hi to all
i have a bricked s8500 wave and please help me to flash it
my phone is dead
it can go to download mode and i try many times to flash it with a lot of frimwars with multiloader 5.65 and with three computer but no result
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
my problem is : all the file flash Successful but multiloader can not flash apps_compressed.bin file
please help
WTF?!
in your screenshot i can see files taken from different FWs!!!!!!!!!
Bootfiles from XPKH3
Apps_compressed.bin from JPJKB1!!!(What is that FW!!!!)
Rest of files from XXJL2
Are you joking or what?
Please flash a FULL FW FILES FROM THE SAME FW
Best Regards
mylove90 said:
WTF?!
in your screenshot i can see files taken from different FWs!!!!!!!!!
Bootfiles from XPKH3
Apps_compressed.bin from JPJKB1!!!(What is that FW!!!!)
Rest of files from XXJL2
Are you joking or what?
Please flash a FULL FW FILES FROM THE SAME FW
Best Regards
Click to expand...
Click to collapse
no no no
first time i Full FW FILES FROM THE SAME FW and no result
this screen shot show i try all the ways with all the files from each frimware
sorry sorry my english is very bad
new screenshot for you
now on the download mode display write
abnormal sw detected !
upgrade only !
hmmmmmmmmmmmm
This issue is so strange
try to flash full 1.2 FW and make sure that your phone is Fully charged before starting that flash
you may face a problem that the phone won't display a battery indicator if that happened leave your phone about an hour on the charger then try flashing it
P.S : if your phone still can go to download mode then it is Semi-bricked not bricked
Please DONOT PANIC there is a solution for this
Best Regards
Thanks for replys
i flashed my dead phone with a bada 1.2 full frimware
and when i press download key in multiloader it say Error : Dbl Write [0.2s]
and now on my display phone in download mode write :
abnormal sw Detected !
upgrade only !
=====================
i downlad and test many frimwares ( bada 1.0 and bada 2.0 )
flash start only with S8500XPKH3 frimware
but with this frimware it can not flash apps_compressed.bin file and after restart my phone stay on samsung logo
Please DONOT PANIC there is a solution for this
Click to expand...
Click to collapse
how ? please write for me . i am really sad for my dead phone
dude i think you have no idea how to flash ur phone...........best you take it to service centre before you do more damage and nothing comes on the screen. my sincere advice!
sajjji said:
how ? please write for me . i am really sad for my dead phone
Click to expand...
Click to collapse
Have you tried with different Multiloader version? For 1.2 I used 5.62, I think...
yes
with different multiloader after i click on the port search . download mode is disable
only with multiloader 5.65 i can click on download after click port search
Hey look the Dbl error is due to the usb driver
Flash the bootloader of 1.2 alone and it will say Dbl error no worry then install kies Drive by going to C:\Program Files (x86)\Samsung\Kies\USB Driver and install it from there
Now try to flash the bootloader and the DBL ERROR Should be gone
After changing the bootloader from 2.0 to 1.2 flash the rest of 1.2 FW files
I hope you can do this alone
If this is too hard for you PM me and i'll chat with you to do step by step
Best Regards
Try on other PC.
Obviously, this problem has got to do with missing drivers.
Try to reinstall all necessary drivers and use the correct full firmware to flash.
Flash first with a working full bada 1.2 firmware. When all is ok, then you can try to flash the bada 2.0 firmware. And note, it's never advisable to mix firmwares randomly.
For more ref, please read this as well.
hi dud first download this fm delete the spaces from the link
hotfile . com/dl/118887798/b7adf6b/S8500JPKE1.rar . html
then download thil multiloader version
letitbit. net /download/52353.557da31e094070e195a55fca02b0/multiloaderv5.64.rar . html
now you have too charge you re phone for 3 hours now put it in download mode
open multiloader select bootfiles and all other selections in spl mode in full download
don t select the fota file
connect you re phone to pc and make shur the usb is fine
now multiloader should detect you re phone automaticly the click another time on search the click download and
i wish i gived you my help because that was my problem too error data errase hhhh
nouninou said:
hi dud first download this fm delete the spaces from the link
hotfile . com/dl/118887798/b7adf6b/S8500JPKE1.rar . html
then download thil multiloader version
letitbit. net /download/52353.557da31e094070e195a55fca02b0/multiloaderv5.64.rar . html
now you have too charge you re phone for 3 hours now put it in download mode
open multiloader select bootfiles and all other selections in spl mode in full download
don t select the fota file
connect you re phone to pc and make shur the usb is fine
now multiloader should detect you re phone automaticly the click another time on search the click download and
i wish i gived you my help because that was my problem too error data errase hhhh
Click to expand...
Click to collapse
only multiloader 5.65 detect my phone
in multiloader 5.62 or 5.64 when i click on port search no happen and download key is disable
but in multiloader 5.65 when i click on the port search it show ready lismore
and i can choose download key
why multiloader 5.64 can not detect my phone while 5.65 detect my phone ?
thanks for your gold helps
mylove90 said:
Hey look the Dbl error is due to the usb driver
Flash the bootloader of 1.2 alone and it will say Dbl error no worry then install kies Drive by going to C:\Program Files (x86)\Samsung\Kies\USB Driver and install it from there
Now try to flash the bootloader and the DBL ERROR Should be gone
After changing the bootloader from 2.0 to 1.2 flash the rest of 1.2 FW files
I hope you can do this alone
If this is too hard for you PM me and i'll chat with you to do step by step
Best Regards
Click to expand...
Click to collapse
not work and i see DBL ERROR with all frimwares while i can flash my phone with S8500XPKH3 frimware !!!!
but the app file can not write on the phone and phone stay on samsung logo
i installed last driver 2 days ago
ssud_V2_9_5_0916_whqled.exe
nouninou said:
open multiloader select bootfiles and all other selections in spl mode in full download
Click to expand...
Click to collapse
your frimware in not a full frimware and have not bootfile . how i select boot file ?
you say select bootfiles but your frimware have not bootfiles folder
and all other selections in spl mode in full download
Click to expand...
Click to collapse
what is spl mode ?
next time get some more knowledge first
hi dude follow this videos & you can use multiloader last version
if it don t work with you take you re phone to a samsung profissional & he will flash you re phone don t get scared cause this problem happend to me
the videos
delete the space
youtube . com/watch?v=9XfMn89vOmo
youtube . com/watch?v=S8RX0bKKp1A
hey
hi lads.i m having the same DBL error thingy. it looks like some older versions of the loaders work better than the most recent one to me so i do agree with yourman there that it has to be something with the drivers. can somebody point me to the right drivers? the ones i have tried so far dont work. or just point me to the right folder inside the skies folder,there s about 20 different folders inside the skies usb drivers folder
cheers
hey
i fixed mine now
i used MultiLoaderX_v5.65.exe (google it) and S8500XPKH3 (bada 2.0)
after that i had no more problems flashing the phone
if it still goes in to download mode,u can save it!!!!
give it a go.....
and i have this problem, i tested this but : ERR : Dbl Erase
can u help me ?
