Related
hello...
i have 1 Softbank X02HT from Japan which came out lock to provider from softbank.. i want to unlock this phone, so i bought unlocking codes from a friend but when the codes arrived and i want to enter it but i cant figure out how to key in those codes,, ive searched a lot of forums how to enter those codes but it seems like my phone is "Counter Blocked" some says i had to flash other roms to be able to enter those codes until i read this http://forum.xda-developers.com/showthread.php?t=398945 now the problem is i cant Application Unlock my phone when i use SDA Application and i gives me error like "Phone is not unlockable"
my phones info :
CAVA100
IPL-0.04
CAVA100
SPL-1.00.0000
please help me to get through with it...
thanks...
LiquidSky said:
hello...
i have 1 Softbank X02HT from Japan which came out lock to provider from softbank.. i want to unlock this phone, so i bought unlocking codes from a friend but when the codes arrived and i want to enter it but i cant figure out how to key in those codes,, ive searched a lot of forums how to enter those codes but it seems like my phone is "Counter Blocked" some says i had to flash other roms to be able to enter those codes until i read this http://forum.xda-developers.com/showthread.php?t=398945 now the problem is i cant Application Unlock my phone when i use SDA Application and i gives me error like "Phone is not unlockable"
my phones info :
CAVA100
IPL-0.04
CAVA100
SPL-1.00.0000
please help me to get through with it...
thanks...
Click to expand...
Click to collapse
so u r able to unlock the sim or not?
cruzzmz said:
so u r able to unlock the sim or not?
Click to expand...
Click to collapse
hello...
i just able to sim unlock the phone via code after flashing this firmware http://rapidshare.com/files/14940579...0_182_Test.exe
but still i cant app unlock the phone... i want to flash WWE rom..
i tried using mtty but then it shows:
CMD>task 32
"Level=FF"
please do help me...
thanks
LiquidSky said:
hello...
i just able to sim unlock the phone via code after flashing this firmware http://rapidshare.com/files/14940579...0_182_Test.exe
but still i cant app unlock the phone... i want to flash WWE rom..
i tried using mtty but then it shows:
CMD>task 32
"Level=FF"
please do help me...
thanks
Click to expand...
Click to collapse
try the hard SPL thread ... there is a program to unlock the phone
cruzzmz said:
try the hard SPL thread ... there is a program to unlock the phone
Click to expand...
Click to collapse
thanks...
the phone is SIM Unlocked now...
but i got this error after using HardSPL-Cavalier-1.0-JockyW
thanks...
LiquidSky said:
thanks...
the phone is SIM Unlocked now...
but i got this error after using HardSPL-Cavalier-1.0-JockyW
thanks...
Click to expand...
Click to collapse
Error 270 ... U must do HardSPL first ... Pls follow instruction on the Hard SPL thread
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
yukster said:
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
Click to expand...
Click to collapse
Have u tried tis tool?
http://forum.xda-developers.com/attachment.php?attachmentid=91644&d=1213100403
what's the end of the story ?
these japanese guys just gone with the wind.
Maybe it's work, because I just did a test on my x02ht. I’m able to modify register through CeRegEditor after SDA_ApplicationUnlock.
Need help to Flash X02HT from JAPAN
HI,
I have been trying desperately to unlock this phone. Before I buy code I need to know it it can be unlocked. When I power on the phone a window keeps popping up with or without asking for SIM unlock code.
I tried JumpSPL and keep get an error: CreateProcess failed with errorcode =30123 - UNKNOWNERROR 0X000075ab.
I still tried HARD SPL -Cavalier 1.0 JockyW and keep getting an error :-
ERROR (270): UPDATE ERROR. The image file is corrupted. Please check your Update Utility.
Please LiquidSky have a file that he used from rapidshare and flashed his phone successfully can anyone share with me please?
I need urgent help
Thanks
I have the same problem. I would appreciate if someone knows how to solve it.
Thanks!
Totalelectronics said:
HI,
I have been trying desperately to unlock this phone. Before I buy code I need to know it it can be unlocked. When I power on the phone a window keeps popping up with or without asking for SIM unlock code.
I tried JumpSPL and keep get an error: CreateProcess failed with errorcode =30123 - UNKNOWNERROR 0X000075ab.
I still tried HARD SPL -Cavalier 1.0 JockyW and keep getting an error :-
ERROR (270): UPDATE ERROR. The image file is corrupted. Please check your Update Utility.
