Related
hello
moto defy is my first android device.
i installed the latest 2.3.4 GB on it using this: http://forum.xda-developers.com/showpost.php?p=14925851&postcount=72
It was nice and was working well. but i had to go back to froyo and so, i installed system recovery again on Gingerbread. then i tried to boot through it, but it wouldn't boot to the recovery screen. so i tried to wipe data and cache using the moto recovery. then using the rsd lite tool, i flashed the fixed sbf. then im not able to get into the phone now.
it asks for motoblur setup and when i skip it, it says, The application Accounts(process com.motorola.setup) has stopped unexpectedly. Please try again.
with a Force close button. when i force close, motoblur setup first page comes again.
I even tried to register for a new motoblur account, but no luck it goes to the end and stops. i registered new account on pc and used it on the phone. it goes updating and again the error pops up.
I tired many things like starting from scratch. wiping all data + cache, but no luck. Please help me.
If you flash a fixed SBF you have to replace the filesystem with a nandroid backup.
since you couldn't reach clockwork recovery you should have now a froyo fixed SBF with a file system from ginger... that doesn't work.
You now have the two options to try...
- flash ginger sbf again (clear cache, davlik, factory reset etc. first) trie to boot the ginger-system. After that find a clockwork recovery or 2ndInit for Ginger.
- flash a whole stock rom (full SBF) with RSD-Lite ... if anything has been replaced with original files it should be back...
i tried ginger sbf, the shadow4.5.1-134fixed.sbf. no luck. same thing.
tried downloading again and flashed, still same.
for option 2, if i do so, i would loose downgradability to froyo right? could you just provide me a link for the full sbf? i dont want to do something stupid again. sorry.
If i flash froyo full sbf, will it work?
Edit:
YAY!! i downloaded full sbf and flashed using rsd lite. now im on stock froyo. pheew!!
just in case anyone needs the froyo without blur i.e UAE for dowload: http://forum.xda-developers.com/showpost.php?p=14682923&postcount=1
Just wipe all then reboot, get to bootloader by using vol up+power, flash using rsdlite and again wipe all and reboot.
I installed the rom 6 times. different ways to try and install. redownloaded the file but no matter how i try it, after the boot animation screen, the screen goes blank like it shut off.
im on CWM 5.0.2.3
What version of starburst did you flash?
Sent from my SPH-D710 using XDA App
sleshepic said:
What version of starburst did you flash?
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
1.9 then 1.9.5
If you continue to hit walls you can always try going back to stock and starting over. Some on the starburst forum have had luck with that. And you didn't wipe data or format system between 1.9 and 1.9.5? Only cache and dalvik?
Sent from my SPH-D710 using XDA App
kyhassen said:
1.9 then 1.9.5
Click to expand...
Click to collapse
Do you have a mirror for the 1.9?........deleted by accident.
yang704 said:
Do you have a mirror for the 1.9?........deleted by accident.
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=G7bC9qXqpg4&feature=youtu.be
have both 1.9 and 1.9.5
also i did wipe everything. after i did 1.9 booted up. went back to recovery and wiped Dcache and cache and still bugged.
an now with other roms i cant install kernals.. any idea?
kyhassen said:
I installed the rom 6 times. different ways to try and install. redownloaded the file but no matter how i try it, after the boot animation screen, the screen goes blank like it shut off.
im on CWM 5.0.2.3
Click to expand...
Click to collapse
Having the same issue
epic touch (loading starburst rom) shows the galaxy S boot like it should, then the screen seems to just go blakc, doesnt go into a boot cycle. I formatted the system , wipe data, wipe cache, wipe dalvik , in that order.
My procedure. Load odin, wipe the current zedomax kernal.tar with the root.
Root works great. Then flash the 6.1 zedo max ( for CM5 ). After that, i try to flash the staburst rom and it wont boot back up. i tried using the Lost kernal too.
I'm familiar with recovering it, so i'm able to get back to my backup and unroot the device no problem, just need help fixing the root. On my old EPIC, i had to do the one click root my self, then roms would load fine. please help!
---------- Post added at 10:47 PM ---------- Previous post was at 10:19 PM ----------
also on the video link from qbking77 on how to flash this rom
quite a few epic touch users are having the same problem =\
did u format the system before you wiped?
