Develop Bugs

Updated radio issue - phone not booting

I had success with the unrevoked root, so I decided to give the 2.2 upgrade a shot. I successfully reverted to a fresh stock unrooted 2.1, using the PB31IMG.zip file. This also took away my Clockwork Mod. Next I moved to the step of loading the dinc_ota.zip. After the 3 cycles it went to the HTC incredible boot screen and didnt move. I waited 15 minutes and nothing changed. I decided to pull the battery but no luck, still hangs on the white screen when i turn the phone on. I can still get into HBoot, which shows my radio as the updated 2.05 and my hboot is .79.
I've tried the RUU but I cannot boot the phone past the white htc screen so it wont work. I've also tried to load the PB31IMG.zip file from the sdcard agian, which doesnt. I get an error saying its too old.
Is there a way to restore my phone from Hboot?
Do you have any suggestions of threads I could read for the answer?
Thanks

Try the image again, then try the ota.
Sent from my ADR6300 using XDA App

i would not try the radio update again, that's pretty much a sure fire way to brick. I would wait for the opinions of others first.
PB31IMG.zip doesn't roll the radio back does it? It reverts to stock recovery and ROM, but does it roll the radio back too?
I thought you had to follows this to roll the radio back, http://androidforums.com/all-things...16-how-revert-back-earlier-version-hboot.html

k_flan said:
i would not try the radio update again, that's pretty much a sure fire way to brick. I would wait for the opinions of others first.
PB31IMG.zip doesn't roll the radio back does it? It reverts to stock recovery and ROM, but does it roll the radio back too?
I thought you had to follows this to roll the radio back, http://androidforums.com/all-things...16-how-revert-back-earlier-version-hboot.html
Click to expand...
Click to collapse
Sorry, my bad. DONT APPLY THE UPDATE AGAIN!
Sent from my ADR6300 using XDA App

Try a clear storage.

jdkoreclipse said:
Try the image again, then try the ota.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I tried the image again, same error, it reads:
Main Version is older!
Update Fail!
Do you want to reboot device?
vol up yes
vol down no
I tried the reboot and it still hangs at white screen.
k_flan said:
i would not try the radio update again, that's pretty much a sure fire way to brick. I would wait for the opinions of others first.
PB31IMG.zip doesn't roll the radio back does it? It reverts to stock recovery and ROM, but does it roll the radio back too?
I thought you had to follows this to roll the radio back, http://androidforums.com/all-things...16-how-revert-back-earlier-version-hboot.html
Click to expand...
Click to collapse
As for the radio update, I agree that it would be a bad idea to try to reaplly it, especially since my HBoot shows it as the updated radio.
I also saw the thread you pointed out to me but that requires clockwork mod to be installed and that was removed when i reverted to stock.
Any helpful ideas are greatly appreciated.

Does it show up on adb?
Sent from my ADR6300 using XDA App

jdkoreclipse said:
Does it show up on adb?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I did try to clear the storage, but it still hangs.
Also tried adb devices in hboot, at the htc incredible white screen, and in the fastboot menu, all with no luck. When I try to boot to recovery it hangs at the same white screen. Might just have to bring it to Verizon tomorrow, I'm beginning to think I may be holding a brick.

To revert your radio back to the original 1.x, you need to have access to adb and pushing to your data directory
Long story short, you dun goofed by pulling the battery
HTC Incredible, rooted w/ modified Sense 2.1

I think its a brick
Sent from my ADR6300 using XDA App

ilinfinityil said:
To revert your radio back to the original 1.x, you need to have access to adb and pushing to your data directory
Long story short, you dun goofed by pulling the battery
HTC Incredible, rooted w/ modified Sense 2.1
Click to expand...
Click to collapse
Once the radio update completed, the white htc inc screen came up and hung there for 15 minutes, I didnt think I had much of a choice.
In that situation what should I have done?

aaman137 said:
Once the radio update completed, the white htc inc screen came up and hung there for 15 minutes, I didnt think I had much of a choice.
In that situation what should I have done?
Click to expand...
Click to collapse
When i did the ota, it took about 7-10 min total. Yours hung on that incredible boot screen for 15 min. You did the right thing.
Sent from my ADR6300 using XDA App

I appreciate all the help, this is why I came to xda. As for my Incredible, I guess its going back to Verizon tomorrow to see what they can do for me. I'm sure I'll be waiting a good week or two until I have my Incredible back, DOH!