Related
Sorry For Interupting.
I'm Having Problem With SHW-M410K Firmware.
It is not Full, but able to Part Flash.
However I had a problem
ERR : NAK_BAD_SEC_CODE 0
Error : Apps Write [0.2s]
Click to expand...
Click to collapse
I've Got Mr. Adfree's Reply
I can confirm M410K nor M410S apps_compressed.bin work in XXLD1 S8600 Firmware.
So again Question.
Boot changed??
Did you used Bootfiles from S8600 ?
Thanx.
Best Regards
Click to expand...
Click to collapse
I'm confused with reply. You mean that Wave 3 which has XXLD1 can assume SHW-M410K Firmware?
Hello.
We have same result.
NO sucess with flashing apps_compressed.bin from M410K or M410S.
Code:
Download Start Ch[0]
ERR : NAK_BAD_SEC_CODE 0
Error : Apps Write [0.2s]
Other user tested... same result:
http://www.handy-faq.de/forum/samsu...fragen_diskussion_firmware-7.html#post2288269
Die apps_compressed.bin lässt sich im übrigen bei beiden Firmwares nicht flashen.
Click to expand...
Click to collapse
Short translation:
NO apps_compressed working from M410S nor M410K
:crying:
Only reason for not working is M410K and M410S need Bootfiles.
So I think you have now Bootfiles from XXLD1 on your M410K ?
Is this correct ?
Best Regards
adfree said:
Hello.
We have same result.
NO sucess with flashing apps_compressed.bin from M410K or M410S.
Code:
Download Start Ch[0]
ERR : NAK_BAD_SEC_CODE 0
Error : Apps Write [0.2s]
Other user tested... same result:
http://www.handy-faq.de/forum/samsu...fragen_diskussion_firmware-7.html#post2288269
Short translation:
NO apps_compressed working from M410S nor M410K
:crying:
Only reason for not working is M410K and M410S need Bootfiles.
So I think you have now Bootfiles from XXLD1 on your M410K ?
Is this correct ?
Best Regards
Click to expand...
Click to collapse
Nope.
I've saw your posts(about XXLD1) carefully at yesterday.
So I was founding XXLD1 INCLUDING Bootfiles from yesterday.
However... I can't find firmware that including Bootfiles.
In Sam Mobile, I can't find Firmware INCLUDING Bootfiles, there are only excluding BootFiles
And, I'm unavailable to access Check Fus Downloader.
(Whether GUI, Non-GUI)
Can Help Me :crying:
(I'm tired of waiting HotFile 20 minutes. Uh)
/Current State
S8600XXKJC ->Turko CFW V2->S8600XXKJC(Currently Flashed)
/Current State
S8600XXKJC ->Turko CFW V2->S8600XXKJC(Currently Flashed)
Click to expand...
Click to collapse
XXKJC has folder BOOTFILES
Contain these files:
Code:
appsboot.mbn
dbl.bin
osbl.bin
partition.bin
We need these files for M410K and/or M410S...
Other ideas...
1.
Last 1024 Bytes from apps_compressed.bin...
Decrypt
replace last 1024 Bytes... from XXLD1 for instance...
Encrypt...
I can NOT try yet, because my S8600 is at Repair Service...
2.
Maybe Kies can restore M410K Original state...
http://forum.xda-developers.com/showpost.php?p=34037278&postcount=303
Now newer Version of Kies... not tested again.
3.
Sorry, I was long time not on Sam...
Sorry For Late Reply
Yes I used S8600XXKJC bootfiles for emergence flashing..
Then.. It doesn't Work?
Thanks.
Click to expand...
Click to collapse
4.
I will write PM...
Thanx in advance.
Best Regards
P.S.:
http://forum.xda-developers.com/showpost.php?p=35097338&postcount=335
CheckFusDownloader "Offline" for now...
Samsung increased Security...
For Other ideas...
1.
Last 1024 Bytes from apps_compressed.bin...
Decrypt
replace last 1024 Bytes... from XXLD1 for instance...
Encrypt...
I can NOT try yet, because my S8600 is at Repair Service...
Click to expand...
Click to collapse
You mean decrypt the LF2 apps_compressed.bin and then change last 1024 bytes, and encrypt, flash? Right?
2.
Maybe Kies can restore M410K Original state...
http://forum.xda-developers.com/showpost.php?p=34037278&postcount=303
Now newer Version of Kies... not tested again.
Click to expand...
Click to collapse
You mean downloading firmware with S/N don't you? However, I'm unable to decrypt any files. There is only M410KLF2. No .tar or .zip.
Want files?
3.
Sorry, I was long time not on Sam...
Click to expand...
Click to collapse
It's OK. I thank you You gave me hope.
4.
I will write PM...
Thanx in advance.
Best Regards
P.S.:
http://forum.xda-developers.com/showpost.php?p=35097338&postcount=335
CheckFusDownloader "Offline" for now...
Samsung increased Security...
Click to expand...
Click to collapse
Too Bad Even I had no chance to work with it.
You mean decrypt the LF2 apps_compressed.bin and then change last 1024 bytes, and encrypt, flash? Right?
Click to expand...
Click to collapse
Yes. But this could be not so easy...
I will ask some user to test it... as I can't do this without S8600...
Best Regards
adfree said:
XXKJC has folder BOOTFILES
Contain these files:
Code:
appsboot.mbn
dbl.bin
osbl.bin
partition.bin
We need these files for M410K and/or M410S...
Other ideas...
1.
Last 1024 Bytes from apps_compressed.bin...
Decrypt
replace last 1024 Bytes... from XXLD1 for instance...
Encrypt...
I can NOT try yet, because my S8600 is at Repair Service...
2.
Maybe Kies can restore M410K Original state...
http://forum.xda-developers.com/showpost.php?p=34037278&postcount=303
Now newer Version of Kies... not tested again.
3.
Sorry, I was long time not on Sam...
4.
I will write PM...
Thanx in advance.
Best Regards
P.S.:
http://forum.xda-developers.com/showpost.php?p=35097338&postcount=335
CheckFusDownloader "Offline" for now...
Samsung increased Security...
Click to expand...
Click to collapse
I wish good result, I'll wait for your result post.
FOR REAL
BEST REGARDS
adfree just you can tell what can I do
http://www.handy-faq.de/forum/samsu...custom_roms_fuer_wave_3_a-13.html#post2357346
I have asked Gunter33, maybe he could try... as he has S8600 for test.
Best Regards
I don't Know This File? What's this?
I copied form :
Code:
C:\Users\User Name*\AppData\Local\Temp\Binary\SHW-M410K\KTF\KR
http://goo.gl/q7I2k
And.. It is Only 136mb. And No .zip or .tar
http://goo.gl/FcjXu
http://goo.gl/WTc4Z
Other that is Decrypted Or Non-Decrypted are about 200mb.