Same thing here. All I get.is boot animation then black screen. Bunk rom or something because ive tried everything. I've given up on this rom bit I really was looking forwatd to having tbis rom on my phone
If somebody finds a solution please post!
HELP...
Im having the same issue... i tried the starburst rom and once past the boot animation it goes black so i booted into recovery and tried to restore my nand and it isnt there like it was wiped during rom install... ok so after that i stayed in recorery downloaded the latest viper rom, flashed and the same thing happened.. i wiped\factory reset wiped dcache and cache every time i try a new rom... PLEASE HELP i just bought this phone from a freind and decided to root and now i cant even make my first call on it...
1. Boot into CWM recovery and make a Nandroid backup.
2. Format system under mounts and storage.
3. Wipe data/factory reset.
4. Wipe cache partition.
5. Wipe Dalvik cache under advanced.
6. Install StarburstROM. IF COMING FROM 1.8 YOU MUST FOLLOW THE ABOVE STEPS EACH TIME THEN INSTALL 1.9. THEN DO THE SAME AND INSTALL 1.9.5.
7. Wiping data may not be necessary but I would do it anyways then reboot, let it run for a few minutes, boot back into CWM and from the advanced restore menu restore just your data from the Nandriod backup you made.
---------- Post added at 01:00 PM ---------- Previous post was at 12:48 PM ----------
tobiasunruh said:
Im having the same issue... i tried the starburst rom and once past the boot animation it goes black so i booted into recovery and tried to restore my nand and it isnt there like it was wiped during rom install... ok so after that i stayed in recorery downloaded the latest viper rom, flashed and the same thing happened.. i wiped\factory reset wiped dcache and cache every time i try a new rom... PLEASE HELP i just bought this phone from a freind and decided to root and now i cant even make my first call on it...
Click to expand...
Click to collapse
Your Nandroid is still there it's just on your internal SD card. If you were using a kernel with an early version of CWM it backed up to the internal SD card. The latest version the dev's are incorporating into their ROMs now backs up to the external SD card. Just Odin back to whatever previous ROM/kernel you were on then boot up and copy the Clockwork folder to your external SD card. Then follow the directions I posted above for flashing StarburstROM.
IA-32e said:
1. Boot into CWM recovery and make a Nandroid backup.
2. Format system under mounts and storage.
3. Wipe data/factory reset.
4. Wipe cache partition.
5. Wipe Dalvik cache under advanced.
6. Install StarburstROM. IF COMING FROM 1.8 YOU MUST FOLLOW THE ABOVE STEPS EACH TIME THEN INSTALL 1.9. THEN DO THE SAME AND INSTALL 1.9.5.
7. Wiping data may not be necessary but I would do it anyways then reboot, let it run for a few minutes, boot back into CWM and from the advanced restore menu restore just your data from the Nandriod backup you made.
---------- Post added at 01:00 PM ---------- Previous post was at 12:48 PM ----------
Your Nandroid is still there it's just on your internal SD card. If you were using a kernel with an early version of CWM it backed up to the internal SD card. The latest version the dev's are incorporating into their ROMs now backs up to the external SD card. Just Odin back to whatever previous ROM/kernel you were on then boot up and copy the Clockwork folder to your external SD card. Then follow the directions I posted above for flashing StarburstROM.
Click to expand...
Click to collapse
Thanks for the help but I'm new to Samsung devices... Can you give instructions on how to restore with Odin?
Edit... I just check my external and it has a clock work folder on it.. The only thing in it is a file named ".salted_hash" and that's it..
Sent from my PG86100 using xda premium
tobiasunruh said:
Thanks for the help but I'm new to Samsung devices... Can you give instructions on how to restore with Odin?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Here's an excellent tutorial. This is my first Samsung device as well and the directions are pretty clear cut. I used Windows 7 64 Bit.
http://forum.xda-developers.com/showthread.php?t=1274337
---------- Post added at 01:38 PM ---------- Previous post was at 01:20 PM ----------
tobiasunruh said:
Edit... I just check my external and it has a clock work folder on it.. The only thing in it is a file named ".salted_hash" and that's it..
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Bummer man. Not sure how that happened unless you formatted your SD card accidentally.
