176367
Click to expand...
Click to collapse
Thanks so much for this link, it's seriously going to help me while rooting my phone. This might be a dumb question, but bear with me - better safe than a bricked phone. The guide to rooting in that link says that I need to flash my Play to the .184 Generic UK firmware...am I understanding it correctly that I need flash this firmware onto my American Verizon Play? I want to make sure nothing is going to get screwed up regionally, as I'm going to want to keep getting OTA updates and all that.
Just to share my own experiences since I'm new to the Xperia Play (previously had an Acer Liquid.. crappy hardware but great community of devs.. anyways..)
I'd recommend rooting your phone off the bat - the simple reason is rooting will involve wiping your phone's data, so if you already have a few months of use that means having to restore everything which is tiresome. First thing when my phone arrived was follow the rooting guide here - http://forum.xda-developers.com/showthread.php?t=1116090
After that however I wouldn't recommend messing around TOO much with custom firmwares and such etc.. get used to the phone as it is and figure out what you like, don't like. if your like me within a few weeks or months you'll want something new - this is when you might want to start looking at messing around with the phone - new home launchers or even a new ROM (if your phone can have it's boot loader unlocked, from what I understand mine can't). The games and Emulators should keep you busy as is
The only customizing I've done to my phone is rooting it with Gingerbreak and using the leaked Sony Launcher.
I realize this is a pretty nooby thing to do that annoys all the veterans, but I consider this to be a fairly crucial piece of information I need before I attempt to root my phone, so I'm just gonna go ahead and bump this thing before it gets lost in the shuffle.
In order to root with a locked bootloader on an American Verizon XPlay, I need to flash to the .184 generic UK firmware, then root, then OTA update, correct?
kershner25 said:
I realize this is a pretty nooby thing to do that annoys all the veterans, but I consider this to be a fairly crucial piece of information I need before I attempt to root my phone, so I'm just gonna go ahead and bump this thing before it gets lost in the shuffle.
In order to root with a locked bootloader on an American Verizon XPlay, I need to flash to the .184 generic UK firmware, then root, then OTA update, correct?
Click to expand...
Click to collapse
No. That method will not work on the r800x (verizon xplay) to root yours you will need to see [How-to] R800x Root
Dont worry about annoying people lol . Who cares what others think? Everyone has to start somewhere.
But it would be better with a stickied thread for new users to look @.
So now, instead of the 3 step process linked previously in this thread, I have to unlock the bootloader and do a whole bunch of other stuff? This method is like 100x more complicated. Is there no other way? I don't intend to install any custom roms, I strictly want to root solely for freezing bloatware.
No i dont think so. You would be better asking for help from other r800x owners in that thread.
The exploit gingerbreak uses on 2.3.2 was patched in 2.3.3 (worldwide) and was also patched by verizon before they released the handset on 2.3.2. Up untill the bootloader was unlocked on the r800x rooting was not possible.
Ask in that thread and you should recieve the help/info you are after.
hiya mate right ive rooted and put on custom recovery but now its screwed up my cam , wifi , and the market so be warned im trying to fix this problem as we speak
---------- Post added at 10:32 PM ---------- Previous post was at 10:27 PM ----------
im new to this to really but having a play with no cam and no wifi and no market. the market is there but cant dwnload nothing is taking the piss can anyone help me please
Mozza2k11 said:
But it would be better with a stickied thread for new users to look @.
Click to expand...
Click to collapse
There is one already stickied in the Q&A section.That it has gone practically unnoticed counters this statement.
kershner25 said:
Thanks so much for this link, it's seriously going to help me while rooting my phone. This might be a dumb question, but bear with me - better safe than a bricked phone. The guide to rooting in that link says that I need to flash my Play to the .184 Generic UK firmware...am I understanding it correctly that I need flash this firmware onto my American Verizon Play? I want to make sure nothing is going to get screwed up regionally, as I'm going to want to keep getting OTA updates and all that.
Click to expand...
Click to collapse
Their is not such thing as a bricked phone
always is a way to fix it and usually its as simple as flashing a FTF
or whatever stock rom your device uses takes like 5 minutes tops lol
and logsemans guides will tell you anything you need to know
just use them for refrence
Xperia Play Super Compilation (Q&A Sticky)
and if you head down the path of rooting and stuff
messing with files
you wont be able to get ota updates lol.
it will "brick you"
I recentally made a quick video with tips for android users/beginners if you want to watch it. Thought it would help people. http://youtu.be/Pd5DerUoEcY

