Develop Bugs

Is the Pri Update still causeing roaming issues?

i just updated my Pri. but i have yet to run into this and a may be doing a bit of driving soon should i be worried?

If it happens, just call Sprint from a landline, and they'll do some reconfiguring on their end, and have you do a factory data wipe. Just make sure to back everything up first!

I just updated mine last night and now im unable to data or voice roam on the cm6 forced roam setting. I think I'm going to revert back to the old one as soon as I have time to figure out how to do it.

drmacinyasha said:
If it happens, just call Sprint from a landline, and they'll do some reconfiguring on their end, and have you do a factory data wipe. Just make sure to back everything up first!
Click to expand...
Click to collapse
I did a factory wipe and it didn't work. Did you call sprint while running cm6?

mattickus2 said:
I just updated mine last night and now im unable to data or voice roam on the cm6 forced roam setting. I think I'm going to revert back to the old one as soon as I have time to figure out how to do it.
Click to expand...
Click to collapse
krazyflipj said:
I did a factory wipe and it didn't work. Did you call sprint while running cm6?
Click to expand...
Click to collapse
Yes, just call Sprint (both of you). Tell them that your PRI just upgraded from 1.34 to 1.40, and now whenever you roam, your data doesn't go through, and when you make calls, you just get a message from Verizon saying they can't authorize your phone. The guy didn't ask me anything else.

Settings/system updates/profile update, then a reboot fixed it for me.

Thanks, I'll flash back to fresh and try that.
Edit: I also called sprint and it fixed my issue. I had to setup google voice as my voicemail again though.

So after I called sprint I can go on internet while roaming but I can't make or receive phone calls. I updated profiles and that didn't do anything. I will try and give sprint a call again
*UPDATE* I called Sprint again and they fixed the issue for me
Sent from my PC36100 using XDA App

did you do it thru cm6 or did you flash back to stock rooted rom when you called sprint

deviouskater said:
did you do it thru cm6 or did you flash back to stock rooted rom when you called sprint
Click to expand...
Click to collapse
I flashed back to latest fresh rom
Sent from my CM6 powered device

i called they didnt know what to do will call back later

deviouskater said:
i called they didnt know what to do will call back later
Click to expand...
Click to collapse
I went thru a total of 3 sprint cs ppl before they were able to fix.
Sent from my CM6 powered device

The moron rep I got says roaming is not available in my area. WTF.

[Q] Can only make calls in Roaming mode

So I have been using ICS starting with FD05 upgraded to FD10 and started having issues a few days after i upgraded... until today I cant make any calls but only in roaming mode... downgraded to EL29 and even went completely stock with no root to see if I could get a system update or anything.. and no luck.. sometimes it will let me update prl and profile.. but other times it errors out...also for a second it seemed if I turned off 3g service my calls work connect to sprint service.. but I couldn't simulate that so called fix again..
my plr is 60686 near the Seattle area if that makes any diff...
missed a call from work and almost lost my job because of this... any help would be great...
I seen some new post about prl... but nothing really what I am experiencing..

Jeepguyxj said:
So I have been using ICS starting with FD05 upgraded to FD10 and started having issues a few days after i upgraded... until today I cant make any calls but only in roaming mode... downgraded to EL29 and even went completely stock with no root to see if I could get a system update or anything.. and no luck.. sometimes it will let me update prl and profile.. but other times it errors out...also for a second it seemed if I turned off 3g service my calls work connect to sprint service.. but I couldn't simulate that so called fix again..
my plr is 60686 near the Seattle area if that makes any diff...
missed a call from work and almost lost my job because of this... any help would be great...
I seen some new post about prl... but nothing really what I am experiencing..
Click to expand...
Click to collapse
Your post was a little hard to follow. You have used the one-click odin to go back to a stock rooted rom and are still having problems, is that correct?