I wouldn't think it's bricked if you can still get into the bootloader. Bricked generally comes about when you can't even power the device on. While I have nothing to add in the way of help, I'd say don't give up on the phone yet. I'm betting one of the *real* devs may be able to help you.

Ruoh said:
I wouldn't think it's bricked if you can still get into the bootloader. Bricked generally comes about when you can't even power the device on. While I have nothing to add in the way of help, I'd say don't give up on the phone yet. I'm betting one of the *real* devs may be able to help you.
Click to expand...
Click to collapse
It may be a soft brick.
Sent from my ADR6300 using XDA App

i brick it this morning, called around dinner time, and they dispatched a replacement to me. overnight free shipping!!!

Its not bricked. I had the same issue. You need to follow this guide. Basically you have to redo it to get it to work, and this is the only way that I could do it.
http://androidforums.com/all-things...16-how-revert-back-earlier-version-hboot.html
(This was the most important part of the guide for me. Solve that: error saying its too old. All glory to Adrynalyne)
Having troubles with the RUU giving connection errors? Do this.
Go to start, and in the search/run box, type
%temp%
Delete all that you can. Make sure the RUU is not running in the background.
Now run the RUU again. Once it starts to the first screen, it has extracted the files to the temp directory. You can then copy them to a safe place. It will be a long winded numbered folder, with a similar subfolder.
Once you have copied it to a safe place, you can then copy adb.exe, fastboot.exe, and adbwinapi.dll from the latest SDK into it, overwriting the older copies. Then start the RUU by executing ARUWizard.exe. This fixed the problem for me.
You can also rename the rom.zip contained within the extracted files to PB31IMG.zip and put it on your sd card. Booting to HBOOT will scan it and offer to install.

HolyGrail said:
Its not bricked. I had the same issue. You need to follow this guide. Basically you have to redo it to get it to work, and this is the only way that I could do it.
http://androidforums.com/all-things...16-how-revert-back-earlier-version-hboot.html
(This was the most important part of the guide for me. Solve that: error saying its too old. All glory to Adrynalyne)
Having troubles with the RUU giving connection errors? Do this.
Go to start, and in the search/run box, type
%temp%
Delete all that you can. Make sure the RUU is not running in the background.
Now run the RUU again. Once it starts to the first screen, it has extracted the files to the temp directory. You can then copy them to a safe place. It will be a long winded numbered folder, with a similar subfolder.
Once you have copied it to a safe place, you can then copy adb.exe, fastboot.exe, and adbwinapi.dll from the latest SDK into it, overwriting the older copies. Then start the RUU by executing ARUWizard.exe. This fixed the problem for me.
You can also rename the rom.zip contained within the extracted files to PB31IMG.zip and put it on your sd card. Booting to HBOOT will scan it and offer to install.
Click to expand...
Click to collapse
This only works if he can get to recovery.

TNS201 said:
This only works if he can get to recovery.
Click to expand...
Click to collapse
Your point? He can get into stock recovery, which is all he needs to start over.

HolyGrail said:
Your point? He can get into stock recovery, which is all he needs to start over.
Click to expand...
Click to collapse
His tutorial says you need clockwork, so he might not be ok. You need the ability to push files to your data directory which is why he needs clockwork, unless he can do it the old way when we first got root by the time attack method. I do not know how much functionality adb would have if he was able to access ADB with stock recovery.
This is all his fault for his failure to read. From what I read in the OP, he did this
1. He downgraded with the RUU image.
2. He tried to apply the OTA
He failed to do this or at least didn't acknowledge that he did this, but he didn't install the original OTA which you will get after you RUU back to stock. If you boot your phone back up it should download the OTA from VZW and then you apply the leaked OTA. So sounds like this is the reason for his brick/semi-brick. Failure to read or understand what youre doing leads to FAIL>

major problem. Need some help. Loopbooting

So I'm at work and go to look at my phone and notice its rebooting which it never does. I watch it and notice its loopbooting at the white Evo screen. Ive never as much as had a random reboot before. I try to boot into recovery and can get to hboot but as soon as I try to select recovery it loop boots at the same point. I tried pulling the battery and that didn't help either. I'm running cm6.1 rc1 with stock kernel and no over or under clocking. I haven't made any changes in a while. Not even any new apps.
Any ideas?

