I'm working on a new version of WP7 Root Tools. I have new exploits, that should make it possible to support more devices. I will support Samsungs and HTCs, but I though I would give it a try to support LGs, although it will be very hard without having a hands-on device. But I made a test-app. If you have an unlocked LG with NoDo or RTM (not Mango!), I'd appreciate it if you can run it and post the test-results (in detail!) Hopefully that will help me to build LG support in the next version of WP7 Root Tools.
More info here.
UPDATE: First test was not going well. I improved the tests and added 2 new tests. Please run them again and let me know the results in detail!
UPDATE: Third version of the test-app...
UPDATE: Fourth version of the test-app...
UPDATE: Fifth version of the test-app...
UPDATE: Sixth version of the test-app...
UPDATE: Seventh version of the test-app...
UPDATE: Version 8 of the test app is now uploaded. There is a slight risk involved that it screws up. So make sure you make a backup in advance! You can find a backup app here. Follow the on-screen-instructions: Run the tests. Write down the results in detail. Then reboot (there's a reboot-button). After the reboot start the app again and run the tests again. Write down the results again. Please report the results of both test-runs.
UPDATE: Previous test went well. Also the risky part seems to be no problem anymore. Almost certain now that I can support LG devices in WP7 Root Tools. But I need more details. So here's version 9 of the test app. I hope this will provide all the info I need. But it could be possible that the results of this test app raise more questions. In that case I might need to create another test app. Anyway, I hope this is going to be the last version of the test app. It will perform 20 (!) tests. Please run the tests twice. After the first run, write down the results, reboot, run again and write down the results again. Report the results in full detail. I expect that some of the tests fail or throw errors. That's no problem. I just need some confirmations and details for implementation.
UPDATE: Test app v10. Please test it. You know the drill. Test, reboot, test again.
UPDATE: We're still not there yet. Test app v11 now. Please test it. Like before, test it twice.
UPDATE: Unfortunately the last tests were not successful. For now I'm out of ideas to get this working on LG's. I'm very close, but I can't get the last part to work. I will leave it to rest now. Chances are that when I'm working on other things I might get ideas to continue the work for LG's. So I don't write this off yet. Too much effort already put into this by me and everybody who helped me testing. Thanks to everyone so far and I hope to get new inspiration for this soon.
UPDATE: I think I got some great news. I have just found 2 new hacks that can probably be used for LG. I think both will work. And I need only one of them to work to get WP7 Root Tools working for LG's! All the previous testing has not been wasted, because I will use a combination of exploits, including the ones I already found and tested with you. I will have to test if this all works, how it works and how it is best implemented. So expect another round of test apps soon! It may take some research first before I can make a new test app and I'm also working very hard on a couple of other things, but I think you can expect a new version of the test app before the end of the week. I'm glad it seems this has not been a waste of time and energy!
UPDATE: Test app v12 is ready for testing. No need to run it twice. Please let me know the results.
UPDATE: Test app v13 is ready for testing.
UPDATE: Test app v14 is ready for testing.
UPDATE: Test app v15 is ready for testing.
UPDATE: Test app v16 is ready for testing.
UPDATE: Test app v17 is ready for testing. I optimized some of the other tests. They might fail where they passed before. I that case I will have to revert. I hope test 6 and 12 will pass now.
UPDATE: Test app v18 is ready for testing. I got a good feeling...
UPDATE: Ok Guys. Thanks a lot for testing. I have enough info to build support for LG devices in the next version of WP7 Root Tools. As I wrote earlier, I'm finishing up a lot of code. All test code is there, just need to glue it all together. Not sure how long it will take me, but it will be a very cool release. So bear with me.
Will keep you posted!
Heathcliff74
I must say I'm a bit disappointed. No interest from LG users. Guess there won't be support for LG devices then...
I'd help, but I'm already on Mango. But I bet there are interested users, give them a fair chance to actually test and post. Under 24 hours might not be enough.
\J
Version: 7392
Test 1: error: The handle is invalid
Test 2: fail
Test 3: 0
Test 4: 0
Test 5: 0x0000000
Now, there is an update for Zune, will try it once more after that update
EDIT: After Zune update are the results the same
Hope i can help you more
ziko said:
Version: 7392
Test 1: error: The handle is invalid
Test 2: fail
Test 3: 0
Test 4: 0
Test 5: 0x0000000
Now, there is an update for Zune, will try it once more after that update
Click to expand...
