camera was working with my stock rom, but i wasnt satisfied with that so i flashed the hardspl 1.40olinex , radio 1.00.25.05, n energy rom titanium.... everythin was working fine but one day the camera started to problem, sometimes i was getting the unable to initialize camera or sometimes it just stucked on black screen showing nothing.... hardreseting worked for me couple of times but still getting the same after couple of days, i flashed another radio 1.09.25.23, it worked and then the same.... flashed another rom n it worked for 2 or 3 times n then the same error.... now recently i flashed the official htc 2.03 rom it worked for me for about 3 days but today it stucked showng nothing.... changed the hardspl to 1.93 worked just once or twice n again nothing......
i dont know what might be the problem.....
Finally after so many flashing came up with success.... camera is working and i have tested it by resetting couple of times. took the battery out for about 15mins placed back in and still the camera is workin..... i have seen many people are going through the same problem.... This is what iam currently running:
1) Hardspl 1.93olinex unsigned
2) Radio 1.00.25.05
3) Rom Freya's Simple Titainium WM6.5.x
Related
Worked ok last night, then it crashed (mad colours on screen), so I had to do a FULL restore of radio and rom (seemed to be stuck in bootloader).
So, reinstalled everything, all good, I just cannot get it to turn on WIFI. I go into comm manager, click on wifi, and it tries to turn it on, then comes back with a X next to the icon.
Also the front today screen plugin (the wifi/bluetooth one) doesnt say WIFI: off anymore. Just has Bluetooth:Off
Any ideas
THANKS!
Try to flash back the rom again..
By the way, what rom do u used?..
I only just flashed it again ..
I used the O2 rom 'Xda_Exec_Upgrade_v1.30.162'
Can you recommend another ROM that might fix it?
Also, does reinstalling a ROM reinstall all the drivers? As I've noticed some things stay resident even after a flash; call timers for one..
thanks
while im waiting for replies, im going through roms
trying different AKU ones now from the ftp
could it be a radio issue?
My QTEQ 9000 are on the same situation, made some stripes on the screen and now can´t detect anything!!
The wifi apears I start it but can´t get any signals!!
Any help please?????
i upgraded radio to 1.14 and still same
Try these ROMs
You can find on the forum, Ivan's and Helmi's ROMs.
They are the latest AKU 3.2 and seems to work just fine as O2 ROMs are just AKU 2.X!
I think the problem lies deeper than a hard reset/rom as well, it must do after installing 3-4 roms, and a couple of radios.
Yes ive tried UNI_AKU3_5_WWE_IVAN_Test2 ROM as well.
Same.
Anyone else got any solutions as to what it might be?
installing the latest qtek rom off buzzdev now, includes full radio/rom/ext rom. if this doesnt work, then f**k it, ive spent enough hours on it, and i'll just get a new one on contract tomorrow.
thanks for the people that replied
what about the driver disk, isnt there a wifi thing on there
maybe im dreaming
Have a look in the network adapters list and see if the Tiacxwln card is listed, if not sounds like it is a hardware rather than a driver problem. It's not unheard of for computer hardware to fail for apparently no reason. This is likely if you have tried different ROMs and none of them work.
I´ve tried upgrade radio to 1.14 and I tried Ivan's and Helmi's ROMs.
and the problem persists!!!
Tiacxwln card is listed.
Strange situation because during one year worked very well and suddenly make some stripes on the screen and now don´t detect nothing!!
Maybe antenna problem??
Help us??
Is there a problem with o2 official rom?.. Heard few people also got a problem if flashing to o2 rom..
Nope, not working, tried qtek roms, a new orange rom, still wifi not coming on.
Yes the card does show in network cards.