Try this
##72786# then enter your MSL code then click okay to reset data. This will only reset and re-provision/activate your phone to Sprint. This will create a new profile on Sprints network and will give you any new network settings that may have changed in your area
1. Download "Terminal Emulator" from the app market.2. Open Terminal Emulator.3. type in getprop ril.MSL (make sure the .MSL is capitalized)4. Press enter and poof, you have your MSL code.
Helps to not use swype .....while doing this as Swype will capitalize the i in ril
Sent from my SPH-D710 using Tapatalk 2 Beta-6

Epix4G said:
Try this
##72786# then enter your MSL code then click okay to reset data. This will only reset and re-provision/activate your phone to Sprint. This will create a new profile on Sprints network and will give you any new network settings that may have changed in your area
1. Download "Terminal Emulator" from the app market.2. Open Terminal Emulator.3. type in getprop ril.MSL (make sure the .MSL is capitalized)4. Press enter and poof, you have your MSL code.
Helps to not use swype .....while doing this as Swype will capitalize the i in ril
Click to expand...
Click to collapse
Great info. Will this have any other affect other than reprovisioning the phone?

tdunham said:
Great info. Will this have any other affect other than reprovisioning the phone?
Click to expand...
Click to collapse
Not that i know of .... Then do a prl and profile update....
Sent from my SPH-D710 using Tapatalk 2 Beta-6

Epix4G said:
Try this
##72786# then enter your MSL code then click okay to reset data. This will only reset and re-provision/activate your phone to Sprint. This will create a new profile on Sprints network and will give you any new network settings that may have changed in your area
1. Download "Terminal Emulator" from the app market.2. Open Terminal Emulator.3. type in getprop ril.MSL (make sure the .MSL is capitalized)4. Press enter and poof, you have your MSL code.
Helps to not use swype .....while doing this as Swype will capitalize the i in ril
Sent from my SPH-D710 using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
Dang Was hopeful that this was going to work... Did everything you said and I still cant make sprint network calls only roaming... tho now it updated prl and profile very fast.. just wont let me make phone calls...

Jeepguyxj said:
Dang Was hopeful that this was going to work... Did everything you said and I still cant make sprint network calls only roaming... tho now it updated prl and profile very fast.. just wont let me make phone calls...
Click to expand...
Click to collapse
Next is to use Odin to flash modem and then see if it still don't work
Sent from my SPH-D710 using Tapatalk 2 Beta-6

Epix4G said:
Next is to use Odin to flash modem and then see if it still don't work
Sent from my SPH-D710 using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
Ive already flashed a EL29 modem and still no luck
Im on EL29 GB complete stock no root or anything... should I reflash the same modem (EL29) or go with like EL26?
also I chatted with sprint today and they said there is an outage in my area and it started today at 12:00... even tho my issue started yesterday at 4pm ish... looks like im going to have to wait to see if they fix it on there side before I can say there is something wrong on my end... THANKS SPRINT!!!

Jeepguyxj said:
Dang Was hopeful that this was going to work... Did everything you said and I still cant make sprint network calls only roaming... tho now it updated prl and profile very fast.. just wont let me make phone calls...
Click to expand...
Click to collapse
You didn't associate your phone with google voice at any point did you? Caused me a ton of problems.
Sent from my SPH-D710 using XDA

tdunham said:
Your post was a little hard to follow. You have used the one-click odin to go back to a stock rooted rom and are still having problems, is that correct?
Click to expand...
Click to collapse
So basically... Last week i was running ICS FD05 for a few days and then upgrade fresh install to FD10 ICS... Monday this week I missed a phone call around 5AM for my work.. didn't think about it much...
but yesterday I was having issues with getting text and sending them... with double sending and just not sending at all.. so I figured maybe its the new leak that messed up so I went back to stock rooted EL29 with one click (done it before several times) but went I went back it seemed that I cant make phone calls to my Voicemail or anyone else for that matter unless I was roaming...
I have tried flashing back to an ICS build and that hasn't helped... also I reinstalled a 60686 prl from a post in development (thought that my prl was corrupt) and also did a factory reset with my MSL number like Epix4g told me to do.
and No never used google voice at all.. was thinking about it after this fiasco... but staying away till i get a better picture of whats going on