I just went through and read every thread with loop in the title and it seems like with everyone else they had this issue while rooting or flashing or making some sort of change. Nor just on an idle phone

You may need to RUU your phone and start over if you arent able to get into any type of recovery mode...
Sent from my froyo using the xda app

I can get into hboot but that's about it

Just got home finally.. Gonna try to get this bs fixed. I wish I knew what caused it. I can't have this randomly happening again.

I was able to run RUU app and install the update from here;
http://forum.xda-developers.com/showthread.php?t=747319
It just finished and I'm still in a boot loop. Ugh.
I've been searching for hours now and I'm not finding much help

Ugh.. I'm giving up for the night. Been searching for hours and can't find anything that seems to work. And of course today is Thanksgiving and there's no chance of me even getting a new phone.

did you try a 3.29 ruu i'm surprised that sync let you flash a 3.26 if your phone updated to newer that might help also if you used unrevoked you need to flash thier s-on tool

Jbcarrera said:
did you try a 3.29 ruu i'm surprised that sync let you flash a 3.26 if your phone updated to newer that might help also if you used unrevoked you need to flash thier s-on tool
Click to expand...
Click to collapse
The only RUU I was able to flash with the RUU app was the 3.26 one I posted. I downloaded like 10 others and RUU app doesn't see them for some reason.
Also, how can I send a file to the phone with fastboot? I've searched and searched and I'm not sure of the exact syntax to use.
I had S-OFF and was fully rooted untill I ran RUU app.

Any other suggestions? I'm really trying to avoid getting a new phone.

Grabbed a card reader and adapter and trying some other RUU's I found now.. Hopefully something works.

thenags said:
Grabbed a card reader and adapter and trying some other RUU's I found now.. Hopefully something works.
Click to expand...
Click to collapse
i was going to suggest that but you beat me to it have been away all day

thenags said:
Any other suggestions? I'm really trying to avoid getting a new phone.
Click to expand...
Click to collapse
Jbcarrera said:
i was going to suggest that but you beat me to it have been away all day
Click to expand...
Click to collapse
Right now I'm just downloading another RUU to use with RUUApp. Do you have any other suggestions if this doesn't work?
Attempting the .exe found here;
http://forum.xda-developers.com/showthread.php?t=819771&highlight=mirror&page=3

thenags said:
Right now I'm just downloading another RUU to use with RUUApp. Do you have any other suggestions if this doesn't work?
Attempting the .exe found here;
http://forum.xda-developers.com/showthread.php?t=819771&highlight=mirror&page=3
Click to expand...
Click to collapse
Just finished installing that RUU and no change. Still the same boot loop.

Downloading the following RUU now and going to try again.
RUU_SuperSonic_S_Sprint_WWE_3.30.651.3_Radio_2.15.00.09.01_NV_1.77_003_release_157088_signed.exe
And for anyone looking for stock RUU's and having a hell of a time. Here's a good link I found with a bunch of them;
http://shipped-roms.com/shipped/Supersonic/

That one didn't work either.. Still just loop booting. Looks like this thing is just completely eff'd and I need a new one. Damn.

Well, just got home with a brand new phone. It's got hboot 2.20.. Time to get rooting. Ugh.

Just search for a pc3600.img file that is rooted and put on sd and boot to bootloader and flash
sent from my white w/ red trim Evo

krazydude4g said:
Just search for a pc3600.img file that is rooted and put on sd and boot to bootloader and flash
sent from my white w/ red trim Evo
Click to expand...
Click to collapse
I did that as well.. Nothing was working on that thing. Got a new phone now and just finished rooting it and getting it all set up.