[Q]Want to ROOT & REMOVE ICS upgrade & go BACK to Gingerbread..???.

Hi Everyone!
I have an Xperia Arc that I got through Rogers. It had been running Gingerbread 2.3.4 and the ICS update didn't arrive until a year after I got my phone. I read that it wasn't really recommended to do the ICS upgrade even though it had become available (according to Sony). I had been waiting for SO long to check it out that I took my chances on the 50/50 good bad reviews on it and went ahead with the ICS update when Sony/Rogers released it.
BIG MISTAKE.
At first I didn't think it was that bad - but now after having it for a few months- I HATE IT. My phone runs like S***. It's slow laggy.
I had been wanting to root my phone for a long time (I want to get rid of all the bloatware software and be able to use firewalls and tweak CPU speed).
I was all ready to root and use a custom ICS ROM - but I thought about it and I would rather have GIngerbread back on my phone. My phone was awesome when it had Gingerbread and all I ever want to do now is smash my phone - it just can't run ICS properly.
So here is what I want to do:
1. Root phone - I have already downloaded FLASHTOOL, and the DOOMLORD V4 Rooting tool.
2. Flash phone and get RID OF ICS
3. Install a custom ROM
I just need a bit of help.
I need clarification regarding the ADB Drivers.... I have read in numerous places that by just having the up to date Sony PC Companion that you will have the ADB Drivers needed - and I already have the most up to date Sony PC Companion.
I also need some tips regarding ROMS and KERNELS. I understand they are different and they have to be compatible but when I was originally getting all my files for ICS all I found was a kind of 'all in one' - maybe I was confused - and this is why I need some clarification. Do I need to have a separate ROM and KERNEL otherwise then what do I do?
THANKS!!!! rEBECCA
ObscureDreamer said:
Do I need to have a separate ROM and KERNEL otherwise then what do I do?
THANKS!!!! rEBECCA
Click to expand...
Click to collapse
Click the first link in my sig, read it, then come back and ask about anything you're still unsure about.
XperienceD said:
Click the first link in my sig, read it, then come back and ask about anything you're still unsure about.
Click to expand...
Click to collapse
Thank you for your quick reply. I had actually already read it. I DID read it again though... I picked up a bit more knowledge from the 2nd read but it still didn't clear up a few things.
I'm still not clear on the ADB drivers, I saw all the tutorials about ADB for noobs etc but I'm reading on a LOT of places that just having Sony PC Companion installed and up to date will have the ADB drivers...
I should also let everyone one know that my phone is a ROGERS phone, so my bootloader is LOCKED. I have figured out that there are some ROMS that will work on a LOCKED (carrier (rogers) bootloader.
I currently have Android 4.0.4 (I did the update when it came avail to me and I regret it - i really need gingerbread back) I would also like a rom that doesn't have all the Rogers 'bloatware".
All I want to do is undo the stupid ICS update I did and get rid of that HORRID Rogers bloatware!
Through all my reading over the last while I've learned of 'omnius' - I guess it will unlock my bootloader, root, flash and do lots for my phone. Anyone else recommend this for my situation?
Flash a stock GB ftf and go from there, which will debrand your Phone in the process.
Sent from Myushi

[Q] Is my i927 partly-unlocked? (wanna update to ICS, hence asking)

