Develop Bugs

2.0 Ghz kernel

Hai Guise!
Back a little while ago the G2/Vision thread (before Desire Z was merged) had a thread about overclocking made by a user named Flippy. I followed it for a while because it was getting insanely out of control and awesome. I had used 1.9Ghz as my max oc for a while and It was great. Now I'm on 1.8Ghz again because the 1.9Ghz kernel was removed later on and replaced with the 1.8Ghz update zip. (For some reason doesn't work for me so I had to fastboot it)
So the reason I made this thread is because I would like to have the 2.0Ghz kernel. I know it's possible and has been done already. I've looked into compiling my own but apparently I need linux to compile it and I'm not fond of installing VM's on my old computer that will barely run as it is.
Now I ask of you, if anyone who is kind enough to possibly please compile a 2.0Ghz zimage for me, I would be greatly in your debt and appreciate it much so! I understand that it is my fault if I mess up my device and only I am held responsible.
Thank you in advanced to anyone kind enough to offer their services.

dietotherhythm said:
Hai Guise!
Back a little while ago the G2/Vision thread (before Desire Z was merged) had a thread about overclocking made by a user named Flippy. I followed it for a while because it was getting insanely out of control and awesome. I had used 1.9Ghz as my max oc for a while and It was great. Now I'm on 1.8Ghz again because the 1.9Ghz kernel was removed later on and replaced with the 1.8Ghz update zip. (For some reason doesn't work for me so I had to fastboot it)
So the reason I made this thread is because I would like to have the 2.0Ghz kernel. I know it's possible and has been done already. I've looked into compiling my own but apparently I need linux to compile it and I'm not fond of installing VM's on my old computer that will barely run as it is.
Now I ask of you, if anyone who is kind enough to possibly please compile a 2.0Ghz zimage for me, I would be greatly in your debt and appreciate it much so! I understand that it is my fault if I mess up my device and only I am held responsible.
Thank you in advanced to anyone kind enough to offer their services.
Click to expand...
Click to collapse
Why do you need to overclock that high? I've used the 1.8Ghz and found that to.be overkill. I'm running at about 1ghz at that seems ample.
Sent from my CM7 powered Desire Z

cjward23 said:
Why do you need to overclock that high? I've used the 1.8Ghz and found that to.be overkill. I'm running at about 1ghz at that seems ample.
Sent from my CM7 powered Desire Z
Click to expand...
Click to collapse
+1
Wouldn't that fry your phone without any active cooling system or something? Sounds unnecessarily risky..

dietotherhythm said:
Hai Guise!
Back a little while ago the G2/Vision thread (before Desire Z was merged) had a thread about overclocking made by a user named Flippy. I followed it for a while because it was getting insanely out of control and awesome. I had used 1.9Ghz as my max oc for a while and It was great. Now I'm on 1.8Ghz again because the 1.9Ghz kernel was removed later on and replaced with the 1.8Ghz update zip. (For some reason doesn't work for me so I had to fastboot it)
So the reason I made this thread is because I would like to have the 2.0Ghz kernel. I know it's possible and has been done already. I've looked into compiling my own but apparently I need linux to compile it and I'm not fond of installing VM's on my old computer that will barely run as it is.
Now I ask of you, if anyone who is kind enough to possibly please compile a 2.0Ghz zimage for me, I would be greatly in your debt and appreciate it much so! I understand that it is my fault if I mess up my device and only I am held responsible.
Thank you in advanced to anyone kind enough to offer their services.
Click to expand...
Click to collapse
You don't need a VM. You need to wipe the garbage off and install linux on the "bare metal".

While it would be *neat* to oc this phone to 2GHz - just because. It would be beyond useless and I can just see some noob burning down their parents house or possibly starting a nuclear war with Russia by accident. Lets not forget your carrier reporting you to the CIA for having a nuclear reactor in your phone.
Look, with no active cooling it's just downright stupid to go that high. However being the genius' that we are I'm sure somebody could devise a method to install a mini fan or some liquid cooling on this phone. But then you may need that nuclear reactor to power all that stuff. Haven't we already set a guiness world record at 1.8GHz on a production phone anyway? Maybe we need to tell them so we can make it in the book

My phone froze at 2Ghz... I went in for 2.2Ghz at first but it froze after a couple seconds

MacaronyMax said:
My phone froze at 2Ghz... I went in for 2.2Ghz at first but it froze after a couple seconds
Click to expand...
Click to collapse
LOL, it didn't make you go back in time or some ****?

