Develop Bugs

[Q] Error while trying to apply lates OTA Update on Desire Z

Hy,
yesterday i tried to apply the lates OTA Update for my desire Z (rooted, s-off, OC Kernel), but Clockwork Recovery only says "Signature verification failed".
Can anyone help me?
(sorry for my english...)

Stock updates will not work with a custom recovery. You either have to flash back to stock and sacrifice root or find a custom ROM based on the newest build.
I don't have a G2, I'm just browsing through this section reading about it, but that's the way it works on my Nexus with clockwork. Flashing back to stock might be dangerous if the newest build hasn't been exploited and rooted.
Also, make sure you post in the correct section next time. This doesn't belong in development; it should be in Q&A. I'm sure a mod will move it for you this time though.

Instaling OTA = error
I had the same problem S-OFF and 1,42 GHz, no way to install that update. I had to flash stock ROM and then it worked fine. Now running 1.72.405.2 no overclock

Sorry for posting in the wrong section
How can i revert to complete stock? (No overclock, no clockwork recovery)

Martin_F said:
I had the same problem S-OFF and 1,42 GHz, no way to install that update. I had to flash stock ROM and then it worked fine. Now running 1.72.405.2 no overclock
Click to expand...
Click to collapse
After you upgrade was it possible to root the device?

buzmay said:
After you upgrade was it possible to root the device?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=886023

TheSilence said:
Sorry for posting in the wrong section
How can i revert to complete stock? (No overclock, no clockwork recovery)
Click to expand...
Click to collapse
Maybe when applying the update you need to in clockworkmod turn sing verification off and after that select update.zip

when i turn signature verification off i get the following error:
script aborted: assert failed: getprop("ro.cid") == "00000000" ||
getprop("ro.cid") == "11111111" || getprop("ro.cid") == "22222222" ||
getprop("ro.cid") == "33333333" || getprop("ro.cid") == "44444444" ||
getprop("ro.cid") == "55555555" || getprop("ro.cid") == "66666666" ||
getprop("ro.cid") == "77777777" || getprop("ro.cid") == "88888888" ||
getprop("ro.cid") == "99999999" || getprop("ro.cid") == "HTC__001" ||
getprop("ro.cid") == "HTC__032" || getprop("ro.cid") == "HTC__E11" ||
getprop("ro.cid") == "HTC__203" || getprop("ro.cid") == "HTC__Y13" ||
getprop("ro.cid") == "HTC__102" || getprop("ro.cid") == "HTC__405" ||
getprop("ro.cid") == "HTC__304" || getprop("ro.cid") == "HTC__A07" ||
getprop("ro.cid") == "HTC__N34" || getprop("ro.cid") == "HTC__J15" ||
getprop("ro.cid") == "HTC__001" || getprop("ro.cid") == "HTC__E11" ||
getprop("ro.cid") == "HTC__Y13" || getprop("ro.cid") == "HTC__405" ||
getprop("ro.cid") == "HTC__A07" ||
getprop("ro.cid") == "HTC__J15"
assert failed: getprop("ro.cid") == "00000000" || getprop("ro.cid") == "11111111" || getprop("ro.cid") == "22222222" || getprop("ro.cid") == "33333333" || getprop("ro.cid") == "44444444" || getprop("ro.cid") == "55555555" || getprop("ro.cid") == "66666666" || getprop("ro.cid") == "77777777" || getprop("ro.cid") == "88888888" || getprop("ro.cid") == "99999999" || getprop("ro.cid") == "HTC__001" || getprop("ro.cid") == "HTC__032" || getprop("ro.cid") == "HTC__E11" || getprop("ro.cid") == "HTC__203" || getprop("ro.cid") == "HTC__Y13" || getprop("ro.cid") == "HTC__102" || getprop("ro.cid") == "HTC__405" || getprop("ro.cid") == "HTC__304" || getprop("ro.cid") == "HTC__A07" || getprop("ro.cid") == "HTC__N34" || getprop("ro.cid") == "HTC__J15" || getprop("ro.cid") == "HTC__001" || getprop("ro.cid") == "HTC__E11" || getprop("ro.cid") == "HTC__Y13" || getprop("ro.cid") == "HTC__405" || getprop("ro.cid") == "HTC__A07" || getprop("ro.cid") == "HTC__J15"
E:Error in /sdcard/download/OTA_Vision_HTC_WWE_1_72_405_2_R-1_34_405_5_P_release_163499w0m1z3ghgttstsll.zip
(Status 7)
Installation aborted.
Failure at line 3:
install_zip SDCARD:/download/OTA_Vision_HTC_WWE_1_72_405_2_R-1_34_405_5_P_release_163499w0m1z3ghgttstsll.zip

