Xperia ARC issue - RED LED! - Xperia Arc Q&A, Help & Troubleshooting

Hello,
I have a big problem with my Xperia ARC.
After a downgrade from 2.3.4 to 2.3.2 for rooting purposes and after installing and running GingerBreak v1.2 the device the device suddenly showed 0% battery and went dead.
When I try to charge the device the red led appears, it shows that it's charging but it never turns to green(left it on the charger for 12 hours).
So, no matter what kind of software I try to flash with flashtool it still doesn't work.
Tried the battery at a GSM service and it's ok, aprox 95% still available, also the battery is fully charged.
But when the device boots it only takes for a second and then it shuts down from lack of power(the software shows 0%) although the battery is charged.
Any ideas regarding this issues?
I'm running out of ideas...
Best regards,
Robert

Pull the batt for few seconds and put it in again. It will fix. There is already guide about this issue on other thread.
GN Multimedia - Xperia Arc

gunawan-1 said:
Pull the batt for few seconds and put it in again. It will fix. There is already guide about this issue on other thread.
GN Multimedia - Xperia Arc
Click to expand...
Click to collapse
no luck with that... imagine that I've removed the battery a few dozen times.

If pc companion recognises it via usb then start from scratch, may be a corrupt download.
sinkster

Off topic:
But how did you get 2.3.4 yet?
Sent from my LT15i using XDA Premium App

Flo95 said:
Off topic:
But how did you get 2.3.4 yet?
Sent from my LT15i using XDA Premium App
Click to expand...
Click to collapse
probably taken from arc s?
but +1

sinkster said:
If pc companion recognises it via usb then start from scratch, may be a corrupt download.
sinkster
Click to expand...
Click to collapse
It does recognize the device, both PC Companion and SEUS.
Butt... they report that "Your phone is up to date".
So I'm left with flashtool and numerous of .ftf files already tried, like :
Lt15i_3.0.1.A.0.145_o2.ftf
LT15i_3.0.A.2.181_HongKong.ftf
LT15i_4.0.A.2.368_Nordic (Telia).ftf
No luck with that either.
Tried with "arc_lt15i_modded.img" but it's designed for an ARC with an unlocked bootloader, mine is not, and keeps looping on reboot.
Can someone help me with a .img file from their ARC in order to use fastboot - one for an locked bootloader?
Best regards,
Robert
---------- Post added at 06:05 AM ---------- Previous post was at 06:00 AM ----------
Regarding the 2.3.4 question :
The phone, it's a test demo unit.
When I received it had 2.1 installed.
Sent it to SE and when it came back had the 2.3.4.
But not for a long time... Because I went back to 2.3.2 for rooting and... RED LED of death
---------- Post added at 06:11 AM ---------- Previous post was at 06:05 AM ----------

New info!
Just discovered that my ARC is a "brown" phone aka a prototype.
So this is the reason why both SEUS and PC Companion deny the software update/repair.
Best regards,
Robert

why is your phone brown? Did you unlock bootloader? If so have you tried locking it and then trying seus?

soldiers33 said:
why is your phone brown? Did you unlock bootloader? If so have you tried locking it and then trying seus?
Click to expand...
Click to collapse
"brown" phone is the generic name for devices that are not for sale,
the devices are given for testing purposes.
As far as I know the bootloader is locked in this ARC, the reason for not succeeding with the update/repair is that my ip address is not in the SEMC list - my guess is that some approved by SE repair shops can help me with an update.
Thanks,
Robert

SEtool might be help u
try to contact him
http://forum.xda-developers.com/showthread.php?t=1252019

guaiwujia said:
SEtool might be help u
try to contact him
http://forum.xda-developers.com/showthread.php?t=1252019
Click to expand...
Click to collapse
Yes, looks like a broken bootloader, maybe I can fix it.
Send me a pm

robitza11 said:
Hello,
I have a big problem with my Xperia ARC.
After a downgrade from 2.3.4 to 2.3.2 for rooting purposes and after installing and running GingerBreak v1.2 the device the device suddenly showed 0% battery and went dead.
When I try to charge the device the red led appears, it shows that it's charging but it never turns to green(left it on the charger for 12 hours).
So, no matter what kind of software I try to flash with flashtool it still doesn't work.
Tried the battery at a GSM service and it's ok, aprox 95% still available, also the battery is fully charged.
But when the device boots it only takes for a second and then it shuts down from lack of power(the software shows 0%) although the battery is charged.
Any ideas regarding this issues?
I'm running out of ideas...
Best regards,
Robert
Click to expand...
Click to collapse
Hi Robitzza, I've got the same problem here with my NEO. Red LED, 0% battery after running gingerbreak1.2 on 2.3.2 HK.
I have reflashed my NEO to 2.3.2 HK, 2.3.2 Global, 2.3.4HK, no luck.
Also I have removed the battery for one night, still nothing have changed.
I dont think it is a problem with BL, but I could be wrong tho. Im sure the BL is locked. The device can startup normally with cable plugged in, and the system is running smoothly. It shows 0% battery. If I unplug the cable, the device goes down immediately coz of low battery.
I am gonna send my phone to SE if there is nothing else I can do.
Please let me know if you have made any progress. Thanks!
EDIT: Well, may it is the bootloader. One of my friends told me that it could be the battery sensor which is not initialized because of the damaged BL.

