[Q] Wildfire s unroot? - HTC Wildfire S

hello,
I want to unroot my WFS if possible.
I got Android 2.3.5 and clockworkk recovery, which I want to 'delete'.
So to make a long story short, I want it back as I bought it, if possible .
stbe.

relock your bootloader first
then flash stock ruu
you will be unrooted
to flash stock recovery,extract recovery.img from stock ruu and place it in c:\
connect your phone to pc in fastboot mode (you should have android sdk installed)
open cmd and type "cd c:\" without quotes
type fastboot flash recovery recovery.img
now you should have stock recovery

umair42 said:
relock your bootloader first
then flash stock ruu
you will be unrooted
to flash stock recovery,extract recovery.img from stock ruu and place it in c:\
connect your phone to pc in fastboot mode (you should have android sdk installed)
open cmd and type "cd c:\" without quotes
type fastboot flash recovery recovery.img
now you should have stock recovery
Click to expand...
Click to collapse
Thanks dude, worked perfectly fine for me
Sent from my HTC Wildfire S A510e using XDA

Guitarfreak12 said:
Thanks dude, worked perfectly fine for me
Sent from my HTC Wildfire S A510e using XDA
Click to expand...
Click to collapse
"recovery.img" command will flash ur recovery that is cwm.
For stock rom again you have to run.thsi command
"fastboot flash system system.img"
Hit thanks if u find me helpful........

rajanand said:
"recovery.img" command will flash ur recovery that is cwm.
For stock rom again you have to run.thsi command
"fastboot flash system system.img"
Hit thanks if u find me helpful........
Click to expand...
Click to collapse
No you are wrong!
Recovery.img from stock ruu is stock recovery.
If you flash system.img,it will not flash stock recovery but system partition which is stock and unrooted.
Click thanks if i help you.

You can also go to unlockroot.com download program, install. Enable usb debugging on ur device, connect it to your pc (charge only), click unroot and you are done!
Sent from my HTC Wildfire S A510e using XDA

umair42 said:
relock your bootloader first
then flash stock ruu
you will be unrooted
to flash stock recovery,extract recovery.img from stock ruu and place it in c:\
connect your phone to pc in fastboot mode (you should have android sdk installed)
open cmd and type "cd c:\" without quotes
type fastboot flash recovery recovery.img
now you should have stock recovery
Click to expand...
Click to collapse
Is it possible to get some "detailed" description how exactly to do this? I'm a newbie and I managed to root the phone, but now I want to un-root it, and I can't follow this instructions because I don't understand how to to this steps. So please, I'd be soooo grateful if you could do that... thx!

