Develop Bugs

[Q] CM7 nightly doubts.

Few n00b questions.
Firstly, how do i flash a nightly on my phone? lets say im running ofw 2.2 SEA edition? Do i follow the same procedure as if to flash RC1... do i also need to flash gapps similarly.
Secondly, are the links on quarxs' CM7 for defy thread up-to-date? or are there newer versions of gapps and nightlies floating around somewhere
Third, i have noticed that there is an issue with network and wi-fi when i flash cm7 RC1 over the nordic sbf. when i go back to official 2.2 SEA there is no hassle at all. Since i live in india i was wondering if that was the issue. I can easily take care of the network problem using "baseband switcher for defy" but it still doesnt help the wi-fi problem.
My question is.. will using the new BOOTSEA nightly solve this problem. I am assuming from the name is boot"SEA" im assuming its built southeastasia specific.
Fourth, ive used CM7 RC1 for a while and apart from the wifi issue i got problems with camera and video... it absolutely doesnt work, wether it be in potrait or landscape or whatever setting... the app just force closes. Any fixes for that.. ive got green lens.
please help!!! and i hope other similar questions can be added by members here so as to make this thread an FAQ for distressed users like me.
Thanks

deathw15h said:
Few n00b questions.
Firstly, how do i flash a nightly on my phone? lets say im running ofw 2.2 SEA edition? Do i follow the same procedure as if to flash RC1... do i also need to flash gapps similarly.
--> I'd say install RC1 and gapps first, then try a nightly by just wiping cache and Dalvik - no need to install gapps again since they're on your phone now. If you install a BOOT version and want to go back to an earlier CM7 nightly, then you might want to start from scratch, reflash froyo and install RC1 + gapps again.
Secondly, are the links on quarxs' CM7 for defy thread up-to-date? or are there newer versions of gapps and nightlies floating around somewhere
--> mostly up to date, but I don't worry about gapps too much as I believe that the Market gets updated automatically anyway (but I might be wrong about that). On the OP, the link to the gapps should show you up to date versions; but read the comments on there - very important.
Third, i have noticed that there is an issue with network and wi-fi when i flash cm7 RC1 over the nordic sbf. when i go back to official 2.2 SEA there is no hassle at all. Since i live in india i was wondering if that was the issue. I can easily take care of the network problem using "baseband switcher for defy" but it still doesnt help the wi-fi problem. My question is.. will using the new BOOTSEA nightly solve this problem. I am assuming from the name is boot"SEA" im assuming its built southeastasia specific.
---> same here my wifi DL speed was really bad for the last month or so on CM7; only after BOOT179-4 install, my wifi speed somewhat got back to normal.
Fourth, ive used CM7 RC1 for a while and apart from the wifi issue i got problems with camera and video... it absolutely doesnt work, wether it be in potrait or landscape or whatever setting... the app just force closes. Any fixes for that.. ive got green lens.
---> My camera and video worked on RC1 (and earlier) but video recording had some chopiness at times. Around July 11th nightly, Quarx released a camera fix (in that nightly) that solved the problem for me. But then days later, on newer nightly builds, I got the FC problem on video camera (same as you but red lens here). Then with BOOT179-4, camera was fine again and so the wifi speed; so all good for me.
--------> I really don't know what's going on with the video camera: many poeple have problems and many have it working on every nightly builds. It has been a problem from day one for Quarx on CM7-jordan... You have to try and see which build works for you I guess. And like you said, BOOT-SEA definitely looks like something you should try - many people liked it and many people say yesterday nightly is the best for them so far... so go on and have fun with testing
---> Before you do more testing though, you can always do a backup from the custom recovery so it will be easy for you to restore your current phone state -if nothing improves. I do this all the time: stock recovery factory reset, nordic flashing, RC1 install then restore my (BOOT179-4 now) backup.
Please help!!! and i hope other similar questions can be added by members here so as to make this thread an FAQ for distressed users like me.
---> I did try to help - I hope I did! If so, you can use that "Thanks" button - hehe!
---> Not sure that a thread entitled "nightly doubts" will become a very popular
FAQ thread though
Thanks
Click to expand...
Click to collapse
........................