yunle said:
Hi Robitzza, I've got the same problem here with my NEO. Red LED, 0% battery after running gingerbreak1.2 on 2.3.2 HK.
I have reflashed my NEO to 2.3.2 HK, 2.3.2 Global, 2.3.4HK, no luck.
Also I have removed the battery for one night, still nothing have changed.
I dont think it is a problem with BL, but I could be wrong tho. Im sure the BL is locked. The device can startup normally with cable plugged in, and the system is running smoothly. It shows 0% battery. If I unplug the cable, the device goes down immediately coz of low battery.
I am gonna send my phone to SE if there is nothing else I can do.
Please let me know if you have made any progress. Thanks!
EDIT: Well, may it is the bootloader. One of my friends told me that it could be the battery sensor which is not initialized because of the damaged BL.
Click to expand...
Click to collapse
As I said before I can fix the bootloader. Don't be afraid there is no cost for fix that.
Send me a pm.
Sent from my LT15i using xda premium

Hi Alej, will I lose warranty if I reflash the loader?

yunle said:
Hi Alej, will I lose warranty if I reflash the loader?
Click to expand...
Click to collapse
Not at all

Did you end up fixing this problem?
I'm having the same problem.

Alejandrissimo said:
Not at all
Click to expand...
Click to collapse
I sent my phone to SE. They didn't bother to figure out what caused the problem and just replaced a new motherboard for my phone.
Thank you very much for you offer. I will let you know when my phone is in trouble again after warranty.

Same problem for me, tried everything but no gain.... i dn't have my warranty too.. somebody help please,,,

Can someone try this modification of DooMLoRD's advice:
1. flash any stock FTF
2. DO NOT power on device
3. now press back button without release it and directly connect to charger (usb or wall charger) for a few hours [make sure that the offline-charging "animation" is seen on screen] and test if led is green or orange. If it's red, it doesn't work.
4. If it's not red, you can release back button and wait a few hours charging and reboot your phone.
regards

Related

[Q] Arc S bricked because of Xperia Ice Cream Pureness?

Hey, Yesterday I installed Xperia Ice Cream Pureness Rom.
After having a play around I thought most of it was quite good.
I installed some apps that I use daily and went to bed.
Went to work this morning everything was good.
Used the phone a couple of times phone calls, text messages etc etc
At lunch time I went home looked at my phone and it was off. I tried to switch it on nothing.
Tried to pull the battery and switch on... Nothing
Tried connecting to SUS... Nothing
To install I
1. Updated my firmware with SUS doing a clean full install
2. Rooted and installed CWM from the market so I could wipe all data/cache etc etc
3. Installed the .zip and extra pack latest version 8.00
4. Booted and everything was running great
Does anyone know why this would happen?
I am using my arc at the moment as I am taking my Arc S to the shop I got it from tomorrow for them to send to warranty
The status of my phone was totally standard
Sim free factory unlocked
Fastboot enabled but never used
Bootloader locked as never had need to unlock it
Thanks in advance,
Zippy
Try full reflash.
PS: Wrong Forum, post in Q&A
Wasn't quite sure so I am sure a mod can move it
How can I full flash if it is bricked?
No lights no signs of life
Cannot connect to SUS/PC Companion or flashtool
Take battery out for half an hour.
Then connect it while pressing,Back ( left) key. The led should light green. Then reflash with Flashtool.
Sent from my ICS-powered arc S. From Austria! You don't know Austria? Google!
PS: Thank or PM me if you like the Rubiks Cube!
what is your battery states
if its full then there is some seriouse issue
if its not then do charge by any battery charger
and when you get or able to conntect in flash mode do first thing and that is do update you handset with sony Update service not pc compain.
Thanks for your replies
papayayoghurt said:
Take battery out for half an hour.
Then connect it while pressing,Back ( left) key. The led should light green. Then reflash with Flashtool.
Click to expand...
Click to collapse
I tried the same battery in my LT15 and it was 80% charged.
I also tried removing the battery for some time no lights at all
chauhanjayc said:
what is your battery states
if its full then there is some seriouse issue
if its not then do charge by any battery charger
and when you get or able to conntect in flash mode do first thing and that is do update you handset with sony Update service not pc compain.
Click to expand...
Click to collapse
I cannot connect to PC companion anyway as it won't switch on and SUS not detecting
I am aware I have bricked it and not bothered as I sent it for warranty repair today.
The question was does anyone know why this would happen?
I did everything correctly and even installed over a fresh rom with no problems at all
Thanks again
No one?
Sent from my LT15i using xda premium
Not a clue. You said in your first post that you had fastboot enabled but then that you didn't have your bootloader unlocked, well if you hadn't unlocked your bootloader you can't have had fastboot enabled.
Not entirely, fastboot has nothing to do with the bootloader
My phone had fastboot enabled from factory so bootloader unlock is possible official method.
Ah well get my phone back in a couple of days just thought if I could know the issue and if it could happen to others these people could be warned
Thanks everyone for replies
Sent from my LT15i using xda premium

[Q] HELP!!!! Xperia Play R800i- wont turn on!!!!