IA-32e said:
Here's an excellent tutorial. This is my first Samsung device as well and the directions are pretty clear cut. I used Windows 7 64 Bit.
http://forum.xda-developers.com/showthread.php?t=1274337
---------- Post added at 01:38 PM ---------- Previous post was at 01:20 PM ----------
Bummer man. Not sure how that happened unless you formatted your SD card accidentally.
Click to expand...
Click to collapse
Do you think you could point me in the right direction to start over from stock? Like a tutorial on how to start over with a new boot image or a way to get past the boot animation?
Sent from my PG86100 using xda premium
tobiasunruh said:
Do you think you could point me in the right direction to start over from stock? Like a tutorial on how to start over with a new boot image or a way to get past the boot animation?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Everything you need is in the Android Development section.
http://forum.xda-developers.com/showthread.php?t=1282420
IA-32e said:
Everything you need is in the Android Development section.
http://forum.xda-developers.com/showthread.php?t=1282420
Click to expand...
Click to collapse
Thanks I'll give it a try.. Let you know what happens..
Edit...
That worked.. I'm back to stock with no root.. Thanks for the help greatly appreciated...
Sent from my PG86100 using xda premium
well i finally got my starburst rom working... but why does the media not. i cant play music, veiw pictures, or play videos.
Is that v1.9.5? If so what version did you upgrade from? People are having some problems when upgrading to 1.9.5.
Same issue. Tried multiple times, followed instructions to a T. Phone just goes black after flashing Starburst. Now I can only go to recovery or download mode. I couldn't install my nandroid backup (don't know why, based on filename it seemed like an old one from a different phone, not the one I did today).
Trying to go back to stock following
http://forum.xda-developers.com/show....php?t=1274337
but I'm on a MAC, and can't figure out how to heimdall a ROM. I can flash a kernel using heimdall, but don't know the commands and flashing order for the stockEG30.tar in terminal using heimdall. I also downloaded the frontend suites for heimdall, but can't figure out where to place stockeg30.tar files.
Any help? I have no windows machines.
in order to install starburst v1.9.5 you must have v1.9 installed first (recommended w/ flashing zedomax kernal or lost kernal in CWM after reboot), make sure phone is rooted properly and CWM is installed if not already (can be done via download mode w/ odin)
download v1.9 here:
http://dev-host.org/z1jsf3k9lh44/stable_epic_starburst_10.27.11_v1.9_.zip
to get this on your sdcard you will have to mount through usb on cwm via mounts and storage and connect to your pc
follow rom flash instructions as usual in cwm:
format system through mounts and storage
wipe data
wipe cache
wipe dalvik through advanced
install zip from sdcard
reboot
wait a few minutes booted
then set up your phone
next flash/install either zedomax kernal or LOSt kernal via CWM
forums and downloads found here:
http://forum.xda-developers.com/forumdisplay.php?f=1284
wipe cache and dalvik before for flashing through cwm
reboot
next download v1.9.5 here:
http://forum.xda-developers.com/showthread.php?t=1276320
make sure it is saved to the root of your sdcard from which you want to install
next all you have to do is flash v1.9.5 over v1.9
do not format system
do not wipe data
do not wipe cache
do not wipe dalvik
install from sdcard
reboot
video to flash v1.9.5 found here found here:
http://www.youtube.com/watch?v=G7bC9qXqpg4&feature=youtu.be
i wiped everything and installed RunnyDroid V2 it said installed completed and now it shows htc screen then goes back into recovery. What should i do or what am i doing wrong?
try and re-download the rom, maybe you were unlucky and have a bad file, do other roms flash ok since that problem?
is there another link to download that you know maybe i can download from some where else
http://forum.xda-developers.com/showthread.php?t=1374838
there are both the original link and mirror link, but just to make sure, do any other roms work ok?
---------- Post added at 02:58 AM ---------- Previous post was at 02:50 AM ----------
also did you wipe dalvik cache from advanced option in recovery?
yea mexdroid miui cyanogen virtuous i have tried them all this is the only one that has done this
im downloading this rom myself now, i will let you know if it works fine for me..
i ill will use another rom this rom look like it has potential
sorry to say, but this rom installed just fine for me...
u put it on your sd n install through recovery correct
yes copied to sdcard, reboot to recovery, full wipe, dalvik wipe, choose rom from sd-card to install.... done (was snappy at lockscreen and homescreen but a bit laggy on app draw)
You need the Desire Z HBOOT for all Sense 3 > roms.