[] AL [] said:
........................
Click to expand...
Click to collapse
thanks for all the help

There is a FAQ for flashing cm7 go and read it There is no need for threats like This
Send from my brain using Tapatalk

dumrul said:
There is a FAQ for flashing cm7 go and read it There is no need for threats like This
Send from my brain using Tapatalk
Click to expand...
Click to collapse
i went thru the whole FAQ but my doubts are regarding the nightlies which it doesnt address hence the thread.
thx for the concern though.

downloaded the BOOTSEA, but there is another file "cm7-110726-0018-BOOTSEA-Jordan.zip.md5sum" mentioned below it. ( there are similar md5sum files for all nightlies...) are they essential ? and how do i use them.
wanted to clarify before proceeding.

deathw15h said:
downloaded the BOOTSEA, but there is another file "cm7-110726-0018-BOOTSEA-Jordan.zip.md5sum" mentioned below it. ( there are similar md5sum files for all nightlies...) are they essential ? and how do i use them.
wanted to clarify before proceeding.
Click to expand...
Click to collapse
Md5 files are to verify your download is not corrupted one. Which you can compare the md5 after downloading the zip file and regenerating the md5 of downloaded file and check against the one in the server.
Sent from my MB525 using XDA App

deathw15h said:
thanks for all the help
Click to expand...
Click to collapse
No problem.
Go read here on the official CM7-jordan thread: http://forum.xda-developers.com/showthread.php?t=1033654&page=943
And from post 9429 particularily; pretty much goes in the same direction I was pointing at regarding the wifi and video camera...
How's the BOOTSEA doing for you?

The nightly ones is just the output that the ones who are working on the rom ups to us. Normally have all that part on topic that say "next version:..."
If you wanna try the nightly one, use as the *.zip that you download when got the "rc1 v2" for exemple. So wipe the phone, choose install from a zip of the sdcard and choose the *.zip, been it the rc1 or the nightly build.
The md5sum file is the one that contains the 5sum from the file. Its nornaly given when you have to download a big file and have fear to corrupt the file. If you use linux, go on terminal and type "5sum file" when file is the name of any file that you have. It will give you a big number. This is the 5sum. The *.md5sum have the 5sum of the respective *.zip nightly rom.
Sent from my MB525 using XDA App

how is the battery life with the nightly builds?

what android version is the 27/7 nightly build using? is it 2.3.5?

yup..its 2.3.5

Dolphin incompatible with Android 4.1.2?

Anyone finding that Dolphin 9.0 says it's incompatible with the Nexus 7 running stock 4.1.2?
I just went to install the new Jetpack add on, and found that the version running on my N7 is older (8.5 something) versus my phone (running a CM10 based ROM with 4.1.2 in it).

haloeight said:
Anyone finding that Dolphin 9.0 says it's incompatible with the Nexus 7 running stock 4.1.2?
I just went to install the new Jetpack add on, and found that the version running on my N7 is older (8.5 something) versus my phone (running a CM10 based ROM with 4.1.2 in it).
Click to expand...
Click to collapse
Doesn't look like jetpack is available yet for tablets. Where jetpack requires 9.0 where you found out that the current N7 has an older version.
On an off note, there is a Dolphin for Pad version. Made for Android tablets. However the browser is not compatible with the jetpack add on...yet. Be patient, I'm sure they will come out with a tablet version soon.

Thanks for confirming.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Just received a response from Dolphin support:
I'm so sorry for the inconvenience.
We find the issue occurs while installing Dolphin Browser on tablets. And we are currently working on it. Please keep update with us.
Click to expand...
Click to collapse

+1 Was just about to ask the same question, its the same on 4.1.1 and 4.1.2 "not supported on your device" i can install jetpack though, gutted because its a really smooth browser, why isnt chrome that smoooth!?

What i did was sideload the dolphin 9 apk from a titanium backup on my phone. Just shared it to google drive and installed from that app on my nexus...installs just fine and jetpack works as intended.
Sent from my SPH-D710 using Tapatalk 2

Is flash compatible with Dolphin?

Dolphin is visible in the app store again. They must have fixed the compatibility flags.
I seriously doubt if the new version works with Flash though - we had to use a specific older version for that.
Someone install the new one and try it!

rmm200 said:
Dolphin is visible in the app store again. They must have fixed the compatibility flags.
I seriously doubt if the new version works with Flash though - we had to use a specific older version for that.
Someone install the new one and try it!
Click to expand...
Click to collapse
Yep..they fixed it and I can install it on my tablet today. Last night it wouldn't.
Really fast browser....but why don't they make the interface better? You have to press 3 buttons to get to share or settings.

