Develop Bugs

[Q] Need help loading new RADIO on DZ

Hey all, hope you can help me out. I've done lots of reading and I can't figure it out.
I'm running CM7 currently and want to upgrade the RADIO from 26.03.02.18 to 26.06.02.27.
I'm rooted, S-OFF and CIDNUM=11111111, and I've loaded the Eng H-boot 0.84.2000
Boot loader screen output:
VISION PVT ENG S-OFF
HBOOT-0.84.2000 (PC1012000)
MICROP-0425
RADIO-26.03.02.18_M3
eMMC-boot
I got the 26.06.02.27 RADIO image from cyanogenmod wiki page.
The android-info.txt within the PC10IMG.zip contains the following:
modelid: PC10*****
cidnum: 11111111
mainver: 1.19.531.1
hbootpreupdate:13
When I place the PC10IMG.zip file on the /sdcard and fastboot it just boots with lines "no image or wrong image". It never detects the PC10IMG.zip file in order to upgrade the radio.
Anyone have any suggestions? I'm all out of ideas.
Thanks.

Use this link.
http://forum.xda-developers.com/showthread.php?t=970809
rename the downloaded file to PC10IMG.zip and place in the root of your SD card.

Actually I just got it done using the flashboot from android sdk. I just extracted the radio.img from the ZIP file and did the following...
1. get fastboot/Android SDK on your PC
2. reboot your phone to bootloader -> fastboot
3."fastboot flash radio R:\radio.img"
worked like a charm..
thanks for your response.

[Q] Can't flash splash please help...

I tried to flash a new splash using android flasher 1.6.1 and it didn't worked out.
I tried to do it using ADB and it's write to me :
sending 'splash1' (750KB)...
OKAY [0.118s]
writing 'splash1'...
FAILED (remote:not allowed)
finished.total time 0.119s
I am using Cyanogen7 ROM and I have S-OFF :
BRAVO PV4 SHIP S-OFF
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.09.05.30_2
Can please someone help me ?

fastboot flash?

ghalalb said:
fastboot flash?
Click to expand...
Click to collapse
yes
Im trying to change the splash picture.

sorry, I should have explained myself, have you flashed from fastboot or adb only? I'm sure you have to do it from fastboot not adb, there is a tut on here somewhere, but i can't find the link for it
could try this method though i've not
http://forum.xda-developers.com/showthread.php?t=794638
AmonRa 2.0.1 | PVT4 40000 S-Off Alpharev 1.8| HBoot 0.93.1000 | Radio 5.17.05.08 | LeeDroid 3.0.2 (A2SD) | HTC Desire A8181 | UOT Kitchen Mods

found the method I used
http://forum.xda-developers.com/showthread.php?t=795132&highlight=fastboot+flash+splash1
AmonRa 2.0.1 | PVT4 40000 S-Off Alpharev 1.8| HBoot 0.93.1000 | Radio 5.17.05.08 | LeeDroid 3.0.2 (A2SD) | HTC Desire A8181 | UOT Kitchen Mods

That method worked for me too, nice

I tried to do it with fastboot ,still don't work for me.
it says it's all done but nothing happends.
I also tried to do the S-OFF again and it give me the next error:
waiting for your device... FOUND!
Identifying your phone:
Device model: PB992
CID: 11111111
MID: PB992
HBOOT version: 0.93.0001
Screen type:
Your phone was not recognized or is unsupported at this time.
If you are 100% sure your phone type should be supported in this version,please note the Model ID displayed.
Powering off in 60 seconds.
I dont understand what's wrong ?

I use android flasher. Its damn easy for noobs. I'm not a noob, but I'm lazy enough to use it.

I have also tried with Android Flasher but still doesn't work...

kleinyair said:
I tried to do it with fastboot ,still don't work for me.
it says it's all done but nothing happends.
I also tried to do the S-OFF again and it give me the next error:
waiting for your device... FOUND!
Identifying your phone:
Device model: PB992
CID: 11111111
MID: PB992
HBOOT version: 0.93.0001
Screen type:
Your phone was not recognized or is unsupported at this time.
If you are 100% sure your phone type should be supported in this version,please note the Model ID displayed.
Powering off in 60 seconds.
I dont understand what's wrong ?
Click to expand...
Click to collapse
I think, you should write this problem on irc.freenode.net, channel #alpharev
Don't know what's the problem, but think the guys from alpharev-team could help here...
Sent from my HTC Desire using XDA App

anderl78 said:
I think, you should write this problem on irc.freenode.net, channel #alpharev
Don't know what's the problem, but think the guys from alpharev-team could help here...
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
How do I use the IRC ?
I tried to write it in my exlorer,didn't go nowhere.
I'm sorry I'm quite new here.