Semi-bricked Incredible?

So I flashed Skyraider tonight, wiped data, installed the ROM, and booted up the phone. I was halfway through setting up my Google account when the phone froze and rebooted. Except, it didn't boot back up. It did the "vibrate five times and flash the LED" thing. Didn't think it was a big deal, so I pulled the battery, tried to boot it back up. But it does the same thing.
I can get into the hboot menu, and if the phone is plugged into the computer, it'll boot up into Skyraider, but it can't read the SD card or the internal storage. So, essentially, a pretty screwy phone. I also cannot boot back into recovery. It just does the vibrating thing when I try. My computer doesn't detect the SD card or storage, either. (The SD card is fine, though. I put it in another phone and everything is still there.)
I have no idea what happened with it. I don't know if this is some random hardware damage, or if I should find an RUU and try to fix it or what.
I've had the worst luck with phones these past few weeks.
Any suggestions?

What version of CM Recovery do you have?
I would go back to stock and redo everything again. Download this file
http://www.fourty.net/~berzerker/stockstuff/PB31IMG_3.26.605.1_RUU.zip
Rename it PB31IMG.zip and put it on the root of your SD card, boot into the bootloader and let the update run its course. This will bring you back to a completely stock 2.2. From there you can re-root and do as you please.

I was on CW 2.5.1.2. But everytime I try to get into the recovery, the phone just vibrates five times and the LED flashes green. I'm also not sure that hboot is seeing my SD card. I'm going to try it, though.

Here is the RUU if you need it
http://shipped-roms.com/index.php?category=android&model=Incredible
The bottom one on that page is the Stock 2.2 build.

g00s3y said:
Here is the RUU if you need it
http://shipped-roms.com/index.php?category=android&model=Incredible
The bottom one on that page is the Stock 2.2 build.
Click to expand...
Click to collapse
I appreciate it, but hboot isn't recognizing the SD card.
I'm really thinking there's some hardware damage.

godsmacked4653 said:
I appreciate it, but hboot isn't recognizing the SD card.
I'm really thinking there's some hardware damage.
Click to expand...
Click to collapse
I'm not sure if it works, but can you boot into hboot and run the RUU from there and update. I don't think you need to have a working SD Card in order to do that, but I could be wrong. At least then it will be stock and no worries if you take it to verizon.

g00s3y said:
I'm not sure if it works, but can you boot into hboot and run the RUU from there and update. I don't think you need to have a working SD Card in order to do that, but I could be wrong. At least then it will be stock and no worries if you take it to verizon.
Click to expand...
Click to collapse
Do you mean running the Windows RUU? I tried that last night, but it could never find the device. ADB recognizes it, though, so idk what the problem was.

godsmacked4653 said:
Do you mean running the Windows RUU? I tried that last night, but it could never find the device. ADB recognizes it, though, so idk what the problem was.
Click to expand...
Click to collapse
If you have the unrevoked USB drivers installed I believe that is what causes it. You have to have the "stock" drivers for the phone installed on the PC for it to work, that was a problem I was having when trying to run the RUU.

g00s3y said:
If you have the unrevoked USB drivers installed I believe that is what causes it. You have to have the "stock" drivers for the phone installed on the PC for it to work, that was a problem I was having when trying to run the RUU.
Click to expand...
Click to collapse
I do have the stock drivers. I used unrevoked on Linux, and I've tried the RUU in Windows. But still no go.
I'm probably just going to take it up to Verizon today. If it can't boot, they really can't see that I've changed anything, right?

very true, good luck

g00s3y said:
very true, good luck
Click to expand...
Click to collapse
yes, good luck let us know ho it goes....

Kent_Davis said:
yes, good luck let us know ho it goes....
Click to expand...
Click to collapse
The sales rep looked at it for two minutes, and they're overnighting another Incredible to me.
So on one hand, I'm pretty happy about how easy it was.
On the other hand, I'd rather keep the AMOLED screen.
Does anybody know if I'm going to get a refurb, or will I get a new SLCD model?

