Will this fit the Vibrant? it is made for the i9000.
shop.momax.net/files/full/3344_0.jpg
wilee1928 said:
Will this fit the Vibrant? it is made for the i9000.
shop.momax.net/files/full/3344_0.jpg
Click to expand...
Click to collapse
What material is that? My TPU flexi case was made for the i9000 but fits my vibrant perfectly. Im not sure about a hard shell though.
jrharvey said:
What material is that? My TPU flexi case was made for the i9000 but fits my vibrant perfectly. Im not sure about a hard shell though.
Click to expand...
Click to collapse
the description says "Shock-adsorbing rubber edge & transparent plastic back".
shop.momax.net/index.php?p=6&id=3344&new=&cat2=620&cat1=99&cat0=38&lang=en#
wilee1928 said:
the description says "Shock-adsorbing rubber edge & transparent plastic back".
shop.momax.net/index.php?p=6&id=3344&new=&cat2=620&cat1=99&cat0=38&lang=en#
Click to expand...
Click to collapse
looks exactly like the hybrid cases found here: best case in the WORLD except with the Momax label. You can get it here: http://cgi.ebay.com/Black-Hybrid-Flexi-Skin-Cover-Samsung-Vibrant-T959-/310246275856?pt=PDA_Accessories&hash=item483c1e7b10
After looking at the Momax website, I'm convinced this is the same case as the one mentioned in the thread above (TPU hybrid), just with the company labeling. if you want one that will fit the vibrant just get the TPU hybrid from eBay in the link above...it's a GREAT case.
Thanks men!
Does anyone have any experience with a larger leather case for the Vibrant that will accommodate the added bulk of a hard/silicone case? None of the leather cases I can see on Ebay have any indication of fitting a cased Vibrant.
This one that I bought fits my Vibrant perfectly with a gel case on. I've also tested it with a Body Glove.
There is still a bit of room with the gel case and Body Glove, so I'm betting thicker cases would be ok too.
http://www.amazon.com/gp/product/B002Q4AJR2
This would NOT be good to use with a naked Vibrant.
tekkguy said:
This one that I bought fits my Vibrant perfectly with a gel case on. I've also tested it with a Body Glove.
There is still a bit of room with the gel case and Body Glove, so I'm betting thicker cases would be ok too.
http://www.amazon.com/gp/product/B002Q4AJR2
This would NOT be good to use with a naked Vibrant.
Click to expand...
Click to collapse
Hey thanks! Definitely going to try that out.
I was looking for a good belt case.
Seidio innocase is the best the market but they have not brought one out yet.
Hopefully they will bring one out , considering the popularity of this device.
Here is an example i am talking about
http://www.seidioonline.com/product-p/hlssvbrasc.htm
What is everyone using for belt. I like somthing that will clip on
My old case (previously for G1 and G8) is a nice fit for the GS2, it's Naztech Sahara.
However I have a cover on my GS2 so it no longer fits. The case I am after is Nite Ize Clip Case Sideways in Large part number CCSL-03-01, if i can get one shipped here at a good price.
I've used PDAir cases for years on my phones. They have a line for the SGS2.
http://www.pdair.com/catalog/index.php?cPath=10100000_10000000_11001206
I bought the horizontal pouch and a gel and both fit perfectly. Although the gel has a cut out on the right top corner for the Korean versions TV antenna. It doesn't bother me though.
BarryH_GEG said:
I bought the horizontal pouch and a gel and both fit perfectly. Although the gel has a cut out on the right top corner for the Korean versions TV antenna. It doesn't bother me though.
Click to expand...
Click to collapse
Does the phone fit in the horizontal case with the Gel on the phone? I'm looking for a horizontal belt case and this PDAir one seems the best but I would like to have a thin matte or gel case on the phone as I found the phone quite slippery and easy to drop. T%he one I'm looking at is the "Leather Case for Samsung Galaxy S II GT-i9100 - Horizontal Pouch Type (Black)" from your link, is this the one you purchased?
This is the one that I finally ordered. Will review it once it gets here.
http://cgi.ebay.com/Leather-Case-Co...Accessories&hash=item43a7ed82e7#ht_965wt_1158
drgopoos said:
This is the one that I finally ordered. Will review it once it gets here.
Click to expand...
Click to collapse
Looks interesting but one thing I should have mentioned I'm looking for is that the headphone jack should be accessible while in the case. The one you posted looks like it would be covered? Regardless, looking forward to the review and thanks for posting the link.
BarryH_GEG said:
I've used PDAir cases for years on my phones. They have a line for the SGS2.
http://www.pdair.com/catalog/index.php?cPath=10100000_10000000_11001206
I bought the horizontal pouch and a gel and both fit perfectly. Although the gel has a cut out on the right top corner for the Korean versions TV antenna. It doesn't bother me though.
Click to expand...
