ok guys I have tried just about all threads and searches,I been at this since 9 am and still no results.I need to take my phone in so I need the S-on,I was on Synergy Rom tried to use unrevoked forever which didnt work I was on amon ra recovery but switched to clockwork where I had backups and tried unrevoked forever and still no S-on, My software info is as follows : baseband:2.15.00.05.02
software #3.29.651.5 and pri version is 2.15_003 : My hboot is 0.97.0000, I unrooted actuallly a couple of times and never had this problem followed the directions before and they worked to perfection.I believe the problems exist with my radio # as this is the error that my recovery is giving me : stating unsupported radio version .Any help please thank you
Downgrade your radio to an unrevoked compatible version. Then flash unrevoked forever. Should be that simple.
Sent from my PC36100 using XDA Premium App
Try downgrading your radio first to the version that came with 3.29 so it matches the software. Don't worry about the S-ON. Leave it off that way when u take it in even if anyone applies some sort of update you will still be good. Also, did you use unrevoked originally to obtain s-off?
Do Flash only the radio ? Meaning I found the correct radio do I have to worry about my wimax keys or does in come with the radio I'll be flashing ?
1) You're trying to get it s-on, but you're flashing unrevoked forever. Unrevoked forever gives you s-off, you'd need the s-on tool instead.
2) Sprint will service your phone if it is s-off, so leave it off to keep the possibility of rooting open. If the store tells you otherwise, tell them to double check Sprint's policy.
3) You will however need to flash it back to stock unrooted. Run an RUU from your computer or as a PC36IMG through your bootloader to achieve this.
Bonus - Even if your phone has to be replaced, hopefully Sprint/HTC/whoever won't flash it back to s-on and someone on xda will get lucky and get your s-off refurb. Either way I wouldn't bother with the s-on tool, just run the RUU and you'll be set.
Sent from my PC36100 using Tapatalk
jayo1978 said:
Do Flash only the radio ? Meaning I found the correct radio do I have to worry about my wimax keys or does in come with the radio I'll be flashing ?
Click to expand...
Click to collapse
Just flash the stand alone radio. Not a combo with the wimax pri and NV. Then unrevoked forever will work.
Sent from my PC36100 using XDA Premium App
plainjane said:
1) You're trying to get it s-on, but you're flashing unrevoked forever. Unrevoked forever gives you s-off, you'd need the s-on tool instead.
2) Sprint will service your phone if it is s-off, so leave it off to keep the possibility of rooting open. If the store tells you otherwise, tell them to double check Sprint's policy.
3) You will however need to flash it back to stock unrooted. Run an RUU from your computer or as a PC36IMG through your bootloader to achieve this.
Bonus - Even if your phone has to be replaced, hopefully Sprint/HTC/whoever won't flash it back to s-on and someone on xda will get lucky and get your s-off refurb. Either way I wouldn't bother with the s-on tool, just run the RUU and you'll be set.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Why did you take the time to write out a long reply when you clearly didn't read his entire post. He has the gingerbread radio. He can't use the s-on tool until he downgrades to a compatible radio.
Sent from my PC36100 using XDA Premium App
Rem3Dy said:
Why did you take the time to write out a long reply when you clearly didn't read his entire post. He has the gingerbread radio. He can't use the s-on tool until he downgrades to a compatible radio.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
He is saying to leave S-Off, just RUU so it will be stock unrooted. Leaving it S-Off so that if some poor chap receives the phone refurbished, he won't have to worry if it is Gingerbread unrootable, as it is S-Off.
Related
Hey all.
I am not ready to turn s-off yet. But I want to upgrade my radio.
The problem is when I try and use the same pg3img file I used to go to stock when I first went to 2.05 it tells me "main is older. Update failed"
And then I have to reboot.
So does anyone know what I am doing wrong. Do I need another pg3img file (can they only be used once?)
Or did I just mess something up?
Any help appreciated.
Sent from my ADR6300 using XDA App
Mean Sixteen said:
Hey all.
I am not ready to turn s-off yet. But I want to upgrade my radio.
The problem is when I try and use the same pg3img file I used to go to stock when I first went to 2.05 it tells me "main is older. Update failed"
And then I have to reboot.
So does anyone know what I am doing wrong. Do I need another pg3img file (can they only be used once?)
Or did I just mess something up?
Any help appreciated.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
from what i understand you need to have s-off to flash to 2.15
wowthatisrandom said:
from what i understand you need to have s-off to flash to 2.15
Click to expand...
Click to collapse
Correct. The whole process of flashing the 2.15 radio depends on the signature checking system within the bootloader to be disabled.
Thanks to both of you.
I didn't know this was the case.
Guess I will have to seriously consider turning s-off.
Sent from my ADR6300 using XDA App
It's easy as pie. If your inc has clockwork mod it can seriously be done in less than five minutes, along with that you can flash a stock recovery in case you have to return the phone.