Hey guys, my xperia play R800i wont boot. what happened was I was trying to flash original firmware through flash tool and then I get an error on flashtool and it says below "device disconnected" so im like what the heck. ill give it another go, right. but then when I go and plug it back into the computer while holding the back button the LED doesnt go green instead it flashes red, three times. and the computer shows it up as an unrecognized device. I cant to a repair through PC companion and I am not able to flash through flash tool, any ideas?
ps. it is locked boot loader and it says :bootloader unlock allowed: no
if that is any help.
Put your device on charge or wait a while. A suggestion that may work
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
I left it on charge for eight hours straight and still the same result
Have you tried taking battery out for a few seconds then putting it back and try to turn it back on charger.
R800x-unlocked/ Aokp-m6/ 4.0.4
Lordomn said:
Have you tried taking battery out for a few seconds then putting it back and try to turn it back on charger.
R800x-unlocked/ Aokp-m6/ 4.0.4
Click to expand...
Click to collapse
Yes, still no luck. I have tried everything. I am waiting to get a reply back from someone who can do it. I get my HTC Incredible S back in 2 weeks anyway, it just means that I dont have a phone.
NevErSn0w said:
Yes, still no luck. I have tried everything. I am waiting to get a reply back from someone who can do it. I get my HTC Incredible S back in 2 weeks anyway, it just means that I dont have a phone.
Click to expand...
Click to collapse
Is it booting upto se logo???
Sent from my R800i using xda premium
sorry but mine doesnt show the logo,when you press the on button it just blinks,3 times
i need assistance ASAP
It means insufficient charge you will need a different phone capable of charging it and charge it to 100% i know cuz it happened to me
Sent from my GBTweaked v7.1 r800x using Tapatalk 2
Try pressing the power button along with some other button to switch it on. Weird, but worked for me once on my x10 mini. in that phone, power + home worked for me twice
NevErSn0w said:
Hey guys, my xperia play R800i wont boot. what happened was I was trying to flash original firmware through flash tool and then I get an error on flashtool and it says below "device disconnected" so im like what the heck. ill give it another go, right. but then when I go and plug it back into the computer while holding the back button the LED doesnt go green instead it flashes red, three times. and the computer shows it up as an unrecognized device. I cant to a repair through PC companion and I am not able to flash through flash tool, any ideas?
ps. it is locked boot loader and it says :bootloader unlock allowed: no
if that is any help.
Click to expand...
Click to collapse
just simply charge the phone then after a minute, slide the d-pad and I don't understand why it will turn on and it will work just fine..
Help asap please!!
Hi,
I am in the same situation here. I tried to flash my xperia play using flashtool with a "ftf'" for the r800a. Because it was initally flashed to r800i. The flash ended fine, but the phone wont start, it is not allowing me to flash it agai because for my pc the device is disconnected and it is not charging. I am really desesperated. Any ideas?!? I had already installed the drivers for the ZEUS flash and for my phone!
Thanks
[Q]R800i wont turn on! red light blinking 3 times.
My Xperia play(R800i) wont turn on after i update. I change from 2.3.4 to 2.3.3 to root my phone. After rooting, i update the software. It turns off by itself. I dont know what to do. When i pressed the on button it will blink red light 3 times. When i charged my phone, the light turns green. Green light means battery fully charged right? but why i still cant turn on my phone?
Bootloader: unlock
Root: Yes
Please help! its my new phone. Thank you!
you should not have updated your phone that way... looks like you semi bricked it... get in touch with Alejandrissimo whether it be on here or on his site... he should be able to fix it.
freewzeme hawk said:
My Xperia play(R800i) wont turn on after i update. I change from 2.3.4 to 2.3.3 to root my phone. After rooting, i update the software. It turns off by itself. I dont know what to do. When i pressed the on button it will blink red light 3 times. When i charged my phone, the light turns green. Green light means battery fully charged right? but why i still cant turn on my phone?
Bootloader: unlock
Root: Yes
Please help! its my new phone. Thank you!
Click to expand...
Click to collapse
If you have updated phone using seus or pc companion then relock bootloader and flash ftf using flashtool then unlock bootloader Or if you used flashtool then you have broken .ta so contact alejandressimo
Sent from my R800i using xda premium
Change battery !!

