Hey I am new to all this so I may get the terminology wrong so be kind.
I just recently bought the r800a variant of this phone from gsmnation and it seems as though this is the rodgers version. It came with heaps of rodgers bloat ware. I am in Australia and the reason I bought it was to work on Telstras 3g network and from the information on gsmnation the r800a is the only one to work with there network, the r800i will not. I believe it is the 850 band for 3g.
http://www.gsmnation.com/sony-ericcson-xperia-play-r800a-nam.html
Now when i was creating this post it showed me this thread
http://forum.xda-developers.com/showthread.php?t=1122643
Which my interpretation is that i can put on a generic rom like the one is this thread http://forum.xda-developers.co/showthread.php?t=1043630
And then all I would need to do is change the apn settings (no idea what this is, and they dont tell me how to do this) and the 3g will work.
My question is, can I put a r800i generic rom (as i cant find a generic r800a rom) and have Telstra 3g work on my phone? This is really doing my head in. I really want all this rodgers stuff gone and I hear the gereric rom gets a 25sec boot time and doesn't have the rodgers boot screen or all the crap.
P.S I was also reading that the rodgers bootloader is locked, is this a problem
hey
im on telstra, but i bought a new telstra handset off ebay for $445(since they can have unlocked bootloaders) all you need to do is flash the world generic and then in settings in the sony ericsson tab click internet settings and boom, it will work, i havent had to manually configure telstras apns at all since ive had the phone.
Mael5trom said:
hey
im on telstra, but i bought a new telstra handset off ebay for $445(since they can have unlocked bootloaders) all you need to do is flash the world generic and then in settings in the sony ericsson tab click internet settings and boom, it will work, i havent had to manually configure telstras apns at all since ive had the phone.
Click to expand...
Click to collapse
So just by clicking on the settings tab -> Internet settings it will automatically change the r800i rom to work with the 850 gsm of telstra?
from what im told flashing the generic firmware doesnt actually flash the phones radio, and the phone just uses it as normal, apns are handled the same way regardless of the carrier, so all the phone does is look for the settings to connect to telstras data network and then it works, ur phone will still say its an r800i but it works fine, dont worry about that.
Yep totally fine to flash generic r800i firmware and still access all telstra's network and remove all Roger's bloat. For APNs, if it doesn't automatically set it up, just go to http://configure.telstra.com.au/telstra/index.jsp and follow the prompts.
Has for me, Ive flashed fresh firmware about 5 timeson this phone and never has to do anything more than click internet settings, data connection pops up within several seconds and its good to go, can always use apns manually if you want though.
Thank you all for your responses!!! I will give it a shot tonight and let you know how I fair. Thanks again!
OK so i think i am doing something seriously wrong.
I am trying to get the bootloader unlocked following this guide
http://forum.xda-developers.com/showthread.php?t=1034087
for starters I don't know how to install the drivers, its just a rar archive and when i extract it there is no read me. any help here would be most appreciated.
Also I can't get into fastboot mode. When its off i hold down the search button and connect the cable and a green led comes on not a blue one. I tried the trick with taking out the battery, nothing has worked. I then read a few post saying some phones you cant get into fastboot mode, cause they are sim locked. But my phone is not sim locked as its working with a telstra(australia) sim and it a rodgers(Canada) phone. Or does sim lock mean something different? Please can some one help. I will donate as i am running out of hair to pull out!
You don't need to unlock your bootloader at all! Just use flashtool with the UK generic ftf
1. Grab the firmware FTF file from here-> http://www.multiupload.com/MDS10FFGTT
2. Get the flashtool (credits to Androxhyde and Bin4ry) from here-> http://www.multiupload.com/7H4JT35B6G
3. Name a folder "flashtool" on your desktop, then extract the flashtool's files to it.
4. Extract the FTF file, and put it in desktop/flashtool/firmwares
5. Run X10Flashtool.exe, press the "flash" button, and select the UK generic firmware. Press OK.
6. Follow the instructions on the screen, and you're done.
Go here if you want to root it and update it afterwards-> http://forum.xda-developers.com/showthread.php?t=1116090
thanks you very much for your response I will try that tonight!
captain67 said:
You don't need to unlock your bootloader at all! Just use flashtool with the UK generic ftf
1. Grab the firmware FTF file from here-> http://www.multiupload.com/MDS10FFGTT
2. Get the flashtool (credits to Androxhyde and Bin4ry) from here-> http://www.multiupload.com/7H4JT35B6G
3. Name a folder "flashtool" on your desktop, then extract the flashtool's files to it.
4. Extract the FTF file, and put it in desktop/flashtool/firmwares
5. Run X10Flashtool.exe, press the "flash" button, and select the UK generic firmware. Press OK.
6. Follow the instructions on the screen, and you're done.
Go here if you want to root it and update it afterwards-> http://forum.xda-developers.com/showthread.php?t=1116090
Click to expand...
Click to collapse
OK so I grab the firmware FTF file.
I grab the flashtool and extracted it to flashtool on my desktop
I extracted the ftf file to the /flashtool/firmwares
this is where it got hard
I ran the X10Flashtool.exe, and it asked me to select my phone, play wasn't on the list so I selected x10.
