I have rooted my HTC Desire with unrevoked and alpharev and now i was going to do a nandroid backup. But when i press the backup and restore button the screen goes black and just stays that way, so i have to pull the battery and restart it. Can anyone help me with this?
What button? ROM Manager? Do it from recovery, and make sure you have enough free space on your sd card (~300MB minimum).
I found out the hard way what happens if you don't.
That's what i'm doing. I turn the phone off. Turn it on by pressing volume down and the on-button. I then go into recovery and scroll down to backup and restore, and press the on-button. Then the screen just goes black and i have to pull the battery and restart it.
Press the trackpad rather than the standby button! This should have the desired effect
Sent from my HTC Desire using XDA App
That did the trick. Thank you!
LOL. I made the same mistake.
Sent from my HTC Desire using XDA App
bbgmp said:
LOL. I made the same mistake.
Click to expand...
Click to collapse
Lol, +1!!
"...OK, vol down, power button...wait for text to appear, select recovery...all sweet, select backup/restore, press button...sheeeeet! WTF, waddid I do?? Noooo, my phones pucked! Sheeet, sheeet, sheeet!!! O, hang on, that was the off button...ooops "
I think we've all been there!!
Related
When attempting to make a selection in clockwork mod with the power button it essentially makes the screen go dark like it is locking the screen. This may be a stupid quest but is there another button for selecting options such as wipe and apply updates from sd. I know on some devices it is the trackball but I have no clue what it is on the evo.
I've seen this "feature" before. Unfortunately I don't recall how to get out of that mode. There's aparently a way to turn that on. Iirc, I got out of it by being on the top setting, vol up, then power. I was just pressing stuff at that point, so I could be wrong. On the upside, you can't really select something you don't want in that state. Lol
Sent from my PC36100 using XDA App
Hi all... since yesterday my htc sense keep closing on its own every 10 minutes.. I don't know why....
Well I have been using widget locker since yesterday...could it be the problem? Or may be any damage in the rom? Am using leedrod rom..
Pls anyone can provide any solution? Will be much appreciated...
Sent from my HTC Desire using XDA App
Please someone....
Sent from my HTC Desire using XDA App
its been 3 days now
please.. can anyone tell me whats wrong with my sense???
almost everytime i unlock my phone, it will restart all over....
this sometime happen even after long browsing..
Hello,
The first thing you can do - go to Settings, then Applications, find HTC Sense and delete it's application data. If it doesn't work try to wipe everything (all your data will be lost)
Turn the power off. If your HTC Desire is frozen, pull the battery out and reinsert it
Hold the Volume Down button
Press and release the Power button
You are now presented with a menu that allows for Fastbook, Recovery, Clear Storage, and Simlock
Select Clear Storage by pressing the Volume Down button
Press and release the Power button
Now simply confirm your decision: Volume Up for YES and Volume Down for NO
lost, so make a backup/sync your contacts).
Do you run a custom ROM?
there are now 3 different threads about Sense restarting on the same page.
Maybe you'd like to search?
sindrefyrn said:
Do you run a custom ROM?
Click to expand...
Click to collapse
yes... leedroid
but i wasnt like this firstly...
MaxBotev said:
Hello,
The first thing you can do - go to Settings, then Applications, find HTC Sense and delete it's application data. If it doesn't work try to wipe everything (all your data will be lost)
Turn the power off. If your HTC Desire is frozen, pull the battery out and reinsert it
Hold the Volume Down button
Press and release the Power button
You are now presented with a menu that allows for Fastbook, Recovery, Clear Storage, and Simlock
Select Clear Storage by pressing the Volume Down button
Press and release the Power button
Now simply confirm your decision: Volume Up for YES and Volume Down for NO
lost, so make a backup/sync your contacts).
Click to expand...
Click to collapse
tried that...
sense stays good till 1 hour then restarting again
could any widget causing this ?
thx...
GANJDROID said:
there are now 3 different threads about Sense restarting on the same page.
Maybe you'd like to search?
Click to expand...
Click to collapse
already searched...
their problem is slight different with mine..
still no solution here
Hey everybody, I'm using CM7 and occasionally when I press the power button to wake my device up from sleeping, it only lights up the 4 capacitive buttons while the screen remains black. If I fiddle with it some, it eventually turns on but it's getting more and more frequent and annoying. If you have any redirects to a thread (I couldn't find one for the life of me) or suggestions, it would be much appreciated.
I had the same issue. CM7 rc1. I went back to CM 6.1.2 for the time being.
Sent from my PC36100 using XDA App
Do you follow the thread at all? This is discussed on about half the pages. It's because you have both the CRT screen on/off animations set and you are overclocked above around 1.2ghz. Either ease up on the oc, or turn off the animations for the screen. No problem with the ROM or your phone.
Sent from my HTC Vision using XDA App
Actually I fixed the problem by turning the wifi off. SetCPU is set under 1GHz.
Sent from my PC36100 using XDA Premium App
This problem is caused by too high of an overclock.