Click to collapse
Thanks. This didn't work yet. Do you have an email address where I can reach as soon as I have more tests? Since there are not that much LG users, it's easier if I can reach you directly. If you want you can PM me your email-address.
You can try the update, but I don't think it will help. I will probably have to find out what I have to change to my code.
Thanks again,
Heathcliff74
jontatas said:
I'd help, but I'm already on Mango. But I bet there are interested users, give them a fair chance to actually test and post. Under 24 hours might not be enough.
\J
Click to expand...
Click to collapse
Guess you were right
yea finnaly some LG love But Sadly im on 7712 already .. maybe I'm gonna downgrade just to check this out
jontatas said:
I'd help, but I'm already on Mango. But I bet there are interested users, give them a fair chance to actually test and post. Under 24 hours might not be enough.
\J
Click to expand...
Click to collapse
I'm betting there's lots of people in the Mango camp. Myself included.
First test was not going well. I improved the tests and added 2 new tests. Please run them again and let me know the results in detail! Download is in the opening post.
Thanks!
Heathcliff74
lg test 2 results:
Test 1: error:a device attached to the system is not....(end of screen, cant reed the rest)
Test 2: Fail
Test 3: 0
Test 4: 0
Test 5: 0x00000000
Test 6: Pass
Test 7: error: The handle is invalid
ziko said:
lg test 2 results:
Test 1: error:a device attached to the system is not....(end of screen, cant reed the rest)
Test 2: Fail
Test 3: 0
Test 4: 0
Test 5: 0x00000000
Test 6: Pass
Test 7: error: The handle is invalid
Click to expand...
Click to collapse
Thanks. A little step further. But the essential tests are still failing. I will have a look, create a third version and post it here later.
Ciao,
Heathcliff74
thaks for supporting lg devices for your homebrew
will help as much as i can
Hi,
I have LG E900 with NoDo (unlocked 7.0.7392.0). Today (after 4-5 hours) I will try test.
Version 3 of test-app now. Please try again! Thanks!
Heathcliff74
lg test 3 results:
Curios, it says "Performing 7 Tests" but there are only 5....hhmmm
The results are the same as with Test v1.
Please have a look on the XAP.
Test 1: error:a device attached to the system is not....(end of screen, cant reed the rest)
Test 2: Fail
Test 3: 0
Test 4: 0
Test 5: 0x00000000
Click to expand...
Click to collapse
ziko said:
lg test 3 results:
Curios, it says "Performing 7 Tests" but there are only 5....hhmmm
The results are the same as with Test v1.
Please have a look on the XAP.
Click to expand...
Click to collapse
Hi ziko,
This app has 5 tests. The 7 is a typo. Could you please try to turn off your phone completely and then power on and then try the test again? Thanks.
Sent from my OMNIA7 using XDA Windows Phone 7 App
Hi Heathcliff74,
Unistaled the app
removed battery
started again
installed the V3 again
...sorry, the results are the same as above...
7.0.7392
Test 1: error: A device attached to the system is not ...
Test 2: Fail
Test 3: 0
Test 4: 0
Test 5: 0x00000000
Same how fb401:
Test 1: error: A device attached to the system is not ...
Test 2: Fail
Test 3: 0
Test 4: 0
Test 5: 0x00000000
i'm not at home this weekend but i will try it on Monday on my Optimus 7.
Thanks for suppporting LG Phones.
Related
Since I got many PMs asking for the kitchen I used to cook my ROMs, I've made my decision to upload it here.
Well, the source is not completely mine, but it's also modified from KaiserKitchen and tools from many others.
I've checked it and modified it again today to make it as easy to use as I'd like it to be.
You can modified it to suit your own but remember to learn the process first.
So here it is.
The download link is here
Enjoy.
Regards,
Cyphol.
Thanks for sharing.
^.^
I'm looking forward to testing it.
It's a simple kitchen only.
You have a few repeating points in the cleaning process.
You could make :clean
del, attrib and rd procs.
AFTER it insert a set /p choice
where choice 8: ends with goto 1a, or choice 9, goto 1b.