Sent from my HTC Vision using XDA App
ah ha! guess i had done that long time ago and forgotten, was a bit puzzled but then it was silly o'clock in the morning...
I tried a search but didn't find much of any relevance to my Arc's problem.
My Arc was getting quite laggy so I decided to wipe and put a custom ROM on. I rooted, then unlocked the bootloader and managed to put on CWM using DoomLord's kernel. Everything fine up until here.
Then, mistakenly, I tried to put stable CM7 on without updating the stock ROM. I was still on 3.0 (2.3.3) something. Well, after that it got stuck in a boot loop with the SE and CM7 logos just coming up and restarting.
I then tried the Flashtool with a stock uptodate 4.0 something firmware. It flashed successfully, but it still was stuck in the loop, albeit now without the CM7 logo. I then tried the FTA unbricking tool for repairing the trim area but it still stayed in the boot loop.
What else can I do? Maybe there is a driver problem and that is why even after using Flashtool it still doesn't boot?
I would be very grateful if someone could help me on this.
You have to flash FXP's kernel and not DooMKernel.
But I also tried to flash a stock rom and that didn't work also.
EDIT: I flashed stock ROM again, still didn't boot. Installed DoomLord kernel and then arconium and it still doesn't boot.
EDIT 2: In CWM Recovery if I try to wipe data, it says this:
"E:format_volume: no MTD partition "userdata"
Has anyone got a fix for this?
It would be much appreciated.
can you charge your phone now?
Yep, I can charge the phone.
it means your kernel is still working....
then have it fully charged, then try to flashing again.
some tips:
1. always have latest flashtools
2. always have your phone fully charged b4 flashing.
3. proceed flashing carefully. if u miss one thing, then trouble come.
4. have cache and dalvik cache cleaned after flashing a kernel or Rom.
good luck mate...
gogo415 said:
it means your kernel is still working....
then have it fully charged, then try to flashing again.
some tips:
1. always have latest flashtools
2. always have your phone fully charged b4 flashing.
3. proceed flashing carefully. if u miss one thing, then trouble come.
4. have cache and dalvik cache cleaned after flashing a kernel or Rom.
good luck mate...
Click to expand...
Click to collapse
No luck with previous firmwares so I'll try to flash the latest .62 stock ROM and then see.
I'll let you know how I get on. Thanks!
Well lads, I managed to get it working by flashing the LT18i firmware (4.0.2.A.0.42_CE). Now I just need to go back to the drawing board and try to get CM7 on there.
Thanks for all the help! I'll update this thread with any experiences.
I've managed to do it. Installed latest .62 firmware, flashed CM7 kernel, flashed 7.2 ROM and then GAPPS.
I don't know why it took me two days to bring the phone back from the dead.
ZAnwar said:
I've managed to do it. Installed latest .62 firmware, flashed CM7 kernel, flashed 7.2 ROM and then GAPPS.
I don't know why it took me two days to bring the phone back from the dead.
Click to expand...
Click to collapse
hi, i came up with the same question:
E:format_volume: no MTD partition "userdata"
and my device is moto xt502
could you be so kind to give some details how you fix it
thank you very much
I am having the same problem too..please help! i flashed cm7 kernel n followed the instructions very carefully
ilamaan said:
I am having the same problem too..please help! i flashed cm7 kernel n followed the instructions very carefully
Click to expand...
Click to collapse
I followed the instructions too, though they are not so much noob-friendly (and neither are the people on the forums, it seems...). FXP is not responding (actually, they rarely respond to anything, they usually just post when new release is out), other people either don't know how to fix it, because they haven't experienced such issues, or they are just hostile because you're "a an annoying noob". Anyway... first time after trying to flash 64 baseband on 107 or 106 release, I got stuck on logo, then flashed back to .42 and it worked. Now, while updating to 108, I tried to flash the 64 libraries and patch, but it didn't work. Got back to .42, but this time nothing happened. Still stuck on logo. And when I try to restore data, it says:
E:format_volume: no MTD partition "userdata"
Error while formatting /data!