And your fastboot/hboot does say something like aplpharev on the top? If that is the case it will also work if you do it right when booted into fastboot. I might be able to guide you through it.
If that is not the case, something is wrong, and you will need to run alpharev again.
I also dont get how your cid can be 11111111, as that definitely does not look right. Try booting to fastboot and run "fastboot oem boot" and write the cid it throws out it should be something like HTC_Y13

mortenmhp said:
And your fastboot/hboot does say something like aplpharev on the top? If that is the case it will also work if you do it right when booted into fastboot. I might be able to guide you through it.
If that is not the case, something is wrong, and you will need to run alpharev again.
I also dont get how your cid can be 11111111, as that definitely does not look right. Try booting to fastboot and run "fastboot oem boot" and write the cid it throws out it should be something like HTC_Y13
Click to expand...
Click to collapse
My hboot doesn't say nothing about alpharev i got it allready s-off from the store,thats what it write on my hboot:
BRAVO PV4 SHIP S-OFF
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.14
I run fastboot oem boot and this is the reasult:
I will very appreciate if you could please help me.

Try the alpha rev s-off method (bootcd) then try again with the gui tool

isit-LoVe said:
Try the alpha rev s-off method (bootcd) then try again with the gui tool
Click to expand...
Click to collapse
I have allready tried with alpharev bootcd and it gave me:
waiting for your device... FOUND!
Identifying your phone:
Device model: PB992
CID: 11111111
MID: PB992
HBOOT version: 0.93.0001
Screen type:
Your phone was not recognized or is unsupported at this time.
If you are 100% sure your phone type should be supported in this version,please note the Model ID displayed.
Powering off in 60 seconds.
what do you mean gui tool ?

seems like your phone uses an alternative s-off method or its just faking S-OFF (only displaying it on screen)
i googled for about 15 mins and found this: http://4pda.ru/forum/index.php?showtopic=180832&st=12640#entry6668455
use google language translator for other language
When you try to get the S-OFF:
identifying your phone:
Device model: PB992
CID: 11111111
MID: PB992
HBOOT VERSION: 0.93.0001
SCREEN TYPE:
Your phone was not recognized or is unsuported at this time.
Have:
BRAVO PVT4 SHIP S-OFF
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.14.05.17
Aug 10, 2010 17:52:18
Telephone gray, root mean.
Beat 3 months, finally found the solution:
when alpharev gives Your phone was not recognized or is unsuported at this time.
disable the phone from the wire
Hit Ctrl + C
see $
write vi alpharev.sh Hit Enter
cursor down to 117 lines, where it is written PB9920000 remove zeros that would get PB992
Hit Shift colon and write wq
see $
write. / alpharev.sh
process will start again on the instructions of obtaining s-off
ps. sewed with flash
Click to expand...
Click to collapse
gui tool i mean android flasher but after you successfully flashed with alpha rev :/

I tried the process,I changed the PB9920000 to PB992 but I dont understand what is that mean :"Hit Shift colon and write wq"
what is shift colon ?
Edit :O.K I figured it out !!!!
after I changed the num to PB992 I pushed Shift+Z
and I wrote :" ./ alpharev.sh "and Enter
It start all over from the begining and its all working good now.
Thank you very much...

His phone is s-off alright, but it has somehow been delivered that way, so you have got a phone, which were meant for development or a store demo device(have seen the same issue on store demo devices).
The problem is, that this is real s-off, which means it's set by a flag on a low level of the nand, so he still has the original bootloader, which doesn't support fastboot commands. And because it's a development device it's got cid 11111111, which is wrong and makes alpharev recognize it as a different/non existing device. You should be able to flash it in another way because as you are s-off, you can make the recovery ask the bootloader to flash low level stuff like splash, and the bootloader is s-off, so it shouldn't check for anything. You might need some specialist aka the ones from alpharev though if they are interested in helping you.
edit: As it is s-off it might very well be able to flash one of the pb99img.zip files containing the alpharev hboot found on the alpharev site because it will accept them as if they were from HTC, so just put them on the sd-card with the right name and reboot to the bootloader. This way you might be able to activate fastboot commands, and start flashing the same way we do. This requires that those images will work normally on your phone, so i would still ask the alpharev guys so you don't risk a brick.

i agree with mortenmhp asking alpharev is probably the best idea
shift colon is probably :
in the editor vi you use ":wq" to tell the programm to save stuff and exit the editor

How can I make contact with alpharev ?
I didn't understant how to use the IRC...