TheSilence said:
when i turn signature verification off i get the following error:
script aborted: assert failed: getprop("ro.cid") == "00000000" ||
Click to expand...
Click to collapse
Same error but with Desire HD. I've replaced stock rom, update still not possible

I agree.. stock ota updates are hardly ever good. Cyanogenmod and others will be updated WAY before 2.3 gingerbread will be pushed ota. Most uptates my ota verizon friends get take superuser from them. Making them reroot all over again. Big brother bad.... sorry.
Sent from my HTC G2 CM6.1.1 free your phone

[Q] Deroot wildfire

Good morning.
I root a wildfire fastweb branded (i'm from italy).
I want to return to the original rom (for warranty). I can't find on the web the original ruu fastweb, but i find the ota fastweb update to froyo. But when i try to update it i have this error:
Code:
-- Install from sdcard...
I:Set boot command "[email protected] recovery "
Finding update package...
I:Update location: SDCARD:update.zip
Opening update package...
I:Update file path: /sdcard/update.zip
Installing update...
I:Trying update-binary.
script aborted: assert failed: getprop("ro.cid") == "00000000" ||
getprop("ro.cid") == "11111111" || getprop("ro.cid") == "22222222" ||
getprop("ro.cid") == "33333333" || getprop("ro.cid") == "44444444" ||
getprop("ro.cid") == "55555555" || getprop("ro.cid") == "66666666" ||
getprop("ro.cid") == "77777777" || getprop("ro.cid") == "88888888" ||
getprop("ro.cid") == "99999999" ||
getprop("ro.cid") == "FASTW401"
assert failed: getprop("ro.cid") == "00000000" || getprop("ro.cid") == "11111111" || getprop("ro.cid") == "22222222" || getprop("ro.cid") == "33333333" || getprop("ro.cid") == "44444444" || getprop("ro.cid") == "55555555" || getprop("ro.cid") == "66666666" || getprop("ro.cid") == "77777777" || getprop("ro.cid") == "88888888" || getprop("ro.cid") == "99999999" || getprop("ro.cid") == "FASTW401"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
I:Set boot command ""
Can you help me?
Thank you

Try to find a ruu not fastweb that will work
Sent from my HTC Wildfire using XDA App

OTA_Marvel_S_HTC_Europe_2.14.401.1-2.13.401.3_release_246828

http://fotadl.htc.com/OTA_Marvel_S_HTC_Europe_2.14.401.1-2.13.401.3_release_246828bqvnfs0scxz4qj5d.zip
Warning:
ZergRush exploit doesn't work anymore. The vulnerability has been fixed.
[-] Hellions with BLUE flames !
But it is still rootable by CWM&root.zip.
(in CWM) If you get the ro.cid error, just remove these lines from OTA_Marvel_S_HTC_Europe_2.14.401.1-2.13.401.3_release_246828bqvnfs0scxz4qj5d.zip\META-INF\com\google\android\updater-script:
Code:
assert(file_getprop("/system/build.prop", "ro.build.fingerprint") == "htc_europe/htc_marvel/marvel:2.3.5/GRJ90/197017.3:user/release-keys" ||
file_getprop("/system/build.prop", "ro.build.fingerprint") == "htc_europe/htc_marvel/marvel:2.3.5/GRJ90/202358.1:user/release-keys");
assert(check_cid(getprop("ro.cid"), "00000000" , "11111111" ,
"22222222" , "33333333" , "44444444" , "55555555" , "66666666" ,
"77777777" , "88888888" , "99999999" , "HTC__001" , "HTC__N34" ,
"HTC__203" , "HTC__102" , "HTC__405" , "HTC__Y13" , "HTC__A07" ,
"HTC__304" , "HTC__032" , "HTC__016" ,
"HTC__E11") == "t");
ifelse( is_ship_bootloader(getprop("ro.bootloader")) == "t" ,
assert(check_mid("full", "PG7610000") == "t");,
assert(check_mid("simple", "PG7610000") == "t");
);
assert(getprop("ro.product.device") == "marvel" ||
getprop("ro.build.product") == "marvel");

I'm on 2.13.401.3, too. Seems this is a revised version if zergRush does not work any more.