I think I'll go back to stock... love CM, but hate the poor/no help of the developers...
try these
flash new firmware using flashtool.
after flash.turn on your device.
enable uknown source n usb debug
then turn off your fon
flash baseband 64
then turn on your fon
put fxp108 updated-kang,gaps,baseband 64 libs on your memory card,
then turn off your fon
flash fxp kernel fastboot flash boot boot.img
after flash turn on your fon..go to recovery
formated factory reset,wipe cache,clear dalvik cache,wipe betry stats..
flash update cm7.update.zip,gaps.zip,baseband64libs.zip
reboot your fon..wait 2 or 3 mint..done
My thanks goes to you. I was hoping to avoid full wipe, but I don't care anymore, since I brought my phone back to life. I skipped these steps, though:
beranchoi said:
flash baseband 64
flash baseband64libs.zip
Click to expand...
Click to collapse
...because I went to check which baseband my phone was after flashing Global .62, and it said I was on -64, so it was no more necessary. For all of you having trouble with booting, follow the instructions given.
And now back to restoring all those apps
hey guys, can you post the link to that stock firmware, baseband and libs? maybe I've downloaded something wrong :/
btw. is there still that bug with a dark screen after locking phone?
lemon66 said:
hey guys, can you post the link to that stock firmware, baseband and libs? maybe I've downloaded something wrong :/
btw. is there still that bug with a dark screen after locking phone?
Click to expand...
Click to collapse
This is the link to the stock 4.0.2.A.0.42.. flash it using flashtool.. http://www.multiupload.com/W3B7BOKUXQ
Everything you need for flashing FXP is on his signature, including bb .64 (to be flashed with flashtool - doesn't erase a thing).. then download FXP (latest is 108) and inside the zip file you'll see boot.img, which contains the special kernel (to be flashed using fastboot, not flashtool).
Also there's no dark screen bug in the latest releases, certainly not in FXP 107 and 108, which I'm using now.
Please help!
beranchoi said:
try these
flash new firmware using flashtool.
after flash.turn on your device.
enable uknown source n usb debug
then turn off your fon
flash baseband 64
then turn on your fon
put fxp108 updated-kang,gaps,baseband 64 libs on your memory card,
then turn off your fon
flash fxp kernel fastboot flash boot boot.img
after flash turn on your fon..go to recovery
formated factory reset,wipe cache,clear dalvik cache,wipe betry stats..
flash update cm7.update.zip,gaps.zip,baseband64libs.zip
reboot your fon..wait 2 or 3 mint..done
Click to expand...
Click to collapse
Hey, this is my first post on here. I am new to android and just got an arc a few days ago. Even before i got it i was trying to figure out how to mod it. I am reasonably good at computers but a lot of the stuff i read on these forums is beyond me.
I have done my best to root and install CM7 on my arc but i have failed yet again.
I finally got it rooted and was all happy until when i tried to install CM7, all i can get to is the boot screen, but although the little android on the skateboard is very cool, i wish i could get it going!
So because I dont really understand the list of instructions you posted in this quote, i was hoping you could kind of translate into noob-speak. I still dont feel like i completely understand 'flashing'. In your instructions you say to "flash baseband 64" and that is the main point where I am stuck i think. Do you use a certain program (flashtool?) for this? or do it through a terminal window on the PC.
Also links to all the files mentioned would be awesome, its hard to find proper links with multiupload down and that kind of thing. Also with the rate this kind of tech evolves, things get outdated to quickly.
Please help! At the moment i have (i think) successfully returned my arc to the stock firmware using flashtool. Although i did this twice because i re-tried flashing CM7 and failed again. And the second time i couldnt seem to select LTI5i as the device to flash too, but LTI8i is what i used and it appears to have worked. So any help with that little conundrum would also be appreciated!
Cheers for any help given, I am so desperate to get this mod going as i have spent a solid 10+ hours trying already.
your bootloader unlock?right?
which kernel u use right now?
@tehknowitallnoob, I can lead you through the whole flashing process, if you want to, but only on Friday after around 9 pm GMT +1, since I don't have the time to do it earlier.
Sent from my LT15i (Xperia arc) on CM7
Try this:
Reflash back to stock ROM with a flashtool.
Then again flash the cm7 or try cm9
-cheers
Hellooooo XDA peeps
So I upgraded my HTC desire HD to magnificent 4.2.2 via : Codefire X jellybean (cfx_ace-4.2.2-SR13)
everything else works fine except WIFI :crying:
I have tried rebooting it couple of times, It just wont come up
Any one able to help please ??