Fully unroot guide(only if you have original ruu)
tomtomek said:
Is it possible to get some "detailed" description how exactly to do this? I'm a newbie and I managed to root the phone, but now I want to un-root it, and I can't follow this instructions because I don't understand how to to this steps. So please, I'd be soooo grateful if you could do that... thx!
Click to expand...
Click to collapse
first of all for fully unroot you need stock ruu (like if your wfs model is european brand your stock ruu is eu 2.26.401.3 )
you can find it in android dev thread>marvel/marvelc stock ruu thread by jmztaylor
then run it on computer..(you can see now update wizard,dont close it)
now open task manager see processes you will see process named ARUwizard (something) right click and select open location.
now you will see temp folder is opened..you will find rom.zip in that folder..copy that zip file (its our stock ruu)
now you can close that update wizard because we got our rom.zip
now renamed rom.zip to PG76IMG.zip
now go to this thread
http://forum.xda-developers.com/showthread.php?t=1530864
and download bootloader control tool.
flash it from cwm recovery..
A Menu-type will appear. It will show you 4 options:
Unlock Bootloader
Lock Bootloader (Guarantee Mode)
Lock Bootloader (Relocked State)
Supervision
Now, choose 2 or 3 option.
Then say "NO" to reboot. Go back to the main menu of CWM.
It'll reboot the recovery and get you the main menu again.
then flash that tool again now choose supervision and reboot..
now time to make gold card.
go here,
http://www.mediafire.com/?hdxoe6e5km434tb
download it and put phone in debugging mode and select mmc00 mmc01 (try one by one till ones give u cid)
then put cid in given website and you will hv now goldcard.img
put it phone in usb mounting mode,and put that PG76IMG.zip on it and patch with goldcard.img
now just put that sdcard on your phone and wait...phone will detect zip and it ll asked for confirmation..say yes with volume up and you will be unrooted after sometimes(this process takes upto 5-10 min)
good luck
IMP NOTE :
AS GOLDCARD CREATION WEBSITE IS PROBABLY CLOSED,FOLLOW THIS TUTORIAL TO CREATE BOO.IMG AND THEN PATCH IT WITH GOLDCARDCREATOR
1) download this and extract it.
http://d-h.st/UGV
2) Start CMD as administrator.
3)Type, then press ENTER after each command:
Code:
cd c:\gcard
gcard.exe -r -c [COLOR="Indigo"]enteryourmmccode[/COLOR] -o Chiffinske.img
4) now rename chiffinske.img to boot.img and patch it with goldcard creator utility.
( thanks a lot to genepool to create this script so we can create boot.img without that website )
Click to expand...
Click to collapse
DISCLAIMER : I AM NOT RESPONCIBLE FOR BRICK YOUR DEVICE,DO AT YOUR OWN RISK
Click to expand...
Click to collapse

Removed
"You either die a hero or you live long enough to see yourself become the villain."
__________________________________
HTC Wildfire S
Android 2.3.5
Powered By HTC Sense
LG Optimus One (With Dad - Soon to be mine)

Hi
could u please link this "android dev thread>marvel/marvelc stock ruu thread by jmztaylor" for me?
I realy cand find it and i have to downgrade a Wildfire S Eu hardly
Thanks

Felix87 said:
Hi
could u please link this "android dev thread>marvel/marvelc stock ruu thread by jmztaylor" for me?
I realy cand find it and i have to downgrade a Wildfire S Eu hardly
Thanks
Click to expand...
Click to collapse
here is the list of RUU,
http://www.androidfiles.org/ruu/?developer=Marvel_MarvelC

Hi
Thanks a lot!!!
As I want only the ROM back. But staying Unlocked and Rooted (for things like Int2Ext) can I just flash the Rom.zip/PG76IMG.zip as a nomal ROM. Meaning "Install from SD" at the recovery mode.
Felix

Felix87 said:
Hi
Thanks a lot!!!
As I want only the ROM back. But staying Unlocked and Rooted (for things like Int2Ext) can I just flash the Rom.zip/PG76IMG.zip as a nomal ROM. Meaning "Install from SD" at the recovery mode.
Felix
Click to expand...
Click to collapse
Nope but you can look at crossfires signature. He has made some original Roms with root.
Sent from my Nexus 7 using xda app-developers app