[Q][MODEM]CWM update fails

Hi!
I've created CWM installable ZIP which updates only modem.
Updater script is following:
Code:
assert(getprop("ro.product.device") == "serranolte" || getprop("ro.build.product") == "serranolte" ||
getprop("ro.product.device") == "serranoltexx" || getprop("ro.build.product") == "serranoltexx" ||
getprop("ro.product.device") == "i9195" || getprop("ro.build.product") == "i9195" ||
getprop("ro.product.device") == "GT-I9195" || getprop("ro.build.product") == "GT-I9195");
ui_print("------------------------------------------------------");
show_progress(0.100000, 0);
ui_print("GT-I9195XXUBMJ7 modem update - by LackoGyerek");
assert(package_extract_file("modem.bin", "/tmp/modem.bin"),
show_progress(0.100000, 50);
write_raw_image("/tmp/modem.bin", "/dev/block/platform/msm_sdcc.1/by-name/modem"),
delete("/tmp/modem.bin"));
show_progress(0.100000, 100);
ui_print("Done!");
ui_print("------------------------------------------------------");
But unfortunately the script fails at the assert(package_extract_file()) line...
Download the whole update package here.
Can anybody check it and find out, what is wrong?
Note: Modem binary is taken form latest GT-I9195XXUBMJ7 official firmware. I only renamed the NON-HLOS.bin to modem.bin.

ladislav.heller said:
Hi!
I've created CWM installable ZIP which updates only modem.
Updater script is following:
Code:
assert(getprop("ro.product.device") == "serranolte" || getprop("ro.build.product") == "serranolte" ||
getprop("ro.product.device") == "serranoltexx" || getprop("ro.build.product") == "serranoltexx" ||
getprop("ro.product.device") == "i9195" || getprop("ro.build.product") == "i9195" ||
getprop("ro.product.device") == "GT-I9195" || getprop("ro.build.product") == "GT-I9195");
ui_print("------------------------------------------------------");
show_progress(0.100000, 0);
ui_print("GT-I9195XXUBMJ7 modem update - by LackoGyerek");
assert(package_extract_file("modem.bin", "/tmp/modem.bin"),
show_progress(0.100000, 50);
write_raw_image("/tmp/modem.bin", "/dev/block/platform/msm_sdcc.1/by-name/modem"),
delete("/tmp/modem.bin"));
show_progress(0.100000, 100);
ui_print("Done!");
ui_print("------------------------------------------------------");
But unfortunately the script fails at the assert(package_extract_file()) line...
Download the whole update package here.
Can anybody check it and find out, what is wrong?
Note: Modem binary is taken form latest GT-I9195XXUBMJ7 official firmware. I only renamed the NON-HLOS.bin to modem.bin.
Click to expand...
Click to collapse
Try attached updater binary

citymen34 said:
Try attached updater binary
Click to expand...
Click to collapse
The same error. Message is following:
Code:
assert failed: write_raw_image("/tmp/modem.bin", "/dev/block/platform/msm_sdcc.1/by-name/modem")
E:Error in /external_sd/Install/Temp/CWM_I9195XXUAMJ1_modem.zip
(Status 7)
Installation aborted.

ladislav.heller said:
The same error. Message is following:
Code:
assert failed: write_raw_image("/tmp/modem.bin", "/dev/block/platform/msm_sdcc.1/by-name/modem")
E:Error in /external_sd/Install/Temp/CWM_I9195XXUAMJ1_modem.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
try
package_extract_file("modem.bin", "/dev/block/platform/msm_sdcc.1/by-name/modem");
or
package_extract_file("modem.bin", "/dev/block/mmcblk0p1");

If You see on Log by MobileOdin attached the partition from modem is like this:
/dev/block/platform/msm_sdcc.1/by-name/modem /firmware vfat
See also the ScreenShot by DiskInfo.
If You replace /modem by /firmware may be... work. Like the /efs, like the /system... (and is a vfat file, not a ext4).

Now the modem /firmware is a Filesystem
Filesystem Size Used Free Blksize
/system 1.46G 1.37G 95.1M 4096
/data 5.42G 455M 4.97G 4096
/cache 196M 4.20M 192M 4096
/persist 7.88M 4.04M 3.85M 4096
/efs 13.4M 4.16M 9.26M 4096
/firmware 64.0M 47.3M 16.7M 16384
/mnt/shell/container 5.40G 455M 4.95G 4096
May by like /system:
run_program("/sbin/busybox", "mount", "/system");
package_extract_dir("system", "/system");
For /modem /firmware:
run_program("/sbin/busybox", "mount", "/firmware");
package_extract_dir("NON_HLOS", "/firmware"); --> _dir because we have /firmware/image/...many files.
Or something same this.

[Q] Can't install AGNI kernel - assert failed... confused!