Some How, I thought It is FAKE Files.
But In Kies,(I mean I downloaded with S/N)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Meaning :
Code:
Predownloading firmware for SHW-M410K succeeded.
Please confirm your model, and click here to upgrade.
In addition.. My Kies Hates My SHW-M410K.:crying:
Code:
No Reset For GT-S8600
KRLF2KTFLF2
First 140 MB is ZIP but not complete...
Will download file 2 and 3...
But it looks it is what we have, without Bootfiles...
About playing with apps_compressed.bin and last 1024 Bytes...
http://www.handy-faq.de/forum/samsu...custom_roms_fuer_wave_3_a-13.html#post2358591
and
http://www.handy-faq.de/forum/samsu...custom_roms_fuer_wave_3_a-13.html#post2358960
Code:
Download Start Ch[0]
Apps 29622.3KB OK[43.5s]
Error : CMD_USB_LOCK fail
Will check later...
Best Regards
Little progress...
http://www.handy-faq.de/forum/samsu...custom_roms_fuer_wave_3_a-13.html#post2359107
Maybe if we combine TriX Script...
DisableBadaIntegrity_v0.23.zip and/or
DisableBadaIntegrity_v0.24.zip
http://forum.xda-developers.com/showpost.php?p=34287581&postcount=249
I have "forgotten" if CheckAppIntegrity is the mandatory part...
Best Regards
If combining DisableBadaIntegrity,
can be able to run apps_compressed on GT-S8600?
CheckAppIntegrity not found (skippinG)
If there is any program that extracts firmware from phone, I will be delighted because
my father is pure bada2.0M410KKRLF2. But It is just a dream..isn't it? Impossible.
If there is any program that extracts firmware from phone
Click to expand...
Click to collapse
It is not impossible, but NOT much easier...
1.
bTerm for instance...
http://forum.xda-developers.com/showthread.php?t=1298950
But only tested/confirmed for S8500... because FOTA file...
2.
JTAG Hardware like RIFF Box for instance...
http://forum.xda-developers.com/showpost.php?p=35626872&postcount=88
If you follow Link you can find Fulldump of S8600
SAMSUNG_GTS8600_FullFlash.bin.rar
BUT this is hard to extract files and make them Multiloader compatible...
3.
Why not go Service Point or to your Provider/Operator or Shop/Saler where you buy M410K...
Best Regards
adfree said:
It is not impossible, but NOT much easier...
1.
bTerm for instance...
http://forum.xda-developers.com/showthread.php?t=1298950
But only tested/confirmed for S8500... because FOTA file...
2.
JTAG Hardware like RIFF Box for instance...
http://forum.xda-developers.com/showpost.php?p=35626872&postcount=88
If you follow Link you can find Fulldump of S8600
SAMSUNG_GTS8600_FullFlash.bin.rar
BUT this is hard to extract files and make them Multiloader compatible...
Click to expand...
Click to collapse
Will be attempted Today.
3.
Why not go Service Point or to your Provider/Operator or Shop/Saler where you buy M410K...
Click to expand...
Click to collapse
The reason why I needed firmware was to Flash my phone to original state. Yes. It can be fast.
It can be better to go Service.. But I have no time now. I have to go School Dormitory for Study start from 1, January.
Only having about 3 days.
I will attempt 2 ways that you gave, on 3days, and have 3 years good bye after.
Best Regards.
adfree said:
It is not impossible, but NOT much easier...
1.
bTerm for instance...
http://forum.xda-developers.com/showthread.php?t=1298950
But only tested/confirmed for S8500... because FOTA file...
Click to expand...
Click to collapse
Having Problem
bTerm : Able to Open
-> Check : Not Connected?
Having Problem
bTerm : Able to Open
-> Check : Not Connected?
Click to expand...
Click to collapse
Sorry.
But only tested/confirmed for S8500... because FOTA file...
Click to expand...
Click to collapse
Only in theory...
Not tested, because not enough S8600 User nor M410K or M410S User.
Sorry.
In 1 year I have seen maybe 10 S8600 user.
0 M410S User
You are the ONLY User I know with M410K...
I have tried really many things.
http://forum.gsmhosting.com/vbb/f352/korean-bada-handsets-1443940/
http://developer.bada.com/badaforum...neral-1&messageId=45758&startPage=1&curPage=1
You can see how many answers I got...
Sorry.
Best Regards
After several hours because Kies Server for this was yesterday offline...
I was able to Download few S8600 Firmware via Serial Number and also M410K Firmware...
I can confirm your KRLF2KTFLF2 for ENC3.tar is identical what I have...
1:1 same file... under Win7
...\AppData\Local\Temp\Binary\SHW-M410K\KTF\KR\KRLF2KTFLF2
File is ZIP and contain encrypted *.enc3 files... but it is NO FULL nor Bootfiles included...
Same with S8600 files I have now...
So this is what we know from CheckFusDownloader allready...
So Kies is no help.
Best Regards
adfree said:
After several hours because Kies Server for this was yesterday offline...
I was able to Download few S8600 Firmware via Serial Number and also M410K Firmware...
I can confirm your KRLF2KTFLF2 for ENC3.tar is identical what I have...
1:1 same file... under Win7
...\AppData\Local\Temp\Binary\SHW-M410K\KTF\KR\KRLF2KTFLF2
File is ZIP and contain encrypted *.enc3 files... but it is NO FULL nor Bootfiles included...
Same with S8600 files I have now...
So this is what we know from CheckFusDownloader allready...
So Kies is no help.
Best Regards
Click to expand...
Click to collapse
Meaning :
1. bTerm is only tested on S8500. So Less Possibe for S8600. Can Open but Error in Check.
2. No hope On Kies. Exact Firmware as we got. No For First(that includes OSP application files+BOOTFILES) Firmware.
3. Full Flash Bin needs progress. Less Possible.
There are many people on Korea Using SHW-M410K or S but not interested at all.
I think this is the final result ; can't find. Unabled.
I have to just use; S8600XXLD1. Bootfiles Found. But you was right. APPS_COMPRESSED.BIN IS only for SHW-M410K BOOTFILES.
Thank you for any help.
I think I have to wait for Tizen Development OR Badadroid Development On Wave3.
Or someday..will find..
There are many people on Korea Using SHW-M410K or S but not interested at all.
Click to expand...
Click to collapse
1.
Higher chance if advanced korean user with M410K and RIFF Box (JTAG) for instance...
http://forum.gsmhosting.com/vbb/f634/korean-handset-shw-xxxx-1591087/#post9062492
I have created new request, but less/low chance...
If I search for M201S or M410x nearly no posts...
2.
Maybe some friendly M410K Tester leak Bootfiles...
Low Chance...
3.
About reading Bootfiles from handset WITHOUT Hardware...
bTerm is not the only Tool...
Problem is to find the correct Tool + procedure to use...
We will see what happens in 2013...
But not count on Tizen...
For Android Porting FOTA Modificaton is missing... and as you can see.