Oh well
Any help Please???????????????????????????????
hi there.
this is my first post, and unfortunately, it is asking for help..
i recently bought a artemis, and the last couple days i've been searching on roms, both cooking and flashing.
i've tested a couple roms, from vanilla to touch, b&b and others, every single one without a problem. for all of them i've user XP sp2 in a virtual machine (VMWare). everything went ok, cid unlocking and flashing the roms perfectly, and as i finally decided to cook my own rom, i started looking for generic roms from htc, to see what they looked like, so i could had a better understanding on how to cook a good rom to settle my needs.
unfortunately, i flashed a rom, don't now for sure wich, but it's from o2, and from that moment on, i could not flash anymore.
every time i try to run the uspl, i can't get the spl to 1.11.000. it stays on 3.07.000.
i've tried running several times in a row the uspl, then flashing, tried flashing a generic rom, hardspl, arte and uspl, tried running the .nbh from the sd with no success (although there seems to be a fix for that, will try that tomorrow), tried getting into boot and flashing.
but the funny thing is, in the uspl, when it is running, and reaches 70% it jumps to 100%.
and whenever i try to flash it, obviously, i get the error 270 update error.
so, after that, any ideas? the artemis is running smoothly, without a problem, although not with its original rom, and locked to a different provider (it's cid locked to vodafone portugal)
thanks in advance
edit: i've had the chance to test the sd flashind, again, with no result
no ideas anyone?
nevermind, managed to get over it.
used an upgrade from the htc in the language my pda is locked. solve it
I have the same problem. I am working with it !
Hi,
Few day ago my artemis p3300 got crazy.
it's make random reset, sometimes isn't boot up after reset, it stuck on black screen. or it's coming up and then reset again.
it's also stuck few times on vibration mode. and it's only stop with soft reset.
suddenly I can't turn on WIFI , it's always stay off .
I Try this roms in the last 2 days :
manila 2D pdviet 33 - 36
b&b v 5.0
last I returned to touch 4.02 and I still have no wifi and it's stuck.
I also try to change the radio firmware...
should I throw it ? there is something to do ?
try
1-flash wm5 ship ROM
2-CID Unlock
2-Flash your favourite ROM
U should be OK
i tried to install the original HTC ROM but i still get error #24 - "invalid device id" or something similar. at the moment i can get the tri-color screen by pressing the voice button and soft reset and that's it. when i try to soft reset normally i get a blank screen. plz help?
TIA
finally it's back...
thanks.
I found other Original ROM . I installed it and it work fine.
Then , I installed Manila 2D again and now after I change my Radio Ver, My gps and GSM are working good.
the last thing that no working is WIFI. i can't turn it on!
how do I know what radio version are fix for my device ?
thanks
royis said:
thanks.
I found other Original ROM . I installed it and it work fine.
Then , I installed Manila 2D again and now after I change my Radio Ver, My gps and GSM are working good.
the last thing that no working is WIFI. i can't turn it on!
how do I know what radio version are fix for my device ?
thanks
Click to expand...
Click to collapse
You may also want to try buying a new battery if your device is old. I've seen Wizards act wierd when the batteries go bad. But they usually get swollen - battery pushes out the battery cover.
Also, have you opened your device lately? I had a problem with my reception after I changed my housing. There are small connectors that have to be bent out to touch their corrasponding spots on the circuit board for FM Radio, GPS, Wifi, ect. Have to make sure they touch the right spot.
And of course, it could just be a bad flash. Reflash and try different radios. That's all I can think of.
my wifi is not working too. After manila 2D, and i try old rom, new roms, the newest radio but not working.
dear friends
I am facing a strange problem on my diamond.
After flashing any ROM (whichever it may be) the loading of cabs etc takes place successfully.
But, after few minutes/hours the contents of strat/program are gone. and no program functions. I have flashed re-flashed and reflashed. cannot get over this strange proble.
Can any body guide me what wrong is happening with my diamond???
PS: I have hard SPL 1.40 olinex on my device.
Problem Solved -->http://forum.xda-developers.com/showpost.php?p=3433851&postcount=22 (Thanks cmonex)
c_shekhar:
I have a similar problem. I have had no issues flashing in the past and am very familiar with the procedure. The other day however I noticed a problem where by some of my apps would "disappear".. odd. Also after some time my phone would hard reset instead of soft reset, at first I put this down the ROM as I have had this before with udk's ROMs (no disrespect intended!) and had tried his topaz ROM. It seems to have got to the point now that once a few hours have passed my phone will lock up and then when I reset, it just hangs at the "touch Diamond" screen and I have to hard reset.