Anyone have issues with 9.0 constantly crashing? I've never had it either just "disappear" or pop up a "Dolphin has Crashed, E-mail debug log" before today, and it's happened twice in the space of 5 mins with the latest update.

kcrudup said:
Anyone have issues with 9.0 constantly crashing? I've never had it either just "disappear" or pop up a "Dolphin has Crashed, E-mail debug log" before today, and it's happened twice in the space of 5 mins with the latest update.
Click to expand...
Click to collapse
I have got it running fine no issues no fc's
From the darkest reaches of my mind...... Somebody turn on the light

zolaisugly said:
I have got it running fine no issues no FCs
Click to expand...
Click to collapse
Yeah, wiping its data cleared up my FC issues.
But I had to revert to the previous version- the context menu (long-press) is gone on images, so I can't save them anymore. I've reported it though, so hopefully it'll come back in the next version.

kcrudup said:
I had to revert to the previous version- the context menu (long-press) is gone on images, so I can't save them anymore. I've reported it though, so hopefully it'll come back in the next version.
Click to expand...
Click to collapse
They released an update to Jetpack (go figure) that fixed this today, so I'm now up-to-date!

OmniROM

** If you are interested in taking over the project, pm me **
Offical Site
XDA Forums
Google+
Twitter
Facebook
IRC(User)
JIRA
Disclaimer
Flash at your OWN Risk
How to Install
Install TWRP
Factory Reset
Format System
Install ROM
Install Google Apps
Install SuperSU
How to Update
Goto SuperSU -> Settings -> Install SuperSU backup script
Goto Settings -> About phone -> System Updates -> Check now
This will download and install latest OTA
DOWNLOAD
TWRP
ROM
Google Apps
SuperSU
Known Issues
Developer Stuff
COMPILE YOURSELF
Github
Gerrit
IRC(Dev)
Changelog​
XDA:DevDB Information
OmniROM, ROM for the Sprint Samsung Galaxy Note II
Contributors
UtkarshGupta, XpLoDWilD, Entropy512, OmniROM Team
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: SPH-L900
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: Nightlies
Created 2014-04-10
Last Updated 2014-12-08

Nice

My name is Skripka and I approve of this. :good:

Excited to try this out. Read up on OmniRom, I am particularly interested in the multi-workspace piece.
I just started working with JIRA at my workplace, I was just thinking today that it would be great for Rom developers.
Sent from my SPH-L900 using Tapatalk

this rom is really awesome; esp with plasma. nice to see it in development thread finally:good:

cmart4 said:
this rom is really awesome; esp with plasma. nice to see it in development thread finally:good:
Click to expand...
Click to collapse
Definitely might have to try this rom. It's either this or Paranoid.. not sure what the difference are Really want to get Plasma going though!

slick_rick said:
...
Known bugs:
- Check sbrissen's CM11 thread...
Click to expand...
Click to collapse
Out of curiosity, I thought that Cyanogen and Omni were separate since CM went commercial..? I thought that some of the CM devs (like Chainfire, XplodedWild, and Dees_Troy) were upset with that and decided to start their own ROM (hence OmniRom)...
Regardless, I'm very excited to see OmniRom has its own page now in our Android Development. It will make it much easier to see how each nightly performs and if there are any bugs that need to be reported.
Additionally, there's a lot of info/support/feature requests/etc here.
Thanks slick_rick!!

altimuh said:
Out of curiosity, I thought that Cyanogen and Omni were separate since CM went commercial..? I thought that some of the CM devs (like Chainfire, XplodedWild, and Dees_Troy) were upset with that and decided to start their own ROM (hence OmniRom)...
Regardless, I'm very excited to see OmniRom has its own page now in our Android Development. It will make it much easier to see how each nightly performs and if there are any bugs that need to be reported.
Additionally, there's a lot of info/support/feature requests/etc here.
Thanks slick_rick!!
Click to expand...
Click to collapse
They are separate for the most part but I am using sbrissens cm11 device tree as a base for omni l900 tree so any bugs there will be here.
Sent from my Nexus 7 using Tapatalk

slick_rick said:
They are separate for the most part but I am using sbrissens cm11 device tree as a base for omni l900 tree so any bugs there will be here.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
On Omni's page they talk about mulitwindow being up to the individual dev who brings it to each device. Is it possible to get that added in the future, or is that going to be up to Omni?
Thanks for the info and thanks for your hard work!!