Please LiquidSky have a file that he used from rapidshare and flashed his phone successfully can anyone share with me please?
I need urgent help
Thanks
Click to expand...
Click to collapse
yukster said:
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
Click to expand...
Click to collapse
TESTED and working.......
good ..................................................
OMG!! At last it's working!!
Tried it for several times but now this method works.
For people who couldn't manage the unlock methode try to enter 6 instead of 5 digits after step 1.
Go to the registry, HKCU\System\State\PHONE, and wrote down the first 6 digits of the value of the IMSI entry.
1. type *7465625*638*# to set
2. type the first 6 digits of the value of the IMSI entry here.
3. type your new NCK (12345678), then OK
3. type *#7465625# to check your lock (network lock still enabled)
4. type #7465625*638*# and type your NCK (12345678)
5. enjoy.
old news was posted a few days ago
joeblack2k said:
old news was posted a few days ago
Click to expand...
Click to collapse
Yes but for many people/roms it didn't work. When you do that registry search you'll have the right code immediately.
Samsung M8800
hubo2000 said:
Yes but for many people/roms it didn't work. When you do that registry search you'll have the right code immediately.
Click to expand...
Click to collapse
Hi, guys I can see u had lots of work done on unlocking the Omnia but i did the mistake of buying the M8800 for my girlfriend and cant find the way to unlock it so she can put her simcard...since these codes work for the Omnia, is there a way to adapt them to work on my phone?many thanks and great work u ve done
BICKLARS said:
Hi, guys I can see u had lots of work done on unlocking the Omnia but i did the mistake of buying the M8800 for my girlfriend and cant find the way to unlock it so she can put her simcard...since these codes work for the Omnia, is there a way to adapt them to work on my phone?many thanks and great work u ve done
Click to expand...
Click to collapse
I found this method by searching the forums and googling. I'm not a big geek in this sorry.
this does not work on t*omnia
i have the device running on mobily is saudi arabia. if i input 420032 i get "inncorrect mcc/mnc"
can you use this on vzw omnia i910?
yes, PLEASE, is there a method for the i910
1,000,000 Thx to hubo!
I always had the message "failed to set....". With our describtion i entered 6 numbers and it worked!!!! - lol
Happy ))))
Thx a lot
Neutronsis
P.S.: sorry for worse english, its not my favorite language
help please
Hi guys, i need some help please
it's kind of funny and i'm sure u'll laugh hhhhh
i tried that code *7465625*638*00000000*00000000# on a samsung SGH E250 that was already unlocked... and it was locked on the carrier that was already inside "SFR France", i use that phone when i visit my workers to not make them seem less richer than me so that we can be on the same level at work "u see what i mean" and i have a lot of contacts there.
i tried the #7465625*638*00000000# but it tells me wrong password!! hhh Could you help me to unlock it please??
thank you very much
Unlock your Omnia
I have installed Total Commander - but cannot find the registry. Can someone help me out, please. Not ever used Total Commander before.
I tried on my omnia, and it worked, the network lock disabled (I tried the second description).
But my simlock is still enabled, how can I disable it??
hubo2000 said:
OMG!! At last it's working!!
Tried it for several times but now this method works.
For people who couldn't manage the unlock methode try to enter 6 instead of 5 digits after step 1.
Go to the registry, HKCU\System\State\PHONE, and wrote down the first 6 digits of the value of the IMSI entry.
1. type *7465625*638*# to set
2. type the first 6 digits of the value of the IMSI entry here.
3. type your new NCK (12345678), then OK
3. type *#7465625# to check your lock (network lock still enabled)
4. type #7465625*638*# and type your NCK (12345678)
5. enjoy.
Click to expand...
Click to collapse
I dont have any entry like this in my reg. My phone is not currently active. I want to re-program my omnia i910 from verizon service to GCI wireless in alaska, any ideas?
thanks for code
first time here and would like to thank hubo 2000 after stage 2 of ur method i still got cannot set message so i ignored that and typed in stage 3 code wow got the lock status then followed the rest of ur method and im'e now the proud owner of unlocked omnia i900 ,thanks again
Unlock it using code.
NEW BETTER AND EASY WAY THANKS TO AlexDP
http://forum.xda-developers.com/showthread.php?t=1149265
still need download file from old way
-----------------------------------------
OLD WAY
Hi Guys,
I know that there are other threads but i want create this with instructions in first page and problems and suggests above:
thanks to hd2leo_fusion
MangoB2-ZuneClient.zip - ZIP file that contains the install for the pre-release Zune Client 4.8, required to update your Windows Phone retail device and to connect to your device from the Windows Phone SDK tools.