I clicked flash and selected the firmware and then it told me to connect my phone. My phone was off and I held the search button down and plugged in the usb cable(i kept holding the search button down untill the charinging logo appeared on screen). And nothing happened.
This is seriously doing my head in!!!
You need to hold down the back button, not the search one.
Sent from my R800
captain67 said:
You need to hold down the back button, not the search one.
Sent from my R800
Click to expand...
Click to collapse
Dont I look stupid. I just assumed it was the search one from the other threads about other xerpias
aussiepharm said:
Dont I look stupid. I just assumed it was the search one from the other threads about other xerpias
Click to expand...
Click to collapse
Unlocking the bootloader is what requires the search key. Flashtool is the back key. I can see how it would be easy to confuse them.
Sent from my R800
You cant unlock the bootloader on a rogers phone as it is factory locked. There is a gentleman on these fourms who has the tools to unlock the bootloader remotely but it will cost you a few bucks to do. Search for the thread if your intested, but dont bother trying to get into fastboot without him, you cant
sdlaurin said:
You cant unlock the bootloader on a rogers phone as it is factory locked. There is a gentleman on these fourms who has the tools to unlock the bootloader remotely but it will cost you a few bucks to do. Search for the thread if your intested, but dont bother trying to get into fastboot without him, you cant
Click to expand...
Click to collapse
He isn't trying to unlock it, read the posts..
Sent from my R800
captain67 said:
Unlocking the bootloader is what requires the search key. Flashtool is the back key. I can see how it would be easy to confuse them.
Sent from my R800
Click to expand...
Click to collapse
SWEET!!!!!! It works, thanks heaps captain67!!!!!!!!!!!
aussiepharm said:
SWEET!!!!!! It works, thanks heaps captain67!!!!!!!!!!!
Click to expand...
Click to collapse
Knowledge is power, and learning is half the battle. We are all noobs at one point
These forums are the best place to learn.
Sent from my R800
Related
This method has been sent to me by android235, I can not personally attest that it is working so please if you do that, make sure you have a backup or odin to reinstall your phone
After root, use a file explorer.
I use the ES File Explorer downloaded from the market:
- Launch it
- Goto "Settings> File Settings". Be sure that Show hidden files is checked
- Also be sure is checked "Settings > Root Explorer"
- In "Settings > Home directory" write "/" (without the quotes)
explore the "efs" folder in the root
- move the following files in a backup folder somewhere to your internal SD card (you will need them if you want to restore later to original phone setup) : .nv_core.bak, .nv_core.bak.md5, .nv_data.bak, .nv_data.bak.md5, nv_data.bin, nv_data.bin.md5. Moving them they will be deleted from the efs folder (that's ok).
Reboot.
Now you will have it unlocked but with the generic IMEI.
Peace out.
Click to expand...
Click to collapse
All credit go to him and please don't forget to thanks him!
Any way to restore the IMEI afterwards? Or is the simlock check based on the IMEI?
Zhenech said:
Any way to restore the IMEI afterwards? Or is the simlock check based on the IMEI?
Click to expand...
Click to collapse
I suppose the files you saved are to restore if needed, for the rest I don't know as like I said did NOT try myself
Nah. I meant whether it is possible to restore IMEI while still having unlock. If I restore the files, the lock should be back. (My glide is unlocked, but thats not the point)
Sent from my SAMSUNG-SGH-I927R using XDA
I'd rather spend 25$ for an unlock key on Americanunlocker.com
(worked great for me)
In fact, I have tried to hack the nv_data.bin but seems that it is not the same as galaxy SII and galaxy S.
Although you will get unlocked (generic IMEI) when removed those files,
I highly recommand that you have to backup them in a very safe place. Otherwise if you encounter any problems, you have to sent back to AT&T / Rogers.
Sent from my SAMSUNG-SGH-I927R using XDA
The method will work.. i had tested it earlier.. a generic imei will be assigned..
however some operators do not accept generic IMEI..
Update: Previous posts
Please go through posts 16 to 18 on http://forum.xda-developers.com/showthread.php?t=1416569&page=2
This method is perfect ! My phone accept the Free Mobile's SIM card and is recognized by Orange and Free Mobile's networks.
(It connects too on the two another french carriers when theses networks are too low, I don't know why and if the reason is the AT&T ROM or the unlock method. By the way, although I am connected I can't do anything.)
i don't like having a genric IMEI. will wait for anther method or just pay for an unlock key (when i get my device ofcurse )
What do you mean by generic IMEI? Is it all 0s? Does this mean that it will no longer be detected as a smartphone?
I just tried this method and it did work for me thank u
one Q is there any way to fix genric IMEI and keep unlock .
Edit: I restore my files from a back up and relock the phone ..went to ebay bought unlock code for about 8 dollars ..Done
sam.assad said:
I just tried this method and it did work for me thank u
one Q is there any way to fix genric IMEI and keep unlock .
Edit: I restore my files from a back up and relock the phone ..went to ebay bought unlock code for about 8 dollars ..Done
Click to expand...
Click to collapse
I've done the same thing with another website -more expensive x-( (Fastgsm.com), although it worked.
