Develop Bugs

Needing help to turn S-ON to S-OFF HTC Desire

Phone : HTC Desire White GSM
ROM: Oxygen v2 RC6 Rooted
The guide: http://alpharev.nl/
I cant understand what to do, can somebody help me? what shall i download?
2) Verify the MD5SUM of the file you downloaded against the one in the table. CANT UNDER THIS
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
What shall i download there?
bravo_alphaspl-oxygen.img PB99IMG_bravo_oxygen
which files shall i burn and boot up?
which stock rom shall i use for the operation?

More reading, less asking.
There is a tutorial thread in development, if you read that and still don't understand what to do don't even think about S-offing you phone.
Sent from my HTC Desire using XDA App

You again...We are not a helpdesk if you are to lazy to search.

Read or brick.
you dont do that with a device thats s-on, there is an iso and you burn it to cd and boot, plug in the device and let it doe its thing
RTFM

kakashi-jk3 said:
Phone : HTC Desire White GSM
ROM: Oxygen v2 RC6 Rooted
The guide: http://alpharev.nl/
I cant understand what to do, can somebody help me? what shall i download?
2) Verify the MD5SUM of the file you downloaded against the one in the table. CANT UNDER THIS
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
What shall i download there?
bravo_alphaspl-oxygen.img PB99IMG_bravo_oxygen
which files shall i burn and boot up?
which stock rom shall i use for the operation?
Click to expand...
Click to collapse
Why do you want s-off? Just for fun I think..U dont need it if u dont know nothing about MD5, fastboot, etc..U will brick ur phone of course

I was wondering the same when I did this. Instructions arn't that great (at least not on AlphaRev's site). Just download the reflash utility and then you boot it as an OS. It runs off TinyCore.

if you use the forum post created for alpharev it tells you all you need to know

kakashi-jk3 said:
Phone : HTC Desire White GSM
ROM: Oxygen v2 RC6 Rooted
The guide: http://alpharev.nl/
I cant understand what to do, can somebody help me? what shall i download?
2) Verify the MD5SUM of the file you downloaded against the one in the table. CANT UNDER THIS
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
What shall i download there?
bravo_alphaspl-oxygen.img PB99IMG_bravo_oxygen
which files shall i burn and boot up?
which stock rom shall i use for the operation?
Click to expand...
Click to collapse
I have written an extensive article on this, which you can find here:
http://www.addictivetips.com/mobile/gain-s-off-on-htc-desire-gsm-with-alpharev-1-8-custom-hboot/
I used this method to gain S-OFF on the Desire that I am using and decided to write a guide for newbies on it, after going through a lot of guides here and elsewhere, where the writers assumed the reader knew much of the stuff already.

i dont see whats so hard about the current guides
BURN THE ALPHAREV.ISO TO CD
PUT IT IN PC
BOOT VIA CD
WAIT TILL PROMPTED TO CONNECT DEVICE
CONNECT DEVICE
UNPLUG DEVICE WHEN FINISHED
its literally that !!! whats difficult
if you find that difficult sell phone and sell computer as you cant boot from cd

Rastaman-FB said:
i dont see whats so hard about the current guides
BURN THE ALPHAREV.ISO TO CD
PUT IT IN PC
BOOT VIA CD
WAIT TILL PROMPTED TO CONNECT DEVICE
CONNECT DEVICE
UNPLUG DEVICE WHEN FINISHED
its literally that !!! whats difficult
if you find that difficult sell phone and sell computer as you cant boot from cd
Click to expand...
Click to collapse
shall i only use the alpharev flash? or shall i download the oxygen thing to?

cm7r2

just tried to flash alpharev cm7r2 file using android flasher. In hboot mode it says alpharev cm7r2. I tried to boot into 4ext recovery but it says it fails to fetch recovery log. So I cant use recovery and if I try to use android flasher to flash recovery again or hboot it stops responding. What should I do?
Any help and I would be very grateful.