The 1.9Ghz kernel caused my phone to crash. 2.0 would burn your phone's processor out. Just use the 1.8Ghz kernel and have the profiles on SetCPU set to the lowest speeds when the display's off.

Your phone may not actually run stable at 2GHz. Mine doesn't run stable past 1.6GHz, and that runs psx4droid *perfectly*, especially with the optimization they've done in the app recently.
Also, even with setCPU profiles, battery drain when you ARE running that high is a beeeotch.

Honestly, it's not really for OCing that high, but rather the look at what I can do I had a friend just ask be how high I can OC my phone and at 1.5GHz he's like woah :O His face at 2GHz would have been like

I previously used Flippy's kernel on my G2 and did OC it to 1.8 GHz, and got a Quadrant score of 3037. It was cool to see how fast my phone could actually get, but I'm more than comfortable with OC'ing it to 1.4 GHz. Anything more than that seems to be unnecessary to me, but that's just my opinion. Last thing I want is to have my G2 melt while it's in the pocket of my pants.

Try the .ko module and overclock that way
Sent from my HTC Vision using XDA App

mejorguille said:
Try the .ko module and overclock that way
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Oh yeah totally forgot that existed. Thank you for the useful response.

tried the module but the phone freezes after doing anything above 1.4ghz
I believe it needs voltage tweaking which I don't know how to go about sooo... yeah

MacaronyMax said:
My phone froze at 2Ghz... I went in for 2.2Ghz at first but it froze after a couple seconds
Click to expand...
Click to collapse
LOL!! Froze? Or more like "fried"!! Hehe
Doesn't it happen to you guys that when running @1.5Ghz u get many FC from some games? Running excessive OC might stop your phone from working.
Why do you need 2Ghz?!

EdWRX said:
LOL!! Froze? Or more like "fried"!! Hehe
Doesn't it happen to you guys that when running @1.5Ghz u get many FC from some games? Running excessive OC might stop your phone from working.
Why do you need 2Ghz?!
Click to expand...
Click to collapse
Nope, not for me anyway. I know different HW revisions and such have an effect on how high you can oc but my phone doesn't skip a beat at 1.8GHZ. I'm sure I could go to 2GHZ or a bit higher but unless I'm trying to emulate a PS3, I don't see the purpose - aside from maybe setting a record.

KCRic said:
Nope, not for me anyway. I know different HW revisions and such have an effect on how high you can oc but my phone doesn't skip a beat at 1.8GHZ. I'm sure I could go to 2GHZ or a bit higher but unless I'm trying to emulate a PS3, I don't see the purpose - aside from maybe setting a record.
Click to expand...
Click to collapse
Same. I can do 1.8 all day if I keep near a charger. Anything over 1.3 will drain my battery like a monster though.
I keep at 1.2 regularly and only go higher for games.
Sent from my HTC Vision using XDA App

EdWRX said:
LOL!! Froze? Or more like "fried"!! Hehe
Doesn't it happen to you guys that when running @1.5Ghz u get many FC from some games? Running excessive OC might stop your phone from working.
Why do you need 2Ghz?!
Click to expand...
Click to collapse
I can jog 1.8 and 1.9Ghz for a day without even reaching a dangerous temperature.
Can I get some supportive ideas and less herp derp personal opinions?

Highest Ive pushed mine is 1.5ghz. No need to go any further, Im satisfied with the performance. I get a full days battery life and the temperatures never get critical (my setcpu profile is set to underclock at 38.2 degrees Celcius but my G2 hasn't gotten close to that). Im curious at what stage my G2 would score 3000+ in Quadrant.