Related

STOCK EU 2.3.5 Request

Hi, I accidentally deleted my stock rom image from cwm recovery and I'd like to go back to stock as I'm currently on CM 7.2. So I was wondering if someone could make image of it via cwm and upload it somewhere for me. Or is there any other way to go back? ( I couldn't find any )
Many thanks.
Just use the search function for the Latest Ruu in this section of the forum, flash it and you will revert to stock, read the thread in the link below, good luck
http://forum.xda-developers.com/showthread.php?t=1431969
Sent via Tapatalk
Aef 101 said:
Just use the search function for the Latest Ruu in this section of the forum, flash it and you will revert to stock, read the thread in the link below, good luck
http://forum.xda-developers.com/showthread.php?t=1431969
Sent via Tapatalk
Click to expand...
Click to collapse
No luck with that,and I've tried few different Ruu's,every time I get error 155. Got any other idea?
Hi,
No need to worry, try this way:
(1) Download the PG76IMG.ZIP (Stock ROM) available from this thread. Extract the "system.img" file next.
(2) Make sure, your WFS can connect to your computer. If so, go to your phone's bootloader next, and choose "FASTBOOT". Then push the system.img image file to your phone as follows:
fastboot flash system system.img
Click to expand...
Click to collapse
Voilá. Now shutdown your phone and turn it on again. You WFS2 should boot into the Stock ROM. Please let us know if this worked for you. Thank you
Kind regards, meshua
Nope,still no luck. It installed Stock rom and recovery,but my phone is now stuck on quietly brilliant logo and it bootloops on it.
meshua09 said:
Hi,
No need to worry, try this way:
(1) Download the PG76IMG.ZIP (Stock ROM) available from this thread. Extract the "system.img" file next.
(2) Make sure, your WFS can connect to your computer. If so, go to your phone's bootloader next, and choose "FASTBOOT". Then push the system.img image file to your phone as follows:
Voilá. Now shutdown your phone and turn it on again. You WFS2 should boot into the Stock ROM. Please let us know if this worked for you. Thank you
Kind regards, meshua
Click to expand...
Click to collapse
shouldn't he flash the boot also?
fastboot flash boot boot.img
Click to expand...
Click to collapse
and after that
fastboot flash system system.img
Click to expand...
Click to collapse
That worked for me.
If it still fails to startup
Reinstall cwm again:
download this: CWM_Recovery_5.0.2.6.zip
Flash the recovery.img(inside the just downloaded zip) using this command(ofc make sure to be in your phone's bootloader and that fastboot is selected):
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Now start up recovery and do:
- wipe data/factory reset
- wipe cache partition
- advanced --> - wipe dalvik cache
now go back to your bootloader and use fastboot to flash boot.img and system.img
fastboot flash boot boot.img
fastboot flash system system.img
Click to expand...
Click to collapse
There is no need to flash the stock recovery.img
Now your phone should boot normally.
Hi,
flashing the boot.img is what I consider as the next/last options. The boot.img contains the kernel and the initial file system which right now seems not being compatible with the stock HTC ROM you flashed the last time. Just follow nis-gens' advice and flash the corresponding boot.img too (as directed)...
Hungry to hear whether or not that put your phone back on track...
Cheers, meshua
After flashing boot.img it worked, thank you both!
meshua09 said:
Hi,
No need to worry, try this way:
(1) Download the PG76IMG.ZIP (Stock ROM) available from this thread. Extract the "system.img" file next.
(2) Make sure, your WFS can connect to your computer. If so, go to your phone's bootloader next, and choose "FASTBOOT". Then push the system.img image file to your phone as follows:
Voilá. Now shutdown your phone and turn it on again. You WFS2 should boot into the Stock ROM. Please let us know if this worked for you. Thank you
Kind regards, meshua
Click to expand...
Click to collapse
where do i type flashboot flash system system.img
??????
i am kind of confused.......
Hi kill3rlook5,
To use "fastboot", you need
the Android Debug Bridge (ADB) installed on your computer. It's part of the Android SDK which you can download here: developer.android.com/sdk/index.html. Choose your platform first, then download and install this kit.
a proper USB Driver that makes your phone talk with your computer by using adb or fastboot commands. If you can't find a driver which fits your phone, please search this forum, or use google to get a version that does.
Once both are installed, open a console on your computer (Windows: run >> cmd.exe), go to the folder that contains the fastboot.exe file, and run the command from within this console window. I hope that will distract you from your current confusion?
Cheers, meshua.
Would nis-gens method be putting it back entirely to stock, as it was before flashing any custom ROMs? I had Alquez's CM7 port, but decided to come back to the 2.3.5 stock build for some issues I need to clarify, and I'd like it back entirely at stock for testing purposes.
Really should have backed it up via CWM, but... I forgot. xD