Sent from my ADR6300 using XDA App
s-off, 2.15 radio, skyrider 2.2 = all within 15mins or less i think.
I may have to exchange my phone is why I am hesitating on the s-off.
I understand once that is done I can never truly go back to stock. At least not s-on anyway.
Sent from my ADR6300 using XDA App
Mean Sixteen said:
I may have to exchange my phone is why I am hesitating on the s-off.
I understand once that is done I can never truly go back to stock. At least not s-on anyway.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
You think the verizon guys are gonna find out if the flag is s-off or s-on?.. NO WAY!!..
As long as it boots and there is no water damage/screen damage.. you could be on Froyo for all they care!
The pbing file wont work because it consists of an older radio and hboot. The phone wont let you downgrade your radio unless you have NAND unlocked and S-off. The only way to get the 2.15 radio i think is to have S-off. Hope this helps
mikeacela said:
The pbing file wont work because it consists of an older radio and hboot. The phone wont let you downgrade your radio unless you have NAND unlocked and S-off. The only way to get the 2.15 radio i think is to have S-off. Hope this helps
Click to expand...
Click to collapse
It actually doesn't work because the zip isn't signed with the correct signatures, so HBOOT won't flash it.
I just unrooted my phone by running the RUU update for 3.29.xxx and at bootloader screen, it is still showing S-OFF. Shouldn't it be S-ON? I'd appreciate some feedback as I am heading back to the sprint store and want to be sure the phone is completely unrooted. I recall the other time I ran this same procedure, it went back to S-ON.
TIA
You need to flash the Unrevoked s-on tool. It can be found in several unrooting threads.
Sent from my PC36100 using XDA App
TheMagicalSock said:
You need to flash the Unrevoked s-on tool. It can be found in several unrooting threads.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Thanks. I suspect it was the tool I used to root that had the Unrevoked component (never had this problem first time around); should've read the fine print...
Sent from my PC36100 using XDA App
so you need to re-root (maybe with unrevoked even) and then flash the s-on tool through recovery. it can be found in the unrevoked wiki. after that, then run the ruu.
dkdude36 said:
so you need to re-root (maybe with unrevoked even) and then flash the s-on tool through recovery. it can be found in the unrevoked wiki. after that, then run the ruu.
Click to expand...
Click to collapse
Yup.... exactly. Thanks.....highly appreciated. I guess this explains why most prefer not to use the Unrevoked method.
Sent from my PC36100 using XDA App
glad i could help. another reason people dont like unrevoked is it is now outdated. if you run it with the new protected hboot 2.02, you will get screwed pretty bad.
it used to save people hours of struggle, now it kills ruthlessly (haha)
Just flash this as PC36IMG.zip:
http://goo-inside.me/evo/stock/RUU_...0.09.01_NV_1.77_003_release_154209_signed.zip
drmacinyasha said:
Just flash this as PC36IMG.zip:
http://goo-inside.me/evo/stock/RUU_...0.09.01_NV_1.77_003_release_154209_signed.zip
Click to expand...
Click to collapse
Does this downgrade HBOOT to .76.2000? If not, please list the exact steps + files to use. I have copies of Hboot_0.76.2000.zip and Hboot_2.02.0001-Patch but not sure of the other in which to flash them.
Thanks.
EDIT: I was able to get back S-ON, although I observed that bootloader doesn't show the updated value after flashing the unrevoked-s-on zip; not until you attempt to flash the stock PC36IMG file. The above RUU allowed me complete the unrooting process (now with hboot 2.02).
I guess the other pressing question is why do I need hboot 2.02 and not .93 or .76.2000?
Ok so all I want to do is remove my unrevoked rooting from my phone. I did the one click, not the forever. Can anyone help me remove it? I have all stock roms. Just did unrevoked to add the wireless teetering. THANK YOU
Sent from my PC36100 using XDA App
si_sedan07 said:
Ok so all I want to do is remove my unrevoked rooting from my phone. I did the one click, not the forever. Can anyone help me remove it? I have all stock roms. Just did unrevoked to add the wireless teetering. THANK YOU
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
its real easy flash the unrevoked s-on tool untill the bootloader says s-on it may take more than one time it may not after that flash the ruu with the build that came with your phone
So I download the file to my card then what? I'm lost here sorry
Sent from my PC36100 using XDA App
Unrevoked 3.21/3.22 automatically runs Unrevoked Forever after the rooting is done (this is the very last step of the process before your phone boots up). That's why you end up getting NAND unlocked (S-OFF).
So you are looking to go back to stock and do not want to run Wireless Tethering anymore yes?
Download the S-ON tool and place it on the root of your SDcard (not in any folders). Go into recovery and flash the S-ON file and it hopefully should make your phone S-ON again.