I'm thinking about replacing the ervius package manager with buildos+package_tool
What do you think about that?
I'm also thinking about adding a rgucomp registry conversion section.
adwinp said:
You have a few repeating points in the cleaning process.
You could make :clean
del, attrib and rd procs.
AFTER it insert a set /p choice
where choice 8: ends with goto 1a, or choice 9, goto 1b.
I'm thinking about replacing the ervius package manager with buildos+package_tool
What do you think about that?
Click to expand...
Click to collapse
Yeah! I know but I did it on purpose. That's how to help other newbies understand the process of cooking. I have another one, clean but complexed,not to be publicize since it's not good for learning purposes. It also mean that your're not that noob.
Well, I think I still am.
^.^
I'm more of a linux user but I still remember basic windows batch syntax.
I only started learning about cooking etc not so long ago (htc cooking; what I did in the past was SE modding).
Still have a long road left ahead of me, but I'm a fast learner.
Anyways, you're right about the kitchen.
Experienced chefs will tend to have their own.
Do you think it's a good idea to add "pause" among critical sections?
Just to have time to check if everything's ok and ready to proceed with the cooking.
1 failed step and you have to analyze what and WHERE it went wrong.
But for example:
echo "Extracting imgfs content complete."
pause
--- continue script
adwinp said:
Do you think it's a good idea to add "pause" among critical sections?
Just to have time to check if everything's ok and ready to proceed with the cooking.
1 failed step and you have to analyze what and WHERE it went wrong.
But for example:
echo "Extracting imgfs content complete."
pause
--- continue script
Click to expand...
Click to collapse
Yeah! You're right. I give you permission to alter the batch file and upload again as yours. So, it will help many newbies understanding the process more and trap the errors before hand.
So, how are you doing with Raphael's ROM. My first impression of it is not that good since it's not for release purpose but it's running pretty good on mine. The release one will surely better than ours here.
The first repack I did worked lke a charm (apart from the internal storage driver issue), though I didn't really have the time to play extensively with it; it was only to check the hardware compatibility, speed and structure.
It really looks like a pre-release.
Like I wrote in one of my previous posts, I'm gonna TRY making a hybrid Raph+diam, though I don't know if it's worth the time investment.
Like most ppl in here, I have a private life apart from playing with tech.
Gotta find myself a doctorate. I just defended my thesis last Monday.
^.^
cyphol said:
Since I got many PMs asking for the kitchen I used to cook my ROMs, I've made my decision to upload it here.
Well, the source is not completely mine, but it's also modified from KaiserKitchen and tools from many others.
I've checked it and modified it again today to make it as easy to use as I'd like it to be.
You can modified it to suit your own but remember to learn the process first.
So here it is.
The download link is here
Enjoy.
Regards,
Cyphol.
Click to expand...
Click to collapse
Nice Release BRO, SORRY FOR this late reply but beeeen busy, if you need help let me know
Many thanks for sharing! I would like to work around a new Italian ROM and it's a great source for starting!
I have yet another suggestion:
Add another option:
ROM dumping.
with lets say option
8a: list partitions
8b: save partitions
Of course, everyone wil have to input their own partition offsets (Implement something similar to read -p)
This thread will be used for the development of my 6.5 rom for the 700wx.
Let the cooking begin!
Update 6-5-2009:
I'm going to be on vacation for the next week. Please watch for new posts to this thread in case joojoobee666 makes some more progress on our little display driver issue.
Update 6-3-2009:
joojoobee666 said:
Ok guys, here's the scoop. After many...MANY failed ROM's, a bricked phone brought back to life (thanks to NightRaven's awesome knowledge of the 700wx for saving my test phone), lot's of tears and cries of anguish there is still no working ROM, but we have made some progress.
Click to expand...
Click to collapse
joojoobee666 said:
We finally got confirmation today that the hang on boot is being caused by the OEM ddi.dll display driver. We have tried all the ddi.dll we could find in the publicly available Carrier sanctioned ROMs, but no matter which one we use, gwes.exe hangs on boot. Today we managed to procure a copy of ddi_nop.dll (it's basically a dummy display driver) and used it in place of ddi.dll. Windows Mobile 6.5 did indeed boot, but at the cost of no display. Since there is no display, we are unable to tell what else may be wrong.