How i know S-off and Eng-off

How i know is my htc desire hd is:
S-off
Eng off
thanks

"Checking the device state" instructions here:
http://forum.xda-developers.com/showpost.php?p=9525635&postcount=2

for first on .. it's OK
What about If it says ACE PVT ENG S-OFF, you have ENG S-OFF, go to System info
where i found it ?
thanks

In bootloader mode...
Sent from my HTC Desire HD using XDA App

Checking the device state:
- Go to the bootloader (turn fastboot off, turn off phone, hold vol- and power)
- If it says ACE PVT SHIP S-OFF in the first line, your device is Radio S-OFF
- If it says ACE PVT ENG S-OFF, you have ENG S-OFF, go to System info
- If system info CID is 11111111, your device is SuperCID
- And if you can verify either Radio S-OFF or SuperCID (and you did both), it worked fine and you have both of them
- You can check your original CID by going to radio tool folder with cmd and typing: "adb shell getprop ro.cid"
From: h**p://forum.xda-developers.com/showpost.php?p=9525635&postcount=2

[Q] Rooted or not

Hi all, I followed the step in strawmetals guide to root, s-off, and debrand htc DZ. I am not sure if it worked. Android down grade appeared to work but how do I
1. Tell if I am perm rooted?
2. Confirm S-OFF?
3. Confirm Debranding?
In device settings I have,
Android Ver 2.2
Build Ver. 1.34.405.5

If your phone is on and you see superuser app its rooted. As far as checking soff and debrand boot into bootloader. There are commands to run with adb that tell u all that as well. They are usually included in guides
Sent from my HTC Vision using xda premium

Boot loader method: boot your phone to boot loader (power off, hold power on and down volume)
Edit: remember to remove any PC10IMG.zip from your SD card.
you will see
PVT ENG S-OFF
H BOOT 0.76.200
Then choose from menu chose Bootloader => System Info
you will see, at near bottom CID 11111111
Then you're ENG S-OFF, perm root, SIM unlocked
gfree method
extract this in to your adb folder http://www.thinkthinkdo.com/trac/project1/raw-attachment/wiki/gfree/gfree_verify_v01.zip
run:
$adb push gfree_verify /data/local
$adb shell
#su
#cd data/local
#chmod 777 gfree_verify
# stop ril-daemon
# ./gfree_verify
You will get
gfree verify_cid returned:
@CID: 11111111
gfree verify_secu_flag returned:
@secu_flag: 0
gfree verify_simlock returned:
@SIMLOCK= 00
I did not try the gfree verify myself so I cannot recommend it, try at your own risk. I recommend the bootloader method because it's easier and you don't have to run any code.
Please click thanks if this helps.
Edit: at this point, you should start to happy flashing I would recommend Adromadus Audacity Beta 2

KyraOfFire said:
Boot loader method: boot your phone to boot loader (power off, hold power on and down volume)
Edit: remember to remove any PC10IMG.zip from your SD card.
you will see
PVT ENG S-OFF
H BOOT 0.76.200
Then choose from menu chose Bootloader => System Info
you will see, at near bottom CID 11111111
Then you're ENG S-OFF, perm root, SIM unlocked
Click to expand...
Click to collapse
Sorry, but this isn't right. That just shows you have S-OFF and SuperCID. It doesn't say anything about whether you have root access or not (which the Superuser app can tell you, or running an app that needs root, or trying to "su" in Terminal Emulator). For instance, you can be S-OFF but running a non-rooted stock ROM.
SuperCID is completely separate from SIM unlock.
gfree_verify can show you the SIM unlock though, as you said.
Sent from my Desire Z running CM7.

u guys are good
Ok, here is what i got
Vision pvt eng s-off
hboot-0.84.2
emmc-boot
@simlock=00
cid = 1111111
I am rooted
Thanks

@steviewevie: thanks, I learned something new

Big Bam said:
Ok, here is what i got
Vision pvt eng s-off
hboot-0.84.2
emmc-boot
@simlock=00
cid = 1111111
I am rooted
Click to expand...
Click to collapse
You have S-OFF, SIM unlock and SuperCID. That doesn't show whether you are rooted or not, but that setup means you can flash a pre-rooted custom ROM, or alternatively you can root another ROM that is rootable and your root will be permanent (since you have S-OFF).
KyraOfFire - you are very welcome !
Sent from my Desire Z running CM7.