Jeepguyxj said:
No never used google voice at all.. was thinking about it after this fiasco... but staying away till i get a better picture of whats going on
Click to expand...
Click to collapse
FYI, I can relate with you. For the last several weeks I can't recieve phone calls or voicemails. The problem has been intermittent. Calls drop straight to voicemail and I'll get the visual voicemail notification hours later.
I can't blame this one on ICS, I've been using GB roms and it's happened on several (worth a try). But I swear it started happening after I thought I'd give Gvoice a try. Getting rid of it is a different conversation. I've been back and forth with Sprint a few times too. Just got off of the phone a few minutes ago because it happened again today.
Keep me apprised too.

I don't have any problem with gv but I don't inter grate it with sprint I just use the voice mail part ....when u first install just click skip and then go from there .... I hated it making u hit 1 to answer and the look of the text part ....it is OK for just voicemail though to me
Sent from my SPH-D710 using Tapatalk 2 Beta-6

Going about 30miles away from my house to see if it has anything to do with the cell tower.. wish me luck..

Jeepguyxj said:
Going about 30miles away from my house to see if it has anything to do with the cell tower.. wish me luck..
Click to expand...
Click to collapse
LOL, bring back some hot wings please.
Sent from my SPH-D710 using XDA

tdunham said:
LOL, bring back some hot wings please.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Well I get great service anywhere else other than my house... I do think that my prl was corrupt.. but im going to flash the new FD16 ICS and call it good....
and tdunham... all I have is a half ate bag of funyuns... sorry no wings for you!...lol
so im going to give sprint a few days to fix their tower before I give them hell for bad service... thanks for your help all

Update to my problem
So if anyone cares I still don't have a native signal from sprint in my house.. they say that are still working on it and cant find the problem... so sprint tech support sent me an Airave ... hooked it up today... I get full bars now and pretty clear signal (just don't stand in front of it) and best of all no fee and no monthly charges unless you have an issue with credit then they charge you 5 bucks a month
the only things that suck with this is that when you make or get a call it has 3 beeps (letting you know that you are on the Airave signal)
also if you are roaming you get the same 3 beeps but you have a triangle above your signal bars
but non the less no more dropped calls from my house and has built in GPS
So if you have a weak signal or or none at all this might be right up your ally.
It seems that you get your signal from your high speed internet so make sure you have that before getting an Airave... thanks for all your help!

[Q] steady modem?

anyone else having an issue with not recieving phone calls randomly? ppl tell me they call and i've called myself and get no ring what so ever. ive tried several diff modems....any suggestions/fixes?

Go to your settings > About phone.
Tell me what Baseband, Kernal, Build, Mod version (etc.) you are running.

Stick to el29
Sent from my SPH-D710 using xda premium

lisac2100 said:
anyone else having an issue with not recieving phone calls randomly? ppl tell me they call and i've called myself and get no ring what so ever. ive tried several diff modems....any suggestions/fixes?
Click to expand...
Click to collapse
Hi Lisa. Like Peanut said, please provide us with additional info.
As for my personal problem with this, I had this problem for weeks running 2 different Gingerbread roms. Calls just would go straight to voicemail, everything else worked fine (texting, outgoing calls). I ended up calling Sprint and having them walk me through a full re-provisioning of the phone with ##72786# and also ##501435# to fully resolve my issue.
I won't post the rest of the details on how to do it because you need additional information to accomplish this and it's just easier to have Sprint walk you through all the steps.

peanut1596 said:
Go to your settings > About phone.
Tell me what Baseband, Kernal, Build, Mod version (etc.) you are running.
Click to expand...
Click to collapse
hi first thank you for the fast responses.
ok i was running a gb based rom but curently im on the ics "slim n trim" (loving it by the way for the most part) ive played with soooo many diff modems and nothing seems to work. its very random but i still have this issue. some calls i just dont get.
rom based: aokp
baseband: el29
kernal: fd26

tdunham said:
Hi Lisa. Like Peanut said, please provide us with additional info.
As for my personal problem with this, I had this problem for weeks running 2 different Gingerbread roms. Calls just would go straight to voicemail, everything else worked fine (texting, outgoing calls). I ended up calling Sprint and having them walk me through a full re-provisioning of the phone with ##72786# and also ##501435# to fully resolve my issue.
I won't post the rest of the details on how to do it because you need additional information to accomplish this and it's just easier to have Sprint walk you through all the steps.
Click to expand...
Click to collapse
if i flash a gb based rom, walk through these steps and go back to an ics, will the settings still be set (##)? like when i do a prl update?