For S8600 no ELF files leaked for "easier" Reverse Engineering...
So not expect in near future Android for S8600... nor M410x...
See here:
http://forum.xda-developers.com/showthread.php?t=1020444
Request for Boot ELFs unanswered/unsolved yet...
http://forum.xda-developers.com/showpost.php?p=32426571&postcount=68
So FOTA Developement is slow down for S8600...
Don't forget the Hardcore Display Settings... and other different Hardware...
Anyway.
We will see what happens... in 2013...
Best Regards
All right everyone here I will give u the method of writing IMEI & No Sim Detection problem of Karbonn A5/W619/Walton Primo & Karbonn A7/S01..
Many of the User of A5 are having problem with the IMEI & Mobile network lost and no sim is detecting while upgrading or downgrading Baseband.
As I have been searching for solution about a month and there is no specific solution regarding this problem..Through some ideas from different sites & developer and experimenting with my own device I have managed to write back both IMEI & enabled mobile network.
Note: For A7 user Please download AP of your device not this one.
Software & Other Requirement:
1.Stock AP of Karbonn A5/W619/Walton Primo (Original Stock GB Rom).
Link : http://jabadbd24.blogspot.com/2013/03/walton-primo-karbon-a5-downgrade-to-gb.html
2.Baseband- V3025 & V3070 both.
3.Fastboot 1.0.2.4 (for downloading AP+BP to device).
4.Drivers.
5.QPST Modem Tool V1.1 (for writing IMEI).
Link : http://www.mediafire.com/download/c9nv2zc1a233s13/Qualcomm_Modem_Tools%20V1.1.rar
6.QPST 2.7 (for restoring network).
Link : http://www.mediafire.com/download/kna2s9x3z06gcuu/QPST_2.7_378.zip
*********************************** FB ID= facebook.com/dj.rifat*****************************************************
Procedure:
A. (BP+AP) Download:
1.If u have upgraded your device to ICS then u have to Downgrade to GingerBread. First goto recovery mode(CWM/TWRP).Goto mount and select all and wipe data,system,boot,cache,android secure,SD-ext.Then Power off the device.
2.Then Update BP.First with V3025 (591347_8376_WCDMA_V3025) & then with V3070 (591347_8376_WCDMA_V3070).
[note: before updating V3070 baseband,Copy and replace 'appsboot.mbn' & 'appsboothd.mbn' this two files from the AP folder to V3070 folder in ur PC.]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3.Then update Gingerbread AP in Fastboot mode (green screen on device).
4.Turn on mobile while it is connected with the PC.PC will detect new hardware.One from them u installed before while BP Download..
5.Goto Device Manager of PC.U will find three new hardware.Install driver for them.As Shown below:
B. Write IMEI
1)Unzip “Qualcomm_Modem_Tools_V1.1.rar”, open Qualcomm_Modem_Tools.exe, (Turn on ADB Debugging from Application>Development>ADB Debugging from ur mobile)
interface as blew:
(2) Select port. Port should be same as modem port.
(3) Write IMEI. Input new IMEI, click “write”.
(4) Complete writing IMEI.
(5) Then click read, confirm the new IMEI is successful written
C.Fixing NO sim problem and Network.
Now Install ''QPST 2.7.398.exe'' on PC.
(1) Open “QPST Software Download”(Start>Programs>QPST Software Download) and click Restore, interface as below:
(2) Power on handset, connect usb cable and select port by pressing browse as shown below.
(3) Now press the 2nd browse button and navigate to the folder of V3070 Baseband folder ( '591347_8376_WCDMA_V3070' this folder) and select ''591347_8376_WCDMA_V3070.qcn'' file. Now press START ,if you have done everything correctly it will go good.
(4)Restart your mobile.Now goto to Backup Tab and type a name in QCN file column according to ur choice for better understanding which qcn file is the working backup and select location where you wanna save it and press start.This qcn file is important because if u lost ur IMEI sometimes during upgrade or downgrade restoring this file will
recover ur IMEI & network.
This way I have solved my problem.I apologize As I am not a expert in this field if any mistake done by me.
If you don't understand any steps or having problem please let me know will try my best to help you.
You can also find me in facebook/dj.rifat if need help.
Thanks.
Hit like If I have helped you.
Gr8 work bro.. i appritiate your work..!
Rifat.ahmed08 said:
All right everyone here I will give u the method of writing IMEI & No Sim Detection problem of Karbonn A5/W619/Walton Primo & Karbonn A7/S01..
Many of the User of A5 are having problem with the IMEI & Mobile network lost and no sim is detecting while upgrading or downgrading Baseband.
As I have been searching for solution about a month and there is no specific solution regarding this problem..Through some ideas from different sites & developer and experimenting with my own device I have managed to write back both IMEI & enabled mobile network.
Note: For A7 user Please download AP of your device not this one.
Software & Other Requirement:
1.Stock AP of Karbonn A5/W619/Walton Primo (Original Stock GB Rom).
Link : http://jabadbd24.blogspot.com/2013/03/walton-primo-karbon-a5-downgrade-to-gb.html
2.Baseband- V3025 & V3070 both.
3.Fastboot 1.0.2.4 (for downloading AP+BP to device).
4.Drivers.
5.QPST Modem Tool V1.1 (for writing IMEI).
Link : http://www.mediafire.com/download/c9nv2zc1a233s13/Qualcomm_Modem_Tools%20V1.1.rar
6.QPST 2.7 (for restoring network).
Link : http://www.mediafire.com/download/kna2s9x3z06gcuu/QPST_2.7_378.zip
*********************************** FB ID= facebook.com/dj.rifat*****************************************************
Procedure:
A. (BP+AP) Download:
1.If u have upgraded your device to ICS then u have to Downgrade to GingerBread. First goto recovery mode(CWM/TWRP).Goto mount and select all and wipe data,system,boot,cache,android secure,SD-ext.Then Power off the device.
2.Then Update BP.First with V3025 (591347_8376_WCDMA_V3025) & then with V3070 (591347_8376_WCDMA_V3070).
[note: before updating V3070 baseband,Copy and replace 'appsboot.mbn' & 'appsboothd.mbn' this two files from the AP folder to V3070 folder in ur PC.]
3.Then update Gingerbread AP in Fastboot mode (green screen on device).
4.Turn on mobile while it is connected with the PC.PC will detect new hardware.One from them u installed before while BP Download..
5.Goto Device Manager of PC.U will find three new hardware.Install driver for them.As Shown below:
B. Write IMEI
1)Unzip “Qualcomm_Modem_Tools_V1.1.rar”, open Qualcomm_Modem_Tools.exe, (Turn on ADB Debugging from Application>Development>ADB Debugging from ur mobile)
interface as blew:
(2) Select port. Port should be same as modem port.
(3) Write IMEI. Input new IMEI, click “write”.
(4) Complete writing IMEI.
(5) Then click read, confirm the new IMEI is successful written
C.Fixing NO sim problem and Network.
