Hello guys, one of my friends was trying to install the cyanogen for first time but after flashing 2.2 it stucked in M logo! and the buttery is unknown ( there is a question mark on the battery logo when he plugs in the charger). he tryed to flash some other ROMs (official 2.2 and other 2.2) but every time there is same problem and just M logo!!!
what can he do? please help... i will really appreciate your help!
seems that your battery is too low on power to flash a sfb so you can try http://forum.xda-developers.com/showthread.php?t=892026 see if it works
ehsan_yany said:
Hello guys, one of my friends was trying to install the cyanogen for first time but after flashing 2.2 it stucked in M logo! and the buttery is unknown ( there is a question mark on the battery logo when he plugs in the charger). he tryed to flash some other ROMs (official 2.2 and other 2.2) but every time there is same problem and just M logo!!!
what can he do? please help... i will really appreciate your help!
Click to expand...
Click to collapse
Try to flash another rom or backup if you get to recovery mode.
Delete the Cache and Dalvik cache via 2ndinit.
Sorry for my bad English!
Julian
did you double wipe?
Wipe data/cache using stock recovery, Flash full SBF.
Sent from my ME525+ using Tapatalk
thanks everyone. we wiped data / catche / dalvic and everything! for more than 5 times!!! but the M logo is still the only thing we can see after flashing several ROMs via RSD Lite...
Sometimes the sequence of flashing is vital to make it right.
I think you need to perfom full wipe follow with flashing new sbf. And talking about sbf, there's some img version of which won't work from higher to lower (sort of downgrading) regardless of the sbf you're using. You must need sbf file of the same img version or higher for the flashing process to success. To get this right, you must know exactly your original rom or sbf you were using.
2ndly your rsdlite might be the culprit here too as some run the flash but never pass or failed at bootup due to incompatible rsdlite version and configurations.
Related
hello
moto defy is my first android device.
i installed the latest 2.3.4 GB on it using this: http://forum.xda-developers.com/showpost.php?p=14925851&postcount=72
It was nice and was working well. but i had to go back to froyo and so, i installed system recovery again on Gingerbread. then i tried to boot through it, but it wouldn't boot to the recovery screen. so i tried to wipe data and cache using the moto recovery. then using the rsd lite tool, i flashed the fixed sbf. then im not able to get into the phone now.
it asks for motoblur setup and when i skip it, it says, The application Accounts(process com.motorola.setup) has stopped unexpectedly. Please try again.
with a Force close button. when i force close, motoblur setup first page comes again.
I even tried to register for a new motoblur account, but no luck it goes to the end and stops. i registered new account on pc and used it on the phone. it goes updating and again the error pops up.
I tired many things like starting from scratch. wiping all data + cache, but no luck. Please help me.
If you flash a fixed SBF you have to replace the filesystem with a nandroid backup.
since you couldn't reach clockwork recovery you should have now a froyo fixed SBF with a file system from ginger... that doesn't work.
You now have the two options to try...
- flash ginger sbf again (clear cache, davlik, factory reset etc. first) trie to boot the ginger-system. After that find a clockwork recovery or 2ndInit for Ginger.
- flash a whole stock rom (full SBF) with RSD-Lite ... if anything has been replaced with original files it should be back...
i tried ginger sbf, the shadow4.5.1-134fixed.sbf. no luck. same thing.
tried downloading again and flashed, still same.
for option 2, if i do so, i would loose downgradability to froyo right? could you just provide me a link for the full sbf? i dont want to do something stupid again. sorry.
If i flash froyo full sbf, will it work?
Edit:
YAY!! i downloaded full sbf and flashed using rsd lite. now im on stock froyo. pheew!!
just in case anyone needs the froyo without blur i.e UAE for dowload: http://forum.xda-developers.com/showpost.php?p=14682923&postcount=1
Just wipe all then reboot, get to bootloader by using vol up+power, flash using rsdlite and again wipe all and reboot.
Hi Folks,
I am privileged to be part of this great community.
I have a issue here. Just yesterday installed CM7 on my defy..
Everything was fine.
Tried [MOD]720p record and play for Gingerbread Stock Roms
tried http://forum.xda-developers.com/showthread.php?t=1154215
installed and ran 2nd-init from here
http://forum.xda-developers.com/showthread.php?t=875233
When I Launched custom recovery the phone got stuck at the Red Moto Logo screen
Till now tried many things
1) Since I am to access the vanila custom recovery I tried Wipe data/ factory rest.
Result: STuck at moto logo
2) Since boot loader is also accessible Tried to flash SBF through RSD LITE.