You might PM flippy and see if he will customize a kernel for you that goes that high. Let him know you will send a certified letter signed in blood and a video of you stating you release him of all liability for what ever town you destroy when your phone goes nuclear.
Seriously though, I'm willing to be he'll make it for kicks if you ask nicely - btw, call guiness so you can make it into the record books. Also, I'm not sure but if you flash a 'blank' kernel couldn't you just echo the speed and voltage in the 00banner file or whichever one it is?

Qustion About Overclocking Defy

Hello Everyone
Is overclocking the defy to 1GHz is ok?and by ok i mean stable for a long time....and not for few months and then the phone is dead or something
thanx in advance

Many have been OC-ed to 1 ghz without any issue.
I'm running with 1000/52 in setvsel.

Overclocking doesn't harm unless the voltage is correct and not too much. OC to 1 GHz and see the lowest voltage that you can run stable on. Set it as the setting.
Also, CPU scales as per demand so your Defy will not run at 1 Ghz all the time, only when it requires that muscle...
And CPU's do last a long time, my 8 year old Pentium 4 just refuses to die...LOL

Running the Defy at 1000/52 and 75% with Setvsel. No problems and battery-power for full 3 days including a 6 hour geocaching trail. That's ok.

my defy can handle 1,2ghz long term, so you should be fine with 1ghz just make sure you set the vsel right, setting it too high could damage the cpu, setting it too low causes reboot, but no damage. so you can start by setting it to 50vsel, and if your phone is instable (i recommend setvsel and stability test for testing) set it a bit higher!

ok
thank you so much guys

Seriously no one knows, as no one has been owning and overclocking defy for over half year. But I think 1g is fine. Mine can easily go to 1.4g at 7x vsel, though I'm using 1.2g at 62 vsel.

mine maxed out on 1.37ghz, but im still using [email protected] theres nothing i use 800mhz cant handle, and with undervolting i can seriously lower battery consumption.

Mine is OC'd to 1ghz with Milestone overclock with no problems, and it's super fast also.

(Q)I have a og evo and cant overclock it 1.2ghz.

I have a og evo I want to know why when I overclock to 1.2ghz it freezes my phone why does it do that ?
Sent from my Nocturnal 4G using xda premium

Each Evo is different. Some of them can't handle that high overclock, or can't be undervolted very low. Each one is different, each has its limits.
I don't understand the big deal with overclocking. It burns your battery faster. I personally underclock, with little to no lag and is good enough for my casual gaming needs

Mine doesn't like a clock much at all. I can get about 1.1 before it starts locking up but even then it hangs a lot. I honestly don't see a difference from 1.0 to 1.2. Get a decent rom, good kernel and try out the v6 script an I almost guarantee you will like that better.

beaumontcali48 said:
I have a og evo I want to know why when I overclock to 1.2ghz it freezes my phone why does it do that ?
Sent from my Nocturnal 4G using xda premium
Click to expand...
Click to collapse
Well for us to be able to help you, you would need to provide us with more details on how you are trying to accomplish this.

I use no frils cpu but have also tried setcpu and viperMOD I know that's the best way to overclock but is very confusing. Have any step by step instructions to of to 1.2 I know having higher voltages helps as well.
Sent from my Nocturnal 4G using xda premium
Sent from my Nocturnal 4G using xda premium

Overclocking is overrated. If you need to overclock for every day usage, then something is wrong - at least in my opinion. Resource intensive gaming is different, but you shouldn't need to overclock for browsing, texting, casual games, etc.
Try out the V6 Supercharger script. I'm not currently using it, but have in the past and it seemed to make my phone more snappy. A lot of people swear by it and it's a great script, definitely worth a shot. There are other things you can do to speed up your phone without overclocking. I'd try other options first since overclocking will chew through your battery. Increase the dalvik vm heap size, there are plenty of free apps on the market to help with this task. Uninstall apps you don't use, I'll bet that you never use some of the apps on your phone. Back them up with Titanium Backup and you can restore them if you ever need them again.
In case you didn't already know, the Evo can't overclock past 1.2, I'm not 100% sure why - it has something to do with the processor.
Supersonic Evo 4G | MIUI | Tapatalk