Thanks for all your hard work and not given up on us like people's. Just downloaded and look forward to trying it out. On a side note I've been spending all my free time in the XDA University forums trying to teach myself how to compile and build. I've got Ubuntu and all the tools but having a 14 month old son n being a single dad in the evenings haven't given me much free time to practice and read.
So i can appreciate all the time and effort you put in to doing this all.

Thank you slick-rick for this great ROM. For me, everything is running flawlessly so far but I have a question. I used Phil's Touch to install the ROM originally and as I mentioned it's running great. This morning I checked for an update and there is a new nightly available. When I went through the process to install the nightly it said that it was only compatible with TWRP. Is this correct, or is it OK to continue with the installation even though I have Phil's Touch? Thank you again for all your work.
Sent from my SPH-L900 using XDA Premium 4 mobile app

davesbest said:
Thank you slick-rick for this great ROM. For me, everything is running flawlessly so far but I have a question. I used Phil's Touch to install the ROM originally and as I mentioned it's running great. This morning I checked for an update and there is a new nightly available. When I went through the process to install the nightly it said that it was only compatible with TWRP. Is this correct, or is it OK to continue with the installation even though I have Phil's Touch? Thank you again for all your work.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Which Nightly did you install? Any nightly build after 1/10 or so should be able to OpenDelta update script via PhilZ/CWM just fine.

Skripka said:
Which Nightly did you install? Any nightly build after 1/10 or so should be able to OpenDelta update script via PhilZ/CWM just fine.
Click to expand...
Click to collapse
I haven't installed a nightly yet. I was waiting to make sure i could do it with phils. Thank you so much for the help. Going to install it now.
Sent from my SPH-L900 using XDA Premium 4 mobile app

Well, that didn't go so good. When I go to system update and do "flash now," it boots to philz recovery but I keep getting "installation aborted" messages. Any ideas?
Thanks. Dave.
Sent from my SPH-L900 using XDA Premium 4 mobile app

SuperSU won't allow me to update binary and tried to use root explorer stated that I didn't have root. ?
Sent from my Transformer TF101 using Tapatalk

Is anyone else getting high Google Services usage? It's the highest usage listed in the battery settings

EGOvoruhk said:
Is anyone else getting high Google Services usage? It's the highest usage listed in the battery settings
Click to expand...
Click to collapse
Check your wakelocks...I saw it and made it go away by changing location to "Device only".

'no service' issue
I had this rom running for a couple of days, then had an issue with an app (xbmc), and decided to go back to macksrom....didn't realize that once you install 4.4.2, you can't go back to 4.1.2...anyway after trying to restore to macksrom failed twice on the data restore, I went ahead and reloaded omnirom, and worked through the xbmc issue....didn't realize until my wife found me at the grocery store that after bringing it back via restore I had no service...and I couldn't find anyway to get service either....
Is this a known issue, or do you know if I did something wrong?
---------- Post added at 07:41 PM ---------- Previous post was at 07:20 PM ----------
hinesw said:
I had this rom running for a couple of days, then had an issue with an app (xbmc), and decided to go back to macksrom....didn't realize that once you install 4.4.2, you can't go back to 4.1.2...anyway after trying to restore to macksrom failed twice on the data restore, I went ahead and reloaded omnirom, and worked through the xbmc issue....didn't realize until my wife found me at the grocery store that after bringing it back via restore I had no service...and I couldn't find anyway to get service either....
Is this a known issue, or do you know if I did something wrong?
Click to expand...
Click to collapse
Just did a complete re-install of the omnirom zip file....seems to be back to normal. Of course, now I have to get all my apps back on and placed the way I like 'em....oh well.

Skripka said:
Check your wakelocks...I saw it and made it go away by changing location to "Device only".
Click to expand...
Click to collapse
Tried this for two days - one mostly on WiFi and one out and about. First day on WiFi I got waaaaaaay better battery, but the second day I got not so good results with Google maps - it took a while to "find my location"....also with location set to 'Device Only', I got high battery use from the weather channel app I have installed, and Dashclock widget can't find my geo location and report.... I think I'll take the slightly higher battery drain with a fully functioning GPS setting.
Thanks for the tip though - it could be super handy for someone mostly on WiFi.