The only problem though is that every now and then the phone asks me again for the network unlock code. This has forced me to carry a text message with the info on the phone. So far it has asked me 3 times the unlock code. Every time I input the same code received, every time it accepts it and gets unlocked. But I think this is strange, this is the first phone I had that this happens.
sigiloso said:
I've done the same thing with another website -more expensive x-( (Fastgsm.com), although it worked.
The only problem though is that every now and then the phone asks me again for the network unlock code. This has forced me to carry a text message with the info on the phone. So far it has asked me 3 times the unlock code. Every time I input the same code received, every time it accepts it and gets unlocked. But I think this is strange, this is the first phone I had that this happens.
Click to expand...
Click to collapse
Maybe the ICS Update will fix this issue.
sigiloso said:
I've done the same thing with another website -more expensive x-( (Fastgsm.com), although it worked.
The only problem though is that every now and then the phone asks me again for the network unlock code. This has forced me to carry a text message with the info on the phone. So far it has asked me 3 times the unlock code. Every time I input the same code received, every time it accepts it and gets unlocked. But I think this is strange, this is the first phone I had that this happens.
Click to expand...
Click to collapse
Having the same problem here! It seems this is a Samsung issue. Very annoying - GRRRR!!!
sam.assad said:
I just tried this method and it did work for me thank u
one Q is there any way to fix genric IMEI and keep unlock .
Edit: I restore my files from a back up and relock the phone ..went to ebay bought unlock code for about 8 dollars ..Done
Click to expand...
Click to collapse
Can you provide me with the ebay seller. I have a Rogers I927R which is locked to network.
petard said:
What do you mean by generic IMEI? Is it all 0s? Does this mean that it will no longer be detected as a smartphone?
Click to expand...
Click to collapse
I lost my backed up copy of nv_data.bin as my sd card is corrupted I am on a rogers captivate. Is there anyway to recover the IMEI as Straight Talk now complains that this device is locked from using network
Well, I found the following thread (http://forum.xda-developers.com/showthread.php?t=881162) but need the values for these lines so I can update my nv_data.bin.
00188008
00188010
00188020
Can one of you help me out?
Thanks,
Captivate or captivate glide?
phatryan69 said:
Captivate or captivate glide?
Click to expand...
Click to collapse
Captivate Glide (Rogers version I927R).
I'm very interested in this thread since i'm french, and about to buy a phone in the US to use it here, in France.
If i understand well, the trick for unlocking it by file deletion is a bad idea since generic IMEI are not too well accepted on french networks, and when you buy an unlock code, it keeps prompting you sometimes.
My other option is the myTouch 4G Slide, so i'd probably better go for it
Ninj said:
I'm very interested in this thread since i'm french, and about to buy a phone in the US to use it here, in France.
If i understand well, the trick for unlocking it by file deletion is a bad idea since generic IMEI are not too well accepted on french networks, and when you buy an unlock code, it keeps prompting you sometimes.
My other option is the myTouch 4G Slide, so i'd probably better go for it
Click to expand...
Click to collapse
you can unlock mytouch 4G Slide easy, but be warned some models have issues with wifi not being able to turn on unless on carrier rom. i know because i have one.
Just wondering how this happened cos it never came up before when I used flashtool.
18/037/2012 14:37:15 - WARN - This file is ignored : simlock.ta
X-Droidinary said:
Just wondering how this happened cos it never came up before when I used flashtool.
18/037/2012 14:37:15 - WARN - This file is ignored : simlock.ta
Click to expand...
Click to collapse
Really don't know exactly what it does, but generally you don't include this file when you bundle a rom with flashtool, so no harm.
X-Droidinary said:
Just wondering how this happened cos it never came up before when I used flashtool.
18/037/2012 14:37:15 - WARN - This file is ignored : simlock.ta
Click to expand...
Click to collapse
me also facing this problem,its make me cannot flash other kernel,can someone help pls
X-Droidinary said:
Just wondering how this happened cos it never came up before when I used flashtool.
18/037/2012 14:37:15 - WARN - This file is ignored : simlock.ta
Click to expand...
Click to collapse
LoveYou4ever said:
me also facing this problem,its make me cannot flash other kernel,can someone help pls
Click to expand...
Click to collapse
Have you guys got a sim locked device. .?
now.i.feel said:
Have you guys got a sim locked device. .?
Click to expand...
Click to collapse
Mine isn't supposed to be simlocked but now it says it is and I don't even know how it happened.
Sent from Noah's Arc using Tapatalk 2
X-Droidinary said:
Mine isn't supposed to be simlocked but now it says it is and I don't even know how it happened.
Sent from Noah's Arc using Tapatalk 2
Click to expand...
Click to collapse
Lol. Get it sim unlocked then you try again. It will work surely then.
now.i.feel said:
Lol. Get it sim unlocked then you try again. It will work surely then.
Click to expand...
Click to collapse
how do i unlock it? That's the whole point of me posting about this.
After i unlock my bootloader, i face this issue. but flashing finished successfully. Sometime it may be a DRM key related item.
Dont flash that file. its simlock data and if you flash it on a phone with different imei then you will kill the phone without any way other than sony service center to fix it.
Don't worry about that, i always get that warning and there was no problem.
coolbuy said:
Dont flash that file. its simlock data and if you flash it on a phone with different imei then you will kill the phone without any way other than sony service center to fix it.