So, this is an update and a call out to anyone who is willing to help. We are looking for anyone who can:
a.) offer a ddi.dll from any Intel PXA27x based device, and preferably a msm6500 chipset as well
b.) has a NEWER 700w/700wx ddi.dll than the Sprint 1.15 ROM or VZW 1.24 ROM
c.) has the skills to debug the one we have and figure out why it hangs any gwes.exe above 20273.
I'm sure once we get past this part there will be other bugs to work out, but one hurdle down is better than the none.
Finally...PROGRESS!
Click to expand...
Click to collapse
Reserved for future use...
Reserved for future use...
NightRaven said:
This thread will be used for the development of my 6.5 rom for the 700wx. I am going to start by building a working emulator image, and then port it to the 700wx. I am hoping this will help me work though the issues I'm running into with the build.
Let the cooking begin!
Click to expand...
Click to collapse
do you have it somewhat working yet?
what are the features?
See first post for updates.
NightRaven said:
This thread will be used for the development of my 6.5 rom for the 700wx. I am going to start by building a working emulator image, and then port it to the 700wx. I am hoping this will help me work though the issues I'm running into with the build.
Let the cooking begin!
Update: The emulator image is almost complete. There are issues with file attributes which are causing some problems. Right now, you are unable to change the theme, delete files, or change network settings. These are the same issue I ran into on the 6.1 rom. It should only take a few days to work through the issue. I'll post what I have finished so far.
Download - WM 6.5 Emulator Image
Click to expand...
Click to collapse
I am rooting HARD for you.
I've installed SPB Mobile Shell 3.0 and 2.1 for my nephew as an eye candy but they have been buggy to say the least.
I've been using the WM6.5 on my Touch Pro and my nephew really wants it in his phone.
If you can get 6.5 to work on my nephew's Treo 700wx, it will be like having a new phone all over again!
I can't wait until it is released. ETA on the release???
Waiting so patiently ...................fingers crossed that NR can make it work ...
Treo911 said:
Waiting so patiently ...................fingers crossed that NR can make it work ...
Click to expand...
Click to collapse
Yup, I've been a lurker for the longest time, and my first post was in anticipation for this 6.5 rom. Go NR!
So hows the cooking going NR..................I have been looking at 6.5 ...and it looks great ...ya think you can get it running on the 700 wx?????
Is it possible to make the WM6.5 version have two versions? one with activesync (normal one), and one with activesync REMOVED? because the KeepAlive hack doesn't work .. I am having it conflict with the USB modem and the ##DIAG port.
Also does the WM6.5 IE 6.1 (I think) fix the graphics corruption issues when scrolling webpages with the stylus?
TIA
any update on the 6.5 for the wx ?? waiting patiently
Waiting in line also ........
waiting...
The line is getting long.... Go NR!!!
Did this thread die out......or was there a fire in the kitchen.....LOL....Hoping NR ..is doing his thing.......
Treo911 said:
Did this thread die out......or was there a fire in the kitchen.....LOL....Hoping NR ..is doing his thing.......
Click to expand...
Click to collapse
I am currently wait for the RTM release of 6.5.
thanks for the update NR.......will be keeping a close eye on this thread for sure......ya think you can get it to work on the 700 wx?
Treo911 said:
thanks for the update NR.......will be keeping a close eye on this thread for sure......ya think you can get it to work on the 700 wx?
Click to expand...
Click to collapse
I don't see why it wouldn't work. The 700wx seems to have enough rom and ram. However, I am still having trouble getting it to boot. I need to find a solid XIP. The search continues...
Anyone else here know how to cook a rom? I need more people to help with this project. I am still having trouble getting 6.5 to boot on the 700wx. It is still hanging on the welcome screen. I know the SYS and XIP are good, so I'm leaning towards it being an incompatability in the OEM.
If anyone want's to help, I'll post my kitchen as it is so far. If you can help, PM me...
See first post for updates....
bump for another update considering the success over at the Treo 750
Hello everyone,
I am happy to inform all those folks who waited for a full Linux operating system on the HTC Kaiser PDA that today a little bit modified version of Zubuntu finally booted successfully on my HTC Kaiser.