lisac2100 said:
if i flash a gb based rom, walk through these steps and go back to an ics, will the settings still be set (##)? like when i do a prl update?
Click to expand...
Click to collapse
Yes, the settings will follow you through different ROMs. It probably would be best to be on GB when you do it. I don't know how it will affect AOKP. You will need your MSL and MSID if you try to do it yourself. That's why I suggested just calling Sprint, letting them know your problem (and just let them know someone suggested those 2 steps, you never know the level of expertise you get on the other end). It's just easier that way. Like I said, I didn't want to post the complete steps in case I missed something necessary and it caused you other problems.

OK dude try this.
Download fd19 modem.bin
Go into Odin mode
Flash fd19 modem into phone slot of Odin.
Let it run through phase and reboot.
See if it helps.
Idk why you are still on el29. It sucked eggs for me, but that's just me.
EDIT: here's the link. Just open the zip and pull the modem.bin file and follow these instructions.
http://tinyurl.com/cv4yqwg
Sent from my SPH-D710 using XDA

peanut1596 said:
OK dude try this.
Download fd19 modem.bin
Go into Odin mode
Flash fd19 modem into phone slot of Odin.
Let it run through phase and reboot.
See if it helps.
Idk why you are still on el29. It sucked eggs for me, but that's just me.
EDIT: here's the link. Just open the zip and pull the modem.bin file and follow these instructions.
http://tinyurl.com/cv4yqwg
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
i was on fd19, wasnt getting good speeds and thought that was maybe the reason i wasnt recieving calls..i've tried several diff modems. i'll go bk to fd19 and see how that works

lisac2100 said:
i was on fd19, wasnt getting good speeds and thought that was maybe the reason i wasnt recieving calls..i've tried several diff modems. i'll go bk to fd19 and see how that works
Click to expand...
Click to collapse
It varies for everybody. Fd19 works best for me. That's the only reason I suggested it
Sent from my SPH-D710 using XDA

tdunham said:
Hi Lisa. Like Peanut said, please provide us with additional info.
As for my personal problem with this, I had this problem for weeks running 2 different Gingerbread roms. Calls just would go straight to voicemail, everything else worked fine (texting, outgoing calls). I ended up calling Sprint and having them walk me through a full re-provisioning of the phone with ##72786# and also ##501435# to fully resolve my issue.
I won't post the rest of the details on how to do it because you need additional information to accomplish this and it's just easier to have Sprint walk you through all the steps.
Click to expand...
Click to collapse
ok so i called sprint..they said that first code does a factory reset which i did..they said they have no clue what the second code is..can you provide the steps if you have the time?

Simple answer? Sprint sucks. All the phones I've had on sprint have done this
Sent from my SPH-D710 using xda premium

lisac2100 said:
ok so i called sprint..they said that first code does a factory reset which i did..they said they have no clue what the second code is..can you provide the steps if you have the time?
Click to expand...
Click to collapse
Sure thing. Call Sprint tech support and tell them you're reprovisioning your phone and need the MSID phone number.
From Dialpad ##501435#
Select 'Edit'
Select 'Touch Here'
Enter YOUR cell phone number on the virtual kepad that comes up and press the return key on the bottom right of the virtual keypad.
MSID
0000000000
Will be displayed on screen.
Once again select 'Touch Here'
Enter your MSID on the virtual keypad that comes up (it looks like a cell phone number, for example mine is 7272780149 for my phone. That's not my phone # btw )
Press the return key on the bottom right of the virtual keypad.
Select 'Done' and the phone will reboot.
Edit: Update your PRL & Profile once this has between completed and manually reboot your phone.

hmm...doesnt seem to do anything when i put in the ##...

lisac2100 said:
hmm...doesnt seem to do anything when i put in the ##...
Click to expand...
Click to collapse
Aw Lisa you're killing me, I thought you were going back to GB.
You're not still on AOKP are you? Umm, well try *#*#501435#*#*
with all the extra characters. If it doesn't work guess you'll have to go back to Gingerbread for that. Sorry.
Edit: You're putting that into the phone dialpad right?

