Develop Bugs

SetCPU, What are your settings?

Anyone try SetCPU after rooting? I can adjust the min down to 192mhz. Anyone have any idea how safe it is yet as far as sleep of death?
Sorry if this is not in the correct forum

You can test whatever you'd like. I tried it too so just don't check the option for set at boot.
-Hercules composed this post and threw it at your face to be read-

Just worried since it is my alarm clock too, a sleep of death could lead to a sleep of no job

Some believe tegrak is better for samsungs
Sent from my SGH-T989

i believe there was something about needing a custom kernel that supports a cpu oc app. something about it not engaging both cores... just one of them. somebody out there knows more than me about this i'm sure.

I think i remember dsexton702 talkin about needing a kernel for tegrak to function properly
Sent from my SGH-T989 using xda premium

luckyduck69 said:
i believe there was something about needing a custom kernel that supports a cpu oc app. something about it not engaging both cores... just one of them. somebody out there knows more than me about this i'm sure.
Click to expand...
Click to collapse
A custom Kernel is only needed Fri overclocking.
Sent from my SGH-T989 using xda premium

Had mine set on 192 min all night and no issues with waking up so far.

mbernusg said:
Some believe tegrak is better for samsungs
Sent from my SGH-T989
Click to expand...
Click to collapse
Tegrak probably won't work properly if I'm correct set cpu or oc/uv beater should be fine. Tegrak was used for samsung processors. Qualcomm processors are able to scale better at lower or higher frequencies.
---------- Post added at 09:00 AM ---------- Previous post was at 08:55 AM ----------
luckyduck69 said:
i believe there was something about needing a custom kernel that supports a cpu oc app. something about it not engaging both cores... just one of them. somebody out there knows more than me about this i'm sure.
Click to expand...
Click to collapse
It will never engage both cores that is asynchronous. Both processors work independently from each other. This is why you see lag. Both processors are never at their full potential. Qualcomm design the processors for best battery life in mind with good performance. There is a way to get both cores to be synchronized though if it matters to you. But expect worst battery life.

Almost forgot we have a snapdragon lol
Sent from my SGH-T989

Moved to proper forum.

I put mine at 384 min and 1350 max .
Sent from my SGH-T989 using XDA App

mbernusg said:
Almost forgot we have a snapdragon lol
Sent from my SGH-T989
Click to expand...
Click to collapse
The one we have should also overclock very nicely. The APQ8060 is the same one in the Touchpad and that one easily does 1.9Ghz.

When I installed setcpu and had it auto dectect speeds It atuomatically set the min at the max and the min at the highest clock speed. Is that normal? Did anyone else notice that?

hazard99 said:
When I installed setcpu and had it auto dectect speeds It atuomatically set the min at the max and the min at the highest clock speed. Is that normal? Did anyone else notice that?
Click to expand...
Click to collapse
I noticed that too but lowered the min and was able to setup profiles

agrover5279 said:
I noticed that too but lowered the min and was able to setup profiles
Click to expand...
Click to collapse
That's normal. I have noticed the same thing on the g2x and g2. I wouldn't worry about it unless it won't let you change it.
Sent from my SGH-T989 using XDA App

I have mine set @ max 1512 min 384. Temps range from 77-84.
Sent from my SGH-T989 using Tapatalk

I have mine at 192 min and 1512 Max with no issues
Sent from my SGH-T989 using XDA Premium App

Is it currently safe to overclock the phone using this app?

saltmine said:
Is it currently safe to overclock the phone using this app?
Click to expand...
Click to collapse
Yes. But you would need a kernel that supports Overclocking and Undervolting.
Sent from my SGH-T989 using Tapatalk

Cm7 and over clocking

So I have a quick question for people running cm7. I am running cm7 with aveon 6 kernal. I was just wondering what over clock speeds do you guys use?
Sent from my Incredible 2 using XDA App

Dl no frills CPU and test for yoursef, each phone runs defferently and with no frills u can set as boot but if it is not a proper shutdown it will not set just in case it was due to the oc/ UV. Hope this helps and I run 1.5 ghz
Tap'n on miui incredible 2

Plus one on NoFrills. I'm using Aeroevans .7bfs kernel set at 1.2ghz and using the Sio I/O on nightly 133. This works well for me. Good balance of speed and battery life.