[TUT] Re-flash stock ROM (RUU) after bricking a rooted device (for noobs)

Before you start, you will need to set up your computer to properly recognize the phone. You probably did this when rooting originally, but just in case... Install SDK tools for Android, Java runtime, and HTC Sync.
About HTC Sync: The only reason you need HTC Sync installed is for the USB drivers that come with it. But the program itself has been known to cause conflicts. Make sure that HTC Sync is not running in the background by opening Task Manager in Windows and killing it if you find it lurking in there.
Here we go:
1. Download the correct RUU (ROM Update Utility) for your device from androidfiles.org. Make sure you download a Primo_C RUU for a CDMA device (no sim card) or a Primo_U RUU for a GSM device (uses a sim card)!! Also make sure you get the correct RUU for your carrier.
2. Charge the battery above 50% or for at least one hour. If the battery dies during the flashing process, you could hard brick the phone!
3. Run the RUU until the wizard comes up. While the RUU wizard is open, find the temporary folder it created. (Open Explorer in Windows and type %temp% in the navigation bar.) There will be two folders with long encrypted names. In one of them you will find ROM.zip. Open it with 7zip and extract recovery.img or recovery_signed.img. Put it in the location were you've installed Android SDK tools. This is the stock HTC Recovery and it is needed to run the RUU.
4. Boot the phone into bootloader (power off, hold down volume and press power) and highlight FASTBOOT using the volume rocker and pressing power. Then connect the USB cable. You should see FASTBOOT USB.
5. Open a command prompt in Windows and navigate to the folder where you installed Android SDK tools. Flash the stock recovery extracted in step 3 above using the following command:
Code:
fastboot flash recovery recovery.img
or
Code:
fastboot flash recovery recovery_signed.img
6. Relock the bootloader using the following command:
Code:
fastboot oem lock
7. Re-run the RUU. It will restore the device to it's original condition, locked (though *** RELOCKED ***) and unrooted.
Once the install is done you'll have unlock the bootloader again using the token you already have from the first time, reflash CWM Recovery and re-root. All this will be 10x easier than the first time.
If you do re-root your phone, be 100% you backup the stock ROM in ClockworkMod Recovery before making changes!
Hi
Thanks for that perfect decsription exactly when I needed it
I just had a weired effect with my new windows 7 laptop that I want to share.
I installed the USB drivers and "fastboot devices" showed my HTC fine
but even flashing the stock recovery image was not working.
So it was stucking in the "Sending" part and never continued.
I then moved to my old laptop with Vista did exactly the same things
and there it worked without problems.
I disabled virus scanner, checked for htsync and used the original USB cable
without success.
But now I know why I normally never touch Windows and only
work on linux
Regards
max
---------- Post added at 11:19 PM ---------- Previous post was at 10:33 PM ----------
Hi
CafeKampuchia said:
If you do re-root your phone, be 100% you backup the stock ROM in ClockworkMod Recovery before making changes!
Click to expand...
Click to collapse
I have done that now - compared to my first "try"
Regards
max
hi. thanks for the tips.
however when i do this, i get an error "FAILED <remote: signature verify fail>
Any suggestions?
ur RUU and CID is diff...
ryanlow134 said:
ur RUU and CID is diff...
Click to expand...
Click to collapse
and... how do i make them the same?
lcavada said:
and... how do i make them the same?
Click to expand...
Click to collapse
Use the correct RUU package for your device
regards
max
Another way of saying it is that you downloaded the wrong RUU for your device.
not working
it keeps on saying waiting for device n does not proceed further
i tried installing the drivers again but that doesnt help either
pls help me out
I use fastboot flasher for this.. this tool is good .
sush93 said:
it keeps on saying waiting for device n does not proceed further
i tried installing the drivers again but that doesnt help either
pls help me out
Click to expand...
Click to collapse
"Waiting for Device" at fastboot usually related to bootloader driver. You need Android USB Driver
See : http://developer.android.com/sdk/win-usb.html
Hi folks,
I've bought my One V in late may and I had 2.08 ROM.
Now I've tested some roms and I wanted to revert back to stock rom.
I've downloaded RUU_PRIMO_U_ICS_40A_HTC_Europe_2.08.401.2_Radio_20.72.30.0833U_3831.17.00.18_M_release_263376_signed, and got recovery_signed and boot_signed images. Then I've went to fastboot, did flash recovery and boot partitions, and oem locked bootloader. Afterwards I booted my phone and entered PIN. Then I fired up RUU*.exe file, and I have 155 error. What the heck? Something I missed?
greetings!
run the ruu in hboot..
Sent from my HTC One V
thevilish said:
Hi folks,
I've bought my One V in late may and I had 2.08 ROM.
Now I've tested some roms and I wanted to revert back to stock rom.