I'm having an issue with calls and not being able to send text and they tell me that it's because some towers are getting updated and I'll continue to have this problem until the end of June call sprint and see if they are doing anything to the towers around your area
Sent from my SPH-D710 using xda premium

Might not be your modem, you could just be in a bad service area. Call sprint to tell them and see if they can give you an airave. Works wonders at home. Some people said they try to charge for it but they sent me one with no charges.
Sent from my SPH-D710 using XDA

can receive MMS but not send

This started a while ago. Even using Handcent I can receive MMS but not send it out. It says that they have been sent but they never get received on the other end. It worked perfectly until I flashed to FC24, and I just installed CM9 thinking it would help but it didn't.
It's a SPH-D710 on Sprint network
I already tried deleting the telephony.db file clearing data/cache and rebooting. That didn't help. I found a BoostMobileMMSFix.zip but I'm assuming that won't work for me, even though they were describing the same problem. So I'm a at a loss. Any help would be awesome. I saw references to a ##DATA# method for this problem but couldn't actually find out how to implement it.
Thanks a lot

I can't imagine that I am the only person out there on the Sprint network that this has happened to. Hopefully someone will be able to shed some on the situation soon.
Question---- if I updated with the BoostMobileMMSFix.zip... would it do something horrible to my phone? Or would it simply not work? Is it worth trying?
-dt

Hi, a similar thing happened to me recently on my phone and it turned out that because it is a work phone they changed the settings for my phone to block outgoing mms. Is your phone a work phone? Have you tried restoring your nandroid backup (I assume you have one) of your original ROM and checking to see if it works on that? If it doesn't then its something on the carrier side of things :/
Sent from my HTC One S using xda app-developers app

Well I don't think it's something on the carrier side of things, because it started happening IMMEDIATELY after I flashed out of my stock ROM. Unfortunately, I don't have a nandroid backup because when I started this endeavor I was such a NOOOB and I did it hastily.

Could this be an NVRAM issue? Would it be worth resetting that? If so, can you tell me how please?
Sent from my SPH-D710 using xda app-developers app

doctordeetz said:
Could this be an NVRAM issue? Would it be worth resetting that? If so, can you tell me how please?
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Have you tryied going back to a stock rom and seeing if thats fix your problem?

blazedmasta said:
Have you tryied going back to a stock rom and seeing if thats fix your problem?
Click to expand...
Click to collapse
Which stock ROM should I go back to? I am new to all this. I flashed away from my stock without even knowing what it was

doctordeetz said:
Which stock ROM should I go back to? I am new to all this. I flashed away from my stock without even knowing what it was
Click to expand...
Click to collapse
Go here
http://forum.xda-developers.com/showthread.php?t=null
Read that figure out which works best for you, odin and presto, you should be good 2 go
sent from my SGS2 running AOKP, eh...

Sounds like bad apn settings. Could have an incorrect apns-conf.xml file or your telephony.db file in data may be currupt. Try deleting that.
Sent from my Ally using xda app-developers app

brooksyx said:
Sounds like bad apn settings. Could have an incorrect apns-conf.xml file or your telephony.db file in data may be currupt. Try deleting that.
Sent from my Ally using xda app-developers app
Click to expand...
Click to collapse
So I just went all the way back to EK02 and still could not send MMS. After a few Sprint auto-updates I'm in ICS again with FH13. Still no MMS. I tried to update the APN settings (while I was still in CM9 before I flashed to EK02), but I don't think I did it right. I updated the settings to what I found here (http://androidforums.com/evo-4g-sup...86-fixed-sprint-mms-problem-apn-settings.html) but that did not help. Every time I saved it I went from having Sprint listed in the APN settings to having nothing. In other words, it disappeared. Currently thinking I will just stay here till I figure it out. Maybe call my carrier (which is actually CREDO, but it's on the Sprint network)... could be something on their end, right?