bsannes said:
So I have a quick question for people running cm7. I am running cm7 with aveon 6 kernal. I was just wondering what over clock speeds do you guys use?
Sent from my Incredible 2 using XDA App
Click to expand...
Click to collapse
OCing over 1.2 is useless unless you want battery to die fast
Running tiamat 1ghz gives me 30hrs on moderate
1.2 about lil more than a day
Tiamat is supposedly come out with new kernel this weekend or next.
Sent from my Incredible 2 using xda premium

I noticed you can't undervolt with areovans kernal. Or am I just using the wrong app? cause undervolt options don't show in voltage control
Sent from my Incredible 2 using xda premium

tk1o48 said:
I noticed you can't undervolt with areovans kernal. Or am I just using the wrong app? cause undervolt options don't show in voltage control
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
I'm using oc/uv beater app with aerovans. 7 bfs and can undervolt. Which app are you using?

With cm7 I actually like to underclock to around 800 with interactiveX. I have hit 1.9 stable using the smooth ass governor, and when I want to over clock I usually go for 1.2 or 1.4
Sent from my cyancredible 2.

Jeez, guys. Y'all are gonna burn out your processors running at speeds like that.

AgalychnisCallidryas said:
Jeez, guys. Y'all are gonna burn out your processors running at speeds like that.
Click to expand...
Click to collapse
I ran my Eris for over a year at 768. I'm running my inc2 at 1.4 and it never gets hot or anything...actually it runs cooler cause my my processor keeps up with my RAM.
Sent from my Incredible 2 using xda premium

Un1c0de said:
I'm using oc/uv beater app with aerovans. 7 bfs and can undervolt. Which app are you using?
Click to expand...
Click to collapse
Using voltage control free version. I recall on other kernals I was able to undervolt. I can't find that app in the market?
Sent from my Incredible 2 using xda premium

switched to the incredible 2

Hey guys Just got my hands on a dinc2. I'm coming from the evo shift, its great to see 3.5 roms. Looks like the incredible 2 has a strong community, I will contribute as much as possible.
What are you guys have your kernel OC'd to? How much undervolted can she take? Does anyone use tv-out?

hightech316 said:
Hey guys Just got my hands on a dinc2. I'm coming from the evo shift, its great to see 3.5 roms. Looks like the incredible 2 has a strong community, I will contribute as much as possible.
What are you guys have your kernel OC'd to? How much undervolted can she take? Does anyone use tv-out?
Click to expand...
Click to collapse
As far as OC and UV I don't bump it real high, as a matter of fact right now I'm running at 1 ghz (stock speed) if I do OC I'm usually running it at 1.3 ghz.
UV usually a decent is -50 under. Much under that and you could run into freezing up.
I don't remember if TV out works very well with this phone (or at all, I just don't remember lol)
Welcome to this awesome phone.
Sent from my Mikrunny'd Superphone using Forum Runner

I overclock to 1.1 GHz and undervolt -75.
Sent from my HTC_Flyer_P512_NA using xda premium

There is dlna, that's as close to tv out as we can get right now
Sent from my DINC2 in Yuma, AZ

1.3 overclock smartassv2 and 50 mv under
Sent from my ADR6350 using xda premium

I'm really enjoying this phone. I have it OC'd @ 1.2 undervolted 25-50 . Running real strong, and very snappy.
I'm diggn this ext4 touch recovery.
Sent from my ADR6350 using XDA App

hightech316 said:
I'm really enjoying this phone. I have it OC'd @ 1.2 undervolted 25-50 . Running real strong, and very snappy.
I'm diggn this ext4 touch recovery.
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
Touch Recovery is super slick, no way i can go back. Got mine oc'[email protected] and [email protected] across the board, on sense roms i [email protected] across but on these new ICS roms -25 works just fine, I get decent battery life and a fast phone.