Result: After flashing the result is still same. Stuck at Moto Logo
Please help me on this issue as I have gone through the forum and couldn't find any solution
Will this solve my issue or is there any other way
[HOW TO] Debranding /Installing different/recovering bricked firmware on your Defy
can I use the lastest full sbf for recovering as I am from India
[SBF] OFFICIAL RE-RELEASE | Android Froyo 2.2.2 SOUTH EAST ASIA + INDIA [RE-RELEASE!]
http://forum.xda-developers.com/showthread.php?t=1093352
http://forum.xda-developers.com/showthread.php?t=853674
Any help here would be appreciated....
go to stock recovery and wipe data and cache..and then flash indian sbf
I can try that but the problem is even though I have wiped data and cleared cache earlier there has been no change.
It is as if the old settings are still there and is not allowing the phone to start.
I think I can only flash with a full SBF right....
I have my nandroid backup. Would that be helpfull anyway.
Thaknks
Just read this thread so I am not sure if I can flash with full Indian SBF
http://forum.xda-developers.com/showthread.php?t=1152377
I earlier installed Nordic froyo + CM7 (followed as it is in the guide and FAQ)
tat thread is for leaked gingerbread only! u can downgrade from CM7 i guess..coz kernel is based on froyo nordic 179
wipe everything..including data.partition and all..and then try...should work..report back..
1.wipe data and cache from stock recovery
2.bootloader -> flash full nordic since this one worked for you earlier (make sure the process is finished)
3. enjoy your defy!
edit: yes, arpith.fbi is right, CM7 uses froyo kernel so no problem at "downgrade".
My doubt is will I should make sure it works this time otherwise I may even loose the boot loader and recovery if I screw up anything.
How will flashing a new Full Indian froyo sbf (Planning to flash the OFFICIAL RE-RELEASE! 3.4.3-36-1.7 ) work since I have many times tried clearing cache, data and partition and still it does not go past the boot screen.
Yes..Flashed with full Indian SBF successfully and then proceeded to MIUI and installed the Beta 1.7.8 version which seems stable as of now.
Thanks for every one who chipped in
Just a suggestion:
Install Zeam Launcher....it moves incredible fast with MIUI
Sure, Thanks. I will give it a try.
I am first trying to get hold of the stock launcher. Even it is beautifull.
Maybe you didn't set the default bootmode to 2nd init.
Go to 2ndinit bootmenu and set default bootmode to 2nd init
Hi, I have been running on Gingerbread CM7 for a few weeks now until today when I attempted to install 2nd-init. After the installation, I rebooted my Defy and has been stuck on the red logo. I tried flashing with an nandroid backup 2.34 sbf but it's still looping on the logo. I've also tried wiping data after flashing and still no luck.
I appreciate your time taken in helping me out of this mess. Thanks.
Wipe Data and cache from Stock Recovery than try to flash fixed SBF through RDS and if that don't work than Flash full SBF....
Sent from my Toilet using Motorola DEFY
ifu said:
Wipe Data and cache from Stock Recovery than try to flash fixed SBF through RDS and if that don't work than Flash full SBF....
Sent from my Toilet using Motorola DEFY
Click to expand...
Click to collapse
I'm sorry, I am quite new to this. But which full SBF should I look for?
nikki3010 said:
I'm sorry, I am quite new to this. But which full SBF should I look for?
Click to expand...
Click to collapse
You mus try 2.2.2 from this thread
http://forum.xda-developers.com/showthread.php?t=966537
Hey, I've managed to flashed back to the Nordic 2.2.2 SBF and everything's fine now. I panicked a little yesterday as I was away on vacation and had no phone to use. But I'm back home now and it's fixed. Thank you all!
So i installed CM 7.1 i think from rom manager but it wouldn't go past the boot logo with the skating droid. so i took battery out and went to recovery mode and i think i accidentally restored one of my Motorola Droid data and now my phone wont go past the Google CM boot logo i think I'm screwed any suggestions? please help. i guess I'm a noob and sorry if there was something similar to this posted already i just can't find the answer to my problem thank you.
additional info:
us - Tmobile
rooted with gingerbreak
2nd init boot-loader
was running perfect until i accidentally restore the wrong data
oh and yes I've tried data wipe not working
Do you happen to have a nandroid backup of your stock rom you've had before ?
A nandroid backup is what you should have created using CWM recovery. Just restore it with CWM.
You don't have a nandroid backup ?