doctordeetz said:
So I just went all the way back to EK02 and still could not send MMS. After a few Sprint auto-updates I'm in ICS again with FH13. Still no MMS. I tried to update the APN settings (while I was still in CM9 before I flashed to EK02), but I don't think I did it right. I updated the settings to what I found here (http://androidforums.com/evo-4g-sup...86-fixed-sprint-mms-problem-apn-settings.html) but that did not help. Every time I saved it I went from having Sprint listed in the APN settings to having nothing. In other words, it disappeared. Currently thinking I will just stay here till I figure it out. Maybe call my carrier (which is actually CREDO, but it's on the Sprint network)... could be something on their end, right?
Click to expand...
Click to collapse
Sounds to me like you are using sprints apn settings and not credo's...
Edit: this might help: http://mobility.forumsee.com/a/m/s/...-for-enabling-mms-for-sprint-mobile-roms.html

brooksyx said:
Sounds to me like you are using sprints apn settings and not credo's...
Edit: this might help: http://mobility.forumsee.com/a/m/s/...-for-enabling-mms-for-sprint-mobile-roms.html
Click to expand...
Click to collapse
Good call on that one. I assumed since they're on the same network they'd use the same settings. They don't. But I still have a problem. I am on CM9, so I can't use a third party app to restore APNs.
I found CREDO's settings here http://forum.xda-developers.com/showthread.php?t=1824916
However, the list of parameters in the xml there does not match the settings I can modify in the APNs manually in CM9 (accessing it through Voice Dial). Is there another way to restore APNs in CM9? Or can I some how flash backward to Gingerbread, restore, and then flash back without changing the APNs?
Please help, I feel like I'm getting so close to figuring this out!
EDIT: brooksyx -- your link goes to the same post on a different site. i didn't see that before i found the one here. Thanks for searching for me!

no luck yet?
doctordeetz said:
This started a while ago. Even using Handcent I can receive MMS but not send it out. It says that they have been sent but they never get received on the other end. It worked perfectly until I flashed to FC24, and I just installed CM9 thinking it would help but it didn't.
It's a SPH-D710 on Sprint network
I already tried deleting the telephony.db file clearing data/cache and rebooting. That didn't help. I found a BoostMobileMMSFix.zip but I'm assuming that won't work for me, even though they were describing the same problem. So I'm a at a loss. Any help would be awesome. I saw references to a ##DATA# method for this problem but couldn't actually find out how to implement it.
Thanks a lot
Click to expand...
Click to collapse
hey doctor no luck on this issue yet? iam on the same boat looking to get my MMS to work on boost mobile and i had no luck. well i did if i went all the way back to EL29 and edite the DATA on the MMSURL to mm.myboostmobile.com and it work. but iam using this stock Fh13 its beeing a nightmare looking for a fix. iam able to recieved but not to send MMS it says he same thing as you. that they get sent but nobody gets it. any ideas yet bro?

latinlover515 said:
hey doctor no luck on this issue yet? iam on the same boat looking to get my MMS to work on boost mobile and i had no luck. well i did if i went all the way back to EL29 and edite the DATA on the MMSURL to mm.myboostmobile.com and it work. but iam using this stock Fh13 its beeing a nightmare looking for a fix. iam able to recieved but not to send MMS it says he same thing as you. that they get sent but nobody gets it. any ideas yet bro?
Click to expand...
Click to collapse
cuz i had tryed this credo thing and the freaking apn app says that i cant delete or restore apns cuz its android 4.3 or what ever number is so iam still stocl on not sending mms on stock fh13 this so gay how they do this crap telling us what to do with are phones

Sorry if I missed you saying you tried this already. I had this issue a while back, the fix for me was to update the prl and profile via the system update settings.