It is a really in the alpha-state but it works, let's see what do we have:
TouchScreen: works perfectly with calibration
Screen: looks good. but programs doesn't support Kaiser's small resolution. You can fix this by using INTERPOLATION, but this makes picture quality a lot worse. To try it out edit the default.txt, find the mddi.height and mddi.weight values and change to for example 480 and 360.
Keyboard: works exactly as expected, some fine tuning with the keyboard map will be done
ScreenRotating
Not tested/not working:
WiFi (MY #1 ISSUE, TRYING TO FIX): I extracted the wifi section from an Android rootfs, successfully modprobed wlan.ko, dmesg shows that the driver is loaded OK, but:
Code:
iwconfig
tiwlan0: no wireless extensions
ifconfig tiwlan0 up
ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address
TI's WLAN_LOADER program didn't work either, so now I am moving to the other driver (wl12xx)
Bluetooth (Driver is there, no BT programs installed, couldn't test it)
3G
Cameras
Phone (NO dialer, nothing, however perhaps gsm-libs can help us firing it up)
Many many thanks goes for all these people form the #htc-linux IRC channel: randomblame, Markinus, ali1234, Ondalf and bombenbach for their outstanding support and help!
I would like to say thank you especially to phh for his awesome help and patience with me!
Click on the image for more pictures!
Stay tuned for: hopefully working WiFi, screnshots, YouTube-demonstration.
If you are interested, want to say thank you, want to help, or have an idea how to fix some things please write into this topic.
Also if you like my work, please consider a little a donation for me
After all, I am pretty sure now you want to try this on your own too, so here is the link for the Google-Code website. Download all the files and read the Wiki to know what to do.
http://code.google.com/p/kaiser-buntu/http://code.google.com/p/kaiser-buntu/
Link to RootFS:
http://www.megaupload.com/?d=ANRC94ON
Mirror (thanks to jmcbrother):
http://rapidshare.com/files/371631240/ubuntu_rootfs.rar
Mirror #2 (thanks to hoatienii):
http://www.mediafire.com/?uvytadoykyy
Want to be updated? Check out the project's Twitter page!
http://www.twitter.com/kaiserbuntu
Thank you,
DOMy
RESERVED for future additions
Reserved for future additions
great work . please upload link to test
Sweet that is great news! I can't wait to try it out!
Me wants the alfa link
This is so great!
Maybe we can find a solution at my hackersspace.
Great Work... Luv Linux.... Ported Android on Windows Mobile Device... Eager to port Ubuntu on Kaiser...
can you please share the Linux Beta link ...
Makes me almost wanna install Ubuntu on my PC.
Dukenukemx said:
Makes me almost wanna install Ubuntu on my PC.
Click to expand...
Click to collapse
me 2
oh……thank you……I wanna test……wait ……
Would it be destructive to flash it to nand at this point in the project?
I wouldn't count on it even remotely fitting on the NAND. Besides, you'll probably have to have half the apps on an SD card anyway...
how about a build that will work with the new nomorootfs installers so hose of us like me can try it without going back to winmo, Would like to install to ext2.img files or sdcard partitions.
And is this remotely close to the MER Linux build that progress seems to be halted on I was able to get it to work
working XWindow?
I wouldn't recommend installing it to NAND (it doesn't work so good, for example I didn't have time to test power/suspend).
Xwindows works perfectly (except the resolution issue).
DOMy
resolution issue. can you please explain that? (whats wrong in resolution) before i flash back to ,WM and try it
Michga said:
resolution issue. can you please explain that? (whats wrong in resolution) before i flash back to ,WM and try it
Click to expand...
Click to collapse
The problem is that the rootfs is not for the Kaiser and the Xserver uses some hardcoded resolution (that means there is no config file for it) so circa half of the windows are too big for the screen. It is not a big problem because you can move them around so it is easy to get to one of the corners and resize them so you can see the whole thing at once.
Fixing this is on my To-Do list
sorry for the dumb question but...
will this support phone???
no mention in the OP.
I assume no. (for now anyway)
mnjm9b said:
sorry for the dumb question but...
will this support phone???
no mention in the OP.
I assume no. (for now anyway)
Click to expand...
Click to collapse
Driver support is there, but AFAIK no frontend yet.