I never oc over 1075 and only when plugged in if i play a game I need to oc.for I just activate my charging profile and plug up and play 1.2 ghz is a good chance of doing serious.damage as these older scorpion processors get very very hot at that clock speed so they lock up to try and protect themselves from heat damage or they shut down the phone 1075 is as high as you should need to go for any games the evo can handle on the subpar gpu
Sent from my Classic-EViLizED-ToMAToFiED-EVo4g-

beaumontcali48 said:
...also tried setcpu and viperMOD I know that's the best way to overclock.
..
Click to expand...
Click to collapse
I'm pretty sure viperMOD is more for undervolting than overclocking, which are not suppose to be combined together. I am running vipermod with max voltages - 50. Other nite was playing snes9x and was getting some lag with a game so I bumped max CPU up to 1.2. Phone went into a bootloop and had to superwipe and reflash everything. Don't know if its b/c vipermod + 1.2 CPU or just bumping up CPU. Didn't try it again.
Support TrevE!!

shift
Get a shift. Mine runs fine at 1.9. But usually run it art 254-1200 on demand.

{ParanoiA} said:
I'm pretty sure viperMOD is more for undervolting than overclocking, which are not suppose to be combined together. I am running vipermod with max voltages - 50. Other nite was playing snes9x and was getting some lag with a game so I bumped max CPU up to 1.2. Phone went into a bootloop and had to superwipe and reflash everything. Don't know if its b/c vipermod + 1.2 CPU or just bumping up CPU. Didn't try it again.
Support TrevE!!
Click to expand...
Click to collapse
You can overclock and undervolt together just fine. You just need to ensure that every frequency has a high enough voltage to run the processor at that step. My Evo is overclocked and undervolted just fine, although IIRC I can only push it up to 1.1 GHz . My tablet is 1ghz to 1.6ghz and is undervolted as well, though.

merge rls 2.0, iron monkey, Droid overclock because of the profiles options. I set up four profiles including one for temp. sometimes i'm underclocking and sometimes overclocking but only up to 1.19 to prevent freeze and boot loops. Only downside is right at open Droid overclock needs su permission but that is my choice since profile changes at open.
Very snappy afterwards.
Sent from my PC36100 using XDA Premium App

When I had the 4G, I was never able to go above 1118, or somewhere around that. It would have freezing issues.
On my evo shift, I was able to do 1.7 gHz (compared to stock 800 mhz) ok. 1.6 pretty reliabily, and I could run 1.5 all day long. Some guys could do 1.9. It just depends on the phone.

Actually overclocking and undervolting is counter-productive. What you should do, is read carhaulers and ropodopes guide over at vaelepak. Its give some good useful info about how to set up a good aosp rom. I'm underclocked, undervolted, and still getting 1400+ benchmarks. Check it out bro. You'll love the results.
Sent from my PC36100 using xda premium

tommy0823 said:
Actually overclocking and undervolting is counter-productive. What you should do, is read carhaulers and ropodopes guide over at vaelepak. Its give some good useful info about how to set up a good aosp rom. I'm underclocked, undervolted, and still getting 1400+ benchmarks. Check it out bro. You'll love the results.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
Shoot the brutha a link
TrevE Supporter!

tommy0823 said:
Actually overclocking and undervolting is counter-productive. What you should do, is read carhaulers and ropodopes guide over at vaelepak. Its give some good useful info about how to set up a good aosp rom. I'm underclocked, undervolted, and still getting 1400+ benchmarks. Check it out bro. You'll love the results.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
What? Overclocking and undervolting are two completely different things, and they aren't mutually exclusive. Unless you can provide a good reason as to why it's counter productive to do both, I don't buy that at all. Just checked my phone, my overclock requires an extra 25 mV for all three steps I've overclocked. 25mV isnt much, and it certainly isn't going to kill my battery that much faster.
Besides, the only time the CPU is going to be entering these high power modes is when it needs to do work, and it's better to do work as fast as possible to go back to sleep. Would you rather wake up, do a mundane task for 5 minutes, then go back to sleep or wake up, do a task at 2x the speed while only consuming 30-50% more energy, then going back to sleep after only 2.5 minutes?
HUGI is real.
Sent from my Transformer TF101