Bannjio said:
Sorry if I missed you saying you tried this already. I had this issue a while back, the fix for me was to update the prl and profile via the system update settings.
Click to expand...
Click to collapse
thankss Bannjio for your reply. are u on boost mobile too? also are you using stock ICS FH13? cuz ill be honest i never tryed updating the profile or PRL to see if it fixed the problem. and now since i couldnt send MMS iam running the older gingerbread EL29 where my MMS works fine.. but if i can find a Fix for MMS to go back to FH13 ill be happy.cuz i do remember doing something like what you just told me but on my old EPc 4G . now since this a second generation of the Epic Touch i dont know if it is he same story. i just dont want to redo my phone again toFH13 and update the PRL or profile and endup with the same thing about no MMS again.. thanks

No problem, I can see not wanting to reflash only to have it not work. I am on sprint not boost mobile, and on a custom rom not stock fh13. However, the problem arose for me when I switched from an ics rom back to a gb rom. Mms didn't work on the gb rom until after I ran prl and profile update.
If you end up giving that a shot, be sure to let us know how it goes. Sorry I can't be of more direct help.

Bannjio said:
No problem, I can see not wanting to reflash only to have it not work. I am on sprint not boost mobile, and on a custom rom not stock fh13. However, the problem arose for me when I switched from an ics rom back to a gb rom. Mms didn't work on the gb rom until after I ran prl and profile update.
If you end up giving that a shot, be sure to let us know how it goes. Sorry I can't be of more direct help.
Click to expand...
Click to collapse
well guess what.first of all thanks for trying on helping me out.. but i was bored and diecided to reflash back the FH13 and did PRL and Profileupdated change the MMSURL to the boost mobile one and still no luck. iam able to recieve but not send. it says sent but nobody gets them... anyone else has a brilliant idea on how to fix this damn issue? to many people on boost mobile using this type of phone and nobody has an answer?

i am also having an MMS issue i am on ting and i think their apn is the same as sprint but i can't get mms to work to it says it sent but it is never received and i can't receive either.

gamikzone said:
i am also having an MMS issue i am on ting and i think their apn is the same as sprint but i can't get mms to work to it says it sent but it is never received and i can't receive either.
Click to expand...
Click to collapse
I also. Have been having the same problem but i flashed Mijjz blend fi25 rom n it worked but i noticed that it took awhile for the pictures to get thru.. Keep in mind that i was in a horrible 3g area n i didn't have acces to a wifi connection.. If any tries it n it works or not please post... Ill be trying it again in a better 3g area

[Q] Modem/radio issues?

So, last night, my phone stopped sending text messages. Out of NOWHERE this problem popped up. Tried rebooting a few times, still no messages could be sent (At the time, was using Sniper's PACman 19.3.0 ROM). This morning, I flashed the stock multiboot image, updated my profile, updated my PRL, and tried to send a message. Again, it was a no-go. So, I opened up my recovery (was an EL25 recovery, I believe), wiped data, cache, etc., then I went and flashed the 21.0.0 PACman ROM, flashed gapps, and flashed an FI25 modem. Booted up the phone, tried to send a message, still a nope. Tried to call someone, also a nope, as it just sits at "Dialling...".
I'm not sure what's going on, does anyone else have any ideas? :S
EDIT: Going to try to ODIN to a rooted EL29 and see if I can get results that way.
EDIT 2: Flashing to rooted EL29 did not help.
EDIT 3: I fixed my problem. I used ODIN to flash an EL29 kernel and recovery, as well as wipe my EFS at the same time. After that, I used a one-click to flash to EL29 rooted stock, updated profile, updated PRL, and everything was working! I went ahead and reflashed to PACman 21.0.0 and I can still call and send texts.

Not trying to be a smartass, but are you up to date on your mobile phone bill?