Now Install ''QPST 2.7.398.exe'' on PC.
(1) Open “QPST Software Download”(Start>Programs>QPST Software Download) and click Restore, interface as below:
(2) Power on handset, connect usb cable and select port by pressing browse as shown below.
(3) Now press the 2nd browse button and navigate to the folder of V3070 Baseband folder ( '591347_8376_WCDMA_V3070' this folder) and select ''591347_8376_WCDMA_V3070.qcn'' file. Now press START ,if you have done everything correctly it will go good.
(4)Restart your mobile.Now goto to Backup Tab and type a name in QCN file column according to ur choice for better understanding which qcn file is the working backup and select location where you wanna save it and press start.This qcn file is important because if u lost ur IMEI sometimes during upgrade or downgrade restoring this file will
recover ur IMEI & network.
This way I have solved my problem.I apologize As I am not a expert in this field if any mistake done by me.
If you don't understand any steps or having problem please let me know will try my best to help you.
You can also find me in facebook/dj.rifat if need help.
Thanks.
Hit like If I have helped you.
Click to expand...
Click to collapse
Thank you very much. can u please tell about karbonn a7 plus stock AP where to find. i m having this mobile and facing the same problem.
Thank you so much!!!
I made an account just to say thank for this GUIDE. I was looking and waiting for a year for this GUIDE. THANK YOU SO MUCH!!!:good:
#Respect
Just register an account to post reply. Great work bro, help me pick my phone up from hell :laugh::good::good::good:
vktisnow said:
Thank you very much. can u please tell about karbonn a7 plus stock AP where to find. i m having this mobile and facing the same problem.
Click to expand...
Click to collapse
got my problem solved. thanks a lot for this awesome guide
Anybody can give proper link for the Files.. Most of them are DEAD !!!
i found Port number (COM6).. after this i am unable to write IMEI number(getting error Write IMEI fail). i have entered my old imei number.
when i dial *#06# in my mobile displaying as below:
IMEI1:
IMEI2:
both blanks...(So i entered old IMEI numbers).
And from where can i get new IMEI numbers?
can you please help me on this.
Does this work for SM-A520FDS?
no way to putt NCK , no information on internet , Putty erro, DC unlocker not support .if found NCK how do i use that ? firmware update?? but where? this is real challenging for me
tks
ATI
Manufacturer: Huawei Technologies Co., Ltd.
Model: HWD14
Revision: 11.232.03.10.824
IMEI: 3528980453****
+GCAP: +CGSM
OK
AT^NVRDEX=50503,0,128
ERROR
Anandasri2 said:
no way to putt NCK , no information on internet , Putty erro, DC unlocker not support .if found NCK how do i use that ? firmware update?? but where? this is real challenging for me
tks
ATI
Manufacturer: Huawei Technologies Co., Ltd.
Model: HWD14
Revision: 11.232.03.10.824
IMEI: 3528980453****
+GCAP: +CGSM
OK
AT^NVRDEX=50503,0,128
ERROR
Click to expand...
Click to collapse
Found modem : M9625E-1
Model : Huawei HWD15
IMEI : 352898045xxxxxx
Serial NR. : N7SDW1431700xxxx
Firmware : 11.232.03.10.824
Dashboard version : 22.001.26.06.824
SIM Lock status : Locked (Card lock)
Wrong codes entered : 0 (unlock attempts left : 10)
sorry, this modem not supported !
Anandasri2 said:
Found modem : M9625E-1
DC unlocker
Model : Huawei HWD15
IMEI : 352898045xxxxxx
Serial NR. : N7SDW1431700xxxx
Firmware : 11.232.03.10.824
Dashboard version : 22.001.26.06.824
SIM Lock status : Locked (Card lock)
Wrong codes entered : 0 (unlock attempts left : 10)
sorry, this modem not supported !
Click to expand...
Click to collapse
CardLock_UnLock-e58xx/HUAWEI MODEM Code Writer not working ether for NCK enter may be Firmware block ..!
Anandasri2 said:
CardLock_UnLock-e58xx/HUAWEI MODEM Code Writer not working ether for NCK enter may be Firmware block ..!
Click to expand...
Click to collapse
only firmware online is "easy-firmware" looks scam to me cuss it's paid and suspicious .
HWD14_11.232.03.30.824_22.001.26.06.824
HWD14TCPU-V100R001B232D03SP30C824_Firmware_05012FPY.zip
Date: 26-09-2018 | Size: 270.65 MB
found something working but got error
"CardLock_UnLock-e58xx " code writer detect this device but when enter NCK its got error, may be due to firmware block
For NCK used old V1 algo cuss imei# start we 35XXXXXXXXXXX
but non of attempts count according to DC unlocker still remain 10 chances
if not found any solution soon i will try to update it by Web UI built in using auto update, but still hesitate to do cuss it may more difficult to unlock
*i tried using puty telnet /Serial commands but no success
++++++++++++++++++++++++++++++++++++++++
1.at^sfm=1
2.at^reset
3.AT^NVWREX=8268,0,12,1,0,0,0,2,0,0,0,A,0,0,0
4.at^sfm=0
5.at^reset
+++++++++++++++++++++++++++++++++++
atc ati
atc at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0,a,0,0,0
+++++++++++++++++++++++++++++++++++=
ATI
ATI
AT^NVRDEX=50503,0,128
++++++++++++++++++++++++++++++++++++
if i found any progress i will update , also if some one can help much appreciate...!:angel:
tks,
Anandasri2 said:
only firmware online is "easy-firmware" looks scam to me cuss it's paid and suspicious .
HWD14_11.232.03.30.824_22.001.26.06.824
HWD14TCPU-V100R001B232D03SP30C824_Firmware_05012FPY.zip
Date: 26-09-2018 | Size: 270.65 MB
found something working but got error
"CardLock_UnLock-e58xx " code writer detect this device but when enter NCK its got error, may be due to firmware block
For NCK used old V1 algo cuss imei# start we 35XXXXXXXXXXX
but non of attempts count according to DC unlocker still remain 10 chances
if not found any solution soon i will try to update it by Web UI built in using auto update, but still hesitate to do cuss it may more difficult to unlock
*i tried using puty telnet /Serial commands but no success
++++++++++++++++++++++++++++++++++++++++
1.at^sfm=1
2.at^reset
3.AT^NVWREX=8268,0,12,1,0,0,0,2,0,0,0,A,0,0,0
4.at^sfm=0
5.at^reset
+++++++++++++++++++++++++++++++++++
atc ati
atc at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0,a,0,0,0
+++++++++++++++++++++++++++++++++++=
ATI
ATI
AT^NVRDEX=50503,0,128
++++++++++++++++++++++++++++++++++++
if i found any progress i will update , also if some one can help much appreciate...!:angel:
tks,
Click to expand...
Click to collapse
working this command
but
ATI
> AT ^ CARDLOCK?