altimuh said:
Tried this for two days - one mostly on WiFi and one out and about. First day on WiFi I got waaaaaaay better battery, but the second day I got not so good results with Google maps - it took a while to "find my location"....also with location set to 'Device Only', I got high battery use from the weather channel app I have installed, and Dashclock widget can't find my geo location and report.... I think I'll take the slightly higher battery drain with a fully functioning GPS setting.
Thanks for the tip though - it could be super handy for someone mostly on WiFi.
Click to expand...
Click to collapse
If you're not traveling, just set DashClock's location manually. Can't vouch for Weather Channel's app, but Weatherbug Elite plays fine with it and doesn't care.
The location pinging with Google Now is insane...and there's no way I know to stop the thousands of location wakelocks short of changing the location preference. Not even changing the app permissions for the location services does any good. And that isn't just an OmniROM issue, but for ever 4.4 ROM I know of.

[4.4] CyanogenMod 11 nightlies

They are released officially und http://download.cyanogenmod.com/?device=n1 :victory:
With the lastest "cm-11-20140126-NIGHTLY-n1.zip" I get no location data - wich makes the N1 unusable for Maps, Foursquare, Ingress aso..
Switches back to "cm-11-20140124-NIGHTLY-n1.zip" everything works fine again.

Flash with stock recovery?
Is there a way to flash a nightly build with the sotck recovery? If not how to change the recovery? Thx

dryll said:
Is there a way to flash a nightly build with the sotck recovery? If not how to change the recovery? Thx
Click to expand...
Click to collapse
You will not be able to flash this with the stock recovery. I imagine once it goes stable CM will push out an official update that will work on the stock recovery setup.
Until then, TWRP works great: http://forum.xda-developers.com/showthread.php?t=2537080

dryll said:
Is there a way to flash a nightly build with the sotck recovery? If not how to change the recovery? Thx
Click to expand...
Click to collapse
I bet I could make that happen. Probably just a reverse of what I do to make it flash in TWRP instead of stock. I bet I could add the first line back in and have it flash properly.

Harfainx said:
I bet I could make that happen. Probably just a reverse of what I do to make it flash in TWRP instead of stock. I bet I could add the first line back in and have it flash properly.
Click to expand...
Click to collapse
Flashify works great for installing TWRP, just backup your stock recovery first, that way you can flash it back before rebooting recovery and flashing colour OS. 27th Nightly is available.

mcteague said:
Flashify works great for installing TWRP, just backup your stock recovery first, that way you can flash it back before rebooting recovery and flashing colour OS. 27th Nightly is available.
Click to expand...
Click to collapse
I meant flash nightlies in stock recovery. I have TWRP on mine, but I bounce back and forth for testing.
Sent from my N1 using Tapatalk

Harfainx said:
I meant flash nightlies in stock recovery. I have TWRP on mine, but I bounce back and forth for testing.
Sent from my N1 using Tapatalk
Click to expand...
Click to collapse
I'm 90% certain stock recovery will not flash nightlies, as it will only flash ZIPs signed with specific signing keys.
Unless CM is signing their nightly ZIPs with the same key as their "official" releases, which is highly unlikely.

Entropy512 said:
I'm 90% certain stock recovery will not flash nightlies, as it will only flash ZIPs signed with specific signing keys.
Unless CM is signing their nightly ZIPs with the same key as their "official" releases, which is highly unlikely.
Click to expand...
Click to collapse
Correct. Currently since they're coming direct from CM as nightlies, they aren't final stable versions. Those will be released like the other two were, and I'm sure will be built to flash in the N1 Stock Recovery.

Location not working
location still not working on latest nightly (130214).
anyone has any idea on how to fix it? the 240114 nightly is not longer on the getCM servers.

Anyone on M6? Thoughts?
I went straight from CM10.2 (CM edition N1) to 11 M6, so I don't know how battery life compares with Omni or other ROMs... would love to hear from those of you that have tried other ROMs and can compare with M6.
With M6, I am getting ~4% battery drain over 7 hours overnight (2G network on only).

All People Update CM. there is the cm-11-20140724-NIGHTLY
First update to the latest nightly in CM page, after that you can update via OTA in your phone, there is Daily updates!!
O-Click, Works, meaby a second lag (while focusing?)
O-Touch Works, not as the touchpad of your lap but works, And for some reason changing the VM to ART works better for me.
3G works
Battery last very good, and its suposed to las more in stand-by if you use ART instead of Dalvik
ART works well by the way.

