Develop Bugs

HELP! I think brick my phone!!

Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all

dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.

henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!

i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?

just Change your ROM..,

hard reset is somthing i dont want to do. Is there any other option?

kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.

same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error

Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.

henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution

Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705

cool, will try that one. thnx

On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me

dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.

Help... *Sigh*

I've been hacking dash' for a long time now... my friend gave me his phone to hack...
Thought it was easy...
I mustv'e messed something up... now every time i boot my device up it gets stuck on the screen with three colors... red, green and blue one
i have try hard resseting it - two soft keys power button...
i have tried leaving the battery out... no good
any help would be greatly appreciated

the tri color screen is the bootloader. you need to use that to flash back to a stock rom, then try to flash again.

because I am stuck on this screen my phone will not connect to the computer and sync... what should I do?

Nano3 said:
because I am stuck on this screen my phone will not connect to the computer and sync... what should I do?
Click to expand...
Click to collapse
Turn the damn thing off.
Press and hold in the camera button.
After 10 secs or so, plug in your USB cable.
You can now install an Official, (from your provider), ROM available at a Sticky near you.
Once an official ROM is back on, you can continue with your evil plans.
You have to use an OFFICIAL ROM first.

thanks for that help... i did as i was told, advance to a white screen where it said "checking sd contents" still not being able to connect to my computer via activesync so i can run the original factory rom

Remove your SD card prior to flashing. It's really a very simple process man, so if it's not working for you, you're making a rather minor mistake. Just follow the information in the stickies. You may even find a video on Youtube of someone flashing from the bootloader. Oh, and if you'd read the stickies, you'd know that you don't need to connect via activesync when in bootloader mode. The PC should automatically connect and install whatever driver it needs to communicate with your phone so you can flash.

[Q] HTC Trophy bricked after upgrade to NoDo

Hello to everyone, this is my first postnin this great forum.
Yesterday i started to upgrade my htc trophy but at the step 8 out of 10 the upgrade stopped.After one hour it was still at the same point, so (I know i probably did something stupid) i disconnected the phone.
From this moment i cannot use the phone cause even trying the camera button+volume+power it says to connect the phone to zune, but when i do it and zune starts to do a restore i ve an error 100102e "no restore points".
I really don't know what to do....somebody could help me?
Thanks in advance

Anzla1986 said:
Hello to everyone, this is my first postnin this great forum.
Yesterday i started to upgrade my htc trophy but at the step 8 out of 10 the upgrade stopped.After one hour it was still at the same point, so (I know i probably did something stupid) i disconnected the phone.
From this moment i cannot use the phone cause even trying the camera button+volume+power it says to connect the phone to zune, but when i do it and zune starts to do a restore i ve an error 100102e "no restore points".
I really don't know what to do....somebody could help me?
Thanks in advance
Click to expand...
Click to collapse
Might want to go to the Dev section and see if they have a factory ROM available, and after that try to flash it from the bootloader... Probably your best bet...

I had a pretty similar experience. I did a forced nodo update (hungarian PPTP). Since I read that HTC bundled their nodo update with a newer radio (or whatsoever) I wanted to perform a rollback to pre nodo and then wait for the official HTC HD7 nodo. However, the rollback failed and left me in pretty much the same state that you're in. My device just didn't boot anymore. It always returned to the update screen. What I did was exactly what the user above me said. I downloaded a suitable stock ROM (european HD7 ROM for me) and flashed that. Afterwards I started Zune, removed the "old" device and then connected my freshly flashed HD7. Guess what, it was recognized and I immediatley got the updates. It's working flawlessly since then.

Thank you both, I ll try to find a ROM for the Htc trophy and flash it ( i ll try to find out how do it)

There's not much to find out. Hold the volume down button and press power until you see the tri colored screen saying "serial". Connect it to your PC and it should say "usb" after while. Then just start the exe file and follow the steps as told on the screen.
Sent from my HD7 T9292 using XDA Windows Phone 7 App

Anzla1986 said:
Thank you both, I ll try to find a ROM for the Htc trophy and flash it ( i ll try to find out how do it)
Click to expand...
Click to collapse
Proper way to initiate hard reset is to power off your phone. Hold volume up and down at same time, and just slightly press power button. That's all.
Than you need to press volume down to restore settings, and to press volume down once more to reset your phone.
If that doesn't help, you should find a proper ROM for your phone and flash it.
To find proper ROM for your phone, you should look here

you could try this... its easier...
http://support.microsoft.com/kb/2530409
its not for this use, but it should work... try it... several people recovered using this tool from bricked devices...

HELP!