Click to collapse
Agree. The PDAir cases are well finished and have already released their line of cases for the SG2. Another advantage is that their vertical belt case has the belt clip permanently attached to the case. It's a lot more reassuring knowing that it won't come off or unhook when brushed against.
I've been reading complaints regarding various cases not fitting too snuggly on their GS2's as they're made for the Korean version of the phone, which has a thicker width overall.
So are there any buyers out there who have purchased a case that fits the International version of the Galaxy s2 perfectly? A link and a photo is much appreciated.
chobie said:
I've been reading complaints regarding various cases not fitting too snuggly on their GS2's as they're made for the Korean version of the phone, which has a thicker width overall.
So are there any buyers out there who have purchased a case that fits the International version of the Galaxy s2 perfectly? A link and a photo is much appreciated.
Click to expand...
Click to collapse
I have this one. It feels like it fits really well! It is tight to put on and take off. However, I don't use it anymore because this phone is too sexy and thin to have a case
http://www.amazon.com/gp/product/B00513HV62
oh, and it ships from the US which is nice if you life in the US.
chobie said:
I've been reading complaints regarding various cases not fitting too snuggly on their GS2's as they're made for the Korean version of the phone, which has a thicker width overall.
So are there any buyers out there who have purchased a case that fits the International version of the Galaxy s2 perfectly? A link and a photo is much appreciated.
Click to expand...
Click to collapse
case mate gelly case is made for the international galaxy s2..fits perfectly..
http://cgi.ebay.co.uk/CASE-MATE-CLE..._MobilePhonesCasesPouches&hash=item2eb521c216
I use this case.. http://cgi.ebay.com/Black-Fusion-Sa...ps=63&clkid=881133855791952597#ht_1703wt_1139
Right now.. Until I get my Otterbox Commuter. I have to say this case of of amazing quality and is a perfect fit. It does have a raised rim around the screen that protects it. I highly recommend this case.
Thanks for the input guys.
Anyone knows though if the Pleomax cases would fit the international version?
Hello all,
As i'm sure some of you have been trying to find a case that fits the 2000mah kit from Samsung and having a lot of trouble? well being a case whore i'm building a collective list of cases which do or do not fit, if you have any info please PM me and i'll add your results to the list, please PM fitting and non fitting cases, but please CTRL+F and search for the case your going to PM me incase it's already on the list. without further ado;
DOES FIT
[CM014056] Case-Mate Tough (However it is very tight, and ideally need the rear rubber being trimmed OR removed back cover)
[CM015699] Case-Mate Safe skin (Fits but has a loose area below camera)
[EF-C1A2B*EC] Samsung Galaxy S2 Flip Cover (Rear side cut out around battery cover, perfect fit)
[EF-CA12P] Samsung Leather Pouch Case (Tight but fits, some screen protectors may dislodge)
[Not Known] Samsung D30 Galaxy S II Leather Slip Case (Tight but fits, some screen protectors may dislodge)
[EF-C1A2LBEC] Samsung Galaxy S II Leather Pouch Case (Fits fine)
[Not Known] SGP Samsung Galaxy S2 Case Neo Hybrid EX (Fits fine)
[Not Known] SGP Linear Series (Fits)
[Not Known] SGP Samsung Galaxy S2 Case Neo Hybrid (Fits but has a loose area below camera)
[Not Known] SGP Neo Ultra capsule (Fits)
[F8M136EBC00] Belkin Samsung Galaxy Swell Grip Graphix (Fits but loose around camera area)
[Not Known] Nillkin TPU (Nearly Perfect)
[SAM4-I9100-20-E4OTR_A] Otterbox Commuter for Galaxy S2 (Fits, slightly loose area above the extended battery cover)
[ICPSAI9100D1D] i Case Pro (Fits)
[Not Known] Aeonaz POLARBEAR (Light modification required)
[Not Known] Zenus Air Jacket
[3BSSGXF41] PDair Leather Case Flip Type
[Not Known] Rearth Ringke Case
[CM014641] Case-Mate Pop Case
DOES NOT FIT
[CM014048] Case-Mate Barely There Case (Will not clip on at all)
[SAMGS2CCBL] Samsung Genuine Mesh Vent Case (Will no clip on at all)
[EEB-U20BBUG] Samsung S2 Power Pack (Cannot align usb connector without damage)
[EF-GS2L] Samsung Moulded Leather Flip Case (clips cannot stretch to phone body due to moulded back)
Some pics would be realy realy nice, so everybody could see how it fits and if they could get used to it.
EDIT: Also you can add the SGP Neo Hybrid and SGP Neo Hybrid EX to the list. First one has a loose are around the camera (as seen in another thread) and the other one fits nicely.
I would put some pictures up but I don't own all of them, and a few I've checked out in Retail stores, however If I buy any that fit, i'll make sure I post up photos of the fit.
Then just put the pictures in you own. Some others who have the extended battery and a case could send you their pictures and you could implement them into your post.