Thank you. I'll try that! I'll let you know.
Sent from my PC36100 using XDA App
So it flashed the s-on and no luck. Done it twice ashtray and no luck. Should I keep trying?
Sent from my PC36100 using XDA App
http://unrevoked.com/rootwiki/doku.php/public/forever
From the unrevoked forever wiki page, it says to download the s-on.zip and flash it. If its not working, try re-downloading another unrevoked-forever-son.zip file and try again, otherwise I'm not sure what else to tell you, sorry.
[GUIDE] How to Unroot the EVO in 2 STEPS
This unroot guide written by djR3Z says to keep trying until it works.
Do you have radio version 2.15.00.11.19? I know you cannot S-OFF while on this radio version, so maybe you cannot S-ON either.
You will need to downgrade the radio first to 2.15.00.09.01. My real suggestion is to flash the mtd-eng.img hack, RUU back to 3.30, S-ON, RUU to 3.70.
I just finished! Had to flash a recovered rom. Stock rom that is. It was quite the process but I did it! Thanks for the help everyone!
Sent from my PC36100 using XDA App
I just tried to unroot my htc evo. Initially I has S-OFF, so I applied the S-ON patch, this changed me to S-ON. I then tried to flash PC36IMG.zip from and I was getting Main version is older. It looks like I am running hboot 0.93.0000. Any help is appreciated.
http://forum.xda-developers.com/showthread.php?t=780141
Which pc36img.zip did you download, from this link?
Sent from my PC36100 using Tapatalk
I downloaded the one in the thread. I was doing some searching and maybe this has to do with my hboot version? I was able to restore a nandroid backup, so I'm back at CM7, but I need to unroot so I can get the lcd on my phone fixed.
My buddy just unrooted his evo as well for the same issue, we just compared the radio and hboot version. Both are running hboot 0.93.0000, the difference is on the radio versions, mine is 2.15.00.11.19 his is 2.15.00.07.28. So is the "Main Version in older" error happening because of the radio version?
joshmeyer31 said:
I downloaded the one in the thread. I was doing some searching and maybe this has to do with my hboot version? I was able to restore a nandroid backup, so I'm back at CM7, but I need to unroot so I can get the lcd on my phone fixed.
Click to expand...
Click to collapse
If you want to completely unroot just flash the s-on then run the ruu exe file. Make sure you have htc sync installed. It might be easier this way. Try running it in bootloader in fastboot mode. Just a suggestion......
http://goo-inside.me/supersonic/sto...0.09.01_NV_1.77_CNV_release_150224_signed.exe
Sent from my PC36100 using Tapatalk
So when you say completely unroot, will that cause me any issues on rooting again? I will want to root again once I get my phone fixed.
joshmeyer31 said:
So when you say completely unroot, will that cause me any issues on rooting again? I will want to root again once I get my phone fixed.
Click to expand...
Click to collapse
If you unroot you WILL be able to root again as long as you don't accept the OTA GB update. Accepting the ota will leave without root for good.....at least until a new method is achieved.
Sent from my PC36100 using Tapatalk
My current image version is 3.70.651.1 and this updater is for 3.29.651.5, i ran it and it doesn't let me go backwards.
Just run the 3.70 ruu.
Sent from my PC36100 using XDA Premium App
joshmeyer31 said:
My buddy just unrooted his evo as well for the same issue, we just compared the radio and hboot version. Both are running hboot 0.93.0000, the difference is on the radio versions, mine is 2.15.00.11.19 his is 2.15.00.07.28. So is the "Main Version in older" error happening because of the radio version?
Click to expand...
Click to collapse
I'm sure by now you have found out that yes, the radio version does make a difference, downgrade your radio to get the son.
the 3.70 ruu did the trick, thanks for the help guys
I tried to root my husbands htc evo phone but it was interrupted and was not able to try again. He was able to update the software when sprint sent it out but somehow when I went into his bootloader it has S-OFF. I need to return the phone to sprint. Is there any way I can turn S-ON again?
How were u trying to root? Which process?
Taking my experience into account:
Ive been rooted with unrEVOked...and unrooted using the Stock RUU zip. BUT....prior to that...S-on needs to be recovered. The process in which Ive used was following the enclosed link.
Hope it helps...good luck.
http://forum.xda-developers.com/showthread.php?t=780141
tgeigel said:
I tried to root my husbands htc evo phone but it was interrupted and was not able to try again. He was able to update the software when sprint sent it out but somehow when I went into his bootloader it has S-OFF. I need to return the phone to sprint. Is there any way I can turn S-ON again?
Click to expand...
Click to collapse
If it is S-OFF, just run a stock RUU EXE file... 3.70 seems to work just fine. it will return the device to complete stock, including the bootloader for 3.70 release/ship.