DOMy
mod: I found this: http://packages.ubuntu.com/hardy/comm/gsm-utils and this http://manpages.ubuntu.com/manpages/gutsy/man8/gsmctl.8.html perhaps I will try it later (or someone can try it and report)
This intrigues me muchly, but why ubuntu/debian based?
There are other, (and imho simpler), bases to build on, slackware springs to mind, and there are some tiny distros out there, which may also be worth looking at, to say nothing of the likes of Familiar, an interesting candidate for a non-android htc-linux.
I'm working on HTC support for WP7 Root Tools. I made a test-app. If you have an unlocked HTC with NoDo, I'd appreciate it if you can run it and post the test-results.
UPDATE: Very useful test results!! (see my comments in post #4) Updated test app attached. Please run this test and let me know the results (in detail).
More info here and here.
Thanks a lot!
Heathcliff74
T-Mobile HD7 Nodo 7392
Test 1: error: Incorrect function
Test 2: error: Incorrect function
Test 3: Pass
Test 4: error: Incorrect function
Test 5: error: Incorrect function
Test 6: error: Incorrect function
Test 7: error: Incorrect function
Test 8: Pass
Test 9: Pass
HD7 Nodo 7392
Test 1: error: Incorrect function
Test 2: error: Incorrect function
Test 3: Pass
Test 4: error: Incorrect function
Test 5: error: Incorrect function
Test 6: error: Incorrect function
Test 7: error: Incorrect function
Test 8: Fail
Test 9: Pass
OK guys. Very useful info. Looks like a lot of errors, but this is actually a very good result! Test 3 was the most important one and that one passed. This actually confirms I can make WP7 Root Tools compatible with HTC devices!!
I would like to have some more details, so I made a second test app. If you have an HTC with RTM or NoDo, please download the second version of the test-app (in the opening post of this thread) and run it. This will provide me info that I can use for optimal implementation. Please let me know all the details on screen and the version and device model you use.
Thanks very much!!
Heathcliff74
Heathcliff74 said:
.If you have an HTC with RTM or NoDo, please download the second version of the test-app (in the opening post of this thread) and run it. This will provide me info that I can use for optimal implementation. Please let me know all the details on screen and the version and device model you use.
Click to expand...
Click to collapse
Hi Heathcliff74!
nice to see that we can support you.
will trying to thest the tool as soon as I'm back from work.
Do you prefer testing on NoDo or Mango?
btw I can test it on each subversion (Mango betaversion) when I update my phone
EDIT:
European HD7 ==> PD291000
Cotulas HSPL
Fresh flashed Ansars WWE 3.04 Rom (7.0.7390.0) and deinstalled all unecessarry htc stuff
7390:
Test 1: Pass
Test 2: Pass
Test 3: 3
Test 4: 5
Test 5: 0x0000007E
7403:
Test 1: Pass
Test 2: Pass
Test 3: 5
Test 4: 5
Test 5: 0x0000007E
cant't update any further :-(
flash ansars 1.69 rom (7.0.7389.0) & 5.66a radio
7389 & 7403:
Test 1: Pass
Test 2: Pass
Test 3: 3
Test 4: 5
Test 5: 0x0000007E
7712 & 7720
The type initializer for ÄY threw an exeption...
HD7 Nodo 7392, O2 Sim
Test 1: Pass
Test 2: Pass
Test 3: 3
Test 4: 5
Test 5: 0x0000007E
Edit: looked up your DLL in IDA, some nice stuff is coming really looking forward to how you managed to circumvented the chamber model!
HD7 Nodo 7392
Test 1: Pass
Test 2: Pass
Test 3: 3
Test 4: 5
Test 5: 0x0000007E
OK guys! Thanks very much. I know enough to support HTC now. Very cool. I will keep you posted on the progress in the WP7 Root Tools thread.
Thanks again!
Heathcliff74
PS. HTC really need to hire some decent coders for their drivers
rudelm said:
Edit: looked up your DLL in IDA, some nice stuff is coming really looking forward to how you managed to circumvented the chamber model!
Click to expand...