MangoB2-UpdateWP.zip - ZIP that contains the install program(s) that will install updatewp.exe into your Zune client, allowing you to update your Windows Phone to point to the test servers
MangoB2-DevRetailUpdate.zip - Tool that automates the backup and update process so that your retail phone can receive ‘Mango'
Update Instructions - Mango Beta 2 for WPDevs.pdf - Instructions to walk you through the update process. 15 minutes here can save you 4 weeks without a phone.
Finally, one last reminder about reading the instrctions:
thanks to asbesto
download file here:
1 megaupload DOT COM/?d=WGHWO7DM
2 megaupload DOT COM/?d=PL7H6FKJ
3 megaupload DOT COM/?d=9Q3LBQ4J
4 megaupload DOT COM/?d=KY8J8SIY
5 megaupload DOT COM/?d=WNKD3G9U
thanks to derausgewanderte
not there yet, it's upgrading at the moment (at the last and longest stage). I had mine unlocked via the MFG tool. I reset the two registry keys PortalUrlInt and PortalUrlProd back to the https links
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
"PortalUrlProd"="https://developerservices.windowsphone.com/Services/WindowsPhoneRegistration.svc/01/2010"
"PortalUrlInt"="https://developerservices.windowsphone-int.com/Services/WindowsPhoneRegistration.svc/01/2010"
(thanks to drkfngthdragnlrd)
and set the DeveloperUnlockState to 1. While still in the MFG tool I started the MangoB2-DevRetailUpdate tool.
It would not work initially. Closed the tool, started the new beta Zune software and it relocked the phone. Closed Zune, disconnected phone and went back into the MFG app and unlocked it. Connected phone to PC again, restarted the tool and it started the backup and installation process.
How to Un-Lock your Phone without Chevron 7
You can unlock the phone by using the MFG registry editor.
Open the MFG app and use the password to open it. If you don't know it's (appmfg#*#)
Go to Engineer Menu -> Other Settings -> Edit Registry
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Comm\Security\LVMod"
Set your input key to "DeveloperUnlockState" and set to DWORD
Hit Query. Output result should return a "0" or a random long number. If it does continue.
Set your input data box to "1" and hit SET. Output result should be 1
How To Keep Your Phone Unlocked
You can keep your phone unlocked and prevent Zune from re-locking it.
Open the MFG app and use the password to open it. If you don't know it's (appmfg#*#)
Go to Engineer Menu -> Other Settings -> Edit Registry
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Software\Microsoft\DeviceReg"
Set your input key to "PortalUrlProd" and set to DWORD
Hit Query. Output result should return data. If it does continue.
Keep your input data box empty and hit SET. Output result should be 0
Keep this screen open and continue to Part 2
does your registry editor still work on your lg optimus 7?
not working, still DevRetailUpdate tool detects phone as locked
behh said:
not working, still DevRetailUpdate tool detects phone as locked
Click to expand...
Click to collapse
When I got that message I left the phone connected to the PC, went into the MFG app, change the developerunlock stated back to 1, hit set and tried again and its now Working fine on my LG Optimus
mickfarr said:
When I got that message I left the phone connected to the PC, went into the MFG app, change the developerunlock stated back to 1, hit set and tried again and its now Working fine on my LG Optimus
Click to expand...
Click to collapse
That didn't work for me :/
mickfarr said:
When I got that message I left the phone connected to the PC, went into the MFG app, change the developerunlock stated back to 1, hit set and tried again and its now Working fine on my LG Optimus
Click to expand...
Click to collapse
could u write down the whole process ? ive done it like a milion times, and this crap is still saying im not unlocked.
behh said:
could u write down the whole process ? ive done it like a milion times, and this crap is still saying im not unlocked.
Click to expand...
Click to collapse
i agree with you, i think i didn't manage to pass this error because i have not the whole process.
Constellation06 said:
i agree with you, i think i didn't manage to pass this error because i have not the whole process.
Click to expand...
Click to collapse
The first thing I did was to download and install the Windows Phone Developer Tools. Once downloaded I started it up and then just exited.
Then I went and changed these settings using the MFG app. Make sure they are typed in correctly!!