Sent from my T-Mobile G2 running Cyanogenmod.
why not try trackball wake?
Sent from my HTC Vision using XDA App
I agree, I can't see my self not using the track pad wake method. I'm oc to just over 1ghz(ondemand) & have no problems waking up my phone with the screen on & off animations. I prefer CPU tuner over setcpu anyday.
Sent from my HTC Vision using XDA Premium App
My g2 with cm7 rc1 has similar symptoms, where when the power button is pressed the capacitive buttons light up, and the back lighting on the screen is noticeable, but nothing more. I have tried a battery pull, a soft reboot, and still the screen does not wake up. I had the oc at 1100 before this happened. Any ideas on how I can get the screen back on in order to change the settings? Thanks
update: The screen still does not come on, but I received a phone call and was able to answer it by sliding my finger across the screen in the general area where you normally swipe to answer, and then I ended the call by tapping where the end icon usually sits. So the touch screen is working, but there are no visuals.
Restore your Nandroid and set it differently next time.
Sent from my PC36100 using XDA Premium App
dvl.evo said:
Restore your Nandroid and set it differently next time.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Is there a method to restore my nandroid without being able to use the screen? Can i do it over ADB?
mr3sgte said:
Is there a method to restore my nandroid without being able to use the screen? Can i do it over ADB?
Click to expand...
Click to collapse
Do a battery pull. Put the battery back in. Hold the volume down button and then press and hold the power button. That'll put you to a screen that has a bunch of text on it. (Let go of the buttons if you're still holding them) Hit the volume down button once. Should highlight "recovery" then hit the power button to select. It'll boot into recovery now. Wipe data, then wipe cache, then wipe dalvik/cache (under advanced) then backup & restore, and select your nandroid. Once done, hit the back arrow, then select reboot
Now, if the screen doesn't even turn on when you do the batt pull, allowing you to see anything at call, sorry LOL.
dictionary said:
Do a battery pull. Put the battery back in. Hold the volume down button and then press and hold the power button. That'll put you to a screen that has a bunch of text on it. (Let go of the buttons if you're still holding them) Hit the volume down button once. Should highlight "recovery" then hit the power button to select. It'll boot into recovery now. Wipe data, then wipe cache, then wipe dalvik/cache (under advanced) then backup & restore, and select your nandroid. Once done, hit the back arrow, then select reboot
Now, if the screen doesn't even turn on when you do the batt pull, allowing you to see anything at call, sorry LOL.
Click to expand...
Click to collapse
That's good advice, but wanted to let you know it is unnecessary to do the wipe data/cache/dalvik cache before you restore a nandroid backup. Part of the restore process does a complete wipe automatically before it restores, so doing it beforehand is superfluous.
I have never heard of anyone's screen issue persisting through a reboot. That would drive me nuts. Make sure you never set SetCPU to 'Set on boot' until you are sure your governing and secondary profiles are stable with the kernal you are running on your device.
Sent from my HTC Glacier using XDA App
I know, but I like to make sure anyway. At least I know for my own sanity that it's definitely wiped lol.
Thank you all for the input, but the screen never comes on at all, even in the bootloader or recovery.
My Desire has just came contact with water yesterday.
I suppose everything is fine.
Just that my volume rocker(vol. down) is stuck.
So whenever I try to turn on my phone, it will bring me to the hboot.
I can't even use the volume rocker to get me to the recovery
Is there anyway that I can turn on my phone?
Thank you very much
Can't you move in hboot at all (vol up?)?
Have you tried vol down + power + trackball to reboot your phone? (This way you wouldn't start the phone with power and vol down, maybe that's enough to boot into the rom.)
However if you boot into rom a whole new set of nightmares would greet you. Phone always silent etc. (Yet you might be able to use button remapper to assign "nothing" to that button.)
If I were you I would pop out battery and put the phone in slightly elevated temperature (white some free air movement) and hope it would completely dry out. That would probably enough to fix the switch. How long did you let your phone dry after "weting" it?
Stick your phone in rice with the battery out for a few days, then boot into Fastboot (back & power), and run a RUU. You can find one for your network from shipped-roms.com. Just make sure you download a Froyo one not an Eclair one.
Hmm, I've tried the rice method it doesn't work
I've left it for around 12 hours
I disassembled the whole and sever the volume circuit already :X
However.. it still doesn't work
It still forces me into hboot
I can't seems to get to fast boot either
It would be fine If i can gain control in hboot, so I can boot into recovery and boot into system.
I only want to save all my messages before.. dumping the phone :x
If there any other ways?
Thank you for the help
.tnm said:
Can't you move in hboot at all (vol up?)?
Have you tried vol down + power + trackball to reboot your phone? (This way you wouldn't start the phone with power and vol down, maybe that's enough to boot into the rom.)
However if you boot into rom a whole new set of nightmares would greet you. Phone always silent etc. (Yet you might be able to use button remapper to assign "nothing" to that button.)
If I were you I would pop out battery and put the phone in slightly elevated temperature (white some free air movement) and hope it would completely dry out. That would probably enough to fix the switch. How long did you let your phone dry after "weting" it?