Hi,
Got a weird problem with my Note 2 GT-N7105 when trying to install the latest AGNI kernel (version 4.3.7) as it's coming up with an assert error when trying to detect my device. I have tried this from both philz and mobile odin both do the same thing. I studied the error message and it seemed it wasn't able to detect my device as an N7105 when that is exactly what I have.
I have attached a screenshot of my about page to show that's what I have.
So I edited the updater-script file first by removing the assert statement which also didn't work it just failed later on, and then by adding the following code to the beginning of the file so it would output what it's detecting my device as:
Code:
ui_print("ro.product.device is: ", getprop("ro.product.device"));
ui_print("ro.build.product is: ", getprop("ro.build.product"));
Strangely it detected my device as t03g which of course isn't in the assert list:
Code:
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : AGNi pureSTOCK Kernel
ROM Version : v4.3.7 (STOCK 4.4.x)
ROM Author : [email protected]
Device : GT-N7105 SAMSUNG Galaxy Note II
Start at : Fri Feb 6 00:36:58 2015
Warning: No file_contexts
ro.product.device is: t03g
ro.build.product is: t03g
script aborted: assert failed: getprop("ro.product.device") == "t0lte" || getprop("ro.build.product") == "t0lte" ||
getprop("ro.product.device") == "t0ltexx" || getprop("ro.build.product") == "t0ltexx" ||
getprop("ro.product.device") == "GT-N7105" || getprop("ro.build.product") == "GT-N7105" ||
getprop("ro.product.device") == "t0ltedv" || getprop("ro.build.product") == "t0ltedv" ||
getprop("ro.product.device") == "GT-N7105T" || getprop("ro.build.product") == "GT-N7105T" ||
getprop("ro.product.device") == "t0lteatt" || getprop("ro.build.product") == "t0lteatt" ||
getprop("ro.product.device") == "SGH-I317" || getprop("ro.build.product") == "SGH-I317" ||
getprop("ro.product.device") == "t0ltetmo" || getprop("ro.build.product") == "t0ltetmo" ||
getprop("ro.product.device") == "SGH-T889" || getprop("ro.build.product") == "SGH-T889" ||
getprop("ro.product.device") == "t0ltecan" || getprop("ro.build.product") == "t0ltecan" ||
getprop("ro.product.device") == "t0ltevl" || getprop("ro.build.product") == "t0ltevl" ||
getprop("ro.product.device") == "t0ltevzw" || getprop("ro.build.product") == "t0ltevzw" ||
getprop("ro.product.device") == "SCH-I605" || getprop("ro.build.product") == "SCH-I605" ||
getprop("ro.product.device") == "SGH-I317M" || getprop("ro.build.product") == "SGH-I317M"
assert failed: getprop("ro.product.device") == "t0lte" || getprop("ro.build.product") == "t0lte" ||
getprop("ro.product.device") == "t0ltexx" || getprop("ro.build.product") == "t0ltexx" ||
getprop("ro.product.device") == "GT-N7105" || getprop("ro.build.product") == "GT-N7105" ||
getprop("ro.product.device") == "t0ltedv" || getprop("ro.build.product") == "t0ltedv" ||
getprop("ro.product.device") == "GT-N7105T" || getprop("ro.build.product") == "GT-N7105T" ||
getprop("ro.product.device") == "t0lteatt" || getprop("ro.build.product") == "t0lteatt" ||
getprop("ro.product.device") == "SGH-I317" || getprop("ro.build.product") == "SGH-I317" ||
getprop("ro.product.device") == "t0ltetmo" || getprop("ro.build.product") == "t0ltetmo" ||
getprop("ro.product.device") == "SGH-T889" || getprop("ro.build.product") == "SGH-T889" ||
getprop("ro.product.device") == "t0ltecan" || getprop("ro.build.product") == "t0ltecan" ||
getprop("ro.product.device") == "t0ltevl" || getprop("ro.build.product") == "t0ltevl" ||
getprop("ro.product.device") == "t0ltevzw" || getprop("ro.build.product") == "t0ltevzw" ||
getprop("ro.product.device") == "SCH-I605" || getprop("ro.build.product") == "SCH-I605" ||
getprop("ro.product.device") == "SGH-I317M" || getprop("ro.build.product") == "SGH-I317M"
Installer Error (Status 7)
End at : Fri Feb 6 00:36:58 2015
Can anyone explain what's going on? How is it my device being an N7105 is showing up as an N7100 from that script? I'm assuming I can just install AGNI over the top of the samsung stock rom? (I don't want a custom rom, I only really want the boefla sound enhancements provided by that kernel so I can increase the headphone volume). Or do I need a custom rom before this will work? Or is it something else entirely?
Thanks