Click to expand...
Click to collapse
I've read this 'simlock.ta' thread with some interest because I have a similar issue myself.. Might you have any suggestions?
In short, my Xperia (Ray) refuses to read my SIM card. In fact, it doesn't even ask me for my PIN number, it just boots as normal but I have no connection to any network. I've tried using the SIM card in another phone and it works fine, therefore the problem is with the phone itself.
I'd recently had my phone network & bootloader unlocked by wotanserver using the test point method - because of this I thought the DRM keys would be fine (e.g. TrackId & Timescape still worked). However, when I was updating from GB .42 to .62 OTA (to flash a GB ROM) my phone bricked! So, I ended up using s1tool to restore the locked bootloader. Then I used flashtool to flash a stock ICS ftf file. It seemed to work (the phone rebooted) but it was then I noticed that the SIM card wasn't being recognised. Also, in the Flashtool log I noticed that a blue line was there saying 'this file is ignored simlock.ta'.
Hard resets & updating with Sony Update Service isn't working and I'm really confused at this stage.
Is my phone screwed for good?
Same Problem with Xperia J
seamo123 said:
I've read this 'simlock.ta' thread with some interest because I have a similar issue myself.. Might you have any suggestions?
In short, my Xperia (Ray) refuses to read my SIM card. In fact, it doesn't even ask me for my PIN number, it just boots as normal but I have no connection to any network. I've tried using the SIM card in another phone and it works fine, therefore the problem is with the phone itself.
I'd recently had my phone network & bootloader unlocked by wotanserver using the test point method - because of this I thought the DRM keys would be fine (e.g. TrackId & Timescape still worked). However, when I was updating from GB .42 to .62 OTA (to flash a GB ROM) my phone bricked! So, I ended up using s1tool to restore the locked bootloader. Then I used flashtool to flash a stock ICS ftf file. It seemed to work (the phone rebooted) but it was then I noticed that the SIM card wasn't being recognised. Also, in the Flashtool log I noticed that a blue line was there saying 'this file is ignored simlock.ta'.
Hard resets & updating with Sony Update Service isn't working and I'm really confused at this stage.
Is my phone screwed for good?
Click to expand...
Click to collapse
Did you find a solution for your problem?
In reality, I have the same problem with an xperia j (ST26i) , with some differences:
Initial Problem:
- The mobile belongs to my cousin, she updated it with the sony update center to the latest version (JB 4.1.2) and there: problem with the wifi when the sim.
- I got the mobile, and downgrade to the 4.0.4 version, I've tried 4 different versions:
-> ST26i_11.0.A.3.18_Global
-> ST26i_11.0.A.7.5_CE
-> ST26i_11.0.A.3.28_WE
-> St26i_4.0.4_11.0.A.3.28_CE3
I had always the problem with the wifi when the sim plugged.
Finally I've tried also the UNOFFICIAL CM 10, with no success
- I found a solution with the apk wifix manager witch worked with the 28 WE version of the firmware.
But I've continued to search an other solution, and I've remarked that when I flash the rom I always get the Warn: "This file is ignored : simlock.ta "
After some research I get an advice by a member of XDA to rename the file as "preset.ta", AND THERE, it works no warning ... BUT the sim is blocked (not locked) and I have always the message (invalid card).
I've tried to reflash the firmware many times, to relock the bootloader (with appropriate ftf proposed in this forum ), Tried to use the sony update service .. But I have always the same problem (INVALID CARD)
I've also tried to format everything with CWM (system,card,cache) and made a sdcard partition, and NO way.
So, can any body help me with that please?!
Note : I'm in the middle east zone, some suggestions in the web talk about re-installing the official O2 rom, but I've searched this ROM with no success.
X-Droidinary said:
Just wondering how this happened cos it never came up before when I used flashtool.
18/037/2012 14:37:15 - WARN - This file is ignored : simlock.ta
Click to expand...
Click to collapse
I have this error on XPERIA SP C5303 trying to flash 12.0.A.1.284 on top of 12.0.A.1.257. But my phone is SIM Locked and I know it. And I thought that rewriting simlock.ta from unlocked firmware unlock the phone as well. But flashtool skipping that file. It's really annoying !!! Don't know what to do to unlock it now
pxnx said:
I have this error on XPERIA SP C5303 trying to flash 12.0.A.1.284 on top of 12.0.A.1.257. But my phone is SIM Locked and I know it. And I thought that rewriting simlock.ta from unlocked firmware unlock the phone as well. But flashtool skipping that file. It's really annoying !!! Don't know what to do to unlock it now
Click to expand...