Well, first things first...
I am a noob, and this is the first time I am using an android phone (moving from the Nokia N97 and Nokia C6). So please be patient (and tolerant).
The dealer I got this phone from wasnt sure if it was soft-unlocked (the ones which get locked if you update OS) or otherwise, and he most certainly didnt have (or give me) the unlock code.
The phone has been a delight for the past 3 months, and I love the the stunned look on the faces of everyone around, when I slide open the keyboard!! However, after doing a google search I discovered that there's an ICS update for the i927. And that has resulted in me googling to find out the likelyhood that my phone will re-lock to ATT.
To my surprise (or inability), I couldnt find a definite answer/guide as to what users of unlocked i927s, who do not have the unlock code, should do exactly, to "safely" update to ICS.
I have downloaded most of the tools (Odin 3.07, EFS 2.0.7 and the "I927UCLJ3_I927ATTLJ3_ATT" stock from samfirmware). And I had KIES and the drivers installed from day 1.
But the problem is that I dont have a road-map. Or a troubleshooting guide, in case I encounter unanticipated errors/crashes.
The other thing is uncertainty about the phone getting "re-locked". Some mobile repair guys say I should flash the update with my eyes closed (it wont re-lock to ATT, they say). However, the other side disuades me, and I have yet to find an across-the-counter shop which will give me an unlock code.
Of course, I think I can live without the update if I have to. But, I was hoping for a bit of help (or a step-by-step or link-by-link guide).
The other thing I want to know is whether flashing the ATT ICS update can also corrupt my IMEI details (and hence the need to back up with EFS)??
Finally, I would like mention that my phone is an un-rooted i927 (ATT) running Android 2.3.6.
Any help would be really be appreciated.
Not sure what to make of this..
The lack of replies has made me (even more) doubtful if a noob like me would be able to update my i927. I hope someone can tell me if my i927 is "updateable" or is the ICS update preferably for only the "authentic" i927 handsets??
sachnadkarni said:
The lack of replies has made me (even more) doubtful if a noob like me would be able to update my i927. I hope someone can tell me if my i927 is "updateable" or is the ICS update preferably for only the "authentic" i927 handsets??
Click to expand...
Click to collapse
If you have a SIM card from something not using the AT&T network, put it in. That will tell you if your phone is SIM unlocked or not (I think that's what you're asking).
In theory, applying the ICS update may re-lock your phone; it depends on how it was SIM unlocked in the first place.
My recommendation is:
1) Update to ICS (it's worlds better than GB)
2) If the phone re-locks to AT&T, then just buy and unlock code for a few dollars
phone's current status
scotte9999 said:
If you have a SIM card from something not using the AT&T network, put it in. That will tell you if your phone is SIM unlocked or not (I think that's what you're asking).
In theory, applying the ICS update may re-lock your phone; it depends on how it was SIM unlocked in the first place.
My recommendation is:
1) Update to ICS (it's worlds better than GB)
2) If the phone re-locks to AT&T, then just buy and unlock code for a few dollars
Click to expand...
Click to collapse
I am already using a local SIM card on the phone (Airtel) since the day I bought the phone. All the features are working on the phone, except the WiFi tethering, which is also the biggest reason for my doubts (and reluctance) about flashing the ICS update. The WiFi tethering feature does not recognise my Airtel data connection (2G), making me to believe some features are still AT&T specific (like the ringtones feature).
The other thing is, re-locking is a significant concern, but its not the biggest concern (for me). Since I first visited the "Captivate Glide" section on this forum, I have read about problems like the IMEI number (or other important phone data) corrupting, bricking my phone (which I know no one in the world can guarantee against), or the phone getting stuck in the start up mode (read it somewhere here, although I dont know if it was an OS update related failure).
Anyways, I hope that clears up the current status of my i927, and thanks for replying.
A bit more help please...
I know I asking basic noob questions about updating, but I was hoping for a bit more guidance actually...
Like what do I do with the I927UCLJ3_I927ATTLJ3_ATT.zip file?? Do I unzip it, or just copy it the phone memory and reboot into Odin??
The other thing is I started the EFS app on my PC and connected my phone to it, but the IMEI and other numbers are just all 0s. So, I am thinking, I did something wrong there as well...
I am well aware that no one in the world can guarantee against bricking a phone. I just want to have a proper guide on how to update, so that I have the best odds possible
sachnadkarni said:
I know I asking basic noob questions about updating, but I was hoping for a bit more guidance actually...
1. Like what do I do with the I927UCLJ3_I927ATTLJ3_ATT.zip file?? Do I unzip it, or just copy it the phone memory and reboot into Odin??
2. The other thing is I started the EFS app on my PC and connected my phone to it, but the IMEI and other numbers are just all 0s. So, I am thinking, I did something wrong there as well...
I am well aware that no one in the world can guarantee against bricking a phone. I just want to have a proper guide on how to update, so that I have the best odds possible
Click to expand...
Click to collapse
1. It seems you're trying to upgrade your Glide via Odin. Unzip the zip, get all the files, put them in Odin folder (NOT the SD card, Odin is a PC-based tool) in the forums to proceed.
EDIT: Google is man's best friend. This is the Odin guide I followed when just a week ago I'm still new to my Glide: http://androidromupdate.com/2012/11/10/i927uclj3-new-ics-4-0-4-for-samsung-sgh-i927-captivate-glide/
2. Your EFS may already be dead Or I don't know, never used that tool before.
Sent from Samsung Captivate Glide @ I927UCLJ3
Okay I'll still advice you use the efs tool to. Back up your efs foder,then put your phone in download mode, using Odin flash the stock ICS ROM when its through flash any of the recovery through Odin again then allow the phone to reboot. you can now flash any of the ROMs I prefer the lite ROM anyways.
Good luck.
Sent from my SGH-I927 using xda premium