I have tried reflashing Radio, Hard SPL, OS.. I have also tried installing my apps one by one and soft reseting after each install. just whenI think it is working it will freeze again.
I have tried flashing different HARD SPL's but it always completes but when I go into boot loader it still says OLINEX 1.40.
What was the last ROM you flashed before you started noticing the issue? The last two I tried where udk syrius topaz and DIB 1.33.
I wandered if it was something to do with the data on my internal storage???
Going to try a hard reset and format movinand next to see what that does.
P.S: yours was the last ROM I used for my Polaris, it was awesome!!
I tried uDK's topaz based latest ROM and after that it started givind problem.
many a times when I prick for soft reset it hard resets the device. I have hard resetted my device several times but it does not set the problem right.Huhhh
Thanks for liking my Polaris ROM..
any headway found by you pl share.....I had borrowed somebody's Diamond and it is F*##ed up.
Same problem here
I have the same problem.
Started with morna 1.8 and then vic 3.5 and then windows net 6.5.
Seems like it keeps doing it. I just flashed a complete standard stock rom from htc from my internal storage instead of via active sync which had radio os etc all included. i then did nand reformat and copied all my data back. its almost like it forgets the apps that was installed. I also tried redoing olipro 1.4. Its running now on the stock rom from this morning. I did reset about 15 times and its still "sticking". Ill update you guys to see if anything changes.
Very very odd.
I know its not rom related and not a flashing problem - unless i flashed the diamond too many times. Ive been flashing from the good old Imate days, Kaiser, Kaiser 2 etc. So Im NOT doing anything wrong...
I new I wouldn't be the only one!!
I have just hard reset and formatted movinand AND re-downloaded all my apps so for now nothing will be going back on my internal storage that was on before.
I'll post any updates.
I have the same problem with the Morna. Flashed, reflashed, soft & hard reset.. nothing solved. Every about 24hour the TF3D won't start, the SMS&Emails folders are empty, no contacts and on desktop an error on file BOOT.MSC (can't find associated program to open that)...
After 3 days, I have flashed the Touch with the TIR11 and no one problem. I don't know if the problem is of the rom or else...
Sounds like a virus...
never encounter this problem,but some of my friends does.neither do I know why
offtopic: Are you working on a Diamond rom? I really loved (in fact I'm still using it) your 1.60.21014bCS on my polaris... I think it will be permanent... Have you thinked of making a M2D rom for Diamond ?
I had this problem if i cooked a bloated rom on my Artemis, it was easly solved by flashing an untuched stock rom directly from the operator and then flashing a custom rom again and then no problems untill i next flashed a bloated rom, i think that if the rom is too big it fills the area designed for the rom the starts to overright the hpl/spl or radio then the phone starts to crash and loose programs.
so get your opperators rom, flash, flash stock SPL, then flash h/SPL to re-unlock so you can try another custom rom
don't forget to use the H/SPL custom ruu-flasher to flash stock spl or it won't flash (its overright protected)
garymeg said:
I had this problem if i cooked a bloated rom on my Artemis, it was easly solved by flashing an untuched stock rom directly from the operator and then flashing a custom rom again and then no problems untill i next flashed a bloated rom, i think that if the rom is too big it fills the area designed for the rom the starts to overright the hpl/spl or radio then the phone starts to crash and loose programs.
so get your opperators rom, flash, flash stock SPL, then flash h/SPL to re-unlock so you can try another custom rom
don't forget to use the H/SPL custom ruu-flasher to flash stock spl or it won't flash (its overright protected)
Click to expand...
Click to collapse
Thanks for the info, i'll give that a go. Makes sense. Will have to wait till tomorrow so i'll have to put up with a crippled phone till then!!