^ CARDLOCK: 1,10,0
when enter
AT ^ CARDLOCK = "Xx NCK CodeXXX" nothings happen so i realize this is firmware block ...
so i have to find modified firmware for do this so if any one have access to easy-firmware. com resource and get "HWD14_11.232.03.30.824_22.001.26.06.824 HWD14TCPU-V100R001B232D03SP30C824_Firmware_05012FPY.zip" pls share with me : so at least give a try ..
Anandasri2 said:
working this command
but
ATI
> AT ^ CARDLOCK?
^ CARDLOCK: 1,10,0
when enter
AT ^ CARDLOCK = "Xx NCK CodeXXX" nothings happen so i realize this is firmware block ...
so i have to find modified firmware for do this so if any one have access to easy-firmware. com resource and get "HWD14_11.232.03.30.824_22.001.26.06.824 HWD14TCPU-V100R001B232D03SP30C824_Firmware_05012FPY.zip" pls share with me : so at least give a try ..
Click to expand...
Click to collapse
+++++++++++++++++++++ DAY 5 ++++++++++++++++++++++++++++
finally found way to download original Firmware , with all revision
HWD14_UPDATE_11.232.03.10.824_22.001.26.06.824.ZIP English/Japanese
HWD14_UPDATE_11.232.03.30.824_22.001.26.06.824.ZIP English/Japanese
bit of research i realize ZIP is a compressed bin file, not a compressed package.. also i know nothing abut these files so i have to dig more to learn how to handle those file may it's impossible but still i don't
know :laugh:
now i have
*firmware file
*Hi links drivers to enable COM port
Anandasri2 said:
+++++++++++++++++++++ DAY 5 ++++++++++++++++++++++++++++
finally found way to download original Firmware , with all revision
HWD14_UPDATE_11.232.03.10.824_22.001.26.06.824.ZIP English/Japanese
HWD14_UPDATE_11.232.03.30.824_22.001.26.06.824.ZIP English/Japanese
bit of research i realize ZIP is a compressed bin file, not a compressed package.. also i know nothing abut these files so i have to dig more to learn how to handle those file may it's impossible but still i don't
know :laugh:
now i have
*firmware file
*Hi links drivers to enable COM port
Click to expand...
Click to collapse
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
working with some tools in linux (binwalk... ect ) but still no luck if some one can mod this firmware pls let me know i will send the link ... cuss it's long way to go learn Reverse Engineering :silly:
Anandasri2 said:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
working with some tools in linux (binwalk... ect ) but still no luck if some one can mod this firmware pls let me know i will send the link ... cuss it's long way to go learn Reverse Engineering :silly:
Click to expand...
Click to collapse
FM file links
http://update.hicloud.com:8180/TDS/..._UPDATE_11.232.03.10.824_22.001.26.06.824.ZIP
http://update.hicloud.com:8180/TDS/..._UPDATE_11.232.03.30.824_22.001.26.06.824.ZIP
Anandasri2 said:
FM file links
http://update.hicloud.com:8180/TDS/..._UPDATE_11.232.03.10.824_22.001.26.06.824.ZIP
http://update.hicloud.com:8180/TDS/..._UPDATE_11.232.03.30.824_22.001.26.06.824.ZIP
Click to expand...
Click to collapse
doesn't work because the file is corrupted looks like it's faking about corrupt cuss looks suspicious to me ,i think archive is good but they don't need open it easily:laugh: still looking forward
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anandasri2 said:
doesn't work because the file is corrupted looks like it's faking about corrupt cuss looks suspicious to me ,i think archive is good but they don't need open it easily:laugh: still looking forward
Click to expand...
Click to collapse
In this tutorial we are going to Repair Realme 3 (RMX1821) MT6771 Chipset.
from being hard bricked (no charge, no recovery, no fastboot) using SP Flashtool.
with the help of Bypass Utility "MTK-bypass" to disable bootrom protection(sla and daa).
MTK-bypass credits to @k4y0z
, @chaosmaster and @xyzz on github.
REQUIREMENTS:
• Python
Download Python
The official home of the Python Programming Language
www.python.org
• libusb-win32
https://sourceforge.net/projects/libusb-win32/files/libusb-win32-releases/1.2.6.0/libusb-win32-devel-filter-1.2.6.0.exe/download
• Sp Flashtool
SP Flash Tool Download All versions for MediaTek Devices
SP Flash tool download is the best application to flash Stock firmware, Custom recovery and fix some extreme issues on MediaTek Android smartphones. Download SP Flash tool all versions from our official download page.
spflashtool.com
• Bypass Utility Compiled
18.9 KB file on MEGA
mega.nz
---------------------------------------------------------------
• Bypass Utility Latest Releases
Release 1.4.1 · MTK-bypass/bypass_utility
Improve handshake reliability
github.com
• Exploits Latest Releases
Release 1.5 · MTK-bypass/exploits_collection
mt6261 mt6572 mt6580 mt6582 mt6735 mt6737 mt6739 mt6755 mt6757 mt6761 mt6763 mt6765 mt6768 mt6771 mt6785 mt6799 mt6873 mt8127 mt8163 mt8173 mt8695
github.com
• Realme 3 (rmx1821) Flashtool Firmware link soon
> I will upload the realme 3 firmware with Scatter File and Auth File for Third Party Flashtool like SP Flashtool soon, but if you have an official firmware of realme 3 with Scatter and Auth File you can use it no matter what version it is.
> If you know how to extract an OFP file, you can download this realme 3|3i firmware and extract the OFP file.
https://fileload.coloros.com/30842RMX1821EX_11_C.17_201117_cb5665f2.zip
> Video Tutorial on how to Extract OPPO | REALME firmware (OFP file)
VIDEO TUTORIAL
TEXT TUTORIAL
INSTALLATION:
• Install Python (tick checkbox "Add Python X.X to PATH") and proceed.
( if you are using windows 10, Download and Install Python 3.9 through Microsoft Store )
• Install lib-usb_win32
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click Next>Next> until you see the next image
Click Finish and Launch Lunch Filter Wizard
Choose the "Install a device filter" and click next
You will see this device selection.
Now you will need to connect you phone with power off to computer.
> Hold all the buttons and connect to the computer (wait until you see Mediatek USB Port in libusb Device selection and Install)
(note: you have to select and install it very quick, because the phone disconnect in just a few seconds)
> Wait until it shows this (Click OK and close libusb and Disconnect your phone)
INITIALIZATION:
• Extract Bypass Utility, and go to extracted folder
> type "cmd" in the address bar and hit enter
> in cmd console install (Install pyusb, pyserial, json5)
by typing: pip install pyusb pyserial json5
> after that bypass mtk
by typing: python main.py
> when you see "Waiting for bootrom" , you need to connect your phone again (Holding all button and plug it into your computer and wait until it recognized.)
you should have this following output. do not close this window and remember the Found port of you phone
as you can see my port is = COM7
DO NOT DISCONNECT YOUR PHONE FROM COMPUTER THIS TIME
FLASHING FIRMWARE:
• Extract SP Flashtool and Realme 3 Firmware
• Open flashtool.exe and click Options>Connection
and tick AURT instead of USB.