ThommmF said:
They are released officially und http://download.cyanogenmod.com/?device=n1 :victory:
With the lastest "cm-11-20140126-NIGHTLY-n1.zip" I get no location data - wich makes the N1 unusable for Maps, Foursquare, Ingress aso..
Switches back to "cm-11-20140124-NIGHTLY-n1.zip" everything works fine again.
Click to expand...
Click to collapse
Hi,
I am trying to install Cyanogend mod. N1 a OPPO
The steps are simple, but not working,
I've tried: (http://download.cyanogenmod.com/?device=n1&type=snapshot)
** Cm-11-20140804-SNAPSHOT-M9-n1
cm-11-20140805-NIGHTLY-N1
cm-11-20140124-EXPERIMENTAL-n1.zip
They all show the same error.
"Installation failed"
I downloaded the. zip for wifi, ethernet MAC, WINDOWS ........ and still shows the same error.
:crying:

ThommmF said:
They are released officially und http://download.cyanogenmod.com/?device=n1 :victory:
With the lastest "cm-11-20140126-NIGHTLY-n1.zip" I get no location data - wich makes the N1 unusable for Maps, Foursquare, Ingress aso..
Switches back to "cm-11-20140124-NIGHTLY-n1.zip" everything works fine again.
Click to expand...
Click to collapse
Sorry to bump a 3 year old thread for such an unrelated reason, but you have PMs disabled, and, well, CM11 is not that appealing anymore so I'm confident not many people are gonna read this anyway [any mods reading this, please spare my soul :silly: ]
That said, I just wanted to ask you why you rated my porting of LAOS 15 Trebuchet so poorly, since you didn't leave any comment; if it's some bug, crash or other error i can look into it.
BTW you can answer me on the app's thread if you wish (https://forum.xda-developers.com/android/apps-games/app-lineageos-15-trebuchet-laucher-rom-t3667436)

ThommmF said:
They are released officially und http://download.cyanogenmod.com/?device=n1 :victory:
With the lastest "cm-11-20140126-NIGHTLY-n1.zip" I get no location data - wich makes the N1 unusable for Maps, Foursquare, Ingress aso..
Switches back to "cm-11-20140124-NIGHTLY-n1.zip" everything works fine again.
Click to expand...
Click to collapse
Thank you for leaving your feedback, here are some answers to your points:
- (update mechanism) i actually caught a nasty bug in XDA Labs web console which prevents me from uploading new builds there (and I also deleted all previous reviews in the attempt to reupload the app ??); (i already filed a bug report and managed to get the dev's attention so I hope it gets fixed soon)
- (open source) being a porting, the app mostly shares the original staging/trebuchet15.1 source code, with only a handful edits for fixing crashes due to compatibility errors (and is built with gradle plugin 2.3.3 instead of 3.0.1)
- (very buggy) it inherits all current staging/trebuchet15.1 bugs, not that much from my tests, but yes, there are some

Lenovo IdeaPad A3000-H update (A422_013_025_140624_WW_CALL_FUSE)

Hi, today I've received an OTA update for my IdeaPad A3000-H (3G+WiFi, 16GB).
Old version: A3000_A422_011_022_140127_WW_CALL_FUSE
New OTA version: A3000_A422_013_025_140624_WW_CALL_FUSE
For now, the only thing I noticed was the different boot animation.
I have attached the image of the updated version (The language is set to Italian).
Download old version (140127) from here:
https:*//copy.com/qCjNzpBfyFrRB4hp
and Flash Tool (ver. 3.1336.0.198) from here
https:*//copy.com/fmqX4YR9FphdBAQS
Source: http:*//lenovo-forums.ru/topic/6218-rom-a3000-a422-011-022-140127-ww-call-fuse/
NOTE: remove * from links!

Hi there,
I received the same update today, but after downloading and rebooting, nothing happened, the update simply not installed!
After some useless retries, I used the CWM to install the archive from the folder sdcard0/googleota/ and it did work, for no clear reasons..
The difference so far I notice is only the boot logo ? but I believe there should be other benefits
Sent from my Lenovo A3000-H using XDA Premium 4 mobile app

faissl said:
Hi there,
I received the same update today, but after downloading and rebooting, nothing happened, the update simply not installed!
After some useless retries, I used the CWM to install the archive from the folder sdcard0/googleota/ and it did work, for no clear reasons..
The difference so far I notice is only the boot logo ? but I believe there should be other benefits
Sent from my Lenovo A3000-H using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, its very strange... but its important that you were able to install it!
However, my device isn't rooted and maybe, in your case, CWM has blocked update... (this happened to me on a rooted smartphone!)
With this OTA update, my A3000 seems more stable, with fewer reboots than before (old version: once a day; new version: once a week!)