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
PortalUrlProd = https://developerservices.windowsphone.com/Services/WindowsPhoneRegistration.svc/01/2010
PortalUrlInt = https://developerservices.windowsphone-int.com/Services/WindowsPhoneRegistration.svc/01/2010
I then tried to run the MangoB2-DevRetailUpdate.exe but it gave me an error that it could not find UpdateWP.exe. I renamed the Setup-UpdateWP-x64.exe to UpdateWP.exe but got the same error.
So I just installed the new Test Zune and tried to look for an update there and it didn't find any so I quit Zune and tried to run MangoB2-DevRetailUpdate.exe, this time it work but said my phone was lock so I loaded up MFG, changed the developerunlockstate back to 1, tried again and it work!!
I'm currently on step 7 of 9 in the last update on Zune ISV beta (7661)
EDIT: I haven't had to edit the settings to keep the phone from re-locking, you should only need to do that after you have Mango fully installed.
Make sure you have this set correctly!!!
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
PortalUrlProd = https://developerservices.windowsphone.com/Services/WindowsPhoneRegistration.svc/01/2010
PortalUrlInt = https://developerservices.windowsphone-int.com/Services/WindowsPhoneRegistration.svc/01/2010
IT WOOOOOOOOOOOOOOOOOORKED!!
Thank's A LOT MAN YOU ROCK!
Constellation06 said:
IT WOOOOOOOOOOOOOOOOOORKED!!
Thank's A LOT MAN YOU ROCK!
Click to expand...
Click to collapse
No problem!
The update takes ages but its worth it in the end...
domineus said:
does your registry editor still work on your lg optimus 7?
Click to expand...
Click to collapse
Just finished the whole update and I can confirm that the MFG app still works in the Mango build
I think you should change the title of this thread to LG Keep Unlock Mango Beta or something because only you guys have the MFG tool
It works, thanks for tips guys, best internet forum ever.
For dummys ( like me )
First write in mfg this
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
PortalUrlProd = https://developerservices.windowspho...on.svc/01/2010
PortalUrlInt = https://developerservices.windowspho...on.svc/01/2010
Then run zune, run devupdater
it will close zune, then it will tell u blablabla its locked
NOT THIS ( "Checking if your phone is dev unlocked...
Failed. Please try the following
1) Connect the phone
2) Launch Zune software and wait for it to connect to the device
3) Close Zune software
4) Restart the tool. ") but the other info
Then u have to stay connected to pc, and with still running mfg ulockstate = 1 and run updater again, the rest of it is just next, next, next
Hello my friends does this steps work with the HTC HD7? Thank you
Sent from my HD7 T9292 using XDA Windows Phone 7 App
Somebody made a nice tool that provisions for you, without having to be a developer (or dev unlocked):
http://windowsphonehacker.com/articles/get_the_mango_update_now._without_being_a_developer.-06-30-11
Idk if it works, but sounds promising.
Jaxbot said:
Somebody made a nice tool that provisions for you, without having to be a developer (or dev unlocked):
http://windowsphonehacker.com/articles/get_the_mango_update_now._without_being_a_developer.-06-30-11
Idk if it works, but sounds promising.
Click to expand...
Click to collapse
anyone tried it yet?
Sent from my HD7 T9292 using XDA Windows Phone 7 App
ruyzalim said:
anyone tried it yet?
Sent from my HD7 T9292 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Tried it and it worked for me! Run it, then open Zune and, voila, it asks you to install Mango!
behh said:
It works, thanks for tips guys, best internet forum ever.
For dummys ( like me )
First write in mfg this
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
PortalUrlProd = https://developerservices.windowspho...on.svc/01/2010
PortalUrlInt = https://developerservices.windowspho...on.svc/01/2010
Click to expand...
Click to collapse
Sorry to be a pain but can you dumb it down even more? So are we typing PortalUrlProd = etc in the Input SUB_PATH ?
I am running into an issue where I get an error when installing Setup-UpdateWP-x64, in that it says I need to install Visual Studio 2010 Service Pack 1.
Is this a common occurence for others? It's a pretty big download and I am on crappy work network, so it will take some time. I can do a custom install though, and shave off unneeded components, so if someone could advise me on that it would be great!
the92playboy said:
I am running into an issue where I get an error when installing Setup-UpdateWP-x64, in that it says I need to install Visual Studio 2010 Service Pack 1.
Is this a common occurence for others? It's a pretty big download and I am on crappy work network, so it will take some time. I can do a custom install though, and shave off unneeded components, so if someone could advise me on that it would be great!
Click to expand...