Can't root this Desire HD...=(

I have just bought this phone, and i've rooted anothers, but i tried every guide, every tool (all of them no longer working), and not even HTCDev could help me.
On HTCDev's 1st step tells me to upgrade the RUU, and i tried with all versions, none worked out.
Some details of my Desire:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.52.27
eMMC-boot
Sep 7 2011,19:06:24
I can't find a guide to get my S-OFF, all of them fail. I tried too with VISIONary+ r14 and keep frozen on black screen when i attemp to temproot.
Followed this guide to get temporary root. Writing on cmd "adb shell" at last step I got "$" and cant do the downgrade. I have made my Goldcard too, but nothing works...
Please, tell me what should i do, i just want RADIO S-OFF and then i will be capable of root or whatever i like =). Thanks to all anyways.

S-Off takes a great deal of skill now that AAHK is retired. You can still unlock the bootloader though.

klaien said:
I have just bought this phone, and i've rooted anothers, but i tried every guide, every tool (all of them no longer working), and not even HTCDev could help me.
On HTCDev's 1st step tells me to upgrade the RUU, and i tried with all versions, none worked out.
Some details of my Desire:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.52.27
eMMC-boot
Sep 7 2011,19:06:24
I can't find a guide to get my S-OFF, all of them fail. I tried too with VISIONary+ r14 and keep frozen on black screen when i attemp to temproot.
Followed this guide to get temporary root. Writing on cmd "adb shell" at last step I got "$" and cant do the downgrade. I have made my Goldcard too, but nothing works...
Please, tell me what should i do, i just want RADIO S-OFF and then i will be capable of root or whatever i like =). Thanks to all anyways.
Click to expand...
Click to collapse
have you tried this as well?
http://forum.xda-developers.com/showthread.php?t=2168500

Mortal Eternity said:
have you tried this as well?
http://forum.xda-developers.com/showthread.php?t=2168500
Click to expand...
Click to collapse
Yes i tried it too, just the same. Bootloader dont give me the Unlock Token.
My Build v. is 3.13.161.5
Sense 3.0
Android 2.3.5
***********************************************
EASY UNLOCK BOOTLOADER TOOL
glevitan 2013
************************************************
This tool will help you to unlock / relock your bootloader
To succeed make sure:
1. HTC drivers are correctly installed
2. USB debugging is enabled
adb, fastboot, md5sum, wget other utilities will be installed
Checking adb connectivity....
-------------------------------------------
1. Unlock Bootloader
2. Relock Bootloader
3. Quit
-------------------------------------------
[What do you want to do]1
Detecting phone model
If your Device is an HTC Desire HD / Inspire 4G select yes to continue, if NOT j
ust quit. FLASHING THE WRONG PARTITION WILL BRICK YOUR DEVICE!!!
1. Yes
2. No
[Continue?]1
Getting Build version
your build version is 3.13.161.5
"""Your will reboot in fastboot again to continue the process
* server not running *
Obtaining Unlock Token
< waiting for device >
... INFO[ERR] Command error !!!
OKAY [ -0.000s]
finished. total time: -0.000s"""

klaien said:
Yes i tried it too, just the same. Bootloader dont give me the Unlock Token.
My Build v. is 3.13.161.5
Sense 3.0
Android 2.3.5
***********************************************
EASY UNLOCK BOOTLOADER TOOL
glevitan 2013
************************************************
This tool will help you to unlock / relock your bootloader
To succeed make sure:
1. HTC drivers are correctly installed
2. USB debugging is enabled
adb, fastboot, md5sum, wget other utilities will be installed
Checking adb connectivity....
-------------------------------------------
1. Unlock Bootloader
2. Relock Bootloader
3. Quit
-------------------------------------------
[What do you want to do]1
Detecting phone model
If your Device is an HTC Desire HD / Inspire 4G select yes to continue, if NOT j
ust quit. FLASHING THE WRONG PARTITION WILL BRICK YOUR DEVICE!!!
1. Yes
2. No
[Continue?]1
Getting Build version
your build version is 3.13.161.5
"""Your will reboot in fastboot again to continue the process
* server not running *
Obtaining Unlock Token
< waiting for device >
... INFO[ERR] Command error !!!
OKAY [ -0.000s]
finished. total time: -0.000s"""
Click to expand...
Click to collapse
What hboot version are you running? Check in fastboot usb

glevitan said:
What hboot version are you running? Check in fastboot usb
Click to expand...
Click to collapse
HBoot 2.00.0027

klaien said:
HBoot 2.00.0027
Click to expand...
Click to collapse
You need to update your hboot first to 2.00.0029
Sent from my Desire HD

yumm91 said:
You need to update your hboot first to 2.00.0029
Sent from my Desire HD
Click to expand...
Click to collapse
Done, I have unlocked bootloader succesfully =), thanks.
Now I need to downgrade from my 3.13.161.5 right? Any ideas?