Assume that you are s-off.
Can you still get you h-boot screen?
If so you should be able to use fastboot to flash both recovery and h-boot.
I find it easier than android flasher.
There are plenty of guides about on using fastboot so would suggest reading them as well and have a search about as wont be the first to encounter this issue
Also use fastboot to wipe system and cache and reboot the bootloader and you should be fine......
There is a thread on android forum about e: failure to get recovery log
Check it out
sent from my Oxygen desire

paul8944 said:
Assume that you are s-off.
Can you still get you h-boot screen?
If so you should be able to use fastboot to flash both recovery and h-boot.
I find it easier than android flasher.
There are plenty of guides about on using fastboot so would suggest reading them as well and have a search about as wont be the first to encounter this issue
Also use fastboot to wipe system and cache and reboot the bootloader and you should be fine......
There is a thread on android forum about e: failure to get recovery log
Check it out
sent from my Oxygen desire
Click to expand...
Click to collapse
Yes i am s-off and I can get to the hboot screen. Where do I download terminal from if I have to use that to use fastboot?
Thanks for the reply

Have a read of this thread
http://androidforums.com/desire-all...fastboot-windows-updated-1st-june-2011-a.html
It explains how to set up fastboot. The adb part is not relevant so once set up you can use commands like
Fastboot flash hboot c:\*****.img
Fastboot flash recovery
Fastboot erase
Which should enable you to change your hboot, recovery etc
The following link is a good step guide to changing your hboot along with a utility to set up fastboot
http://forum.oxygen.im/viewtopic.php?id=1412
And I would also highly recommend the oxygen rom
sent from my Oxygen desire

paul8944 said:
Have a read of this thread
http://androidforums.com/desire-all...fastboot-windows-updated-1st-june-2011-a.html
It explains how to set up fastboot. The adb part is not relevant so once set up you can use commands like
Fastboot flash hboot c:\*****.img
Fastboot flash recovery
Fastboot erase
Which should enable you to change your hboot, recovery etc
sent from my Oxygen desire
Click to expand...
Click to collapse
When setting up the computer for fastboot it does not have enviroment variables in the advanced my computer bit. I am using windows vista

Follow this and it should work fine
How do I set up my Windows PC to use adb and fastboot?
Download SDK Tools only Open the .rar file, then drag and drop the folder "android-sdk-windows" to the C: drive Right click My computer > Properties > Advanced > Environment Variables under system variables click "path" and click "edit" at the end of the line add a sem semi colon ";" and without a space put C:\android-sdk-windows\tools -It should look like ;C:\android-sdk-windows\tools then click ok.
I assume you already have h-boot drivers installed (you need these to root with unrevoked) if not my previous post link has advice on how to do this
Update : I'm using vista as well so know this works
sent from my Oxygen desire

paul8944 said:
Follow this and it should work fine
How do I set up my Windows PC to use adb and fastboot?
Download SDK Tools only Open the .rar file, then drag and drop the folder "android-sdk-windows" to the C: drive Right click My computer > Properties > Advanced > Environment Variables under system variables click "path" and click "edit" at the end of the line add a sem semi colon ";" and without a space put C:\android-sdk-windows\tools -It should look like ;C:\android-sdk-windows\tools then click ok.
I assume you already have h-boot drivers installed (you need these to root with unrevoked) if not my previous post link has advice on how to do this
Update : I'm using vista as well so know this works
sent from my Oxygen desire[/QUO
Yep have now set the variables. What do I do next? I have read the post but it is very confusing. Thanks. I can open what I think is terminal - android sdk
Click to expand...
Click to collapse

Right
Click start > run > cmd
This will open a command window
Have you phone connected in fastboot mode
And then use fastboot commands to flash the recovery, hboot etc.
I would recommend changing your recovery to amon-ra ( but this is personnel choice)
You need the files you want to flash on you PC.
For example to flash an hboot you would use the following
Fastboot flash hboot c:\*****.Img
The same would apply for recovery etc
Fastboot flash recovery c:\*****.img
Once you have flashed hboot
Make sure you use fast boot to wipe system / cache / reboot bootloader.
Have a read of the oxygen.im link I posted on one of my previous posts in this thread.
Hope this has helped resolve your issue
sent from my Oxygen desire

paul8944 said:
Right
Click start > run > cmd
This will open a command window
Have you phone connected in fastboot mode
And then use fastboot commands to flash the recovery, hboot etc.
I would recommend changing your recovery to amon-ra ( but this is personnel choice)
You need the files you want to flash on you PC.
For example to flash an hboot you would use the following
Fastboot flash hboot c:\*****.Img
The same would apply for recovery etc
Fastboot flash recovery c:\*****.img
Once you have flashed hboot
Make sure you use fast boot to wipe system / cache / reboot bootloader.
Have a read of the oxygen.im link I posted on one of my previous posts in this thread.
Hope this has helped resolve your issue
sent from my Oxygen desire
Click to expand...
Click to collapse
I managed to open the command window but it said the command fastboot was not recognized (or something) internally or externally
Have I got the files in the correct places? Where should they be because I tried to follow the instructions very carefully?
Thanks so much for your help I hopefully nearly there!