[Q] Xperia S HARD Bricked!!! Need Help

Hello guys.
My Sony Xperia S got Hard bricked after i tried to partition my SDcard from TWRP recovery which unfortunately failed due to some reason.....
I had boot manager installed for dual boot and i had sony stock firmware 6.1.A.2.55 on the native and CM10 on loop ...
The partition was tried in TWRP for loop in Ext4 format
My Xperia S now does not respond to fastboot buttons as well as all other combinations ...
It doesnt light any LED not even while its connected to the charger..
The only thing that happens is when i connect it using USB cable without any combinations and the computer detects it as SEMC flash device..
Is there any method to flash using this mode?
I have tried every method on all the forums.(flashtool,fastboot,taking battery out ,power+vol up,everything )
Guys please i need serios help any experienced suggesions would be helpful ...
Please help :crying:
PS: i had never thought that trying to partition the SDcard would brick my phone..
Did you leave your phone connected to wall charger? How many hours you leave it? Mine SONY logo appear in 8 hours. Try it. It may help. Leave your phone connected yo wall charger for sometime.
Sent from my Xperia ion using xda app-developers app
pharix said:
Did you leave your phone connected to wall charger? How many hours you leave it? Mine SONY logo appear in 8 hours. Try it. It may help. Leave your phone connected yo wall charger for sometime.
Sent from my Xperia ion using xda app-developers app
Click to expand...
Click to collapse
Okay ill try that for sure and let u know
Wow i don't know how ...but just as i connected it to the charger the orange LED shows up .....But there is no sony logo anyway ...lets wait
nope nothing happened except the LED that glows :crying:
How the duck did you take your battery out? It has an INBUILT one, why would you take apart the entire phone?
Then, after telling you how stupidly you did that;
can you go back into the recovery? (probably yes, but it's weird)
Did you ACTUALLY take apart the phone to take the battery out? (probably not)
Do you have an unlocked bootloader? (i think you do, but not sure...)
Do you still have warranty? (probably yes)
Try again, because if the orange LED showed up, it's probably not too late...
Now go and use FlashTool once more...
someone755 said:
How the duck did you take your battery out? It has an INBUILT one, why would you take apart the entire phone?
Then, after telling you how stupidly you did that;
can you go back into the recovery? (probably yes, but it's weird)
Did you ACTUALLY take apart the phone to take the battery out? (probably not)
Do you have an unlocked bootloader? (i think you do, but not sure...)
Do you still have warranty? (probably yes)
Try again, because if the orange LED showed up, it's probably not too late...
Now go and use FlashTool once more...
Click to expand...
Click to collapse
yes i took the phone apart took the battery out ...waited long enough for the capacitors to discharge and then again put it in...
no i can't get back into the recovery ...i can't even boot the phone and no combination is working
yes i have an unlocked bootloader
no on't have the warranty..
The orange LED glows up while charging only
the phone does not go to fastboot or any other mode so i can't use flash tool
the only thing that comes on the computer when i plug the USB is "SEMC flash device" ....which non of the tools recognise
Guys please ...is there anyone out there who can help me? :crying:
I do believe you DID have warranty up until the moment you took apart the phone (I think the repair service guys would fix your phone without chacking for a locked BL...)
someone755 said:
I do believe you DID have warranty up until the moment you took apart the phone (I think the repair service guys would fix your phone without chacking for a locked BL...)
Click to expand...
Click to collapse
They wont know you took it apart. There is no tamper protection.
mrsatan said:
They wont know you took it apart. There is no tamper protection.
Click to expand...
Click to collapse
Exactly they dont have any protection against that.....and i dont think any phones with an inbuilt battery would have such protection....
Hi mate, try some tips that some members gave me on my topic...
I don't know if those tips will work for you, but maybe yes! ^^
My phone stills bricked, but maybe work in your case!
Thread link: http://forum.xda-developers.com/showthread.php?t=1968735
Carcass.br said:
Hi mate, try some tips that some members gave me on my topic...
I don't know if those tips will work for you, but maybe yes! ^^
My phone stills bricked, but maybe work in your case!
Thread link: http://forum.xda-developers.com/showthread.php?t=1968735
Click to expand...
Click to collapse
Thanx mate for ur reply ...but unfortunately i have tried all those methods , none of them seems to work for me either
PhoenixDD said:
Thanx mate for ur reply ...but unfortunately i have tried all those methods , none of them seems to work for me either
Click to expand...
Click to collapse
I'm starting to think that my case could be a corrupted bootloader, where I have to use JTag to try to save, but I don't know anyone who have a JTag, neither in my country.
I don't know what could be, but I still entering in flashmode or fastboot and my PC recognize my phone with testpoint, so I think that maybe is not a hardware problem...
Carcass.br said:
I'm starting to think that my case could be a corrupted bootloader, where I have to use JTag to try to save, but I don't know anyone who have a JTag, neither in my country.
I don't know what could be, but I still entering in flashmode or fastboot and my PC recognize my phone with testpoint, so I think that maybe is not a hardware problem...
Click to expand...
Click to collapse
Even i think i might have to do that ...u r stil very lucky to be able to get into fastboot and flashmode....i can't get into those too...
The only 1 option i haven't tried is using testpoints .....ill try that out after i get all the tools required
Hi, I decided to post it here because it seems that anything I post on Xperia Ion forum is not read, it is inactive.
I already searched everywhere and I'm loosing my hopes. I'm trying to revive an Xperia Ion and this is what I get:
When I plug the phone in the wall charger the red led turns on for some minutes and then turns off.
The same happens when I plug on PC, when the led turns off it is detected as "Somc flash device" in windows device manager and this shows in flashtool:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Nothing changes if I plug in pc with volume + or - pressed, it don't goes into fastboot or flashmode.
I hope you could help me. Thanks
Hi, I decided to post it here because it seems that anything I post on Xperia Ion forum is not read, it is inactive.
I already searched everywhere and I'm loosing my hopes. I'm trying to revive an Xperia Ion and this is what I get:
When I plug the phone in the wall charger the red led turns on for some minutes and then turns off.
The same happens when I plug on PC, when the led turns off it is detected as "Somc flash device" in windows device manager and this shows in flashtool:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Nothing changes if I plug in pc with volume + or - pressed, it don't goes into fastboot or flashmode.
I hope you could help me. Thanks

[Q] R800i completely bricked?