The only way to get s-off to s-on is to flash the unrevoked s-on tool. You can run the RUU all you want and return the partitions to stock, s will still remain off. Well it should anyhow, strange things happen sometimes...
That link in the second post gives you both. Flash s-on then flash the RUU, dont go the other way around...
I was rooting using unrevoked but somehow it got interrupted and didn't finish the process. This was before he update his phone
Even though the phone has the updated software?
Sent from my PC36100 using XDA App
tgeigel said:
I was rooting using unrevoked but somehow it got interrupted and didn't finish the process. This was before he update his phone
Even though the phone has the updated software?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Is the phone stock currently? If so just flash the s-on tool, it should work (though I havent heard anyone attempting this yet). If you need to return partitions to stock or an older version of android then run the RUU.
also PM a Mod and ask them to move this to Q please, only post developed work in the DEVELOPMENT section...
tgeigel said:
I was rooting using unrevoked but somehow it got interrupted and didn't finish the process. This was before he update his phone
Even though the phone has the updated software?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Did the update change the Hboot version from 2.10 to 2.16?
Power off the phone, hold Vol Down and Power and wait for Bootloader to run to see which version is on the device.
evomattnc said:
The only way to get s-off to s-on is to flash the unrevoked s-on tool. You can run the RUU all you want and return the partitions to stock, s will still remain off. Well it should anyhow, strange things happen sometimes...
That link in the second post gives you both. Flash s-on then flash the RUU, dont go the other way around...
Click to expand...
Click to collapse
This is wrong. I was S-OFF since June of 2010 when I bought it and rooted, I just recently had to return my device and get it swapped. I simply ran the RUU Exe, I then made sure to check because I didn't want to return it with S-OFF, and it was S-ON. I didn't run any S-ON Tool or anything else other than the RUU Exe.
Unknownforce said:
This is wrong. I was S-OFF since June of 2010 when I bought it and rooted, I just recently had to return my device and get it swapped. I simply ran the RUU Exe, I then made sure to check because I didn't want to return it with S-OFF, and it was S-ON. I didn't run any S-ON Tool or anything else other than the RUU Exe.
Click to expand...
Click to collapse
Thanks. Plz move this thread to QA sorry I posted in the wrong thread.
Sent from my PC36100 using XDA App
I tried to run the s-on tool but it says unsupported radio and it aborts
Sent from my PG86100 using XDA Premium App
Had the same problem so i just downgraded the radio but i need help because i turned s-on before installing stock rom and now i dont have a rom at all installed and i need to get it back to stock by today :0
BLiizz said:
Had the same problem so i just downgraded the radio but i need help because i turned s-on before installing stock rom and now i dont have a rom at all installed and i need to get it back to stock by today :0
Click to expand...
Click to collapse
You tried just resetting the phone? Like a data factory reset.
Sent from my PC36100 using XDA App
Run the ruu now...
BLiizz said:
Had the same problem so i just downgraded the radio but i need help because i turned s-on before installing stock rom and now i dont have a rom at all installed and i need to get it back to stock by today :0
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
You get yours fixed t geigel?
tgeigel said:
You tried just resetting the phone? Like a data factory reset.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
Youre wrong...unless you upgraded your hboot with the ruu. We usually use the ruu for your hboot...I need you to talk less now...
Unknownforce said:
This is wrong. I was S-OFF since June of 2010 when I bought it and rooted, I just recently had to return my device and get it swapped. I simply ran the RUU Exe, I then made sure to check because I didn't want to return it with S-OFF, and it was S-ON. I didn't run any S-ON Tool or anything else other than the RUU Exe.
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
evomattnc said:
You get yours fixed t geigel?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
No my computer was not reading my phone properly and it wasn't downloading the driver either. So I just decided to send the phone back to sprint with the s-off. I ran the ruu and it didn't connect to my phone
Sent from my PC36100 using XDA App
ok so i have my s-on and i ran the pc36img and my phone is still rooted am i doing something wrong i need to take it back to the store so i can get my 3d today
I have run the stock ruu on my phone and it unrooted and was back to S-on with no problem.
evomattnc said:
Youre wrong...unless you upgraded your hboot with the ruu. We usually use the ruu for your hboot...I need you to talk less now...
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
"Hell I don't know anymore"
Unknownforce said:
This is wrong. I was S-OFF since June of 2010 when I bought it and rooted, I just recently had to return my device and get it swapped. I simply ran the RUU Exe, I then made sure to check because I didn't want to return it with S-OFF, and it was S-ON. I didn't run any S-ON Tool or anything else other than the RUU Exe.
Click to expand...
Click to collapse
The reason yours switched to s-on is because the root method you used included the ENG bootloader. If the root method included unrevoked forever then the only way to achieve s-on is with the s-on tool. So no, he wasn't wrong he could have been more thorough in his explination that's all.
Sent from my PC36100 using XDA Premium App