I've downloaded RUU_PRIMO_U_ICS_40A_HTC_Europe_2.08.401.2_Radio_20.72.30.0833U_3831.17.00.18_M_release_263376_signed, and got recovery_signed and boot_signed images. Then I've went to fastboot, did flash recovery and boot partitions, and oem locked bootloader. Afterwards I booted my phone and entered PIN. Then I fired up RUU*.exe file, and I have 155 error. What the heck? Something I missed?
greetings!
Click to expand...
Click to collapse
Flashing RUU to revert to stock
- you must have the correct RUU for your device.
- if you are not sure, download CID Getter from Play Store and run it, it will show your CID.
- with your CID, you may be able to find a correct RUU for your device
then (even though some people may not agree with this, but this will bring no harm and it is noob-proof) do this:
1- flash a stock recovery.img
fastboot flash recovery recovery_signed.img
fastboot reboot-bootloader
fastboot erase cache
2- flash a stock boot.img
fastboot flash boot boot_signed.img
fastboot reboot-bootloader
fastboot erase cache
3- re-lock bootloader
fastboot oem lock
fastboot reboot-bootloader
fastboot erase cache
4- flash RUU
NOTE: There is no boot/reboot and enter pin in between.
paarthdesai said:
run the ruu in hboot..
Sent from my HTC One V
Click to expand...
Click to collapse
I've done this before and didn't succeeded, but now it works! Magic
Thanks a lot!
help
CafeKampuchia said:
Before you start, you will need to set up your computer to properly recognize the phone. You probably did this when rooting originally, but just in case... Install SDK tools for Android, Java runtime, and HTC Sync.
About HTC Sync: The only reason you need HTC Sync installed is for the USB drivers that come with it. But the program itself has been known to cause conflicts. Make sure that HTC Sync is not running in the background by opening Task Manager in Windows and killing it if you find it lurking in there.
Here we go:
1. Download the correct RUU for your device from Football's Primo Shipped ROM Collection.
2. Charge the battery above 50% or for at least one hour. If the battery dies during the flashing process, you could hard brick the phone!
3. Run the RUU until the wizard comes up. While the RUU wizard is open, find the temporary folder it created. (Open Explorer in Windows and type %temp% in the navigation bar.) There will be two folders with long encrypted names. In one of them you will find ROM.zip. Open it with 7zip and extract recovery.img or recovery_signed.img. Put it in the location were you've installed Android SDK tools. This is the stock HTC Recovery and it is needed to run the RUU.
4. Boot the phone into bootloader (power off, hold down volume and press power) and highlight FASTBOOT/B] using the volume rocker and pressing power. Then connect the USB cable. You should see FASTBOOT USB.
5. Open a command prompt in Windows and navigate to the folder where you installed Android SDK tools. Flash the stock recovery extracted in step 3 above using the following command:
Code:
fastboot flash recovery recovery.img
or
Code:
fastboot flash recovery recovery_signed.img
6. Relock the bootloader using the following command:
Code:
fastboot oem lock
7. Re-run the RUU. It will restore the device to it's original condition, locked (though *** RELOCKED ***) and unrooted.
Once the install is done you'll have unlock the bootloader again using the token you already have from the first time, reflash CWM Recovery and re-root. All this will be 10x easier than the first time.
If you do re-root your phone, be 100% you backup the stock ROM in ClockworkMod Recovery before making changes!
Click to expand...
Click to collapse
PLEASE HELP!
The 5th point does not work for me. I can not run the code.
What can i do?
what do you mean by navigate to the folder where you installed sdk?
brandoncoronado said:
what do you mean by navigate to the folder where you installed sdk?
Click to expand...
Click to collapse
It means that if you installed SDK in c:/android, then u must type.in the command prompt: cd c:/android and hit enter
Cheers
Sent from my HTC One V using xda app-developers app
brandoncoronado said:
what do you mean by navigate to the folder where you installed sdk?
Click to expand...
Click to collapse
where the fastboot.exe is located and stock recovery must be in the same folder for the command to work
[ask] Error 155
hey guys, ive been reading all tutorial for reverting to stock RUU.
the first time i tried, it works prefectly.
then after a few weeks, i tried to revert to stock RUU, it failed .
it show error 155.
i already flash the boot , recovery that i found inside the stock RUU, also I've relock the phone.
but when i relock the phone, it show "info Lock successfully , status read failed no such file / directory"
when i enter bootloader, it show that my device already "relocked"
does the relocked proses is successfully ?
iam running PrimoU 2.09.707.1 with stock bootloader, CWM recovery, and rooted ..
I did exactly as it is mentioned but at the end where there is vertical progress bar it gives me an error of customer Id... Failed to update. What shud i do. How do I check what my customer Id is I can't Download it from play store coz can't boot into normal screen... How do I make ruu and cid same.
Sent from my Galaxy Nexus using xda app-developers app