Hello dear readers and great XDA members,
Last summer I unlocked the bootloader of my Xperia Play R800i with the testpoint method. Everything worked fine: I installed CWM and loaded a FreeXperia version of CyanogenMod 9.1.
A couple of days ago, I wanted to finally update my ROM to a newer version since there had been so many releases since last summer. I loaded the new ROM and everything worked fine. However, some of the problems I hoped would've been solved by the update, weren't solved at all, especially the video capturing and panorama pictures. So I decided it maybe would be better to flash a new kernel.
I searched for a kernel, but couldn't find anything I liked. Then, I can't remember where, someone posted the "boot.img" files included in the FreeXperia CM9 ROM zip packages were kernel releases. So I decided to use flashtool and flash the boot.img as a new kernel.
This obviously didn't work and I tried some others. By the way: I couldn't boot into ClockWorkMod anymore since I tried to flash a new kernel. Only fastboot and flashmode would work.
I couldn't remember which kernel I used last summer, so I wandered the internet and eventually found that an X10 kernel was included in Flashtool. I though I remembered something about X10 from last summer, so I decided to stupidly flash that kernel to my Xperia Play.
After this flash completed, my phone doesn't respond to anything anymore. Following a list of things I tried (everytime after I tried something, I removed the USB cable and the battery to make sure the Xperia Play was turned off):
- When I press and hold the power button, nothing happens, not even the small vibrate always felt when the phone starts.
- Getting into fastboot mode doesn't work anymore (I tried with holding the search button and connecting USB, as well as some other buttons, nothing worked.)
- Getting into flashmode doesn't work either.
- No matter what I do, the phone won't give me a sign it's still alive. (no LED, no vibrate, no screen, nothing.)
- I tried the Sony Update Service, but that obviously doesn't recognize the phone
- Flashtool doesn't recognize the phone either.
- ADB doesn't recognize the phone of course.
- s1tool (the tool I used for the TestPoint bootloader unlock) recognizes I plug something in, but then gives an error it can't get access to it.
- I charged the battery overnight and tried all of the above again... still nothing works...
- When I plug in the phone to the PC, my PC recognizes something plugged in, but with the name QHSUSB_DLOAD in Device Manager.
(by the way: I am using Windows 8 Pro x64)
Is this phone completely dead or is there any way it can be saved? I was planning on keeping this phone at least until the end of 2013 or begin of 2014 before upgrading... An immediate upgrade is not in my budget and for now I have returned to my Nokia 5530 on Symbian, but that's nothing compared to Android :'(
Thank you very much in advance... I really hope someone can save my poor phone. I know I have been stupid, but I think I somehow panicked when I couldn't get the phone back into CWM and stupidly flashed the X10... Stupid stupid me.
Well I always update to the latest working kernel when I flash a new rom. The one working currently for me is fxp152 kernel.
Have you tried with battery, holding the search button, plug it in, then hold the Power button while still holding search.
Contact Alejandrissimo, he can probably help you.
Sent from R800at
eksasol said:
Well I always update to the latest working kernel when I flash a new rom. The one working currently for me is fxp152 kernel.
Have you tried with battery, holding the search button, plug it in, then hold the Power button while still holding search.
Contact Alejandrissimo, he can probably help you.
Sent from R800at
Click to expand...
Click to collapse
Thank you for the response! Where do you find these kernels? Are those boot.img files included with fxp zip files the kernel images?
I hadn't tried to hold the power button after holding search button + plugging it in, but it doesn't work either
I will probably contact Alejandrissimo in a couple of days if I can't solve it myself or if nobody else can help me solve it...
Thank you!
same boat
ThirtyOne34 said:
Thank you for the response! Where do you find these kernels? Are those boot.img files included with fxp zip files the kernel images?
I hadn't tried to hold the power button after holding search button + plugging it in, but it doesn't work either
I will probably contact Alejandrissimo in a couple of days if I can't solve it myself or if nobody else can help me solve it...
Thank you!
Click to expand...
Click to collapse
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
try this it works
tommyforest123 said:
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
Click to expand...
Click to collapse
Pull the battery out put it in close the cover plug usb then hold power button and flashtool from androxide should detect it.
Qshusb error
Hi,
Can anyone help. Basically my phone is hard bricked. No logo, no flashmode or fastboot recovery. Totally dead. When i connect to pc - I get QSHUSB DLOAD error, the pc wont recognise my phone. I have tried flashtools but, I cant enter into flashmode ( holding down back while connecting usb...I know how to fix it if i can get my phone back into a softbrick.( getting the sony logo - being able to enter flashmode )..anybody have any ideas please. I have searched online for days with no answer. Xperia play 1 week old running 2.3.4. - i tried to install ics 4.0.4 gamer rom but pressed the flash x10 rom in flashtools by mistake ...
Rmontoya83 said:
Pull the battery out put it in close the cover plug usb then hold power button and flashtool from androxide should detect it.
Click to expand...
Click to collapse
You clearly have no idea what you are talking about. i have read you say this over and over again and yet it doesn't work. you need to press back not power.
tommyforest123 said:
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
Click to expand...
Click to collapse
tommyforest123 said:
Hi,
Can anyone help. Basically my phone is hard bricked. No logo, no flashmode or fastboot recovery. Totally dead. When i connect to pc - I get QSHUSB DLOAD error, the pc wont recognise my phone. I have tried flashtools but, I cant enter into flashmode ( holding down back while connecting usb...I know how to fix it if i can get my phone back into a softbrick.( getting the sony logo - being able to enter flashmode )..anybody have any ideas please. I have searched online for days with no answer. Xperia play 1 week old running 2.3.4. - i tried to install ics 4.0.4 gamer rom but pressed the flash x10 rom in flashtools by mistake ...
Click to expand...
Click to collapse
Hi Tommy,
I am very sorry for my late response. I haven't fixed my phone yet, but I fear only a hardware flash would work... I think I am going to try to get my phone back to the store where I bought it and I hope they'll fix it. If they don't, I will try to find someone who can hardware flash or ask Allejandrissimo (an Xperia bricked devices expert, it seems...)