After an update unsuccessful, my phone displays a list of problems:
1 - After upgrading unsuccessful. I tried to go back to Original ROM (STOCK), then came the first problem, the screen hangs after a few minutes, generating duplicate images or shuts off completely, but with some precionadas the power button, alloy display.
2 - When I turn on the computer, device is not accepted,adb not recognizing.
2.1 - I tried other machines, already reinstalled the drivers from htc, but the computer only recognizes the device as MY HTC or fastboot.
3 - The Cellular carries not more than 10%, it is restarting the 5 in 5 minutes.
4 - some times he connects with the lcd working, and I see that it goes up to the htc logo and hangs.
Well, these are the problems. If someone managed to revive your device, please help me.:crying::crying::crying::crying:

heber_cc said:
After an update unsuccessful, my phone displays a list of problems:
1 - After upgrading unsuccessful. I tried to go back to Original ROM (STOCK), then came the first problem, the screen hangs after a few minutes, generating duplicate images or shuts off completely, but with some precionadas the power button, alloy display.
2 - When I turn on the computer, device is not accepted,adb not recognizing.
2.1 - I tried other machines, already reinstalled the drivers from htc, but the computer only recognizes the device as MY HTC or fastboot.
3 - The Cellular carries not more than 10%, it is restarting the 5 in 5 minutes.
4 - some times he connects with the lcd working, and I see that it goes up to the htc logo and hangs.
Well, these are the problems. If someone managed to revive your device, please help me.:crying::crying::crying::crying:
Click to expand...
Click to collapse
could someone help?

What is your Hboot version, and what is your base version ? Don't panic, HTC One X is currently unbrickable.

Vcek said:
What is your Hboot version, and what is your base version ? Don't panic, HTC One X is currently unbrickable.
Click to expand...
Click to collapse
Official ICS rom 2.17.707.3 Asia WWE
after giving the above mentioned error, I tried to reinstall the official rom and could not longer access my mobile device: kernel, recovery, hboot and boot belong to this rom.

not the same but STILL PROBLEM
stock rom , relocked bootloader , voodo ota rootkeeper , BUT WONT UPDATE ( it starts good and at 1/3 stops with red triangle)
PPPPLLLLEEEAAASSSEEE!!!!!!!!!!!!!!:crying:

help!
heber_cc said:
Official ICS rom 2.17.707.3 Asia WWE
after giving the above mentioned error, I tried to reinstall the official rom and could not longer access my mobile device: kernel, recovery, hboot and boot belong to this rom.
Click to expand...
Click to collapse
heber_cc said:
After an update unsuccessful, my phone displays a list of problems:
1 - After upgrading unsuccessful. I tried to go back to Original ROM (STOCK), then came the first problem, the screen hangs after a few minutes, generating duplicate images or shuts off completely, but with some precionadas the power button, alloy display.
2 - When I turn on the computer, device is not accepted,adb not recognizing.
2.1 - I tried other machines, already reinstalled the drivers from htc, but the computer only recognizes the device as MY HTC or fastboot.
3 - The Cellular carries not more than 10%, it is restarting the 5 in 5 minutes.
4 - some times he connects with the lcd working, and I see that it goes up to the htc logo and hangs.
Well, these are the problems. If someone managed to revive your device, please help me.:crying::crying::crying::crying:
Click to expand...
Click to collapse
will be having someone who knows how I can solve the problem, or part of it?

When you said "reinstall the official rom" can you tell us how did you do that.
Was it you reflash your device with a RUU ? Or a nandroid backup ?
Please also tell us what is your hboot no. written on the bootloader.

Install the official rom without any modding. Then you can update.
Sent from my EndeavorU

Vcek said:
Install the official rom without any modding. Then you can update.
Sent from my EndeavorU
Click to expand...
Click to collapse
how can I update if the battery does not want to carry more than 10%, as pointed out just above.