[Q] Xperia Play r800at Troubles

Hello, I was posting here because I've been having a great deal of difficulty really getting anything done with it. What I'd like to do is either unlock the bootloader, or at least root it to my computer to flash on a new ROM.
In order to root it, I was told to put it in MSC mode, allow unknown sources, and enable USB debuggin, all of which I've done. However, when I go to root it using either SuperOneClick, Doom method, or flashtool, I continually get errors, either saying ADB server is out of date, killing..., or in the case of the doom method that it cannot write any files because they are read only. Somebody mentioned you an overwrite your r800at with an r800i rom to make this work, but the link in that thread lead to some virus (I assume it was taken down a while ago). I put it to a stock AT&T ftf, and still no luck.
My problem lies in the fact that some of the threads I'm looking at are YEARS old at this point, most of the links are dead, and some of the advice is contradictory. I figured then that I could just get somebody to unlock it for money, but all the threads point to alejandrissimo, who I believe is now inactive.
All I would like is to root my phone and put on a new rom, preferably of ICS, with minimal difficulty. I've sunk something like 10 hours into it at this point, and now am the proud owner of a phone with the exact same firmware I started with. I've wiped my contacts like 8 times, and to be honest I'm just getting frustrated with the whole thing. I hate the idea of having bloatware all over my phone though.
So if anybody knows a good way either to root the r800at (and if possible could provide active links to the software), or somebody I could pay to unlock it and skip all this work, I'd really appreciate it.
Thanks for reading, have a good one.
I can't help you with unlocking bootloader (i have r800i with unlocked bootloader), but maybe i can help you with root
You didn't say what firmware are you using, but in general use Doomlord's zergrush method v4 for firmware .42 and below or Eroot on newer firmware (it's on chinese but it have one big button with word "ROOT" on it :silly: )
That is only for rooting and with that you can debloat stock firmware or use ROMs for locked bootloader.
SWM_installer V5 , should work on locked bootloader (once you get root) so you can flash custom GB roms.
To be able to install ICS/JB/CM/MIUI ROMS you must unlock your bootloader because they all don't work on stock GB kernel, and you need unlocked bootloader to be able to flash custom kernels
Here is some links, but i hope R800a users can help you more with unlocking bootloader
Xperia Play Index - ROM'S, FIRMWARE, KERNEL'S, GUIDE'S, THEMES, MOD'S
[MEGATHREAD][GUIDES][18th Dec][4Noobs] All My Tutorials!
Cyanlabs ROM Kitchen & Windows Helper Application
Thanks
First, thank you for the very informative response. Here's some additional info, I am not sure if it will be helpful to you
My current Android version is the stock AT&T 2.3.3 and my build number is 3.0.1.b.0.285. I'm honestly not sure which of these things is helpful, but I'll try that Chinese rooting method. Got a long work shift tonight, but I'll report back later.
Thank you so much, I really do appreciate it!