right,
finally booted up my laptop so this should get easier for me.....
how did you root your phone, did you use unrevoked or did you s-off with revolutionary and then install the recovery that came with it.
Can you answer the following
You have the h-boot drivers installed ?
You have download and followed the steps for the SDK files.
You have set the environment variables as previously mentioned.
When you boot your phone holding down the volume button and power you get the hboot screen, can you then select fast boot. and with your phone connected to your pc does it change from fast boot to fastboot usb.
if so the commands should work. if not you could try the utility by _thalamus on the oxygen.im website
http://forum.oxygen.im/viewtopic.php?id=1412
You may want to change your recovery to amon-ra or an earlier version of clockworkmod 2.5.0 something....(i use amon-ra and rate it very highly, you can down load it from the following
http://androidforums.com/desire-all...oads-root-users-updated-22nd-july-2011-a.html)
if you can answer the above I will endeavor to assist further but why this is not setting up correctly on your pc is a bit confusing for me
but we'll keep going and get you back up and running again
UPDATE :
If your still struggling have a look at this trouble shooting guide it may be of assistance.
http://forum.xda-developers.com/showthread.php?t=1275632

Thanks so so much for your help but I will be away until prob wednesday afternoon so I will not be able to answer until then. I hope you will still be there!!!
I will check that I have followed the steps correctly and then I will reply.

Whoopeeeee!!!!!!!!!!
I managed to use android flasher to flash rmd recovery and it worked. So I have no installed runnymede aio 2.2 cm7r2 without a problem. Thank you so so much for your help Paul. xxxxxxx

RiThBo said:
Whoopeeeee!!!!!!!!!!
I managed to use android flasher to flash rmd recovery and it worked. So I have no installed runnymede aio 2.2 cm7r2 without a problem. Thank you so so much for your help Paul. xxxxxxx
Click to expand...
Click to collapse
Did you manage to change your hboot as well. ? As you can flash that as well with android flasher.
Glad to have been of assistance and if you want to try something different go for an aosp rom like oxygen which I find extremely smooth and fast.
Enjoy your rom and wait you flashing addiction to kick in and your be changing rom's, kernals and hboot on a weekly basis if not more
sent from my Oxygen desire

paul8944 said:
Did you manage to change your hboot as well. ? As you can flash that as well with android flasher.
Glad to have been of assistance and if you want to try something different go for an aosp rom like oxygen which I find extremely smooth and fast.
Enjoy your rom and wait you flashing addiction to kick in and your be changing rom's, kernals and hboot on a weekly basis if not more
sent from my Oxygen desire
Click to expand...
Click to collapse
Yes I did, I am now on cm7r2 with rmd recovery. Flashed both with android flasher.
Thank you again for your help

[Q] [Ask]CyanogenMod7.1 (Android 2.3.7)

hello to all Xda member.
im a newbie about CyanogenMod7.1 (Android 2.3.7)
i currently facing a problem about the insufficient internal memory of my Desire.
and i would like to ask that, arent that suppose those apps can be fully move into SD card?
becoz i saw n heard that rooted phone can do so.
is there any assistance to help me out here? thx guys.
i really hate short of internal memory.
btw, if i posted at the wrong section, pls move me to the correct section. thx.

are you s-off?
you can use different hboot to increase data partition or use a2sd script

just install from market an app called s2e
And move application and dalvik to ext!
You will have plenty of space.

Go to alpharev.nl and apply this Bravo Data++. You will have enough storage and your rom will be prepared for ICS.
--
Sent from my unstable ROM

i don understand la guys, can giv more guide n explanation?

changing hboot will provide a new partition layout
stock one:
system-250 MB
cache-40 MB
data-147 mb
CM7/r2:
system-145 MB
cache-5 MB
data-287 MB
So you can see the increase on data partition. As you running CM7.1 i would change hboot to cm7 or cm7r2(on alpharev.nl) depends on developer instruction

ClockWorkMod Recovery Problem..
Folks Would really appreciate some advice here stuck with a problem. I have two other phones I have installed custom ROMS on so got a little knowledge but Im a bit stuck with my daughters HTC desire..
I use revolutionary to S-off & aquire root. I then installed ROM manager & flashed latest ClockworkMod (ver 5.0.2.0). After that I copied CM7 & GBAPPS to the external SD card in preparation for the install. I then choose install ROM from SD card, the phone rebooted & nstalled CM7 but no google apps. NOW when i boot into recovery and select install zip from file I only get a clockwork logo so I am now stuck & dont know what to do really appreciate some help !!! Im panicing !!