Yea shot me the link too bro.
Sent from my PC36100 using xda premium

First let me say I don't use viper mod or any voltage controlling mod.
On sense 3.0 roms such as mikg I over clock to 1152 and set the minimum to 384 and its smooth as butter. No problem and battery lasts all day.
On aosp however such as decks (I'm on it now) I underclock to 499 and leave the min at 254. Smooth as always and battery lasts forever.
Anything past 1152 is going to cause problems (at least in my experience) also the rom/kernel can effect how much you can overclock.
Sent from my PC36100 using xda premium

Gary13579 said:
What? Overclocking and undervolting are two completely different things, and they aren't mutually exclusive. Unless you can provide a good reason as to why it's counter productive to do both, I don't buy that at all. Just checked my phone, my overclock requires an extra 25 mV for all three steps I've overclocked. 25mV isnt much, and it certainly isn't going to kill my battery that much faster.
Besides, the only time the CPU is going to be entering these high power modes is when it needs to do work, and it's better to do work as fast as possible to go back to sleep. Would you rather wake up, do a mundane task for 5 minutes, then go back to sleep or wake up, do a task at 2x the speed while only consuming 30-50% more energy, then going back to sleep after only 2.5 minutes?
HUGI is real.
Sent from my Transformer TF101
Click to expand...
Click to collapse
Its counter productive because it is giving less to something that needs more. (Don't take this post as me trying to be a ****. Just voicing how someone explained it to me a while ago)
Think of this as cars.
Lets say you have a nice fancy v8 mustang. Stock, everything is well, balanced.
If you start adding parts and get it pushing out 1000 horsepower (overclock) your most likely gonna need more feul (voltage) or at least stock amount flowing into the engine just to keep it running.
Now lets say you got that same 1000 horsepower gas destroying mustang and you start to lower the amount of gas flowing into the engine (undervolt (done in vipermod)) cylinders (CPU) wont get enough gas, it wont work, and your stuck going no where.
So if that made sense (did to me) then you can see why they are counter productive. Unless your using vipermod to overvolt (which idk if you can since I don't use it) then you can disregard this whole post
Sent from my PC36100 using xda premium

Your car analogy is completely irrelevant. You can look up the exact voltages that the CPU runs on at every frequency, *even when overclocking*. Overclocking an Evo 1ghz to 1.2ghz takes maybe a 5% bump in voltage, and that 5% extra power is only going to be used *when the CPU is running at max speed* (which is only when there is a lot of work to do), and even then, it's *still better to let the CPU run at max speed with a tiny bit more power consumption than to cap the CPU at a slower speed and make it work for even longer*. Intel calls it HUGI, Hurry Up and Get Idle.
I know what I'm talking about, and I wish people would stop trying to argue with me based off of second hand speculation. I do this for a living, after all. There is absolutely nothing wrong with overclocking and undervolting, and it's the best way to get the most battery life *and* performance out of your phone, period.
Sent from my Transformer TF101

Gary13579 said:
Your car analogy is completely irrelevant. You can look up the exact voltages that the CPU runs on at every frequency, *even when overclocking*. Overclocking an Evo 1ghz to 1.2ghz takes maybe a 5% bump in voltage, and that 5% extra power is only going to be used *when the CPU is running at max speed* (which is only when there is a lot of work to do), and even then, it's *still better to let the CPU run at max speed with a tiny bit more power consumption than to cap the CPU at a slower speed and make it work for even longer*. Intel calls it HUGI, Hurry Up and Get Idle.
I know what I'm talking about, and I wish people would stop trying to argue with me based off of second hand speculation. I do this for a living, after all. There is absolutely nothing wrong with overclocking and undervolting, and it's the best way to get the most battery life *and* performance out of your phone, period.
Sent from my Transformer TF101
Click to expand...
Click to collapse
Hmm, *interesting*. I believe the best answer to the OP was covered rather well earlier. It's all about your rom/kernel/hardware combination. With all the variables to consider as relevant, your best bet is to experiment and find what works for your device. Don't check set on boot untill you are confident the set-up is stable. Higher is not always better with overclocking. My device runs blazingly well underclocked @768max. Gets insanely great battery @499max. However my quadrants are better @ 1036 than at 1190.
Great thing about android is you can experiment and learn through trial and error.
Sent from my PC36100 using xda premium