When I get my S2, 2000 mAh battery and decided for a case i will do some pictures for you, too.
PS: You could link every name of the cases to their official pages, too.
Here are some:
SGP Neo Hybrid EX: sgpstore.com/cell-phone/samsung/galaxy-s2/sgp-samsung-galaxy-s2-case-neo-hybrid-ex-series.html
SGP Neo Hybrid: sgpstore.com/cell-phone/samsung/galaxy-s2/sgp-samsung-galaxy-s2-case-neo-hybrid-series.html
Case-Mate Tough: case-mate.com/Samsung-Galaxy-S-II-Cases/Case-Mate-Samsung-Galaxy-S-II-Tough-Cases.asp
Case-Mate Barely There: case-mate.com/Samsung-Galaxy-S-II-Cases/Case-Mate-Samsung-Galaxy-S-II-Barely-There-Cases.asp
Hope I can help improving your thread I think your thread can help very many people.
Would love to know about the Otterbox Commuter compatibility.
anyone tried with casemate pop? might as well getting 2000mah battery rather than getting another spare samsung ori battery if pop case fits well
jytow0716 said:
anyone tried with casemate pop? might as well getting 2000mah battery rather than getting another spare samsung ori battery if pop case fits well
Click to expand...
Click to collapse
I've tried it and sad to say it just wouldn't fit
Add nilkin tpu..almost perfect fit
Sent from my GT-I9100 using xda premium
What about this Case:
- Belkin Grip Graphix Swell Does it fit?
would really like to find out if the pleomax casing able to fit?
zOunda said:
What about this Case:
- Belkin Grip Graphix Swell Does it fit?
Click to expand...
Click to collapse
Hi all!
Yes, as most soft cases the Graphix fits, but you'll see some looseness in the camera section. Also, I did not like the grip of this case at all, it felt slippery imo.
I went for the Neon hybrid instead, very satisfied.
How tight is the fit on the Case Mate Tough case with the 2000mah battery? I like the look of it and just placed an order for it. Is it so tight that there's a risk of damaging the phone?
Zenus Skin Air Jacket
Just got the new battery and put it in my Zenus Skin Air Jacket... dont know what to say... sadly it doesnt fit... but its useable.
The edge of the phone comes out a bit and therefore the access to the volume and powerbutton is limited.
I made some photos but cant post the links due lack of postcount
The Walnutt bumper fits for sure, but hell, it it even fits my Momax 2700mah Expower batts, so that's a moot point.
I am within the M25 and have an otterbox for my S2 if you need to try it then pm me.
what is the sense of using a bumper of a sgp neo hybrid ?
i mean, isnt the purpose of a case to cover the whole phone? both the examples above mentioned appear to just cover the borders of the phone, leaving uncovered the whole back of it.
actually sgp neo hybrid series sounds just like a overpriced bumper.
anyone, can prove the opposite?
actually i am very interested in this because it looks like there is no real hard non/bumper case fitting with the new battery: and the only (crappy) solutions appear to be either bumpers or gum/rubber cases ...
sooby77 said:
How tight is the fit on the Case Mate Tough case with the 2000mah battery? I like the look of it and just placed an order for it. Is it so tight that there's a risk of damaging the phone?
Click to expand...
Click to collapse
IT fits but the rubber part is under a small amount of pressure, pushing the phone out of the hard plastic casing. it is MINIMAL, if your like me and fiddle with your phone all the time, it is just a case of pushing it with the lightest touch back in.
It won't damage the phone unless your trying the impossible (pushing the phone into the bottom cutout.) and pushing so hard you crack the hard plastic shell in otherwords impossible. the ideal would be to cut the rubber out in the shape of the battery lid compartment. on the rubber part, then assembling with the hard casing. so you remove the tension off the added thickness.
if I have a hybrid neo spg .... and put the battery without the back cover ... only with the case spg ... looks good? or can cause problems? (Sorry for my English)
Enviado desde mi GT-I9100 usando Tapatalk
diablous said:
IT fits but the rubber part is under a small amount of pressure, pushing the phone out of the hard plastic casing. it is MINIMAL, if your like me and fiddle with your phone all the time, it is just a case of pushing it with the lightest touch back in.
It won't damage the phone unless your trying the impossible (pushing the phone into the bottom cutout.) and pushing so hard you crack the hard plastic shell in otherwords impossible. the ideal would be to cut the rubber out in the shape of the battery lid compartment. on the rubber part, then assembling with the hard casing. so you remove the tension off the added thickness.
Click to expand...
Click to collapse
Cool. Thanks for the detailed description. I hate to mangle new case, but I may have to do that. Wonder if cutting out the battery compartment rubber part may reduce shock resistance of the case.
Can anyone tell me if it will fit in the Samsung Leather Pouch?
If not are there any other 'pouch' style cases that will?
thanks