[Q] back to stock recovery from clockworkmod but dont know stock recovery version

Hey guys I'm kinda new to this stuff and I'm kind of a retard just bear with me plzzz . okay so i have rooted my HOX (international version) and flashed clockworkmod recovery but I'm not planning to flash a custom ROM or anything (just want the minor perks of rooting). Thing is I'm desperately waiting for jellybean 4.1 OTA but to carry out the OTA i believe I'll need the stock recovery (I've read u can OTA without relocking the bootloader and simultaneously protect root on your phone correct me if I'm wrong) but i have no idea which stock recovery i had or where i can get one from now ( i currently have clockworkmod) plzzz help me out. thanksss.
P.S my software number is 2.17.707.3 running htc sense 4.1 and android version 4.0.4
P.P.S i dont need a ruu or anything if im already on stock ROM right?
P.P.P.S the method for carrying out OTA given in this link still works right i mean htc hasnt worked a work around for this or anything right. http://forum.xda-developers.com/showthread.php?t=1670433
for receiving ota you have to be locked or at least stock, don't remember, to return to stock recovery you should follow this guide:
h**p://www.androidauthority.com/one-x-revert-stock-recovery-76854/
(tt instead of **)
glukosio said:
for receiving ota you have to be locked or at least stock, don't remember, to return to stock recovery you should follow this guide:
h**p://www.androidauthority.com/one-x-revert-stock-recovery-76854/
(tt instead of **)
Click to expand...
Click to collapse
yes ive read that tutorial b4 but im asking dont u need a stock recovery that is the same version that u had before u flashed clockworkmod. i dont know what version i had or how to find out the version in the first place also the link that i posted is a tutorial on how to update without locking the bootloader is that tutorial valid now or do i have to lock it???
Find the ruu for your current version
Run it. When window opens, DONT click anything.
Open an explorer window and on the address bar, type %tmp% which will take you to your temp directory.
Sort it by date and find in one of the two newly created directories a file named rom.zip. Copy it to your desktop. Close ruu window.
Now Open rom.zip. You will see recovery . img file inside. Extract it to your fastboot directory. Where your fastboot.exe files are.
From a command prompt in that directory, when your phone is on type
Adb reboot-bootloader
Wait until phone loads bootloader. There select fastboot using vol keys and power button to enter.
When phone is in fastboot, from your pc command window type
Fastboot flash recovery "name of recovery file".img
Fastboot erase cache
If you see success, you have your recovery.
Sent from my HTC One X using xda premium
eyosen said:
Find the ruu for your current version
Run it. When window opens, DONT click anything.
Open an explorer window and on the address bar, type %tmp% which will take you to your temp directory.
Sort it by date and find in one of the two newly created directories a file named rom.zip. Copy it to your desktop. Close ruu window.
Now Open rom.zip. You will see recovery . img file inside. Extract it to your fastboot directory. Where your fastboot.exe files are.
From a command prompt in that directory, when your phone is on type
Adb reboot-bootloader
Wait until phone loads bootloader. There select fastboot using vol keys and power button to enter.
When phone is in fastboot, from your pc command window type
Fastboot flash recovery "name of recovery file".img
Fastboot erase cache
If you see success, you have your recovery.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
See there's another problem I bought my phone in Pakistan and when I went to the list of ruu from a link in one of the forums here there were only ruu for India or Malaysia or hk in asia. No Pakistan. What will happen if I use the wrong ruu? And can u post another link for a list of recent ruu thanks so much
Sent from my HTC One X using xda app-developers app
Btw How do you know which ruu is the correct one for you apart from the region. I read somewhere about checking the cid. My phones cid is HTC_044
Sent from my HTC One X using xda app-developers app
See here first
http://pastebin.com/raw.php?i=YcnM8Sr9
Then section 2.2 here
http://forum.xda-developers.com/showthread.php?p=26541170#post26541170
Yours is HTC-Asia-SEA-WWE HTC__044
The best place to look for available ruus is football's sticky thread under android development section
Sent from my HTC One X using xda premium