Flash the full SBF of your original stock rom (the one you had before flashing cm7). This should be a 2.2 Froyo whatever rom. Connect defy to pc, open rsd lite, start the phone and enter the bootloader and flash the sbf using rsd lite.
Have you installed Froyo (2.2) before going to Cm7? If not (you still had Eclair 2.1) then this is the problem.
However, get 2.2 on that phone and flash cm7 again following this guide http://forum.xda-developers.com/showthread.php?t=1054447
Instructions for some of these steps can be found here: http://forum.xda-developers.com/showthread.php?t=1216982
Also, be patient! When the phone boots for the first time after a flash that may take a while!
Try wiping data cache partition and Dalvik cache from the custom recovery..
Sent from my MB525 using Tapatalk
tdlr said:
Do you happen to have a nandroid backup of your stock rom you've had before ?
A nandroid backup is what you should have created using CWM recovery. Just restore it with CWM.
You don't have a nandroid backup ?
Flash the full SBF of your original stock rom (the one you had before flashing cm7). This should be a 2.2 Froyo whatever rom. Connect defy to pc, open rsd lite, start the phone and enter the bootloader and flash the sbf using rsd lite.
Have you installed Froyo (2.2) before going to Cm7? If not (you still had Eclair 2.1) then this is the problem.
However, get 2.2 on that phone and flash cm7 again following this guide http://forum.xda-developers.com/showthread.php?t=1054447
Instructions for some of these steps can be found here: http://forum.xda-developers.com/showthread.php?t=1216982
Also, be patient! When the phone boots for the first time after a flash that may take a while!
Click to expand...
Click to collapse
thanks alot for some reason rsd lite would not detect my phone on windows 7.
this is what my phone say at the time
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x000910
DRM Version: N / A
AP Die ID: 2190001435d15e010000d8ff2100
BP Die ID: 0000000000000000000000000000
AP Public ID: 67fb0d892ad966d841afedffd5eda9e7a1261a1a
BP Public ID: 0000000000000000000000000000000000000000
I'm about to just flash froyo since that's what i had hope it works and thanks for the help i appreciate it.
crlx1906 said:
So i installed CM 7.1 i think from rom manager but it wouldn't go past the boot logo with the skating droid. so i took battery out and went to recovery mode and i think i accidentally restored one of my Motorola Droid data and now my phone wont go past the Google CM boot logo i think I'm screwed any suggestions? please help. i guess I'm a noob and sorry if there was something similar to this posted already i just can't find the answer to my problem thank you.
additional info:
us - Tmobile
rooted with gingerbreak
2nd init boot-loader
was running perfect until i accidentally restore the wrong data
oh and yes I've tried data wipe not working
Click to expand...
Click to collapse
hello sir,
i am facing the same problem with my defy. want to know have you got any solution to that. i am having nandroid backup of my froyo rom. but how to install it with CWR when the phone is not even go beyond bootscreen. i am not much familiar with android. its my first android cell. please help me sir.
waiting for ur reply
are u getting any errors while booting up?
Hi there,
My Defy was on Quarx's 0308 CM9 (With CM7 Kernel), when I tried to install Walters Kernel using 4.5.2-109_DHT-22-kernel.zip. After doing this it did not go past the "M" logo upon reboot.
I then read that others had flashed the fixed DHT-22 kernel to fix this issue. I accidentally selected the wrong SBF (JRDNEM_U3_3.4.3-11_BLUR_SIGNED) and I am now stuck in a boot loop. Could anyone please help me figure this out?
Thanks in advance
Can you get into recovery ? , have you tried full wipe , data,catch+dalvik
Sent from my MB526 using xda premium
No can't get into recovery, only into bootloader to flash sbf's.
IgWaBaBa said:
No can't get into recovery, only into bootloader to flash sbf's.
Click to expand...
Click to collapse
I was in your situation last week (stuck at m logo), so i flashed a 2.2 sbf, then rooted, installed recovery and installed ics again with correct kernel,
That is the way i done it, its a long way around but I'm not sure if there is a faster way sorry,
Djc
Sent from my MB526 using xda premium
i have today this problem.
i found china sbf 2.2.2 work on my defy flash root boot cm7 and cm9
Thanks for the response, I'm busy downloading another SBF to try that, will give feedback and thanks, if I prevail!
Ok, I'm back in action. The issue was that I needed to wipe user data and cache using the standard restore (I think that's what it's called). Anyway instead of looking for a SBF that makes it work, I accessed the standard restore by holding volume - while powering up, then wiped user data and cache, which stopped the boot loop after the reboot.
Now I'm back onto CM9
Glad That Worked me too faced alot probs with CM7 and 9