Select the COM port of the phone which is COM7 in my case
then close Option Window
• Now In Flashtool choose Scatter-File from the Extracted Firmware of Realme 3
(wait until it finished the Processing)
• After that choose Authentication File
• After loading Scatter and Auth File Click Download
It should start downloading the firmware to you phone now without any error.
(wait until it finished the download.)
When finished downloading you get a check windows indicating that the flash was successful!
Thats it Congratulations! You may now disconnect your phone from your computer and POWER ON.
your DEAD [HardBricked] Realme 3 is now Alive!
(Note: This method is applicable to any MTK devices with SoC mt6735, mt6750, mt6765, mt6771, mt6785, mt8127, mt8163, mt8173, mt8695)
For more updates about MTK-Bypass visit the official github page @
MTK-bypass
MTK-bypass has 8 repositories available. Follow their code on GitHub.
github.com
all the tools and utility is not mine. credits to the developer.
Original Bypass Tool xdaThread
[MOD][DEV] MediaTek / MTK - Auth Bypass (SLA/DAA) - Utility
As some of you have already noticed, a couple of weeks ago @Dinolek and I published a utility, that allows bypassing authentication on MTK devices. The tool is based on an exploit dubbed kamakiri, which was originally found by @xyz` and released...
forum.xda-developers.com
special thanks to @popoff-r for mentioning about a thread of repairing MTK devices.
Thanks
fawazahmed0 said:
Thanks
Click to expand...
Click to collapse
so its you , i thought the two in the credits in your github bypass_utility is one who develop it. im sorry sir. im not really familliar where to see the owner of the work it github. im really sorry for not mentioning your name in this. gotta edit now. You are Great sir!
ATDteam said:
so its you , i thought the two in the credits in your github bypass_utility is one who develop it. im sorry sir. im not really familliar where to see the owner of the work it github. im really sorry for not mentioning your name in this. gotta edit now. You are Great sir!
Click to expand...
Click to collapse
Thank you for putting this altogether, this should speed up the development work for this phone(kernel etc), as people don't have to go to service center for hard brick.
Also I want to tell you, I shouldn't get the credits for bypass_utility, the two people you mentioned should be getting the credits, I just forked(copy/cloned) the repository.
I assume you are new to github, anyone can fork(copy/clone) a repository by clicking on fork button
You can differentiate whether a repository is forked(copied) or original by seeing on the top left side.
Thanks
fawazahmed0 said:
Thank you for putting this altogether, this should speed up the development work for this phone(kernel etc), as people don't have to go to service center for hard brick.
Also I want to tell you, I shouldn't get the credits for bypass_utility, the two people you mentioned should be getting the credits, I just forked(copy/cloned) the repository.
I assume you are new to github, anyone can fork(copy/clone) a repository by clicking on fork button
View attachment 5205247
You can differentiate whether a repository is forked(copied) or original by seeing on the top left side.
View attachment 5205251
Thanks
Click to expand...
Click to collapse
Thank you so much that was a very helpful information.
How to fix this error sir..
What Error?, please provide screenshot of the error, if you can't explain it.
ATDteam said:
What Error?, please provide screenshot of the error, if you can't explain it.
Click to expand...
Click to collapse
Tihis sir
What Error?, please provide screenshot of the error, if you can't explain it.
Al Djufri said:
Tihis sir
View attachment 5207505
Click to expand...
Click to collapse
try to uninstall python and reinstall again, also download the bypass_utility, the one that i attached in this thread.
and try again. make sure your usb cable is working properly, it seems that your device does not read properly by the utility. change your cable if posible. Download python 3.9, if still doest work. try using windows 10 OS.
18.9 KB file on MEGA
mega.nz
ATDteam said:
What Error?, please provide screenshot of the error, if you can't explain it.
try to uninstall python and reinstall again, also download the bypass_utility, the one that i attached in this thread.
and try again. make sure your usb cable is working properly, it seems that your device does not read properly by the utility. change your cable if posible. Download python 3.9, if still doest work. try using windows 10 OS.
18.9 KB file on MEGA
mega.nz
Click to expand...
Click to collapse
Reinstalling python
Reinstalling lib libusb
Changing usb cable
Changing port usb
Change pc, i mean borrow a pc from my friend
Changing spflashtool, same problem sir?
Do you have telegram account
thanks it works thanks for saving my phone
Its not the same in your first screenshot you reach "Disabling protection" but in the 2nd one only the utility found your phone..., did you release all the buttons emmidiately after your computer detects your phone phone? It is important that you release emmidiately. Did you try to use windows 10.? Sorry I dont have telegram.
Al Djufri said:
Reinstalling python
Reinstalling lib libusb
Changing usb cable
Changing port usb
Change pc, i mean borrow a pc from my friend
Changing spflashtool, same problem sir?
Do you have telegram accountView attachment 5208303
Click to expand...
Click to collapse
XxRRSxX said:
thanks it works thanks for saving my phone
Click to expand...
Click to collapse
Thanks for using this thread as your guide, but credits is to the developers of the Utility.
ATDteam said:
Its not the same in your first screenshot you reach "Disabling protection" but in the 2nd one only the utility found your phone..., did you release all the buttons emmidiately after your computer detects your phone phone? It is important that you release emmidiately. Did you try to use windows 10.? Sorry I dont have telegram.
Click to expand...
Click to collapse
I'm trying to with my friend pc(windows 10) using latest python and same error sir..
Always Immediately release my button when pc detection my device.. but same error
( SOLVED )
you must be use windows 10
Use latest python version
Use latest SpFlash tool version
And don't forget to chek libusb instalation
Check via cmd "pip install libusb" and "pip install libusb1"
And try to use command "python main.py"
Sorry for my English..
Thanks sir..
Al Djufri said:
( SOLVED )
you must be use windows 10
Use latest python version
Use latest SpFlash tool version
And don't forget to chek libusb instalation
Check via cmd "pip install libusb" and "pip install libusb1"
And try to use command "python main.py"
Sorry for my English..
Thanks sir..
View attachment 5208681
Click to expand...
Click to collapse
Nice thats great! sometimes you really need to be on Trial and Error before you achieve what you want. happy for you. Thank you for using my thread as guide, Credits to the developers of the utility. and you have a good english. mine is bad. :-D
Anyone who facing problem when bootrom check, you have to flash first time or it will show error. Otherwise you have to uninstall and reinstall libusb.exe and others.