Info regarding what can be flashed to VZW M9's

Hey guys, this is my first HTC device. I've been reading through the threads here and in the intl forum and I just wanted to get a little info in one place as to what we can flash for this device. I sent mine off to someone with a Java Card, so now that I'm good to go, I wanted to see what all I (and other VZW users) can do at this early stage in the game. I know that until there is an easier way to S-Off/root/etc than sending your device to someone it is still kinda rocky as to development on this particular device, but I've heard mixed reviews on what ROMs/kernels are good to flash.
I assume that as long as I've got a custom recovery, flashing ROMs on this device would be the same as the other devices I've used... just pick the file in TWRP and flash, right?
As far as ROMs go, I've read that ViperOne works, along with InsertCoin with nothing extra.. just flash and go apparently. As for other ROMs, a little editing and some files from the stock VZW ROM should make them work, right? What files exactly would be needed?
Basically, if you've flashed anything, post your results here. What works, what doesn't, anything I should do before I start flashing myself. Any good threads I should read before I jump in. Thanks guys!
I have a thread about the roms in this forum named VZW M9 roms.
Basically the ones you've named I've tried with success. Also LeeDrOiD rom added Verizon support today. Build 7.5.
jtommyj said:
I have a thread about the roms in this forum named VZW M9 roms.
Basically the ones you've named I've tried with success. Also LeeDrOiD rom added Verizon support today. Build 7.5.
Click to expand...
Click to collapse
I never claimed to be a genius I've read through your thread, that's where I got the ROMs that worked... My brain wasn't working at full capacity when I made the thread. Thanks.
That being said though, lets assume that a soft-brick occurs. How would one go about fixing that? In my experience with the S4 and the device I had previous to that, it was simple to fix a soft-brick as long as I still had recovery access. Would the same be true for the M9? What about reverting to stock.. as in stock recovery, firmware, etc. Also, from what I've seen, adb tends to be used a bit more for this device than others that I'm used to. Not that I have a problem with it, I just haven't used it very much and will likely have to brush up a little bit on the nuances of it. I just don't want to create a $650 paperweight so I want to be absolutely sure that what I'm doing can be fixed, and that I avoid doing things that CAN'T be fixed.
lordcheeto03 said:
I never claimed to be a genius I've read through your thread, that's where I got the ROMs that worked... My brain wasn't working at full capacity when I made the thread. Thanks.
That being said though, lets assume that a soft-brick occurs. How would one go about fixing that? In my experience with the S4 and the device I had previous to that, it was simple to fix a soft-brick as long as I still had recovery access. Would the same be true for the M9? What about reverting to stock.. as in stock recovery, firmware, etc. Also, from what I've seen, adb tends to be used a bit more for this device than others that I'm used to. Not that I have a problem with it, I just haven't used it very much and will likely have to brush up a little bit on the nuances of it. I just don't want to create a $650 paperweight so I want to be absolutely sure that what I'm doing can be fixed, and that I avoid doing things that CAN'T be fixed.
Click to expand...
Click to collapse
Well first thing you need to have a custom recovery flashed.
Then you would need to backup your stock system. If you are in a soft brick then volume up and power being held at the same time should get you out of it.
There should not be a need to refresh firmware since the original firmware is all we have. I do believe an Ruu is being worked on currently.
Final word- if you're unsure,don't!!

Categories

Resources