Click to collapse
This method supposedly shaves off the need for VS and all that garbage:
http://bit.ly/lOvrjo
Otherwise, remember, this is for developers.. hence the fact it wants VS installed.
Here we go, this is my first post to XDA, yeah ! First, I would like to apologize for my following English. I'm a frenchie from Canada
I have a hard time to network unlock a Virgin Mobile Gio 5660M. Here is what I did :
1- Depacking the brand new GIO, insert the sdcard and the battery only (no sim card at this time)
2- Charge the battery to 100% with a wall charger
3- Fire up the gio
4- Connect the wifi, setting up a google account in the market
5- Installed the terminal emulator from the market
6- Copy the root zip file on the sdcard
7- Reboot the gio in the stock recovery and install the root zip file, restart
8- Follow succesfuly the S.Chan method to get the unlock code from bml5.
9- Fire up the gio again but with a foreing sim card (Rogers).
10- Network Lock screen appear, put the unlock code and bang : Network Lock unsuccessful.
I tried it another time to be sure, same result. I tried another time with another simcard (Fido), again the same Network Lock unsuccessful message.
So ... I'm sure that the unlock code is ok, what I'm doing wrong ? I'm at the 3 or 4 unlock attempts and freak about trying other things. Any advices ?
Thanks a lot guys
Are you sure you have the right code?
Try searching for 302610, which is the MCC MNC pair for Bell Canada. The next eight digit number will be the code. (It might be quite a bit further into the file, about 5k for my Gio's bml5.)
I could also try making a modified CSC file to lock your phone to Rogers instead.
Hey man,
Upload your bml5.img here
I'll find the code for ya
ADB Method (Make sure you are rooted!!):
Code:
adb shell
su
cat /dev/block/bml5>/sdcard/bml5.img
exit
exit
adb pull /sdcard/bml5.img
Terminal Emulator Method (Make sure you are rooted!!):
Code:
su
cat /dev/block/bml5>/sdcard/bml5.img
exit
exit
Universal GingerBread Root (Click Me!)
Hi ! Here is my bml5 file. I'm sure that the unlock code is 72618358. Let me know if it's not the case.
I think I dump by catting /dev/bml5, any differences with /dev/block/bml5 ? Thanks a lot !
Yeah man! I got the same code: 72618358
Did you make sure you typed it correctly?
Wheres the tutorial to do this??
Sent from my GT-S5660 using xda premium
voetbalremco said:
Wheres the tutorial to do this??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1335548
Hope this helps!
Peteragent5 said:
http://forum.xda-developers.com/showthread.php?t=1335548
Hope this helps!
Click to expand...
Click to collapse
Can you get my code if I can give you my file??
Sent from my GT-S5660 using xda premium
voetbalremco said:
Can you get my code if I can give you my file??
Click to expand...
Click to collapse
Yeah man. But right now I gotta go to the Doctor with my parents. So just upload it here or give me link to mediafire.
Peteragent5 said:
Yeah man! I got the same code: 72618358
Did you make sure you typed it correctly?
Click to expand...
Click to collapse
Yeah sure. It's the reason why I'm posting here. I'm like what the **** I'l probably give up, it's a friend gio and he will probably return it to the store. Just another question, do you know if there a countdown of attempts of unlock ? May I freeze the phone by trying it multiple time ? Maybe I could try to unlock it with the special code #7465625*638*CODE# with no simcard in but like I said, I'l do it only if there is no countdown of attempts of unlock because I don't want to freeze the phone hehe
Salocink said:
Yeah sure. It's the reason why I'm posting here. I'm like what the **** I'l probably give up, it's a friend gio and he will probably return it to the store. Just another question, do you know if there a countdown of attempts of unlock ? May I freeze the phone by trying it multiple time ? Maybe I could try to unlock it with the special code #7465625*638*CODE# with no simcard in but like I said, I'l do it only if there is no countdown of attempts of unlock because I don't want to freeze the phone hehe
Click to expand...
Click to collapse
There is a limited number of tries. I think 3 or 5.
Three is no "CODE" to unlock your phone but a code to tell you if your phone is locked or not.
You must insert a different sim card for this to work.
You must be on Stock Rom.
One more thing you could try, if you're interested:
If you haven't already, install CWM on the phone.
Boot to recovery, fire up adb shell and mount stl5.
Yes, stl5, the dreaded partition known to brick phones the world over. The difference is that we're in recovery here, and should be safe.
ADB pull /efs/mits/perso.txt from the phone.
Open the txt file in a hex editor.