I posted about this issue a couple of days ago,I had all the symptoms described.
After using the clear storage option on my diamond,clearing the phone and internal storage then flashing a new rom,the problem seems to be resolved.
I also experienced similar issues yesterday and for the first time ever, during the use of a udK rom.
Update
Grumps said:
I have the same problem.
Started with morna 1.8 and then vic 3.5 and then windows net 6.5.
Seems like it keeps doing it. I just flashed a complete standard stock rom from htc from my internal storage instead of via active sync which had radio os etc all included. i then did nand reformat and copied all my data back. its almost like it forgets the apps that was installed. I also tried redoing olipro 1.4. Its running now on the stock rom from this morning. I did reset about 15 times and its still "sticking". Ill update you guys to see if anything changes.
Very very odd.
I know its not rom related and not a flashing problem - unless i flashed the diamond too many times. Ive been flashing from the good old Imate days, Kaiser, Kaiser 2 etc. So Im NOT doing anything wrong...
Click to expand...
Click to collapse
Update : ITs 17 hours later and still going fine. So maybe the reflashing of the stock rom resolved it. I must say the stock rom i flashed is huge. its over 110Mb so maybe it cleaned out all the jazz. Or maybe when i reformatted the NAND it resolved the problem. I dont know. I also did a softreset about 50 times during the night removing the battery every now and then and its still ok. Ill Update again as soon as something Happens
same problem here...flashed tons of rom before...never had problems...upgraded from monrna 1.7.1 to 1.8 and the problems started..no programs...reset and install procedure restart...i've solved downgrading radio to 1.09.25.23 and flashing 2.03 original italian rom...but now i want to try to re-flash morna 1.8...i'm so curious...u know?!
Im Going to
sakara said:
same problem here...flashed tons of rom before...never had problems...upgraded from monrna 1.7.1 to 1.8 and the problems started..no programs...reset and install procedure restart...i've solved downgrading radio to 1.09.25.23 and flashing 2.03 original italian rom...but now i want to try to re-flash morna 1.8...i'm so curious...u know?!
Click to expand...
Click to collapse
Ill try another rom tonite probably morn 1.8 or wm 6.5 beta 3. and see what happens
i flashed to a HK 2.03 rom and try udk's again, so far so good, will report back any issue
I got exactly the same after the huge 6.5 beta
Clear storage was enough to get rid of it for me (no need for the internal format or the std ROM)
Thanks
goRt said:
I got exactly the same after the huge 6.5 beta
Clear storage was enough to get rid of it for me (no need for the internal format or the std ROM)
Thanks
Click to expand...
Click to collapse
Simply running clear Storage didnot solve my pro...
superpc said:
i flashed to a HK 2.03 rom and try udk's again, so far so good, will report back any issue
Click to expand...
Click to collapse
Can you kindly write more details?
Is HK 2.03 stock ROM?
Which hardSPL did you have on your device before flashing the HK 2.03?
etc...
Stability Restored
Got mine stable again by following post #10.
Flashed stock 1.93 rom then flashed stock 1.93 spl.
Now back with oli 1.93 hspl and pda corners v3 rom.
I have my diamond for about a year now. It has HSPL 1.40 Olinex and 1.17 radio . I've flashed several custom ROM's with no problems. I settled on GENY Rom's (works the best for my needs) . After 3-4 months my ROM was in need of a new fresh flash (system became laggy but no big errors) .
So i tried a couple of MEMI ROMS but they didn't quite cut for me. I wanted to install my "stable" GENY ROM when things got wild. I get different errors on boot ( a window appears on the screen different errors all the time > failed to initialize etc. ) My phone freezes and won't boot ( i have to reinstall the ROM).
I tried reinstalling the Bootloader again , the Radio, and the Rom (according to MTTY) . Same thing... phone freezes in different normal tasks> won't boot . If i shutdown the next day it's back from square 1 ( Align screen .. no apps no settings).
So what should i do ?
Download original diamond rom from Htc site and then flash it from original rom.............i think it'll solve your problem..............