If you had AMOLED first and they give you an SLCD, you can ***** at them and they have to give you an AMOLED one. Cuz that's what you payed for.
Sent from my ADR6300 using XDA App

dpwhitty11 said:
If you had AMOLED first and they give you an SLCD, you can ***** at them and they have to give you an AMOLED one. Cuz that's what you payed for.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
^ that. I just had to have a new one sent to me, its coming today. When I called tech support I asked them about what one I would be getting. They said that because I bought an AMOLED, I would be getting an AMOLED replacement.

g00s3y said:
^ that. I just had to have a new one sent to me, its coming today. When I called tech support I asked them about what one I would be getting. They said that because I bought an AMOLED, I would be getting an AMOLED replacement.
Click to expand...
Click to collapse
Yep. I got my replacement today. It's an AMOLED. As far as I can tell, all the hardware is working like it should.
This is probably the easiest time I have EVER had with Verizon.
But for future reference, five vibrations + blinking green LED = replacement.

I had same problem yesterday, five vibr.+ green blinks, but I had access into bootloader. I decided to reflash stock rom. Finally fixed problem
Sent from my ADR6300 using XDA Premium App

BIG Problem...NEED HELP

I have been using incredibly re-engineered z and downgraded to clockwork 3.0.0.7 as the instructions say to do to load nils business sense z . I downloaded the rom and used Rom Manager to install the new rom, as I always do, except for restoring sometimes in recovery. For some reason when the phone booted back there was a horizontal black line across the screen below the "HTC Incredible boot screen...then there are two vertical white lines at each end of the screen and the center is black.. The home,menu,back and search button still have haptic feedback, so i assumed the phone didnt quite make it into recovery...pulled the battery...tried regular reboot...same thing happens at the boot screen. Got phone into bootloader and when i hit fastboot, it shoots out a bunch of errors it seems real quickly. All is can read is SD checking...no image or wrong image...PB310IAG.zip (i think)...lack of heap. I tried to get the phone into recovery from the bootloader screen and the same thing keeps happening. I'm stuck and have no clue what kind of fix there is for this...am i bricked? I dont get this...have flashed roms 20 times or so and nothing like this has ever happened...please help!

Sense you can't get into recovery you are going to have to flash back to stock with an RUU..... if you want I will help you through the process..... first check and make sure your SD card is formatted fat32... and let me know and we will go from there
Sent from my ADR6300 using XDA App

i was able to format fat 32...also tried a factory reset and clear memory...appreciate any help...thanks!

actually just tried to make sure once again and it says SD FAT32 init OK
(red letter) 255: Not key-card!!!
Process done, reboot device?
(vol up) yes...i am at that screen now

jdaniels31 said:
i was able to format fat 32...also tried a factory reset and clear memory...appreciate any help...thanks!
Click to expand...
Click to collapse
Ok follow these steps exactly for step was formatting the SD so hboot can read the zip..... now download the zip I'm giving you and place it on the root of your SD card once you have it there rename the zip PB31IMG.zip exactly, then boot into hboot wait for for it to search for it if you did my steps correctly it will once it finds it it will ask you if you want to update press the button up to update let it do its thing till it says it done and asks you to reboot... don't panic and pull the battery because the process can take awhile just be patient... make sure you have a good charge
Here's the file let me know what happens....
http://db.tt/8YWjgVF
Sent from my ADR6300 using XDA App

hit volume up and rebooted...didnt reboot into hboot though and same thing happened at incredible screen...assume the sd card is still formatted correctly

i do not have a sd adaptor for my mac and not sure how to flash anything on the hboot screen. Also I have never used my computer for anything on the phone so know very little about how I would put something on the root of my sd card through a computer

thinking about going to verizon tomorrow and just telling them that I might have picked up some new malware that I hear is going around on the market...that it has caused this to my phone...???

jdaniels31 said:
thinking about going to verizon tomorrow and just telling them that I might have picked up some new malware that I hear is going around on the market...that it has caused this to my phone...???
Click to expand...
Click to collapse
Well I thought I could help but if you can't access your SD card then that wont work.... the root of the SD is the section where all the folders are located....
Sent from my ADR6300 using XDA App

just wierd...flashed many a rom and this has never happened before. No clue what I did wrong as I do the same thing every time I flash a new rom through rom manager...make a backup if I wish and wipe...then reboot and off we go...for some reason things went a bit different this time. no clue...?