Don't panic. Go to recovery again. "back button + power button" and then select recovery. Wipe all, cache, dalvik and install again. Don't reboot. Install gapps also then reboot.
--
Sent from my Desire CM7 nightly

can you boot normally? if yes uzip the googleapps zip and copy/move them to app directory and reboot

jjjkkklll said:
i don understand la guys, can giv more guide n explanation?
Click to expand...
Click to collapse
Download Ubuntu Linux or any other live system. Run it. Download fastboot program. Run terminal. Enter 'chmod 777 fastboot' in terminal . Put your phone in hboot mode. "back button + power button" attach USB to your phone and PC. Run ./fastboot --help in terminal to see options.
--
Sent from my Desire CM7 nightly
---------- Post added at 10:44 PM ---------- Previous post was at 10:00 PM ----------
Now I'm at my PC so I can be more specific. Fastboot is a program that you need to download. You can find it on web. It runs on Linux OS. So you need some Linux distribution. Try linux mint debian (my favorite) or Ubuntu. You don't have to install it, just run it in Live mode. After you boot Linux in Live mode, download fastboot-linux program and bravo_alphaspl-data.img from alpharev.nl site. In programs find terminal. Enter these commands and press enter
- sudo su
- cd Download (or where you have downloaded the fastboot-linux and bravo_alphaspl-data.img) files
- chmod +x fastboot-linux
Power up your HTC with "back button and power button" and connect it with your PC with USB cable
Finaly enter this command
./fastboot-linux flash hboot bravo_alphaspl-data.img
That's it. You should see some info in terminal. I'm a Linux sys admin and first time I didn't understand it also what the heck is going on. AlphaRev should make their docs better.
Hope it helps.

Unrevoked Can not Get Root . Is there an Alternative ?????
People/Gurus
Yesterday got one HTC Desire off stock & running CM7 but having problems with my other daughters....
Procedures that lead me to this point
1. Installed revolutionary & gained S-OFF.
2. Used unrevoked 3 to try & gain root but have been unable to do so. All looks good till near the end when it says "running root" then a message that says "Error: failed to get root. Is your firmware too new ?"
I am desparately needing some advice. Yesterdays went fine, with a little help from you angels of mercy !! Now I need you all again :-(
Thanks for reading
John

did you flash zip file from question 4 from http://unrevoked.com/rootwiki/doku.php/public/revolutionary
?

kotag82 said:
did you flash zip file from question 4 from http://unrevoked.com/rootwiki/doku.php/public/revolutionary
?
Click to expand...
Click to collapse
I did not. The reason why I did not was because I had read a post that said the CMW recovery that comes with revolutionary can be ignored, so I did not install it. My intention was to install ROM Manager & insall newest version of CWM from there, but now I cannot boot into recovery to install the zip. Is there another way ?

flash one of recoveries(via fastboot) from my signature then flash the zip... without recovery you can push files via adb to proper location then change permission but recovery is safer way and not painful...
See bortak guide step 10

kotag82 said:
flash one of recoveries(via fastboot) from my signature then flash the zip... without recovery you can push files via adb to proper location then change permission but recovery is safer way and not painful...
See bortak guide step 10
Click to expand...
Click to collapse
Can I ask your advice on one other thing please. During this adventure I have noticed many references to PVT4 and a size of 40000. This has caused me a little concern as mine does show PVT4 but cat /proc/mdc shows 20000 should I still be able to go ahead safely ?

One of mine is 40000 using rmd and 20000 I was using both rmd and touch recovery without any problem, I think it is related to old cwm recovery 2.x.x.x risk of sdcard and USB brick
Sent from my HTC Runnymede using XDA Premium App

kotag82 said:
One of mine is 40000 using rmd and 20000 I was using both rmd and touch recovery without any problem, I think it is related to old cwm recovery 2.x.x.x risk of sdcard and USB brick
Sent from my HTC Runnymede using XDA Premium App
Click to expand...
Click to collapse
Yeah, just found that via google... Just clicked your thanks metre, all good and working, really really really REALLY appreciate your time & patience, thanks again m8..