[KERNEL][WIP][MARVEL][UPTO 864MHZ]TurboKernelV3[12/01/12]

Kernel is not stable, and development is on hold
Ok i have created a new kernel for sense based roms, including my rom TurboFire.
Features
Allows overclocking upto 864MHz
Default is 600/245 screen on 245/245 screen off
Supports ext2/3/4
Supports swap
As always make a backup first before flashing this.
This kernel includes the andrev_oc overclocking daemon. It is a native written program than changes the frequency based on phone state. This is better than the smartass govenor as you have more control, and its more stable, quicker and more effective than using setcpu to control frequencies based on phone state.
It can be controlled by OC/UV Beater which is included in the .zip. You must uninstall all cpu control apps first or it will automatically deactivate.
Remember when overclocking, use TEMP activate for a few minutes before using perm activate to make sure it is stable.
This does not work with CM7 or ICS based roms, so dont try it, I will work on a CM7 version tomorrow.
Download links:
V1:http://djpc.org.uk/roms/TurboKernelV1-by-djpc.zip
V2:http://djpc.org.uk/roms/TurboKernelV2-by-djpc.zip
V3:http://djpc.org.uk/roms/TurboKernelV3-by-djpc.zip
OC daemon and control:http://djpc.org.uk/roms/OC-Turbo-deamon.zip
Changelog:
V2
Wifi maybe fixed (need testers)
Changed acpu tables - new max overclock 864MHz
V3
Kernel and daemon are now seperate for testing purposes
Hopefully fixed (fingers crossed)
OK im sorry guys, i jumped the gun a little on this phone, unfortunatly the way the processor's clock generator works we can only have multiples of a certain frequency, which leaves us capped at 864MHz, this is a physical barrier associated with the way the hardware was made and no dev will be able to change this.
I hope to have voltage tweaking working at some point so people can run there devices at higher frequencies.

The beta 2 roms link is down
Sent from my HTC Wildfire S using xda premium

eoghan2t7 said:
The beta 2 roms link is down
Sent from my HTC Wildfire S using xda premium
Click to expand...
Click to collapse
Fixed the link

I'm guessing it's not supported on the MarvelC?

Prenominal said:
I'm guessing it's not supported on the MarvelC?
Click to expand...
Click to collapse
There is currently no marvelc support, but i plan on building a marvelc kernel tomorrow

Great! Can't wait, I wish you luck. I'm really hoping more development steps on the scene for MarvelC.

I hope my phone dosent blow up.

I have trouble overclocking to 787 mhz, I don't think about 1.5 Ghz, but I am willing to try.
Wildfire S powered by CM 7.2

It will if you pick 1.5. Be CAREFUL.
Sent from my HTC_A510c using Tapatalk

wifi not working.

I cant overclock my WFS because in this program I cant change frequency
Rom: HENSE ROM V3 with stock kernel after that I flash your kernel/

How the hell would phone with 600MHz proc work on 1.5GHz ?

Nightshadow931 said:
How the hell would phone with 600MHz proc work on 1.5GHz ?
Click to expand...
Click to collapse
Never can't be true, 806 is the max. Even I cant reach 806 Mhz.
He just wants to be popular .
But the extra features are great if the kernel would work well .