Full wipe (system, data, cache)? And try opening the zip in a file manager; is it readable?
bananagranola said:
Full wipe (system, data, cache)? And try opening the zip in a file manager; is it readable?
Click to expand...
Click to collapse
I too have this problem..
I've tried a number of solutions, as it doesn't seem to be isolated to the HTC Desire HD..
Tried all the solutions outlined in the following thread, - not for Desire HD but it's the same problem..
http://forum.xda-developers.com/showthread.php?t=1995690&page=1
It basically involves, wipe, re-wipe, re-rom, back to stock, reload, wipe, tried WiFix, tried pretty much everything.. nothing to succeed so far..
I had similar issues using Blackout ICS ROM but they were more intermittent..
suggestions?
joshuasan said:
I too have this problem..
I've tried a number of solutions, as it doesn't seem to be isolated to the HTC Desire HD..
Tried all the solutions outlined in the following thread, - not for Desire HD but it's the same problem..
http://forum.xda-developers.com/showthread.php?t=1995690&page=1
It basically involves, wipe, re-wipe, re-rom, back to stock, reload, wipe, tried WiFix, tried pretty much everything.. nothing to succeed so far..
I had similar issues using Blackout ICS ROM but they were more intermittent..
suggestions?
Click to expand...
Click to collapse
I have tried wiping every thing and flashing the ROM again ,, still WiFi doesnt work
Turns out this isnt only a HTC desire Issue , other phones are having issue with wifi as well with custom jellybean ROM
As mentioned by Josh have tried the above steps as well,
Also tried to play around with ES file explorer , wiFix etc.. wiping cache and davlink etc.. no luck
@bananagranola , Yes Zip file is readable in file manager
Hi guys,
did you resolve this issue somehow ? I have absolutely same problem, I can not turn the wifi on. It's still just trying turn it on and after few minutes I just got "Error" message. I already tried various ROMs, radios, full wipe, but nothing helped.
I don't have issue with wifi.
Recomended read carefull this post http://forum.xda-developers.com/showpost.php?p=34387076&postcount=3
Recomended flash stock rooted rom then flash codefireX build
Recomended full wipe
Hope help
Same issue
Hi,
I've got the same issue. I've rooted the bootloader the "official" way, by following the HTC guidlines. The only way to get WIFI to work again is to go back to SR2, then it works.
Is there any way we can track down the issue? I'd really love to use the latest version
Cheers,
Ingo
nightstorm8x said:
I don't have issue with wifi.
Recomended read carefull this post http://forum.xda-developers.com/showpost.php?p=34387076&postcount=3
Recomended flash stock rooted rom then flash codefireX build
Recomended full wipe
Hope help
Click to expand...
Click to collapse
Hi guys,
I have the same issue with wifi not working with SR15.
I follow the steps as mentioned in the 3# post at the developers forum,
that is full wipe SR12 and then wipe cache, wipe dalvik cache and install SR15
but unfortunately wifi does not work.
I had also the same problem with wifi not working with SR13 and SR14.
Does anybody can help to resolve this annoying problem?
Thanks!
resolved with SR15
santziak said:
Hi guys,
I have the same issue with wifi not working with SR15.
I follow the steps as mentioned in the 3# post at the developers forum,
that is full wipe SR12 and then wipe cache, wipe dalvik cache and install SR15
but unfortunately wifi does not work.
I had also the same problem with wifi not working with SR13 and SR14.
Does anybody can help to resolve this annoying problem?
Thanks!
Click to expand...
Click to collapse
Downloaded and installed cfx_ace-4.2.2-SR15
From : http://forum.xda-developers.com/showthread.php?t=2003273
Wifi working now
Happy happy :victory::victory::victory:
What did you do
Nazzyboy said:
Downloaded and installed cfx_ace-4.2.2-SR15
From : http://forum.xda-developers.com/showthread.php?t=2003273
Wifi working now
Happy happy :victory::victory::victory:
Click to expand...
Click to collapse
Hi Nazzyboy,
what did you do to make it work? I gave it a try and nothing changed. What I did was (Starting point SR2):
1) Factory Reset
2) Wipe dalvik
3) Wipe Battery
4) Wipe System
5) Installed SR15
6) Installed GAPPS
Any tips?