Click to collapse
You should be happy it isn't flashing. FLASHING SOMEONE ELSE'S TA MAY HARD-BRICK YOUR DEVICE. In this state, I've heard even sony need to replace entire motherboard.
well i have sony tipo dual st21i2 android phone and i have same problem with device my phone is dual sim phone and both sim are work well some time ago but when itry to update firmware using flash tool and than i see the 2nd sim is working stopped suddenly and sim 1 is working good and if i put only sim 2 in the phone its also working good and if sim 1 ony present in phone its good working also ,,,,,,,but problem start when i put both sim inside the phone and than i try different type of firmwares but no success bootloder unlock and relocked also but no result but my doubt is there i try a secret code and if this code is cause the problem in my phone *#*#7378423#*#* so if any one have idea to solve my problem please share here
Hello, i have an xperia play which is R800i, it's bootloader unlocked, and should be network unlocked, if i go in that option with brackets like [] Network etc they are all with empty brackets and 0, according to some pages its fully unlocked, but still, i cannot get it to work, i've made several baseband changes, roms, etc,
what could be the problem of the phone? i bought it from someone that i usually buy stuff off, so i "shuld" be sure its not imei locked, but then, even if it was imei locked, would i be able to set a PINfor the SIM card? is there a way to check if there's a SIM card inserted in the phone from android? because i feel like it doesn't read my sim at all.
Please suggestions are welcome i tried everything, thank you
i can pay for a solution if its 100% working
hi
KActat1992 said:
Hello, i have an xperia play which is R800i, it's bootloader unlocked, and should be network unlocked, if i go in that option with brackets like [] Network etc they are all with empty brackets and 0, according to some pages its fully unlocked, but still, i cannot get it to work, i've made several baseband changes, roms, etc,
what could be the problem of the phone? i bought it from someone that i usually buy stuff off, so i "shuld" be sure its not imei locked, but then, even if it was imei locked, would i be able to set a PINfor the SIM card? is there a way to check if there's a SIM card inserted in the phone from android? because i feel like it doesn't read my sim at all.
Please suggestions are welcome i tried everything, thank you
Click to expand...
Click to collapse
i can try to fix it ..... contact me on gtalk [email protected]
kks111 said:
i can try to fix it ..... contact me on gtalk [email protected]
Click to expand...
Click to collapse
He couldn't fix it because he said its after some week date etc, but really is there nothing to try?
Also what may be the reason after i flash a kernel it stays black screen? could kernel help resolve sim issues?
hi,replying cause i have same problem..i unlocked the bootloader with sony offcial method the second i had it in my hands and flashed a custom rom(everything working fine before the flashing..)..oddly i could use data(browser youtube facebook ecc working) but no calls or text..so i relocked bootloader and flashed with seus but nothing to do,same problem data working but no calls or text..then i unlocked again tried some roms,then decided to relock and give a try again with seus..now it won't recognise the sim at all,and NO FASTBOOT,it was working fine before the 2nd flash with seus,and i know for sure it's not an hardware issue...flashed many simlock.ta(changing the name to preset.ta) with flashtools..bot nothing.now i can only flash stock tft,since fastboot is no longer working(so i can't unlock the bootloader for the 3rd time), everytime after first boot it ask to insert sim and reboot, even if it ask for pin if i set it..so it IS reading the sim...the radio is bricked,been searching for 2 weeks now, and no solution found. i contacted alejandrissimo, he said he coul fix broken trim area for 20$, but it isn't answering to my messages anymore..sorry bro it looks like our play it's gone forever as a phone, so far..
plese help.....
my xplay not working edge network but 3g working good....
many much frmwre i try...but not sucses....
im using xperia play r800i gb 2.3.4
I have the same issue in xperia play R800i too, network 2g not working anymore I tried several sim cards, not worked , my bootloader unlocked as my battery is drain in 5 hours too even I tried everything rooms kernels basebands , apps closing google play service all solutions in the net,with no hope :s , hardware problem ? it' snot because i heard someone found some new formation that it's an problem in baseband and it's happened to his Sk18i and Sony fixed it by ICS update , it's has the same problem no 2g and battery drain in 12 hours and after he updated the battery fixed it's goes for 48 ours with normal use and the 2g worked , and the problem is there is no official Ics update in our device
any one can help ?? or find solution ,, I'm sure that there are many many people who are suffering with this horrible problem
xkiasfansuryx said:
plese help.....
my xplay not working edge network but 3g working good....
many much frmwre i try...but not sucses....
im using xperia play r800i gb 2.3.4
Click to expand...
Click to collapse
Check your APNs, from my experience they get reset if you flash a generic FTF
---------- Post added at 10:09 AM ---------- Previous post was at 10:07 AM ----------
inaroom said:
hi,replying cause i have same problem..i unlocked the bootloader with sony offcial method the second i had it in my hands and flashed a custom rom(everything working fine before the flashing..)..oddly i could use data(browser youtube facebook ecc working) but no calls or text..so i relocked bootloader and flashed with seus but nothing to do,same problem data working but no calls or text..then i unlocked again tried some roms,then decided to relock and give a try again with seus..now it won't recognise the sim at all,and NO FASTBOOT,it was working fine before the 2nd flash with seus,and i know for sure it's not an hardware issue...flashed many simlock.ta(changing the name to preset.ta) with flashtools..bot nothing.now i can only flash stock tft,since fastboot is no longer working(so i can't unlock the bootloader for the 3rd time), everytime after first boot it ask to insert sim and reboot, even if it ask for pin if i set it..so it IS reading the sim...the radio is bricked,been searching for 2 weeks now, and no solution found. i contacted alejandrissimo, he said he coul fix broken trim area for 20$, but it isn't answering to my messages anymore..sorry bro it looks like our play it's gone forever as a phone, so far..
Click to expand...