Welcome anytime
Sent from my HTC Runnymede using XDA Premium App

mlerota said:
Download Ubuntu Linux or any other live system. Run it. Download fastboot program. Run terminal. Enter 'chmod 777 fastboot' in terminal . Put your phone in hboot mode. "back button + power button" attach USB to your phone and PC. Run ./fastboot --help in terminal to see options.
--
Sent from my Desire CM7 nightly
---------- Post added at 10:44 PM ---------- Previous post was at 10:00 PM ----------
Now I'm at my PC so I can be more specific. Fastboot is a program that you need to download. You can find it on web. It runs on Linux OS. So you need some Linux distribution. Try linux mint debian (my favorite) or Ubuntu. You don't have to install it, just run it in Live mode. After you boot Linux in Live mode, download fastboot-linux program and bravo_alphaspl-data.img from alpharev.nl site. In programs find terminal. Enter these commands and press enter
- sudo su
- cd Download (or where you have downloaded the fastboot-linux and bravo_alphaspl-data.img) files
- chmod +x fastboot-linux
Power up your HTC with "back button and power button" and connect it with your PC with USB cable
Finaly enter this command
./fastboot-linux flash hboot bravo_alphaspl-data.img
That's it. You should see some info in terminal. I'm a Linux sys admin and first time I didn't understand it also what the heck is going on. AlphaRev should make their docs better.
Hope it helps.
Click to expand...
Click to collapse
hey there bro, any page / thread which give me a full guide? coz im new. =(

[Q] Wildfire s unroot?

hello,
I want to unroot my WFS if possible.
I got Android 2.3.5 and clockworkk recovery, which I want to 'delete'.
So to make a long story short, I want it back as I bought it, if possible .
stbe.

relock your bootloader first
then flash stock ruu
you will be unrooted
to flash stock recovery,extract recovery.img from stock ruu and place it in c:\
connect your phone to pc in fastboot mode (you should have android sdk installed)
open cmd and type "cd c:\" without quotes
type fastboot flash recovery recovery.img
now you should have stock recovery

umair42 said:
relock your bootloader first
then flash stock ruu
you will be unrooted
to flash stock recovery,extract recovery.img from stock ruu and place it in c:\
connect your phone to pc in fastboot mode (you should have android sdk installed)
open cmd and type "cd c:\" without quotes
type fastboot flash recovery recovery.img
now you should have stock recovery
Click to expand...
Click to collapse
Thanks dude, worked perfectly fine for me
Sent from my HTC Wildfire S A510e using XDA

Guitarfreak12 said:
Thanks dude, worked perfectly fine for me
Sent from my HTC Wildfire S A510e using XDA
Click to expand...
Click to collapse
"recovery.img" command will flash ur recovery that is cwm.
For stock rom again you have to run.thsi command
"fastboot flash system system.img"
Hit thanks if u find me helpful........

rajanand said:
"recovery.img" command will flash ur recovery that is cwm.
For stock rom again you have to run.thsi command
"fastboot flash system system.img"
Hit thanks if u find me helpful........
Click to expand...
Click to collapse
No you are wrong!
Recovery.img from stock ruu is stock recovery.
If you flash system.img,it will not flash stock recovery but system partition which is stock and unrooted.
Click thanks if i help you.

You can also go to unlockroot.com download program, install. Enable usb debugging on ur device, connect it to your pc (charge only), click unroot and you are done!
Sent from my HTC Wildfire S A510e using XDA

umair42 said:
relock your bootloader first
then flash stock ruu
you will be unrooted
to flash stock recovery,extract recovery.img from stock ruu and place it in c:\
connect your phone to pc in fastboot mode (you should have android sdk installed)
open cmd and type "cd c:\" without quotes
type fastboot flash recovery recovery.img
now you should have stock recovery
Click to expand...
Click to collapse
Is it possible to get some "detailed" description how exactly to do this? I'm a newbie and I managed to root the phone, but now I want to un-root it, and I can't follow this instructions because I don't understand how to to this steps. So please, I'd be soooo grateful if you could do that... thx!