Click to expand...
Click to collapse
ARGHH! I should have waited for your comment! I was too impatient the "vol down + power + trackball " works!!! Thank you very much.. although I don't have access to the volume controll.... but at least I have a phone that is working.. partially! Thank you very much!
woshiitcy said:
...
have a phone that is working.. partially! Thank you very much!
Click to expand...
Click to collapse
U can use ButtonRemapper (http://forum.xda-developers.com/showthread.php?t=850464) to assign volume functionality to other buttons. This only works within the booted rom, however.
.tnm said:
U can use ButtonRemapper (http://forum.xda-developers.com/showthread.php?t=850464) to assign volume functionality to other buttons. This only works within the booted rom, however.
Click to expand...
Click to collapse
Wow! Really thank you very much! At least I got a working phone
Thanks a lot!
.tnm said:
U can use ButtonRemapper (http://forum.xda-developers.com/showthread.php?t=850464) to assign volume functionality to other buttons. This only works within the booted rom, however.
Click to expand...
Click to collapse
Hmm.. do you have any idea of disabling the volume button?
I'm not sure, what happens if you edit volume down and set state to 'none' in remapper?
Or you can try editing
/system/usr/keylayout/bravo-keypad.kl
(needs root and system mounted as R/W)
and delete the characters after key 115 and key 114 (or maybe even delete both lines)
create a backup first (or if u use Root Explorer's Text editor it will create automatically create one before saving)
Oh, okay, thank you, once again, you have save my life!!
Tried the mapper, but phone keep restarting
Sent from my GT-P7300 using XDA
Sorry for the trouble again :x
It seems that when I lock my phone, the phone will automatically wakes up
I don't think it is the power button, as when I'm using my phone, my phone doesn't auto lock itself...
It just auto wakes
Is there any app, there can find which button is faulty?
Sent from my HTC Desire using XDA
What rom are you using?
In BCM (CM9 source) there are two options in settings/display at the bottom in wakeup options section: volume rocker wake and trackball wake. If you have those, uncheck them.
Dont think so, using a sense rom
http://forum.xda-developers.com/showthread.php?t=1200466
Sent from my GT-P7300 using XDA
bortak said:
Stick your phone in rice with the battery out for a few days
Click to expand...
Click to collapse
This would probably work if he didn't power the phone on - which he did. After that, damage has been done. In my liquid cooling my pc experience, if the short circuit happened, the game is over in 99% of the cases.
Sent from my HTC Desire using Tapatalk 2
erklat said:
This would probably work if he didn't power the phone on - which he did. After that, damage has been done. In my liquid cooling my pc experience, if the short circuit happened, the game is over in 99% of the cases.
Sent from my HTC Desire using Tapatalk 2
Click to expand...
Click to collapse
In fact bortak was talking about the 1%.
Any ideas? haed to lock my phone, no problem unlocking, weird!
Sent from my GT-P7300 using XDA
Hello!
I need some help, I have a problem with my Wildfire. When I press the power button, the screen does not wake up, only after I press it several times does it wake up, and other times I have to remove the battery to get it to work again. Tried the solution for brightness settings bug, it's not helping, tried factory reset, no help either. Also, when I press the power button, the back button, search, home and menu, all light up, but the screen is black. The ROM I'm using is DK Custom Froyo.
Does anyone know what to do?
Thanks in advance.
maybe it is broken and doesn't work correctly. when u press trackball then ur screen is waking?? if not then flashing rom again could help
Sent from my HTC Wildfire using xda app-developers app
drewniany92 said:
maybe it is broken and doesn't work correctly. when u press trackball then ur screen is waking?? if not then flashing rom again could help
Sent from my HTC Wildfire using xda app-developers app
Click to expand...
Click to collapse
I tried pressing the trackball, but nothing happens, I will try flashing my ROM, I was going to flash it as a last resort, but thanks for your advice.
I'll let you know if it helps to reflash.
little_tincek said:
Hello!
I need some help, I have a problem with my Wildfire. When I press the power button, the screen does not wake up, only after I press it several times does it wake up, and other times I have to remove the battery to get it to work again. Tried the solution for brightness settings bug, it's not helping, tried factory reset, no help either. Also, when I press the power button, the back button, search, home and menu, all light up, but the screen is black. The ROM I'm using is DK Custom Froyo.
Does anyone know what to do?
Thanks in advance.
Click to expand...
Click to collapse
It could also be that your min CPU frequency is set too low.
Sgt.Incontro said:
It could also be that your min CPU frequency is set too low.
Click to expand...
Click to collapse
Reflashing didn't help, I'll try modifying the CPU frequency.
Yesterday, I turned the phone off and it took me 4 hours to power it back on, when I pressed the power button, it just vibrated once and that's it, and when I tried to power it with volume up and power, it vibrated 3 times and green led turned on but nothing more, volume down and power gave me no reaction on the phone, I think that my Wildfire is probably getting to the point of no return, so to speak.