Replace the first 30 bytes from:
Code:
01 00 00 00 00 01 33 30 32 36 31 30 32 30 34 30 34 23 30 30 31 30 31 23 39 39 39 39 39 23
To this:
Code:
00 00 00 00 00 01 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
adb push the file back into place.
Unmount the stl5 partition
Reboot phone. Make sure IMEI is still intact. (If not: sorry...)
Turn off the phone, attempt to use it with a "foreign" SIM card.
Let us know how that goes,
Darkshado
Lol! STL5 is quite risky..
Hee Remco. Just follow the tutorial you can easily do it yourself it's very easy. I followed the second method and unlocked my phone with ease. I if I can do it everyone can. Haha.
Thanks for you helps. If it was my GIO, I'l probably test other things but my friend will get it back to the store for an exchange or something else, I don't know. Maybe newer GIO's got some new security.
Peteragent5 said:
There is a limited number of tries. I think 3 or 5.
Three is no "CODE" to unlock your phone but a code to tell you if your phone is locked or not.
You must insert a different sim card for this to work.
You must be on Stock Rom.
Click to expand...
Click to collapse
Hi all, bumping this thread.
Have a question, I put CM9 beta on my phone and haven't unlocked it. I want to unlock because I want to switch from Bell to Wind.
Will this not work with CM9?
Thanks in advance.
St1ck33 said:
Hi all, bumping this thread.
Have a question, I put CM9 beta on my phone and haven't unlocked it. I want to unlock because I want to switch from Bell to Wind.
Will this not work with CM9?
Thanks in advance.
Click to expand...
Click to collapse
problably not, you can try..
but to do it via stock:
backup via recovery, flash stock, instert the foreign simcard, enter the code, and restore cm9
voetbalremco said:
problably not, you can try..
but to do it via stock:
backup via recovery, flash stock, instert the foreign simcard, enter the code, and restore cm9
Click to expand...
Click to collapse
Thanks. I tried putting in another sim just to see if I get a pop up to input the code, but no such screen came up.
I might try using these from the other thread:
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock
#7465625*27*Code# = Disables CP lock
*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
source: twilightwap .com /mobile/secrets.asp?phone=Samsung3 (sorry can't post links yet)
Click to expand...
Click to collapse
St1ck33: Unlocking your Gio will only help you selling it. Wind uses the AWS band, which the Gio 5660M (or any other known model of it, for that matter) does not support.
I am not aware of *any* device being able to prompt for a SIM unlock code from when running AOSP or CM.
Darkshado said:
St1ck33: Unlocking your Gio will only help you selling it. Wind uses the AWS band, which the Gio 5660M (or any other known model of it, for that matter) does not support.
I am not aware of *any* device being able to prompt for a SIM unlock code from when running AOSP or CM.
Click to expand...
Click to collapse
Thanks Darkshado - for some reason I thought the Gio would work on Wind.
Oh well, will ride out the rest of my Bell contract.
Hey, XDA-Devs I need some help. I been trying to use this tool to reinject my Imei because I lost it. I have no service, and btw I am not a developer or anything. The tool I was using is
[FIX/TOOL] Backup/Restore/Fix IMEI & Data Restore Tool v3.0 - Updated 11/01/2012!!!
and I am stuck at where It says
Click the Hex Check Box. The Hex values for your IMEI will consist of no more than 2 characters per a box and must match your IMEI or it will not take the values you enter. The IMEI is also listed in a special order so you must follow this guide to ensure your IMEI is correct.
The first box will always be an 8.
Example if your IMEI was: 954091051099226then the boxes would look like so:
8
9a
45
90
1
15
90
29
62
Click to expand...
Click to collapse
Lets say is my IMEI # (BTW Not my real #)
354420050240327
How can I enter it to the program. I need some help with that for example.
8
3a
44
.....
I don't know how to put the numbers in the correct positions.
DaveenJay said:
Hey, XDA-Devs I need some help. I been trying to use this tool to reinject my Imei because I lost it. I have no service, and btw I am not a developer or anything. The tool I was using is
[FIX/TOOL] Backup/Restore/Fix IMEI & Data Restore Tool v3.0 - Updated 11/01/2012!!!
and I am stuck at where It says
if you could help me with it that will be great.
Click to expand...
Click to collapse
Never ever post your imei on a post or anywhere infact. That's like the identity of your phone. Please remove it off your post. The guide that you got this info from will help you. Please read it again.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
<post removed; taken to PM>