dankblaze said:
Touch Recovery is super slick, no way i can go back. Got mine oc'[email protected] and [email protected] across the board, on sense roms i [email protected] across but on these new ICS roms -25 works just fine, I get decent battery life and a fast phone.
Click to expand...
Click to collapse
I was going to get ICS a shot tonight, its an SDK build isn't it?
Sent from my ADR6350 using XDA App

hightech316 said:
I was going to get ICS a shot tonight, its an SDK build isn't it?
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
Cm9 based. Its built from source.
Sent from my Mikrunny'd Superphone using Forum Runner

hell, on CM7 with aeroevan's .7 cfs kerrnel i've gotten a stable 1800mhz overclock with no undervolting...this phone can take a beating

Welcome to the clan my friend

1.8 is a bit extreme. That's not something you won't wanna keep for long periods of time. I heard that can mess things up potentially.
Sent from my Mikrunny'd Superphone using Forum Runner

Ya be weary.. had the original dinc and I fried it.. its not fun at all.. I could only run skyraider and had to have an extremely uv'd kernel for it to just work normal. If I used GPS I had to have my AC on and my phone shoved in the vent or it would restart
Sent from my ADR6350 using xda premium

Zax_Was_Here said:
hell, on CM7 with aeroevan's .7 cfs kerrnel i've gotten a stable 1800mhz overclock with no undervolting...this phone can take a beating
Click to expand...
Click to collapse
Doesn't heat up quick? What's the highest tempature these snap dragons will take before damaging ?
Sent from my ADR6350 using XDA App

Linch89 said:
Welcome to the clan my friend
Click to expand...
Click to collapse
Glad to be here, EVO shift users were mostly rude....
Sorry for dbl post
Sent from my ADR6350 using XDA App

hightech316 said:
Doesn't heat up quick? What's the highest tempature these snap dragons will take before damaging ?
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
Yeah, it got pretty warm, but i was careful to make sure i didnt melt a hole in my back cover xD.
I'm not too sure what the max temp these phones can handle is, i'm just giving an extreme example of what the phone can handle, i wouldnt reccomend more than 1.6, at the highest, 1.4 is fine for daily use

Zax_Was_Here said:
Yeah, it got pretty warm, but i was careful to make sure i didnt melt a hole in my back cover xD.
I'm not too sure what the max temp these phones can handle is, i'm just giving an extreme example of what the phone can handle, i wouldnt reccomend more than 1.6, at the highest, 1.4 is fine for daily use
Click to expand...
Click to collapse
i've seen mine around 125 deg before

Zax_Was_Here said:
hell, on CM7 with aeroevan's .7 cfs kerrnel i've gotten a stable 1800mhz overclock with no undervolting...this phone can take a beating
Click to expand...
Click to collapse
it's always cool to do that just for testing purposes but oc'ing your phone to that level will only fry out your cpu faster as well as kill your battery life. not really necessary to oc this phone above 1.3ghz and if you want to save battery uv between -25 to -50.

I have been running 1.4 for a while now. I uv -25, except the top two voltages I leave stock. Might try -50 eventually. Battery life is pretty beasty with smartassv2
Sent from my mobile typewriter with tapatalk

Oh that reminds me actually, when i oc to 1.8 (or is it 1.9, forgot what aero's kernel maxes at) i CANNOT run it at smartassV2
Locks up for me past 1.5ish every time when i'm on smartassv2, i have to switch to smoothass for the phone to work well
However, i've had no problems with smartassv2 below 1.5, which is why i run it on my phone

Kernel that is only undervolted but not overclocked?

Can someone post a link to a kernel that runs at the stock 1.5ghz but is undervolted? I don't care about performance. Just want the best battery life. Thanks!!
Sent from my SGH-T989 using XDA App

Almost any kernal is better in battery than stock
Sent from my SAMSUNG-SGH-I777

you can easily limit the CPU to not go over 1.5 or even 1.0
when i really want to save battery i keep CPU at 800 Mhz or 1.0 Ghz

Any of the kernels in the development section can be either under bolted or over clocked. I'm using synergy the way it comes out of the box and its great. Standby battery drain is unbelievable.
Sent from my SGH-T989 using xda premium

AllGamer said:
you can easily limit the CPU to not go over 1.5 or even 1.0
when i really want to save battery i keep CPU at 800 Mhz or 1.0 Ghz
Click to expand...
Click to collapse
why dont u UV ur 1.5ghz to 1.0ghz voltage? or near there?