I hope you will get your phone to work again! (And please let me know how you did it if you succeed). I will keep you updated if there is any progress. I am very busy at the moment though, so I don't know when I can get my phone back to the store. In the meantime, I have also bought a used Galaxy Nexus...
Greetings,
Sven
EDIT: I think I also accidentally flashed the X10 rom or kernel in the flashtool...
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
nickholtus said:
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
Well, the problem is we can't enter flashmode or fastboot... Really no life to it...
But thanks for the input!
hi guys, ive rooted n unlock boot loader for my friend xperia PLAY with android 2.3.3 stok, after 2days he update his phone to 2.3.4..... now his phone did not reboot.. i can not set the phone to fastboot, only flashboot... then i try to falsh ftf.. when i try to reboot, only vibrate but no screen boot n green LED on the start button...can anybody help??.. sorry for my english..
ThirtyOne34 said:
Hello dear readers and great XDA members,
Last summer I unlocked the bootloader of my Xperia Play R800i with the testpoint method. Everything worked fine: I installed CWM and loaded a FreeXperia version of CyanogenMod 9.1.
A couple of days ago, I wanted to finally update my ROM to a newer version since there had been so many releases since last summer. I loaded the new ROM and everything worked fine. However, some of the problems I hoped would've been solved by the update, weren't solved at all, especially the video capturing and panorama pictures. So I decided it maybe would be better to flash a new kernel.
I searched for a kernel, but couldn't find anything I liked. Then, I can't remember where, someone posted the "boot.img" files included in the FreeXperia CM9 ROM zip packages were kernel releases. So I decided to use flashtool and flash the boot.img as a new kernel.
This obviously didn't work and I tried some others. By the way: I couldn't boot into ClockWorkMod anymore since I tried to flash a new kernel. Only fastboot and flashmode would work.
I couldn't remember which kernel I used last summer, so I wandered the internet and eventually found that an X10 kernel was included in Flashtool. I though I remembered something about X10 from last summer, so I decided to stupidly flash that kernel to my Xperia Play.
After this flash completed, my phone doesn't respond to anything anymore. Following a list of things I tried (everytime after I tried something, I removed the USB cable and the battery to make sure the Xperia Play was turned off):
- When I press and hold the power button, nothing happens, not even the small vibrate always felt when the phone starts.
- Getting into fastboot mode doesn't work anymore (I tried with holding the search button and connecting USB, as well as some other buttons, nothing worked.)
- Getting into flashmode doesn't work either.
- No matter what I do, the phone won't give me a sign it's still alive. (no LED, no vibrate, no screen, nothing.)
- I tried the Sony Update Service, but that obviously doesn't recognize the phone
- Flashtool doesn't recognize the phone either.
- ADB doesn't recognize the phone of course.
- s1tool (the tool I used for the TestPoint bootloader unlock) recognizes I plug something in, but then gives an error it can't get access to it.
- I charged the battery overnight and tried all of the above again... still nothing works...
- When I plug in the phone to the PC, my PC recognizes something plugged in, but with the name QHSUSB_DLOAD in Device Manager.
(by the way: I am using Windows 8 Pro x64)
Is this phone completely dead or is there any way it can be saved? I was planning on keeping this phone at least until the end of 2013 or begin of 2014 before upgrading... An immediate upgrade is not in my budget and for now I have returned to my Nokia 5530 on Symbian, but that's nothing compared to Android :'(
Thank you very much in advance... I really hope someone can save my poor phone. I know I have been stupid, but I think I somehow panicked when I couldn't get the phone back into CWM and stupidly flashed the X10... Stupid stupid me.
Click to expand...
Click to collapse
Maybe you still have a chance! Bcoz I think you have completely damaged ta files+ semcboot which can only be repaired by se toolbox 3 which requires credits(money)( I m assuming it'll detect phone bcoz s1 tool recognized it with error ) if you have it than you can repair it or you can contact alejandressimo on gtalk.
Sent from my R800i using xda premium
creative_md said:
Maybe you still have a chance! Bcoz I think you have completely damaged ta files+ semcboot which can only be repaired by se toolbox 3 which requires credits(money)( I m assuming it'll detect phone bcoz s1 tool recognized it with error ) if you have it than you can repair it or you can contact alejandressimo on gtalk.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Really?! I really hope it'll work. I have a Galaxy Nexus now, but I desperately need a Gingerbread for testing my apps again...
Thank you!
Finally some one who has fixed a bricked phone
nickholtus said:
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
When you phone was dead after you put the battery in did you hold the power button then it went in to fast boot instead of holding thback button CORRECT? ²
---------- Post added at 05:19 PM ---------- Previous post was at 05:08 PM ----------
ThirtyOne34;38604501 01 said:
Really?! I really hope it'll work. I have a Galaxy Nexus now, but I desperately need a Gingerbread for testing my apps again...
Thank you![/QUOTE
Message me in myinbox and I will give you # so I can walk you through it. I have bricked my phone many time and a lot of people will tell you I'm wrong. But I'm right all I ask is that you reply to this tread and post that I know how to fix bricked phones.
Click to expand...
Click to collapse
Hello I have the same your problem, are you by any chance managed to solve it? I have sent you to the sony center and have called irreparable ._. If it is true that Alejandro can fix it I wonder what may be the relevant industry professionals sony
Arbiterandrea said:
Hello I have the same your problem, are you by any chance managed to solve it? I have sent you to the sony center and have called irreparable ._. If it is true that Alejandro can fix it I wonder what may be the relevant industry professionals sony
Click to expand...
Click to collapse
Hello Arbiterandrea,
I am very sorry tot report that I wasn't able to fix my Xperia Play. I sent my phone back to the online store I bought it from and it arrived there 1 day before my guarantee expired. When I got my phone back, it was a brand new one with a different serial number, no screen protector, not a scratch. And it was for free thanks to my guarantee, even though I bricked it myself. (I just told them "it suddenly stopped working")
If you've got any guarantee left, you could try that, but if I understand correctly you already tried that... Then I think you should contact Allejandrissimo, I've heard many good things about him. I didn't contact him myself, though.
Good luck! And let me know if you have fixed it?
Greetings
ThirtyOne34