Fully unroot guide(only if you have original ruu)
tomtomek said:
Is it possible to get some "detailed" description how exactly to do this? I'm a newbie and I managed to root the phone, but now I want to un-root it, and I can't follow this instructions because I don't understand how to to this steps. So please, I'd be soooo grateful if you could do that... thx!
Click to expand...
Click to collapse
first of all for fully unroot you need stock ruu (like if your wfs model is european brand your stock ruu is eu 2.26.401.3 )
you can find it in android dev thread>marvel/marvelc stock ruu thread by jmztaylor
then run it on computer..(you can see now update wizard,dont close it)
now open task manager see processes you will see process named ARUwizard (something) right click and select open location.
now you will see temp folder is opened..you will find rom.zip in that folder..copy that zip file (its our stock ruu)
now you can close that update wizard because we got our rom.zip
now renamed rom.zip to PG76IMG.zip
now go to this thread
http://forum.xda-developers.com/showthread.php?t=1530864
and download bootloader control tool.
flash it from cwm recovery..
A Menu-type will appear. It will show you 4 options:
Unlock Bootloader
Lock Bootloader (Guarantee Mode)
Lock Bootloader (Relocked State)
Supervision
Now, choose 2 or 3 option.
Then say "NO" to reboot. Go back to the main menu of CWM.
It'll reboot the recovery and get you the main menu again.
then flash that tool again now choose supervision and reboot..
now time to make gold card.
go here,
http://www.mediafire.com/?hdxoe6e5km434tb
download it and put phone in debugging mode and select mmc00 mmc01 (try one by one till ones give u cid)
then put cid in given website and you will hv now goldcard.img
put it phone in usb mounting mode,and put that PG76IMG.zip on it and patch with goldcard.img
now just put that sdcard on your phone and wait...phone will detect zip and it ll asked for confirmation..say yes with volume up and you will be unrooted after sometimes(this process takes upto 5-10 min)
good luck
IMP NOTE :
AS GOLDCARD CREATION WEBSITE IS PROBABLY CLOSED,FOLLOW THIS TUTORIAL TO CREATE BOO.IMG AND THEN PATCH IT WITH GOLDCARDCREATOR
1) download this and extract it.
http://d-h.st/UGV
2) Start CMD as administrator.
3)Type, then press ENTER after each command:
Code:
cd c:\gcard
gcard.exe -r -c [COLOR="Indigo"]enteryourmmccode[/COLOR] -o Chiffinske.img
4) now rename chiffinske.img to boot.img and patch it with goldcard creator utility.
( thanks a lot to genepool to create this script so we can create boot.img without that website )
Click to expand...
Click to collapse
DISCLAIMER : I AM NOT RESPONCIBLE FOR BRICK YOUR DEVICE,DO AT YOUR OWN RISK
Click to expand...
Click to collapse

Removed
"You either die a hero or you live long enough to see yourself become the villain."
__________________________________
HTC Wildfire S
Android 2.3.5
Powered By HTC Sense
LG Optimus One (With Dad - Soon to be mine)

Hi
could u please link this "android dev thread>marvel/marvelc stock ruu thread by jmztaylor" for me?
I realy cand find it and i have to downgrade a Wildfire S Eu hardly
Thanks

Felix87 said:
Hi
could u please link this "android dev thread>marvel/marvelc stock ruu thread by jmztaylor" for me?
I realy cand find it and i have to downgrade a Wildfire S Eu hardly
Thanks
Click to expand...
Click to collapse
here is the list of RUU,
http://www.androidfiles.org/ruu/?developer=Marvel_MarvelC

Hi
Thanks a lot!!!
As I want only the ROM back. But staying Unlocked and Rooted (for things like Int2Ext) can I just flash the Rom.zip/PG76IMG.zip as a nomal ROM. Meaning "Install from SD" at the recovery mode.
Felix

Felix87 said:
Hi
Thanks a lot!!!
As I want only the ROM back. But staying Unlocked and Rooted (for things like Int2Ext) can I just flash the Rom.zip/PG76IMG.zip as a nomal ROM. Meaning "Install from SD" at the recovery mode.
Felix
Click to expand...
Click to collapse
Nope but you can look at crossfires signature. He has made some original Roms with root.
Sent from my Nexus 7 using xda app-developers app