klaien said:
Done, I have unlocked bootloader succesfully =), thanks.
Now I need to downgrade from my 3.0 right? Any ideas?
Click to expand...
Click to collapse
The answer is already above you from Mortal Eternity.
http://forum.xda-developers.com/showthread.php?t=2168500
As you can see in that post, you have already done no 1. Just proceed according to the steps mentioned to gain root.
Sent from my Desire HD

Root, Radio S-OFF, SuperCID, SIMUnlock for DHD
At last i got root, S-OFF SIM-Unlock and SuperCID
Just for DHD devices with Android 2.3.5, Sense 3.0, and Build version 3.x!!
Step by step:
0.- (ON YOUR PHONE) "Settings option -> Applications -> Development -> Check the box for USB Debugging to turn it on
1.- Upgrade HBOOT to 2.00.0029
- Download the HBOOTupdate 2.00.0029 (rom.zip) and put it on your C:/ drive.​- Download the HBOOTUpdate kit, extract it, and run "hboot update by behtash.bat". Wait until hboot flash complete.​
2.- Unlock your BootLoader
- Simple as following HTCDEV steps​
3.- Flash CWM Recovery
- Download the Recovery Kit, extract it.​- Download the SU flashable.​- Put the SU flashable on your SDCard​- "Only Charge" mode again and run "flash recovery.bat". Wait for it flash the recovery.​- Reboot your phone to Bootloader Screen, go to the recovery and flash now the SU.​--------------------------------------------------------------------------------------------------------------------------------------------------------
Once here you gained root access, the next steps are to get S-OFF, SuperCID, and SIMUnlock.
--------------------------------------------------------------------------------------------------------------------------------------------------------
4.- Flash a new Boot.img
- Download the UpdateBoot Kit, extract it​- Run the "flash boot.bat".​
5.- Get S-OFF, SuperCID, and SIM Unlock
- Follow the high-level DHD/Inspire manual S-OFF hack concept for advanced users.​
All this stuff is a compilation of multiples guides, thanks to all for the support. Good luck with your DHD.

Or you could just head to this thread : http://forum.xda-developers.com/showthread.php?t=2184953 and do all of the above.

hacktrix2006 said:
Or you could just head to this thread : http://forum.xda-developers.com/showthread.php?t=2184953 and do all of the above.
Click to expand...
Click to collapse
Sure =), but that tuto was to compile all the guides in one. Thx for the link anyway.

I tired the steps above, but it still keeps going back to 2.00.0027, it refuses to update to 2.00.0029 help?

cre8ive65 said:
I tired the steps above, but it still keeps going back to 2.00.0027, it refuses to update to 2.00.0029 help?
Click to expand...
Click to collapse
Post some details about your phone please.
example:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.52.27
eMMC-boot
Sep 7 2011,19:06:24

successfull flashed...and now on ease....
klaien said:
Post some details about your phone please.
example:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.52.27
eMMC-boot
Sep 7 2011,19:06:24
Click to expand...
Click to collapse

If you're nearby, call out. I can lend a hand.

ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
My issue is that i can't get the identifier token, because I can't update to 2.00.009, because I can't make a gold card.

cre8ive65 said:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
My issue is that i can't get the identifier token, because I can't update to 2.00.009, because I can't make a gold card.
Click to expand...
Click to collapse
Why not?

glevitan said:
Why not?
Click to expand...
Click to collapse
I'm about to pull my hair out, this is so effing stupid. I keep getting stuck at step 1! I have a goldcard and it still wont update to 2.00.0029! I run the update tool, then when I go to fastboot it still says "2.00.0027" at the top. What am I doing wrong?

Read carefully : the unlockable bootloader update would seam to be region specific to make and model of phone, there are about 4 or 5 different versions on the htcdev website, please check the correct model and region of phone first...
Here's an idea try the PD98IMG.ZIP in this post, http://forum.xda-developers.com/showthread.php?p=40498764 it is the hboot 2.0.29 update you use via direct bootloader flashing.
Read the whole thread, it should help.... http://forum.xda-developers.com/showthread.php?t=2239497
You could also read this thread too.
http://forum.xda-developers.com/showthread.php?t=2221039
They are all good.
Sent from my HTC Desire HD using xda app-developers app