Plz link of update
Where is the link for the new update

Braveheart850 said:
Where is the link for the new update
Click to expand...
Click to collapse
This new update is only OTA!
To get this OTA update, you must have the "old" version, dated 2014-01-27!
Then search new version, from Android settings (see attached image)!
Here is the link! (remove * )
https:*//copy.com/qCjNzpBfyFrRB4hp

brunix86 said:
Hi, its very strange... but its important that you were able to install it!
However, my device isn't rooted and maybe, in your case, CWM has blocked update... (this happened to me on a rooted smartphone!)
With this OTA update, my A3000 seems more stable, with fewer reboots than before (old version: once a day; new version: once a week!)
Click to expand...
Click to collapse
Strange, this is never happened with my Sony Xperia tipo.. Anyway, you are missing a lot with your mobile not being rooted ?
I noticed the battery life got somewhat longer, there still no way to move apps to the sdcard.
And the Android version still the same ???? #I_want_Kitkat (Heh, don't be silly.. The update was just 3.5Mb or so)
I forget to tell you that it you use my method of CWM upgrade and tried to check for other system updates you will be greeted with the same update install screen! Don't panic, Your system has already been updated.
Fix: just remove/rename the Googleota folder and retry update check, You should be refreshed with calming screen that tells you how you already have the latest version..
Sent from my Lenovo IdeaPad A3000-H using XDA mobile app

faissl said:
Strange, this is never happened with my Sony Xperia tipo.. Anyway, you are missing a lot with your mobile not being rooted ?
I noticed the battery life got somewhat longer, there still no way to move apps to the sdcard.
And the Android version still the same ???? #I_want_Kitkat (Heh, don't be silly.. The update was just 3.5Mb or so)
I forget to tell you that it you use my method of CWM upgrade and tried to check for other system updates you will be greeted with the same update install screen! Don't panic, Your system has already been updated.
Fix: just remove/rename the Googleota folder and retry update check, You should be refreshed with calming screen that tells you how you already have the latest version..
Sent from my Lenovo IdeaPad A3000-H using XDA mobile app
Click to expand...
Click to collapse
You're right! On smartphone I have TWRP, not CWM!
However, for now, I'm fine with the stock firmware (In the future I will evaluate to flash an unofficial ROM)
The battery works two days (over 24 hours, tablet is turned off at night) of normal use (wifi on, 3g on, bluetooth on, several phone calls every day, several app with push notifications).
In addition, 16 GB are so many, while having numerous apps installed (more than smartphone).
In the MicroSD card (the other 16 GB) I'll put my music, pictures and videos made with the camera!
I think it's unlikely that we'll see KitKat on A3000... All I want is find a solution to the problem of BT headset that does not detect anything when I use voice commands or voice recorder!!

The stock rom is just too good to be replaced ? the only feature I really miss is CM theme chooser because I don't like the default white on black theme of the settings' screens.. Sigh, you can't have everything, this device is by far the best I ever had.
Sent from my Lenovo IdeaPad A3000-H using XDA mobile app

update
brunix86 said:
Hi, today I've received an OTA update for my IdeaPad A3000-H (3G+WiFi, 16GB).
Old version: A3000_A422_011_022_140127_WW_CALL_FUSE
New OTA version: A3000_A422_013_025_140624_WW_CALL_FUSE
For now, the only thing I noticed was the different boot animation.
I have attached the image of the updated version (The language is set to Italian).
Download old version (140127) from here:
https:*//copy.com/qCjNzpBfyFrRB4hp
and Flash Tool (ver. 3.1336.0.198) from here
https:*//copy.com/fmqX4YR9FphdBAQS
Source: http:*//lenovo-forums.ru/topic/6218-rom-a3000-a422-011-022-140127-ww-call-fuse/
NOTE: remove * from links!
Click to expand...
Click to collapse
Even though there seems to be no new feature, I noticed that my tablet seems more responsive to touch and the boot animation and boot time have changed. The boot time has considerably come down. Thank you for providing the link and info