[Q] HTC ONE X TEGRA 3 (worldwide) ROMS

hello guys,
i really need help with something:
i got an HTC One X Tegra 3 worldwide one:
CID HTC_044
ICS 4.0.4
*** UNLOCKED ***
S-On
H-Boot 0.94.0000
with clockworkmod 5.8.4.0
without root access.
i want flash a custom ROM, why questions are: (S720e)
1.do i have to unlock the bootloader (it is written ***unlocked*** so i think i don't have to unlock it because it already unlocked am i right?)
2.do i need a root access to flash new ROM?
3. do i have to updrage my H-BOOT to install new custom ROMs ? and how i do it?
4.how i get root access (the one click method didn't work for me..)
5.do i have to flash new recovery? (i dont think i need cause i have one already)
6. if i dont need make root, unlock the bootloader, flash new recovery i just move the zip to the phone and install it from the recovery?
i am noob, please help me,
THANKS FOR EVERY ONE WHO HELP!!
zivonex said:
hello guys,
i really need help with something:
i got an HTC One X Tegra 3 worldwide one:
CID HTC_044
ICS 4.0.4
*** UNLOCKED ***
S-On
H-Boot 0.94.0000
with clockworkmod 5.8.4.0
without root access.
i want flash a custom ROM, why questions are:
1.do i have to unlock the bootloader (it is written ***unlocked*** so i think i don't have to unlock it because it already unlocked am i right?)
2.do i need a root access to flash new ROM?
3. do i have to updrage my H-BOOT to install new custom ROMs ? and how i do it?
3.how i get root access (the one click method didn't work for me..)
5.do i have to flash new recovery? (i dont think i need cause i have one already)
6. if i dont need make root, unlock the bootloader, flash new recovery i just move the zip to the phone and install it from the recovery?
i am noob, please help me,
THANKS FOR EVERY ONE WHO HELP!!
Click to expand...
Click to collapse
You have a very old h-boot so you need to upgrade it first!!
So you need to flash the stock rom for your hboot or the ruu of your hboot and then when the hboot is 1.36 or 1.39 are the two best, you can flash a rom without problems!!
You dont have to unlock bootloader because is unlocked!
Sent from my HTC One X using xda app-developers app
1: no
2: no
3: yes (explain at the end)
4: flash a new custom rom (better then stock)
5: no
6: you install a new rom by
Flashing the boot.img with fastboot commands, make a FULL wipe in recovery and install a new rom.
The easiest way to get you upgraded is to get you to full stock and update via official HTC ota
Can you perform a fastboot command :
Fastboot getvar version-main
Please post the number
Mr Hofs said:
1: no
2: no
3: yes (explain at the end)
4: flash a new custom rom (better then stock)
5: no
6: you install a new rom by
Flashing the boot.img with fastboot commands, make a FULL wipe in recovery and install a new rom.
The easiest way to get you upgraded is to get you to full stock and update via official HTC ota
Can you perform a fastboot command :
Fastboot getvar version-main
Please post the number