Click to collapse
I'm 100% sure having a locked boot loader makes accessing fast boot impossible? If you can still flash FTF find one for an ICS Rom and see if that fixes it
SubjectSigma said:
Check your APNs, from my experience they get reset if you flash a generic FTF
---------- Post added at 10:09 AM ---------- Previous post was at 10:07 AM ----------
I'm 100% sure having a locked boot loader makes accessing fast boot impossible? If you can still flash FTF find one for an ICS Rom and see if that fixes it
Click to expand...
Click to collapse
thanks for replying, i reflashed with wotan and now i have unlocked bootloader, and can flash but the problem on 3g stiil exist. i'm on superjellybean8, and sometimes it will lose the signal on 3g(but data fully working) i get emergency call only,i can browse and other data task like facebook etc, but no call or text, so i turn airplane mode on off until it gets the signal(wich sometimes is very very painful and slow..). i usually get no problem on 2g..so may i start thinking it could be hardware problem on the 3g antenna or something? i've been using it for a couple month now,if i could get rid of the 3g problem it would be great..it makes me miss some important calls you know..
inaroom said:
thanks for replying, i reflashed with wotan and now i have unlocked bootloader, and can flash but the problem on 3g stiil exist. i'm on superjellybean8, and sometimes it will lose the signal on 3g(but data fully working) i get emergency call only,i can browse and other data task like facebook etc, but no call or text, so i turn airplane mode on off until it gets the signal(wich sometimes is very very painful and slow..). i usually get no problem on 2g..so may i start thinking it could be hardware problem on the 3g antenna or something? i've been using it for a couple month now,if i could get rid of the 3g problem it would be great..it makes me miss some important calls you know..
Click to expand...
Click to collapse
I'm pretty sure the GSM attenna is on the top left on the opposite of side of the power button, have you dropped it recently?
Just occurred to me now, call your service provider and see if the 3G tower in your area is undergoing maintenance
SubjectSigma said:
I'm pretty sure the GSM attenna is on the top left on the opposite of side of the power button, have you dropped it recently?
Just occurred to me now, call your service provider and see if the 3G tower in your area is undergoing maintenance
Click to expand...
Click to collapse
that's what happens.. it get the net but then give the emergency calls only message..
inaroom said:
that's what happens.. it get the net but then give the emergency calls only message..
Click to expand...
Click to collapse
I wouldn't post your IMEI on the internet
SubjectSigma said:
I wouldn't post your IMEI on the internet
Click to expand...
Click to collapse
thanks for the advice didn't think about it..
inaroom said:
that's what happens.. it get the net but then give the emergency calls only message..
Click to expand...
Click to collapse
no one knows?
Won't you mind if I join this thread?
I've got r800i unlocked from aliexpress which was working fine but had non-working touch-sticks.
So I tried to flash newer firmware (.79) and end up with 'no service' problem.
Like OP I have "[] Network 0" so it's definitley not become locked but it doesn't see my provider.
The funny thing is that it does see one of the local providers but only one of three.
Tried different ftf's, currently on R800i_4.0.2.A.0.84_Vodafone DE_(1247-8566).
The only thing I know from the original firmware (from flashtool) is:
Current device : R800i - CB5A1D6HYX - 1247-6268_R8D - 1245-8821_4.0.2.A.0.42 - WORLD-1-8_4.0.2.A.0.42
As I understand this one had Meteor IE baseband.
Is this problem has something with firmware or could it be antenna/hardware problem?
gvma said:
Won't you mind if I join this thread?
I've got r800i unlocked from aliexpress which was working fine but had non-working touch-sticks.
So I tried to flash newer firmware (.79) and end up with 'no service' problem.
Like OP I have "[] Network 0" so it's definitley not become locked but it doesn't see my provider.
The funny thing is that it does see one of the local providers but only one of three.
Tried different ftf's, currently on R800i_4.0.2.A.0.84_Vodafone DE_(1247-8566).
The only thing I know from the original firmware (from flashtool) is:
Current device : R800i - CB5A1D6HYX - 1247-6268_R8D - 1245-8821_4.0.2.A.0.42 - WORLD-1-8_4.0.2.A.0.42
As I understand this one had Meteor IE baseband.
Is this problem has something with firmware or could it be antenna/hardware problem?
Click to expand...
Click to collapse
I had problem with "no service" after flash FTF, so the idea its baseband related, I try flash another one, and with R800i_-80_Baseband_GSM.ftf I have success, i have carrier again. maybe help someone
mikrom.cz said:
I had problem with "no service" after flash FTF, so the idea its baseband related, I try flash another one, and with R800i_-80_Baseband_GSM.ftf I have success, i have carrier again. maybe help someone
Click to expand...
Click to collapse
Thanks bro, but I sent the faulty device back to China. That's was the first idea - to change basebands, but that didn't help either in my case.
Hey guys,
Looking for some help here. For what ever reason the unlock code that T-Mobile sent me does not work - resulting in T-Mobile giving me a $200 credit which is nice, but I would still like to get my phone working with ATT.
I have downgraded to 4.1.1 to do the free unlock methodhttp://forum.xda-developers.com/showthread.php?p=34661189, but my baseband is still at UVUCMK7. I have tried rebooting the phone into recovery mode and installing Stock-TMO-T889UVALK8-Kernel.zip but although it says it was successful, the baseband is not changed.