OC doesn't work. Max is 600 mhz

At 1.5GHz it would be as hot as holding the sun in your hand lol
Would simply burn your CPU out!!!
Be careful guys.

just add another core to ws

Sry, but are you crazy announcing 1.5 ghz, even the desire s with a stock speed of 1 ghz is only up to 1.8 ghz stable, that would mean the wfs could only be overclocked to 1ghz without getting unstable, but it would also get hot with this speed.
Swyped from my desire s running damn sweet ice cream

I set 1.5GHz as the max as that number is an arbitrary number, im not expecting people to achieve this (if the kernel work properly anyway) and i doubt the phone would be stable enough to even get hot at that speed; i set it there so people can try as high as they dare rather than as high as the kernel maker wants them to go. As for those saying that anything above 800mhz is impossible, im trying to get voltage control working so that you can increase the voltage slightly (this i will cap to sensible values or else you can fry stuff) so you can hit higher numbers. My desire z has run at 1.9GHz before, from stock of 800MHz, and im not a lucky one. I know its a totaly different phone but these MSM phones can overclock really well normally.
I am going to look into the wifi today and get that fixed as well as fixing the frequency table, as well as having higher frequency's i will have more in the 600-800 mhz region for those who have phones that dont like to be overclocked. I also hope to build a CM7 version and one for the marvelc as they have been left in the cold atm for OC kernels.
PS: This dev work is difficult for me as i dont personally own a WFS for testing, if people want to get this kernel and coming roms working fast with no bugs i need people to read the dev team thread and join the irc, we already have a few guys in there and when things have gotten going it is very productive, benjamin as nearly gotten the touchscreen working for ICS now

Good work, can you check your pm's?
I ask again here, can you edit jikantaru's kernel so max is 600 Mhz and not 806 Mhz?
Thanks

New version uploaded, read first post for details, if you encounter issues come and chat with us at #wfsdevteam on freenode IRC

Is the phone stable when overclocking past 1.3ghz?

I heard there was a problem with stability issues before. Has it been fixed?
Also, do any of you guys feel the need to OC in the first place?

iArtisan said:
I heard there was a problem with stability issues before. Has it been fixed?
Also, do any of you guys feel the need to OC in the first place?
Click to expand...
Click to collapse
I tried OC'ing to 1,4 for a short time, didnt get any instabilities.
Which leads me to question two. No I don't feel the need to OC this phone, it is still good enough to cope with everything i throw at it.

The worst that will happen is that it will run a little hotter than normal. I was running Trinity Kernel on RasCream ROM clocked at 1.5GHz and it was fine, nothing crashed, no reboots, all was well.
Besides; It's a Nexus, it was built for this!

This varies for everyone
Sent from my GT-I9300 using Tapatalk 2

Meh. It all varies. No 2 chipsets are the same. What may work for someone else may not work for you. Trial and error is the only surefire way to find out.

Hi,
I agree with what has been said above, all the CPU's are not equal but actually the progress made by the kernel devs allows all (or almost) phones to run at 1.3* Ghz (1.34/1.35 Ghz, it depends of the kernel) without any issues.I think it's for all, actually I don't remember a user with issues at 1.3* Ghz...
And for most phones 1.5 Ghz is fine.For some others, above 1.5 Ghz is problematic but it depends also of too many factors.
Now it's not like it when the Genx came out, where 1.3 Ghz was the limit of CPU overclock for all the phones.
And many people can run stable at 1.65 Ghz, also it depends of the kernel.
For me for example my max CPU freq usable each day, so stable is 1.72 Ghz with Glados kernel, above (like 1.8 Ghz) it runs fine for 30 mins, sometimes 1 hour, but after always freeze/reboot... maybe my CPU can't reach this CPU freq or maybe my settings are wrong (voltage) ...
I agree, an extreme overclock like 1.72 Ghz is not really necessary for all day (heat, battery life, etc...) but a little overclock like 1.5/1.53 Ghz and you a difference in certain case (openning some apps, general UI, browsing, etc...).
But if we have the ability to test and play...why not... ,in any case for me it's yes, I like overclock and test the possibilities/limits of my phone, different settings...
Everyone does as he wants and it depends on what you want (battery life,a little more power in some situation like playing or a higher bench score ).

Well considering Texas instruments recommended highest clock speed for this processor is 1.5 ghz I'd say your fine. Anything above that is dependent on how well your chip set will handle it. Besides who honestly has needed to OC for anything other than benchmarks?
Sent From My Sprint Galaxy Nexus