[Q] [HELP] P350 stuck on LG logo 4 softkeys blinking

Hi, I've just registered in this forum, though I've been reading you guys for almost a year. I just want to say that you guys are awesome, i've learned too much about android because of you.
Introduction
Said that, I recently had a problem with my P350g, I'll try to be as clear as possible hoping you can help me out.
The problem came after i installed CM 9 [stable 8] on it, at first it worked perfectly (a very few panics or reboots but i'm used to it :laugh. The next day after taking a photograph the cellphone got stuck, it had done that several times before with some other ROMs so i didn't pay much attention to it, so i took the battery off and put it again, and when I tried to turn it on, there it was, the lg logo with the 4 softkeys blinking.
-- It doesn't enter to recovery (i had recovery installed at that time) pressing [- power send] at the same time, it just stays there with the lg logo blinking.
-- It does enter to the emergency mode (yellow background with "emergency mode" in black letters) pressing [+ - power] at the same time.
-- It does enter to the fastboot mode pressing [+ power send] at the same time.
what i've already tryed:
--- i've read the wiki about this phone and try everything there (and everything found on google which is pretty much the same)
http://forum.xda-developers.com/wiki/LG_Optimus_Me
--- i've tryed using the KDZ updater as somebody on this forum recommended:
http://multidroid2.feed.nu/2012/03/27/how-to-unbrickflash-your-optimus-melg-p350-2/
using firmware from here:
http://lg-phone-firmware.com/index.php?id_mod=5
and from somewhere else on the internet, the problem here is, that when it comes to "restart the phone", it doesn't start, it just keeps getting stuck on the lg logo with the 4 softkeys blinking, after some time the KDZ updater shows an error: Upgrade Error WParam: 100 LParam: 6
--- i've tryed flashing the recovery from fastboot mode as shown on this thread:
http://forum.xda-developers.com/showthread.php?t=2131247
it flashes well, everything "succeeded" but whe it comes to reboot (flashboot reboot) the cellphone says on the screen rebooting cellphone (or something like that) but it never reboots. if I take the battery off and put it on again, and then try to turn it on, the cellphone shows at the same problem, the lg logo with 4 softkeys blinking.
--- I've also tryed this tool:
http://forum.xda-developers.com/showthread.php?t=1948326
it hasn't solved my problem either.
Computers' info
I've tried this on 2 computers:
windows 7 x86
windows 8 x64
both of them have the drivers installed, I've disabled the modem on both of them, both of them have the latest android SDK tools
both computers give me the same problems, please i need your help, i'm desperate, I've been with this problem for several days and I can't solve it. I hope you can help me out

bump!
Anybody? please, i'm desperate

Hi,
Let's hope for the good
Try to flash the rom with fastboot.
and did you overclocked it too high? maybe your nand is burned?

kD said:
Hi,
Let's hope for the good
Try to flash the rom with fastboot.
and did you overclocked it too high? maybe your nand is burned?
Click to expand...
Click to collapse
thanks for answering, yes i did overclock it really high ~804MHz can't remember the exact number, but with other roms it had been working at that level of overclock without any problems (besides the casual panics and reboots) for more than half a year.
i'm going to try flashing the rom from flashboot and see what happens

I couldn't fash a rom via fastboot
IsraelMP said:
thanks for answering, yes i did overclock it really high ~804MHz can't remember the exact number, but with other roms it had been working at that level of overclock without any problems (besides the casual panics and reboots) for more than half a year.
i'm going to try flashing the rom from flashboot and see what happens
Click to expand...
Click to collapse
Hi everybody, i tried to flash a zip containing the rom on my p350, though i could not flash it. i used the command:
fastboot flash system rom.zip
but it says the file/rom size was smaller than expected. (honestly i can't remember the actual sentence) and then it says (x < y) where x is the suposed size of the rom and y is the expected size.
i tried with several roms, and a backup a user uploaded somewhere which was suposedly legitimate.
Is there something i can do?

download lg mobile support tool (lg mobile updater)
make sure that the driver is installed on the computer
open it
let it reconize the phone then
click recover phone from CS
the phone will be returned to latest stock rom for your country
then intsall recvoery again and root again

My Method
Well you need usb debugging enabled.Remove phone's batytery and connect it to pc via usb.It will boot up (horribly of course ignore it).Then fire up the kdz updater and start the flashing process.Once the phocess starts midway anywhere in the process insert the battery.The process will complete then KDZ will sat update complete...REBOOTING....and as battery is inserted it will reboot.Voila.Hope it works for you.This is my routine method.(Bricked more than 7 times lol).

Thanks for replying
MeeDa said:
download lg mobile support tool (lg mobile updater)
make sure that the driver is installed on the computer
open it
let it reconize the phone then
click recover phone from CS
the phone will be returned to latest stock rom for your country
then intsall recvoery again and root again
Click to expand...
Click to collapse
thanks for replying, i did that, when i just plug it without pressing any button the cellphone does not get recognized by the software, when i plug it in emergency mode it does get recognized but the software gives me an error.
blazecodester said:
Well you need usb debugging enabled.Remove phone's batytery and connect it to pc via usb.It will boot up (horribly of course ignore it).Then fire up the kdz updater and start the flashing process.Once the phocess starts midway anywhere in the process insert the battery.The process will complete then KDZ will sat update complete...REBOOTING....and as battery is inserted it will reboot.Voila.Hope it works for you.This is my routine method.(Bricked more than 7 times lol).
Click to expand...
Click to collapse
thanks for the answer, I tried that way, though it keeps getting stuck in the LG logo with the 4 blinking softkeys when it comes to reboot the cellphone.