Cheers
Sandiaz said:
Hi Nazzyboy,
what did you do to make it work? I gave it a try and nothing changed. What I did was (Starting point SR2):
1) Factory Reset
2) Wipe dalvik
3) Wipe Battery
4) Wipe System
5) Installed SR15
6) Installed GAPPS
Any tips?
Cheers
Click to expand...
Click to collapse
Use 4ext recovery
Wipe everything except SD card
Flash sr12
Boot and configure time and verify auto rotation and WiFi working
Reboot into recovery
Flash sr15
Boot
Verify that you still have auto rotation and WiFi
Reboot into recovery and flash Gasps.
Reboot
Now you should have everything working.
Sent from my Inspire 4G using xda premium
lordpipa said:
Use 4ext recovery
Wipe everything except SD card
Flash sr12
Boot and configure time and verify auto rotation and WiFi working
Reboot into recovery
Flash sr15
Boot
Verify that you still have auto rotation and WiFi
Reboot into recovery and flash Gasps.
Reboot
Now you should have everything working.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Hi lordpipa,
I am using ClockworkMod to do the setup and to perform flashing. Tried to follow your guide...
My problem is that in SR12 WiFi is not working either so I'm kind of stuck with SR2.
Is there any possibllity to shed some light into this? Can I get an error log, to get an idea what is going wrong when I try to switch on WiFi?
Cheers
Ingo
Sandiaz said:
Hi lordpipa,
I am using ClockworkMod to do the setup and to perform flashing. Tried to follow your guide...
My problem is that in SR12 WiFi is not working either so I'm kind of stuck with SR2.
Is there any possibllity to shed some light into this? Can I get an error log, to get an idea what is going wrong when I try to switch on WiFi?
Cheers
Ingo
Click to expand...
Click to collapse
Right now I'm on sr15 dirty flashed from sr12 and I have WiFi working and even hotspot tethering. To my understanding WiFi broke on sr13.
Sent from my Inspire 4G using xda premium
---------- Post added at 01:38 PM ---------- Previous post was at 01:37 PM ----------
Did you flash 4ext.
Sent from my Inspire 4G using xda premium
Sandiaz said:
Hi Nazzyboy,
what did you do to make it work? I gave it a try and nothing changed. What I did was (Starting point SR2):
1) Factory Reset
2) Wipe dalvik
3) Wipe Battery
4) Wipe System
5) Installed SR15
6) Installed GAPPS
Any tips?
Cheers
Click to expand...
Click to collapse
I used adp_fastboot :: http://forum.xda-developers.com/showpost.php?p=31211732&postcount=396
do a wipe before installing . Good luck:good:
desire HD users this is awesome : ace_PAC_JB_4.2.2-v21.0.1_20130317-080548
its Pacman version : Paranoid + AKOP + Cyanogen and it is awesome
Everything I have used works so far including wifi
I used adp_fastboot to install
I got this ROM in a USB from a friend so sorry dont have link for it but its easily available on XDA I have heard
Gluck..
Still no luck, WIFI is not working...
Nazzyboy said:
desire HD users this is awesome : ace_PAC_JB_4.2.2-v21.0.1_20130317-080548
its Pacman version : Paranoid + AKOP + Cyanogen and it is awesome
Everything I have used works so far including wifi
I used adp_fastboot to install
I got this ROM in a USB from a friend so sorry dont have link for it but its easily available on XDA I have heard
Gluck..
Click to expand...
Click to collapse
Working
Sandiaz said:
Still no luck, WIFI is not working...
Click to expand...
Click to collapse
Thanks to everyone, I've finally managed to get it working. As Nazzyboy suggested using adb to install the boot.img has done the trick!
Great,
Ingo
Wifi / Settings FC
Ok, so I'm fairly new at this. I was on CodefireX (4.2.1) and everything seemed fine until then. Off late the Rom has been crashing a lot, and i decided to go for a new update. So far I've tried PACman v23 and JellyBeer.
And in these both, although everything seems fine, Im havin issues with Wifi, its on a perpetual "seaching for Wifi network" mode! I've also updated to the latest radio, but no luck as such. The problem still persists.
I had rooted my phone using AAHK is that makes any difference. :S
S-On or S-Off
Hi,
how is your S-On state? My problem was due to the fact that my phone is in S-On, therefore I had to follow a different approch to install an image.
Cheers
Ingo