[Q] help rooting and install custom ROM for phone already s-off

hello
I recently bought a htc desire hd and i want to root and install custom ROM (I prefer ROM with 4.04 android and sense 4.1 )
my htc
(ace pvt s-off
hboot_2.00.0027
microp_0438
radio-26.14.04.28_m
htc desire hd A9191
android 2.3.5
htc sense 3.0
program version 3.13.415.2
kernel 2.6.35.10 )
where i should start because i am new to root an install roms ????
and if i install android 4.04 is easy to return to android 2.35

You're S-Off. Just flash a recovery from fastboot (if you don't already have one), then a ROM from recovery.

bananagranola said:
You're S-Off. Just flash a recovery from fastboot (if you don't already have one), then a ROM from recovery.
Click to expand...
Click to collapse
i use this tool
http://forum.xda-developers.com/showthread.php?t=2169515
and it show ((
***********************************************
EASY ACE ROOT TOOL
glevitan 2013
************************************************
This tool will help you to unlock / relock your bootloader
To succeed make sure:
1. HTC drivers are correctly installed
2. USB debugging is enabled
adb, fastboot, md5sum, wget other utilities will be installed
Checking adb connectivity....
-------------------------------------------
1.Root HTC Inspire 4G / Desire HD
.Unlock Bootloader
.Flash CWM
.Install SU
2. Unlock Bootloader
3. Flash CWM Touch Recovery
4. Create Goldcard Image
5. Relock Bootloader
6. Quit
-------------------------------------------
[What do you want to do]1
Detecting phone model
If your Device is an HTC Desire HD / Inspire 4G select yes to continue, if NOT j
ust quit. FLASHING THE WRONG PARTITION WILL BRICK YOUR DEVICE!!!
1. Yes
2. No
[Continue?]1
Getting Build version
your build version is 3.13.415.2
In order to unlock the bootloader, your phone needs to update the hboot....
Downloading the new hboot from HTCDEV
--2013-09-06 18:26:12-- http://www.htcdev.com/ruu/PD9810000_Ace_Sense30_S_hboot
_2.00.0029.exe
Resolving www.htcdev.com... 54.243.194.179, 54.225.161.85
Connecting to www.htcdev.com|54.243.194.179|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 6177216 (5.9M) [application/x-msdos-program]
Saving to: `PD9810000_Ace_Sense30_S_hboot_2.00.0029.exe'
100%[======================================>] 6,177,216 99.7K/s in 75s
2013-09-06 18:27:31 (80.2 KB/s) - `PD9810000_Ace_Sense30_S_hboot_2.00.0029.exe'
saved [6177216/6177216]
hboot update utitity starting now....Do not unplug the phone
If the update was succesful, your phone should be restarting right now.
Make sure that usb debugging is still enabled and let the phone plugged
Your will reboot in fastboot again to continue the process
Obtaining Unlock Token
< waiting for device >
... INFO[ERR] Command error !!!
OKAY [ 0.008s]
finished. total time: 0.009s
Now copy the identifier token as shown here (use the right button of the mouse t
o choose mark and then press right button again to select)
then paste the token at the botton of the page and submit. Opening HTVDEV site
Press any key to continue . . .))
and after this the pc show me windows that update my htc system from
3.13.415.2 to 3.13.0.0
after that the bootloader show me above with pink color this words (LOCKED (OOW))
and when i click on recovery on my bootloader it show me same thing ((Red Arrow bleed exclamation point with a phone))
and after rebort my phone the su app never install
so what wrong i do ????

You're S-Off. You don't need that tool; it clearly states that it's for stock only. Just read what I said earlier.

bananagranola said:
You're S-Off. You don't need that tool; it clearly states that it's for stock only. Just read what I said earlier.
Click to expand...
Click to collapse
i am noob here so i do not understand how using fastboot to flash recovery and unlock the bootloader and the Previous tool
update the hbboot from hboot_2.00.0027 to hboot_2.00.0029
and i search for noob Thread and not found any thing

Like I said. You're S-Off. You don't need to unlock the bootloader. You don't need to update hboot. All you need to do is what I've already said. Ace Think Tank thread in DHD General has fastboot info.

bananagranola said:
Like I said. You're S-Off. You don't need to unlock the bootloader. You don't need to update hboot. All you need to do is what I've already said. Ace Think Tank thread in DHD General has fastboot info.
Click to expand...
Click to collapse
thank very much it is work for me and it was very easy now i will flash ViperDHD v2.3.0 rom
and greeting to glevitan for useful guide