Click to collapse
Heheh... I have put a lot of nice stuff in WP7Native01ARM.dll. But my native code-base is a lot bigger right now! I have done a ton of research and I build a lot of abstraction layers to make all this possible. Most of the REAL magic will be in WP7Native02ARM.dll And there's also WP7Native03ARM.dll. These will be in the new version of WP7 Root Tools. So, when it is released, you should open up IDA again
About the chamber model.. I've been studying it over the past weeks. It is really cool, when you start to understand it. If I'd had to guess I'd say that I completely understand 80% of all the implementation details of the policy-system. I almost completely reverse engineered and re-engineered the policy-engine
Ciao,
Heathcliff74
wowowowww Nice m8...
We will Wait for this...Thanks for hard work
Over the past few days, I have been working on a new version of Seven-Eighter based off of the source code that Jaxbot kindly provided. I have made numerous improvements to the original version.
One of those improvements is instead of embedding the links to the update files as strings in the actual program, my version of Seven-Eighter downloads a config file from the internet which contains the links to the update files. In this manner, you, the user, do not have to download a new version of the program every time Microsoft releases a new update for Windows Phone 7.x. All I have to do on my end when a new update comes out is to just update the config file once I find links for the new update.
Some more improvements include improved error handling and some better instruction to help you with the update process. If you haven't yet, you should really check it out. I am curious as to what people think of my version compared to the original.
You can find the link to download my version of Seven-Eighter on my blog here: http://bit.ly/ZOzAz9
Now as such, I am always looking to improve. I welcome any and all suggestions. If you want to throw something my way to help with development you are welcome to do so, but not required (your satisfaction works just as well, check my signature for instructions).
Nice work!
Steven855 said:
Over the past few days, I have been working on a new version of Seven-Eighter based off of the source code that Jaxbot kindly provided. I have made numerous improvements to the original version.
One of those improvements is instead of embedding the links to the update files as strings in the actual program, my version of Seven-Eighter downloads a config file from the internet which contains the links to the update files. In this manner, you, the user, do not have to download a new version of the program every time Microsoft releases a new update for Windows Phone 7.x. All I have to do on my end when a new update comes out is to just update the config file once I find links for the new update.
Some more improvements include improved error handling and some better instruction to help you with the update process. If you haven't yet, you should really check it out. I am curious as to what people think of my version compared to the original.
You can find the link to download my version of Seven-Eighter on my blog here: http://bit.ly/ZOzAz9
Now as such, I am always looking to improve. I welcome any and all suggestions. If you want to throw something my way to help with development you are welcome to do so, but not required (your satisfaction works just as well, check my signature for instructions).
Click to expand...
Click to collapse
hi, for htc mozart with dynamic v2.0 rom doesn't work.
Do you know how I can update my phone?
Thanks
ruso said:
hi, for htc mozart with dynamic v2.0 rom doesn't work.
Do you know how I can update my phone?
Thanks
Click to expand...
Click to collapse
To be honest, I didn't test my version of Seven-Eighter with a custom rom image (only stock factory rom image). What build is it currently running?
I have the exact same question.
I pretty much bricked by bootlaoder on my AT&T HD7S using the initial version of SevenEighter from jaxbot and now can't even use the gold card method to downgrade since I need it unlocked.
My RGB bootloader screen only shows one line of text at the top in the red and nothing in the white space where it should say USB HOST/Loader Mode.
But at least I had a 7.5 Zune backup that I can restore to, the only thing being that it doesn't restore my bootloader.
So, question is, can I use your software to upgrade to a custom unlocked 7.8?
Thank you!
I was finally able to get my Focus S upgraded to 7.8. Got tired of waiting. I had a problem with the application and had to close it. when I relaunched, it continues where it left off. Nice! I left the update.log just in case.
Now I just need to unlock it for side loading. Anyone recommend ways that still work? Thanks.
Will
Steven855 said:
Over the past few days, I have been working on a new version of Seven-Eighter based off of the source code that Jaxbot kindly provided. I have made numerous improvements to the original version.
...
You can find the link to download my version of Seven-Eighter on my blog here: http://bit.ly/ZOzAz9
Now as such, I am always looking to improve. I welcome any and all suggestions. If you want to throw something my way to help with development you are welcome to do so, but not required (your satisfaction works just as well, check my signature for instructions).
Click to expand...
Click to collapse
Screenshot please ?
anybody updated at&t titan 2 to 7.8?
Yes. The seveneighter app worked perfectly. I just wish I could install the version of htc connection setup I had on my hd2 so I could change my apn settings for my carrier instead of being locked out of my mms.