battery possesed

so, as the title says, my zl was fine on friday...then when i woke up on saturday it was totally discharged...so i went and tried to charge...to my surprise all seemed normal until the screen, instead of showing the little battery icon in the middle of it, just rebooted...The phone kept doing that for a lot of time and i was losing my mid...until out of nowhere, in started normally (it had done that previously) BUT THIS TIME, the pc recognized it, and the phone showed that it was CONNECTED to something (the previous times, it didn't...it said 1% AND NOTHING about "connected" or "charging") of course i took that chance and it charged successfully up to 100%. Everything was fine, i could even use it today....BUT then again, the battery showed 5% left...i was about to charge it...and out of nowhere it went to 0% and shut itself down...and then the same started to happen....red led on the bottom...sony showing...screen stays grey....restart. I managed to get into the normal screen...but no to make it "connect". I can't flash, because if i try to flash anything the pc doesn't recognize the flashmode, and can't mount usb storage.
Anything i could do? ( i have 3 different USB cables, and 2 chargers...so i'm pretty sure it's a bug with the battery)
I'm on Stock ROM from Existenz .423.
Thanks in advance :'( i'm desperate
Peanutboy said:
so, as the title says, my zl was fine on friday...then when i woke up on saturday it was totally discharged...so i went and tried to charge...to my surprise all seemed normal until the screen, instead of showing the little battery icon in the middle of it, just rebooted...The phone kept doing that for a lot of time and i was losing my mid...until out of nowhere, in started normally (it had done that previously) BUT THIS TIME, the pc recognized it, and the phone showed that it was CONNECTED to something (the previous times, it didn't...it said 1% AND NOTHING about "connected" or "charging") of course i took that chance and it charged successfully up to 100%. Everything was fine, i could even use it today....BUT then again, the battery showed 5% left...i was about to charge it...and out of nowhere it went to 0% and shut itself down...and then the same started to happen....red led on the bottom...sony showing...screen stays grey....restart. I managed to get into the normal screen...but no to make it "connect". I can't flash, because if i try to flash anything the pc doesn't recognize the flashmode, and can't mount usb storage.
Anything i could do? ( i have 3 different USB cables, and 2 chargers...so i'm pretty sure it's a bug with the battery)
I'm on Stock ROM from Existenz .423.
Thanks in advance :'( i'm desperate
Click to expand...
Click to collapse
Can you explain in structure paragraph? I got confuse reading your essay. So if i understand correctly you can not enter flashmode, so you can not flash anything?
Do you use flashtool? When you open flashtool while connecting your device, do flashtool recognise it?
butatx said:
Can you explain in structure paragraph? I got confuse reading your essay. So if i understand correctly you can not enter flashmode, so you can not flash anything?
Do you use flashtool? When you open flashtool while connecting your device, do flashtool recognise it?
Click to expand...
Click to collapse
exactly, i can't flash because flashtool doesn't recognise the device...the phone shows a red led signal, instead of a green one.
Right now, i have the phone in normal state, connected to the pc, and it says "connect to the charger"...so i don't know what's wrong.
Peanutboy said:
exactly, i can't flash because flashtool doesn't recognise the device...the phone shows a red led signal, instead of a green one.
Right now, i have the phone in normal state, connected to the pc, and it says "connect to the charger"...so i don't know what's wrong.
Click to expand...
Click to collapse
Have you check all drivers need for your device? Do you install PC Companion?
butatx said:
Have you check all drivers need for your device? Do you install PC Companion?
Click to expand...
Click to collapse
checked and checked...everything is set so that the phone should be recognised...but it just doesn't.
Peanutboy said:
checked and checked...everything is set so that the phone should be recognised...but it just doesn't.
Click to expand...
Click to collapse
Have you try this;
1) Switch off the phone
2) Press "volume down" and hold
3) Put he USB cable in.
Do You see driver installation dialog running in windows? wait until it finishes.
4) Start the flashtool
5) Flash the ROM.
Or try downloading SEUS and run it.
Do you install the latest version of flashtool?
butatx said:
Have you try this;
1) Switch off the phone
2) Press "volume down" and hold
3) Put he USB cable in.
Do You see driver installation dialog running in windows? wait until it finishes.
4) Start the flashtool
5) Flash the ROM.
Click to expand...
Click to collapse
When i do that, the pc says "device not recognised"...and it shows a red light
Peanutboy said:
When i do that, the pc says "device not recognised"...and it shows a red light
Click to expand...
Click to collapse
Try remove all drivers related with your device and reinstall.
You can try run the SEUS (Sony Ericsson Update Service) first too if you want.
butatx said:
Try remove all drivers related with your device and reinstall.
You can try run the SEUS (Sony Ericsson Update Service) first too if you want.
Click to expand...
Click to collapse
How do i remove all the drivers? PS: SEUS didn't work...doesn't recognise the phone either.
Peanutboy said:
How do i remove all the drivers? PS: SEUS didn't work...doesn't recognise the phone either.
Click to expand...
Click to collapse
Uninstall the PC Companion and check at control panel>programs & features search for any sony mobile driver, uninstall all.