Any ideas? Help?
Thanks
DB
What happens when you put in an AT&T SIM?
kozmo21 said:
What happens when you put in an AT&T SIM?
Click to expand...
Click to collapse
When I follow the unlock code it works all the way through to where they say go back to NETWORK LOCK and choose option 4. Option 4 is not there.
When I reboot with the ATT sim it simply asks me for the network unlock code.
So Baseband is still: UVUCMK7, Android version is 4.1.1, Kernel is 3.0.31-598701
DB
dabajan said:
When I follow the unlock code it works all the way through to where they say go back to NETWORK LOCK and choose option 4. Option 4 is not there.
When I reboot with the ATT sim it simply asks me for the network unlock code.
So Baseband is still: UVUCMK7, Android version is 4.1.1, Kernel is 3.0.31-598701
DB
Click to expand...
Click to collapse
Flash the VALJ1 modem from this thread... http://forum.xda-developers.com/showthread.php?t=2102380 then try the unlock again.
kozmo21 said:
Flash the VALJ1 modem from this thread... http://forum.xda-developers.com/showthread.php?t=2102380 then try the unlock again.
Click to expand...
Click to collapse
Ok, I installed Mobile Odin Lite and used that to flash the modem and looks like I have success!
Thanks for the links and advice.
Now to get mobile data and LTE to work.
DB
dabajan said:
Ok, I installed Mobile Odin Lite and used that to flash the modem and looks like I have success!
Thanks for the links and advice.
Now to get mobile data and LTE to work.
DB
Click to expand...
Click to collapse
Once the device is unlocked you will need to go back to an LTE enabled modem. Your previous radio would be your most likely solution.
Hastily spouted for your befuddlement
I have a T-mobile Samsung Note 2 (SGH-T889), that I'm trying to unlock. I have downloaded the file from the links listed here on XDA. I have already downloaded Odin307 and the Samsung USB driver. My problem is Everytime I put connect the phone, open Odin, and put the phone in download mode and add the file to Odin then while it says Please Wait.. (just a few seconds after adding the file) then Odin has Not Responding come across the top. I have deleted all the things I downloaded and re-downloaded them after it did that a few times and its still doing it. I have tried the downloads from different sites and it doesn't seem to make a difference.
Can Anyone Please Help me?
Thanks to Anyone who will take the time to help me.
Hey guys. I'm very new and have spent the last few days researching about how the whole rooting, unlocking sim, unlocking bootloader, flashing radios and installing customer ROM's work.
From what I understand the process all start with having an unlocked bootloader so that you can install a recovery like TWRP. From there, you can flash ROM's, radios and kernels (if you want to) via zip files, from an micro sd card.
**please let me know if I understand this process correctly**
The problem is, I can't find a single place online (searched on this site and on google for over an hour straight last night) that actually tells you specifically for my model I317M with 4.1.1 (if that matters, I'm not sure) HOW to unlock the bootloader. I've seen a lot of people asking and no answers.
If someone could please tell me exactly HOW to unlock the bootloader for my phone that'd be amazing.
Is flashing the bootloader done via odin? (there is an option in odin for it) If not, how do you flash a bootloader?
Jay26Canada said:
Hey guys. I'm very new and have spent the last few days researching about how the whole rooting, unlocking sim, unlocking bootloader, flashing radios and installing customer ROM's work.
From what I understand the process all start with having an unlocked bootloader so that you can install a recovery like TWRP. From there, you can flash ROM's, radios and kernels (if you want to) via zip files, from an micro sd card.
**please let me know if I understand this process correctly**
The problem is, I can't find a single place online (searched on this site and on google for over an hour straight last night) that actually tells you specifically for my model I317M with 4.1.1 (if that matters, I'm not sure) HOW to unlock the bootloader. I've seen a lot of people asking and no answers.
If someone could please tell me exactly HOW to unlock the bootloader for my phone that'd be amazing.
Is flashing the bootloader done via odin? (there is an option in odin for it) If not, how do you flash a bootloader?
Click to expand...
Click to collapse
You are lucky to have the device you do because the bootloader isn't locked! Some carriers lock the bootloader on some devices (it varies, like note 2 on at&t is unlocked but note 4 is locked). Some manufacturers even offer instructions or tools to unlock (ie htc offers Dev tools, on Google's nexus line it's a simple adb command "fastboot oem unlock").
Now for the i317, the procedure is simple. Gain root access with cf auto root (it's a tar.md5 file you flash with Odin. As a side note: Odin is a tool you will come to love because it can fix nearly anything you break. Just load the stock firmware for your device in Odin, flash and done. From there you can reroot or remain stock). Once you have root access after flashing cf auto root, have your custom recovery tar.md5 on hand to also flash in Odin.
So Odin, cf auto root, and recovery of your choice. (To flash the phone with Odin, the phone must be in download mode: vol-, home, power. Connect to computer and load up Odin)
Once you have flashed your root files and recovery, you can then enter recovery by holding vol+, home, and power, make a backup of your current stock setup, and then flash whatever rom you like as long as it's compatible with your device.