That would be underclocking not under volting
Sent from my SGH-T989 using XDA App

AllGamer said:
you can easily limit the CPU to not go over 1.5 or even 1.0
when i really want to save battery i keep CPU at 800 Mhz or 1.0 Ghz
Click to expand...
Click to collapse
What app do you use?
Sent from my SGH-T989 using XDA App

twolfekc said:
What app do you use?
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
in CM ROMs it's build in
in other ROMs you can use SetCPU or faux or the other one i forgot the name right now

AllGamer said:
in CM ROMs it's build in
in other ROMs you can use SetCPU or faux or the other one i forgot the name right now
Click to expand...
Click to collapse
Thanks a lot man!!!
Sent from my SGH-T989 using XDA App

AllGamer said:
in CM ROMs it's build in
in other ROMs you can use SetCPU or faux or the other one i forgot the name right now
Click to expand...
Click to collapse
Other one = System Tuner
Sent from my Juggernaut SGSII or my "Galaxy Tasked" 10.1

twolfekc said:
That would be underclocking not under volting
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
true, but i find it more effective than UV
yes, we can keep it at 1.5 Ghz with say -0.010v or something like that
it's just a minor hassle to tweak
you can open a Terminal in your phone and launch the command
some apps like the faux can let you control the voltage as well

Overclocking

Y can't the Droid incredible overclock past 1190
Sent from my Incredible using xda premium

The short answer is yes it can but it's not worth it as it's not stable
The long answer is the CPU in the phone isn't really well built to be overclocked from what I've read online. I can't get enough stability with the current voltage max (1375 - which is already 50mV higher than stock and 25mV higher than tiamat). I won't go higher than 1375 and I get nearly instant reboots at the next speed of 1.22ghz. A lot of what I read online suggested 1325 is the max voltage with 1.113 ghz. I have issues above 1.113 ghz myself so I doubt any higher than 1.19 is worth it.
So, if my phone can't run it (probably a lot of phones as well) then I'm not doing it.
Though if you REALLY want higher, Tiamat (AOSP kernel) supports up to about 1.26 ghz but only allows 1350mV max so if you want to try overclocking higher you are welcome to do that. I have a feeling you'd be disappointed though as I don't expect to see stability.

tiny4579 said:
The short answer is yes it can but it's not worth it as it's not stable
The long answer is the CPU in the phone isn't really well built to be overclocked from what I've read online. I can't get enough stability with the current voltage max (1375 - which is already 50mV higher than stock and 25mV higher than tiamat). I won't go higher than 1375 and I get nearly instant reboots at the next speed of 1.22ghz. A lot of what I read online suggested 1325 is the max voltage with 1.113 ghz. I have issues above 1.113 ghz myself so I doubt any higher than 1.19 is worth it.
So, if my phone can't run it (probably a lot of phones as well) then I'm not doing it.
Though if you REALLY want higher, Tiamat (AOSP kernel) supports up to about 1.26 ghz but only allows 1350mV max so if you want to try overclocking higher you are welcome to do that. I have a feeling you'd be disappointed though as I don't expect to see stability.
Click to expand...
Click to collapse
Right wen I overclock to 1.2 I go into bootloops lol
Sent from my Incredible using xda premium

Alton (Halo 2) said:
Right wen I overclock to 1.2 I go into bootloops lol
Sent from my Incredible using xda premium
Click to expand...
Click to collapse
Don't set at boot lol...
Sent from my Galaxy Nexus using Tapatalk

itsme said:
then why do you ask where to get tracelogview, if you mean to ask how to get the cellid?
I think you should pay a bit of attention to what the subject of the thread is. you have 3 different questions of which you mix up the answers in all threads. that makes it kind of difficult to answer.
Click to expand...
Click to collapse
I don't It's just right wen i do it..
It's all over lol
Sent from my Incredible using xda premium

The dx I'm currently on can handle 1.45 undervolted.
Sent from my potted plant running Liberty 3

watt9493 said:
The dx I'm currently on can handle 1.45 undervolted.
Sent from my potted plant running Liberty 3
Click to expand...
Click to collapse
W...t...f...
Sent from my Incredible using xda premium

Alton (Halo 2) said:
W...t...f...
Sent from my Incredible using xda premium
Click to expand...
Click to collapse
Different chipsets. Omap are always good for oc
Sent from my potted plant running Liberty 3