Ok, thanks to ATDTEAM, very much, I bricked by patching boot image with magisk and flashing it, successfully flashed stock rom .ofp with SP Flash tool, not only this , I itentionally flashed another version , and it worked to, thnx to the bypass utility, it generates questions, the realme provides ozip files, so where are .ofp files coming from, or where we can get it, and... Fawazahmed0 , I am unable to flash twrp, I tried everything I could, I am on updated Android 10 c.19 now, so I can't flash custom recovery or root it... I can't even rollback bcoz I unable to find the older version ofp files, the ozip files just don't install, so please help for rooting Android 10, You have solved a major hurdle by introducing the method of bypass sp tool flashing but, the next step of flashing custom recovery and then rooting awaits... Pls help/ guide, Thnx...
Thanks brother, I've recently unbricked my device
i've seen too many videos on youtube that teach indian users how to enable automatic call recording on their samsung a32 4g , but unfortunately that option is not available on my device.
is it possible that some how i get that feature ?
for example by dumping an indian phone apk file or something ?
amiravandfar said:
i've seen too many videos on youtube that teach indian users how to enable automatic call recording on their samsung a32 4g , but unfortunately that option is not available on my device.
is it possible that some how i get that feature ?
for example by dumping an indian phone apk file or something ?
Click to expand...
Click to collapse
i would really appreciate if a user from india extracts phone dialer apk and uploads it here so we can test.
i've seen the same worked for huawei phones.
To activate the call recording it is not the call apk, it is a code that is added to the build.pro or the csc, I do not remember well in one of the two.
PatricioCarrasco said:
To activate the call recording it is not the call apk, it is a code that is added to the build.pro or the csc, I do not remember well in one of the two.
Click to expand...
Click to collapse
thanks for your insight, i was totally clueless before.
it's csc , which is the country code.
here is my experience id like to share :
1-dial *#1234# with your dialer , and it shows you 3 numbers , screenshot it and save it somewhere diffrent than in your phone.
2-download your indonesian firmware for a32 from sammobile that has the same version ending characters as yours.
3-choose home csc from the package and put it in csc part of odin.
4- connect your pc to your phone with an original cable to a usb2 port (if you are on a pc , use backside ports of case) , disconnect every other usb devices.
5-click start of odin , the whole process should be completed in less than a minute and you will get native call recording without data loss.
Thanks for this guide. Works without data loss.
amiravandfar said:
here is my experience id like to share :
1-dial *#1234# with your dialer , and it shows you 3 numbers , screenshot it and save it somewhere diffrent than in your phone.
2-download your indonesian firmware for a32 from sammobile that has the same version ending characters as yours.
3-choose home csc from the package and put it in csc part of odin.
4- connect your pc to your phone with an original cable to a usb2 port (if you are on a pc , use backside ports of case) , disconnect every other usb devices.
5-click start of odin , the whole process should be completed in less than a minute and you will get native call recording without data loss.
Click to expand...
Click to collapse
HI,
in my case, Galaxy A32 4g, it works great, take less than 30s. If I need to make a factory reset? My old CSC was OXM, is it still in the phone?
Best regards
amiravandfar said:
here is my experience id like to share :
1-dial *#1234# with your dialer , and it shows you 3 numbers , screenshot it and save it somewhere diffrent than in your phone.
2-download your indonesian firmware for a32 from sammobile that has the same version ending characters as yours.
3-choose home csc from the package and put it in csc part of odin.
4- connect your pc to your phone with an original cable to a usb2 port (if you are on a pc , use backside ports of case) , disconnect every other usb devices.
5-click start of odin , the whole process should be completed in less than a minute and you will get native call re
Click to expand...
Click to collapse
amiravandfar said:
here is my experience id like to share :
1-dial *#1234# with your dialer , and it shows you 3 numbers , screenshot it and save it somewhere diffrent than in your phone.
2-download your indonesian firmware for a32 from sammobile that has the same version ending characters as yours.
3-choose home csc from the package and put it in csc part of odin.
4- connect your pc to your phone with an original cable to a usb2 port (if you are on a pc , use backside ports of case) , disconnect every other usb devices.
5-click start of odin , the whole process should be completed in less than a minute and you will get native call recording without data loss.
Click to expand...
Click to collapse
Please I want to find out whether I have to root my phone before I start or I should just go ahead without rooting the phone. I'm grateful for sharing your knowledge here.
[email protected] said:
HI,
in my case, Galaxy A32 4g, it works great, take less than 30s. If I need to make a factory reset? My old CSC was OXM, is it still in the phone?
Best regards
Click to expand...
Click to collapse
Its not stored in the phone , if you reset factory it will be reset with the new csc !
della-dell said:
Please I want to find out whether I have to root my phone before I start or I should just go ahead without rooting the phone. I'm grateful for sharing your knowledge here.
Click to expand...
Click to collapse
No rooting is required.
amiravandfar said:
here is my experience id like to share :
1-dial *#1234# with your dialer , and it shows you 3 numbers , screenshot it and save it somewhere diffrent than in your phone.
2-download your indonesian firmware for a32 from sammobile that has the same version ending characters as yours.
3-choose home csc from the package and put it in csc part of odin.
4- connect your pc to your phone with an original cable to a usb2 port (if you are on a pc , use backside ports of case) , disconnect every other usb devices.
5-click start of odin , the whole process should be completed in less than a minute and you will get native call recording without data loss.
Click to expand...
Click to collapse
Please I have downloaded and installed the Odin3 v3.14. I have downloaded the package and chosen the Home CSC and put it in the CSC section of Odin. I clicked START and nothing happens. Please help me. I have attached some images to help you understand my problem so you can guide me. Thank you.
amiravandfar said:
No rooting is required.
Click to expand...
Click to collapse
amiravandfar said:
here is my experience id like to share :
1-dial *#1234# with your dialer , and it shows you 3 numbers , screenshot it and save it somewhere diffrent than in your phone.
2-download your indonesian firmware for a32 from sammobile that has the same version ending characters as yours.
3-choose home csc from the package and put it in csc part of odin.
4- connect your pc to your phone with an original cable to a usb2 port (if you are on a pc , use backside ports of case) , disconnect every other usb devices.
5-click start of odin , the whole process should be completed in less than a minute and you will get native call recording without data loss.
Click to expand...
Click to collapse
After change csc ,when you make call is caller ID fail to identify number region? I guess it will fail..pls confirm
Please update, I need this as well. When you change the CSC does it do a reset? That is usually required. I'm trying to do it on my brothers phone and would rather not tell him i need to do a hard reset
Sir, I have done procedure step by step as you guided but in notification message shown, (Process completed 0/ successful 0). Nothing change in mobile too. please guide about your Point 4. Either we connect mobile with PC through USB cable without Flashing mode or put mobile in flashing mode first then connect to PC? Please guide step by step, because I am a simple mobile user not software engineer. Thanks in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[email protected] said:
HI,
in my case, Galaxy A32 4g, it works great, take less than 30s. If I need to make a factory reset? My old CSC was OXM, is it still in the phone?
Best regards
Click to expand...
Click to collapse
Hi, I have performed step by step all procedure but not successful. Screen short attached. Please guide, either attache Mobile with PC in Flashing mode (using Home+Power+vol down key) or simply attach with USB cable and allow to use data?