One more piece of advice: if you want to do anything like carrier unlock the device, I would do it now while you're on 4.1.1. In kitkat 4.4.2 and above some of the built in functionality of dialer codes and such were removed by Samsung... and people looking to carrier unlock who have already updated have to go through the tedious downgrade procedure to do so. Therefore, if that is something you are planning on needing at some point (or to just up the resale value of the device a bit), go ahead and root + recovery, then carrier unlock the device using dialer codes as specified in some of these threads. Then you can flash whatever you want and nothing can undo that unlock (mine is an att i317 on tmobile, so I highly recommend carrier unlock, you never know when you might need it!) Just do it before you move from 4.1.1 if you do want to do it
Good luck
absinthesummer said:
You are lucky to have the device you do because the bootloader isn't locked! Some carriers lock the bootloader on some devices (it varies, like note 2 on at&t is unlocked but note 4 is locked). Some manufacturers even offer instructions or tools to unlock (ie htc offers Dev tools, on Google's nexus line it's a simple adb command "fastboot oem unlock").
Now for the i317, the procedure is simple. Gain root access with cf auto root (it's a tar.md5 file you flash with Odin. As a side note: Odin is a tool you will come to love because it can fix nearly anything you break. Just load the stock firmware for your device in Odin, flash and done. From there you can reroot or remain stock). Once you have root access after flashing cf auto root, have your custom recovery tar.md5 on hand to also flash in Odin.
So Odin, cf auto root, and recovery of your choice. (To flash the phone with Odin, the phone must be in download mode: vol-, home, power. Connect to computer and load up Odin)
Once you have flashed your root files and recovery, you can then enter recovery by holding vol+, home, and power, make a backup of your current stock setup, and then flash whatever rom you like as long as it's compatible with your device.
One more piece of advice: if you want to do anything like carrier unlock the device, I would do it now while you're on 4.1.1. In kitkat 4.4.2 and above some of the built in functionality of dialer codes and such were removed by Samsung... and people looking to carrier unlock who have already updated have to go through the tedious downgrade procedure to do so. Therefore, if that is something you are planning on needing at some point (or to just up the resale value of the device a bit), go ahead and root + recovery, then carrier unlock the device using dialer codes as specified in some of these threads. Then you can flash whatever you want and nothing can undo that unlock (mine is an att i317 on tmobile, so I highly recommend carrier unlock, you never know when you might need it!) Just do it before you move from 4.1.1 if you do want to do it
Good luck
Click to expand...
Click to collapse
Wow! Thanks a lot for that detailed reply. I wasn't expecting that
I managed to get a recovery installed and working. I've tried two ROMs today and that was neat. ( I put them on the external sd card and flashed the .zip from recovery ). Now my main problem is, finding a ROM that actually works decently (any suggestions would be nice) and unlocking the sim.
Now, I was on 4.1.1. and when I was there, I followed these steps http://forum.xda-developers.com/showthread.php?t=2014982 and it seemed to have worked. It went just like the steps said it would.
Then, I actually went to a WIND mobile store today and asked if I could use a SIM to see if it would work with their network. It didn't (their network didn't show up on my phone )
I've since then tried that old method again but I am getting this error "connection problem or invalid mmi code" So I couldn't try doing that again.
Now I'm kinda stuck. I have been trying to find out if I can flash the radio with some firmware to fix it but I've had no luck finding anything.
I know this is a newish problem, but if you can guide me in the right direction or help me out I'd appreciate it. Otherwise, I might just have to buy a new phone.
Jay26Canada said:
Wow! Thanks a lot for that detailed reply. I wasn't expecting that
I managed to get a recovery installed and working. I've tried two ROMs today and that was neat. ( I put them on the external sd card and flashed the .zip from recovery ). Now my main problem is, finding a ROM that actually works decently (any suggestions would be nice) and unlocking the sim.
Now, I was on 4.1.1. and when I was there, I followed these steps http://forum.xda-developers.com/showthread.php?t=2014982 and it seemed to have worked. It went just like the steps said it would.
Then, I actually went to a WIND mobile store today and asked if I could use a SIM to see if it would work with their network. It didn't (their network didn't show up on my phone )
I've since then tried that old method again but I am getting this error "connection problem or invalid mmi code" So I couldn't try doing that again.
Now I'm kinda stuck. I have been trying to find out if I can flash the radio with some firmware to fix it but I've had no luck finding anything.
I know this is a newish problem, but if you can guide me in the right direction or help me out I'd appreciate it. Otherwise, I might just have to buy a new phone.
Click to expand...
Click to collapse
Im at work so I don't have a lot of time to explain, but the unlock probably worked fine. However, when you add a new Sim, you also have to program the access point name (or more commonly, APN). If you don't set the apn, the phone won't know which network to connect to. You may use a wind sim but if you still have the apn set for tmobile, it's gonna look for tmobile's network.
Apns can be configured under settings > more networks > mobile networks > access point names. You can have multiple apns programmed and switch between them as often as you switch sim cards. Search for wind apn and you'll figure it out (I keep a text file with lists of tmobile and at&t apns just in case.
Also you probably flashed a newer rom where Samsung/Google have removed the built in dialer codes, so you won't be able to use them anymore, but you can launch the codes you need using shortcut master (an app) where you can find the code you need and launch it fine with root permissions.