I have to agree... Did you pay your bill?
Sent from my SPH-D710 using xda app-developers app

graydiggy said:
I have to agree... Did you pay your bill?
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Even if it was a billing issue the call would still connect, just not to the party you want to reach.
Sent from my Slim E4GT using xda premium

My phone bill isn't due for four days, but we are up to date on the payments.
I fixed my problem. I used ODIN to flash an EL29 kernel and recovery, as well as wipe my EFS at the same time. After that, I used a one-click to flash to EL29 rooted stock, updated profile, updated PRL, and everything was working! I went ahead and reflashed to PACman 21.0.0 and I can still call and send texts.
What I'm really thinking about is why it all of a sudden stopped working correctly...it worked fine ALL day, and I made absolutely no changes to the ROM or anything, but calls and text just stopped working out of nowhere. At least I know how to fix it in the future, if it happens again.

So it appears I'm not out of the woods yet. Same problem has reappeared. Can't send texts, can't make or receive calls. Any ideas?

pirogoeth said:
So it appears I'm not out of the woods yet. Same problem has reappeared. Can't send texts, can't make or receive calls. Any ideas?
Click to expand...
Click to collapse
I've had this happen when a tower near my house was flaking. I thought it was my phone... It was a problem with the tower. Any other *sprint* phones in the household? Have you tried in a different area?

calisro said:
I've had this happen when a tower near my house was flaking. I thought it was my phone... It was a problem with the tower. Any other *sprint* phones in the household? Have you tried in a different area?
Click to expand...
Click to collapse
Two other Sprint phones in the house. If there were problems, my mom would be the first to complain about it. I just went ahead and wiped the EFS on my phone, updated profile and stuff, and I'm going to give it another shot. If this is in fact a tower problem, how can I get Sprint to take the hint that they need to get this **** fixed fast? >_>
EDIT: Well, I'm guessing it's a tower thing. After wiping everything, still no messages can be sent or anything.

I had the same thing happen to me in the Pittsburgh area a few weeks ago. Call tech support and they will start a ticket and get it resolved. They even credited me a weeks service for the inconvenience.
Sent from my SPH-D710 using XDA Premium App

How did you wipe EFS? I thought it had to be included in the tar package?

BAleR said:
How did you wipe EFS? I thought it had to be included in the tar package?
Click to expand...
Click to collapse
Used the "Phone EFS Clear" check box in Odin when I flashed an old EL29 recovery.

Hmm.. Never seen that option. What version of odin?
---------- Post added at 07:05 AM ---------- Previous post was at 07:01 AM ----------
Have you tryed ##72786# i think.
Then your msl. I forget whats its called but it resets something with your radio

pirogoeth said:
Two other Sprint phones in the house. If there were problems, my mom would be the first to complain about it. I just went ahead and wiped the EFS on my phone, updated profile and stuff, and I'm going to give it another shot. If this is in fact a tower problem, how can I get Sprint to take the hint that they need to get this **** fixed fast? >_>
EDIT: Well, I'm guessing it's a tower thing. After wiping everything, still no messages can be sent or anything.
Click to expand...
Click to collapse
if you call sprint they'll fill a trouble ticket. they did for me but its not likely if other sprint phones look ok. did you look at the other 2 phones while yours was having a problem?
also stay on a stock one click for a few days and see if it works. maybe something odd with pacman (which I'm running fine btw).

calisro said:
if you call sprint they'll fill a trouble ticket. they did for me but its not likely if other sprint phones look ok.
Click to expand...
Click to collapse
I asked my mom to try and send a text and try to call. Text failed, and the call took a good amount of time to connect. And it appears my dad is having problems as well.

pirogoeth said:
I asked my mom to try and send a text and try to call. Text failed, and the call took a good amount of time to connect. And it appears my dad is having problems as well.
Click to expand...
Click to collapse
ah hah!

BAleR said:
Hmm.. Never seen that option. What version of odin?
---------- Post added at 07:05 AM ---------- Previous post was at 07:01 AM ----------
Have you tryed ##72786# i think.
Then your msl. I forget whats its called but it resets something with your radio
Click to expand...
Click to collapse
I'l have to try the ##72786# at some point. But I'm using Odin3 v1.85. You can download it from here.

Ya thats the one i got. Must have missed that option