Then restart ur computer and reinstall PC Companion.
butatx said:
Uninstall the PC Companion and check at control panel>programs & features search for any sony mobile driver, uninstall all.
Then restart ur computer and reinstall PC Companion.[/QUOT]
did everything you said...and when trying to get flashmode, it says the same "device not recognised"
Click to expand...
Click to collapse
Have u try hard reset ur device? Try Google how to
Sent from my C6503 using Tapatalk 4
Never let your battery go below 6%.
Below that, it turns off to safe the battery. ( if the battery ever reaches true zero charge it will be irreversibly damaged ).
Gesendet von meinem Xperia ZL
Sirence said:
Never let your battery go below 6%. provide
Gesendet von meinem Xperia ZL
Click to expand...
Click to collapse
my phone has reached absolute zero many times what evidence or proof of irreversible damage can you provide us?
sirsmokey said:
my phone has reached absolute zero many times what evidence or proof of irreversible damage can you provide us?
Click to expand...
Click to collapse
I'm pretty sure your battery has never reached 0% yet as android doesn't let that happen. You would have to leave the battery off for about a year to get that. What you mean is you let your phone shut down when the battery ran low. Even if it shows you 0% it Still has about 6% left that you can't use to safe the battery. If it's truly empty it is truly dead and can never be charged again.
But still, it is also not healthy to let your battery run down till the phone switches off. http://gizmodo.com/how-to-take-care-of-your-smartphone-battery-the-right-w-513217256
Also, read this http://forum.xda-developers.com/showthread.php?t=1168036
Those are well written tips with easily understandable explanations.
If you want to know more about it search 'lithium-ion battery' or 'smartphone charging cycles'
Gesendet von meinem Xperia ZL
sirsmokey said:
my phone has reached absolute zero many times what evidence or proof of irreversible damage can you provide us?
Click to expand...
Click to collapse
hey, did you ever have the same problem i'm having? if so...PLEASE TELL ME WHAT YOU DID TO FIX IT, i've been triying for almost 3 days in a row for something to happen and it just doesn't .
Thanks in advance.
PS: I can get into "a normal phone screen", the phone shows 1% battery left, but it just doesn't recognise the charger, which is weird, because when it turns off, the only way to boot it up is to connect the device...so it's like my phone has amnesia when it's in normal mode.
well, if anyone cares i managed to successfully flash the latest firmware on the phone, however the bootloops and charger not connected message still happens...I SERIOUSLY WANT TO SUICIDE RIGHT NOW, i loved my phone and now it's nothing more than a bootloop machine. IF ANYONE KNOW WHAT COULD I DO TO REPAIR IT, PLEASE HELP
Peanutboy said:
well, if anyone cares i managed to successfully flash the latest firmware on the phone, however the bootloops and charger not connected message still happens...I SERIOUSLY WANT TO SUICIDE RIGHT NOW, i loved my phone and now it's nothing more than a bootloop machine. IF ANYONE KNOW WHAT COULD I DO TO REPAIR IT, PLEASE HELP
Click to expand...
Click to collapse
So now ur phone can enter flashmode? Do you know how to flash kernel on via flashtool? Have u try to re-flash kernel only via flashtool?
Sent from my Z10 using Tapatalk 2
---------- Post added 16th August 2013 at 12:00 AM ---------- Previous post was 15th August 2013 at 11:48 PM ----------
I'm afraid ur phone micro usb port got problem, have you try to hold and move a bit the usb cable near the port?
Have u try to use other computer also?
Sent from my Z10 using Tapatalk 2
butatx said:
So now ur phone can enter flashmode? Do you know how to flash kernel on via flashtool? Have u try to re-flash kernel only via flashtool?
Sent from my Z10 using Tapatalk 2
---------- Post added 16th August 2013 at 12:00 AM ---------- Previous post was 15th August 2013 at 11:48 PM ----------
I'm afraid ur phone micro usb port got problem, have you try to hold and move a bit the usb cable near the port?
Have u try to use other computer also?
Sent from my Z10 using Tapatalk 2
Click to expand...
Click to collapse
I have just one computer , but i doubt it's the micro usb, as it recognises the cable of the pc, and because of that it can turn the red led on, otherwise, when not connected it only shows a red led 3 times and then nothing. So, i can do things only if the cable is connected, that's why i don't get what's happening, because it can recognise the cable enough to turn the red light and boot and everything, but the moment i try to charge it on a normal screen...nothing happens
I just re-flashed only the kernel and problem is still here...i tried connecting cable (different cables) to pc/wall charger...and nothing.
Peanutboy said:
I have just one computer , but i doubt it's the micro usb, as it recognises the cable of the pc, and because of that it can turn the red led on, otherwise, when not connected it only shows a red led 3 times and then nothing. So, i can do things only if the cable is connected, that's why i don't get what's happening, because it can recognise the cable enough to turn the red light and boot and everything, but the moment i try to charge it on a normal screen...nothing happens
I just re-flashed only the kernel and problem is still here...i tried connecting cable (different cables) to pc/wall charger...and nothing.
Click to expand...
Click to collapse
So, what I understood is ur phone now can enter flashmode? So ur problem regarding flashmode already solved?
But the PC still don't recognise ur phone and ur phone cannot charge while phone is ON but can charge while it OFF. I assume ur bootloop problem also solved?
Am I correct?
Sent from my Z10 using Tapatalk 2

Categories

Resources