Yea it sounds strange if you go to Verizon be carefull
Sent from my ADR6300 using XDA App

if i am able to get an adaptor, how easy would it be to do this. As mentioned, I ve never really done anything with the phone on my computer. I have seen the mass storage files and pulled pics from the sd card through a usb cord and thats about it. I can get an adaptor pretty easily. Just dont know if I can actually do this. I'm decent with computers, but far from an expert

what did i do to the phone so i can try not to do this again. Its like rom rom manager messed me up...sux

Its hard to tell what happened without skittles more info but I can help you I will we will Yakut step by step if you want to try I'm willing to help
Sent from my ADR6300 using XDA App

most definitely...pretty beat from a long week. Are you gonna be around tomorrow? Also, do you know about mac's? I also have a windows machine so i guess it doesnt matter, but know the mac a little better myself.

I use windows myself but all you need it for is to download the file and then copy it to your SD the rest is done on the phone its actually pretty easy ill just have to explain it in more detail for you.... so if you want to wait go ahead and download the file its about 180mb so you will have it and we will get you fixed
Sent from my ADR6300 using XDA App

dl'ing file now...let me know when you might be up and about so we can get this done. Really appreciate it!

I'm usually up by 9 I have a 5 month old no sleeping in here
Sent from my ADR6300 using XDA App

haha...a 4 year old here...she's still up though so I might make 9...gonna have to run to the store to get that adaptor and have other chores as well, but first things first...thanks again

No problem I know what its like
Sent from my ADR6300 using XDA App

Flashing ROM

I have downloaded the ROM Classic v0.1.0 Supermagic, placed it on my SD card. I have also unlocked my bootloader and have CWM recovery. I have returned to the bootloader screen, went to recovery mode, and went to select which zip I wanted to flash. I found the classic v0.1.0 file and slected it, which I thought would begin the flash/download. It simply opened and gave me 3 more options for files. data/, system/, and META-INF/
I should probably mention that after getting the classic v0.1.0, i extracted it and put that file on my sd card.
I have an EVO 4G, unlocked but still with the S-ON, although I can still flash files. I really appreciate any help.

Don't extract a rom..and use smelkus recovery its better than that one
Sent from my PC36100 using xda premium

but other than that mistake, it looks like I'm on track? and speed really isn't an issue right now. As new as I am, I simply want it to work.

WeAreGuns said:
but other than that mistake, it looks like I'm on track? and speed really isn't an issue right now. As new as I am, I simply want it to work.
Click to expand...
Click to collapse
+1 on what Ireyes said and also wipe all except sd card 3 times, then flash.

Read the Evo guide in my signature

MIKESTONY said:
+1 on what Ireyes said and also wipe all except sd card 3 times, then flash.
Click to expand...
Click to collapse
this will help I hope. i'm stuck in a boot loop atm. I eventually cose a different ROM, papasmurfs CM9, but i kept the same procedures, all went well until this boot loop. hope this wipe helps.

HipKat said:
Read the Evo guide in my signature
Click to expand...
Click to collapse
Wow. That helps. I followed the rules and read everything I could before attempting anything and searched and read some more. Somehow I missed that thread. Would have saved me a boatload of time and frustration.

WeAreGuns said:
Wow. That helps. I followed the rules and read everything I could before attempting anything and searched and read some more. Somehow I missed that thread. Would have saved me a boatload of time and frustration.
Click to expand...
Click to collapse
Try fully Rooting your evo I had the same problems when I unlocked the boot loader on the og evo for the second time.don't worry you can RUU it and get back to fully stock if you have any problems.
this right here is my pretty boy swag!