Click to expand...
Click to collapse
what that command do? just give the number?
how i use it? how it works?
sorry that im a noob
Download ANDROID SDK BUNDLE (Google) unpack it and navigate to the platform tools. Point in that folder and hold down shift + click the right mouse button and select
Open command window here
Now put the phone in the bootloader and type in the command window on the pc
Fastboot getvar version-main
It will give the number we need for the right ruu !
Mr Hofs said:
1: no
2: no
3: yes (explain at the end)
4: flash a new custom rom (better then stock)
5: no
6: you install a new rom by
Flashing the boot.img with fastboot commands, make a FULL wipe in recovery and install a new rom.
The easiest way to get you upgraded is to get you to full stock and update via official HTC ota
Can you perform a fastboot command :
Fastboot getvar version-main
Please post the number
Click to expand...
Click to collapse
Mr Hofs said:
Download ANDROID SDK BUNDLE (Google) unpack it and navigate to the platform tools. Point in that folder and hold down shift + click the right mouse button and select
Open command window here
Now put the phone in the bootloader and type in the command window on the pc
Fastboot getvar version-main
It will give the number we need for the right ruu !
Click to expand...
Click to collapse
not working
C:\Android\android-sdk\sdk\platform-tools>Fastboot getvar version-main
< waiting for device >
_
its stucks like that....
i also tried with 'fastboot' i mean with low case 'f'
Uninstall HTC sync manager if you have it installed .....but leave the drivers on the pc
Mr Hofs said:
Uninstall HTC sync manager if you have it installed .....but leave the drivers on the pc
Click to expand...
Click to collapse
dont have HTC sync manager.
got the drivers.
Then it should work ! Do you have a MYHTC in the device manager of windows ?
yes i have it
Sent from my HTC One X using xda app-developers app
And you have the phone in the bootloader and you see "fastboot usb" in red text ?
Mr Hofs said:
And you have the phone in the bootloader and you see "fastboot usb" in red text ?
Click to expand...
Click to collapse
yup
Sent from my HTC One X
Hmm strange......sure you opened the command prompt inside the folder where also the fastboot and adb files are ?
Using the original HTC cable, usb 2.0 port on the pc ?
Mr Hofs said:
Hmm strange......sure you opened the command prompt inside the folder where also the fastboot and adb files are ?
Using the original HTC cable, usb 2.0 port on the pc ?
Click to expand...
Click to collapse
yes! i opened the CMD in the platfom-tools folder (the folder you told me with the adb abd fastboot files) i used original HTC cable (the one i got with my phone) and im 100%sure i used good usb port.
you think i need to try the other port?
EDIT:
version-main: 1.28.707.10
finished. total time: 0.007s
Sent from my HTC One X
I don't know what to think
Try a reboot of the pc and the phone ..... It should work. All the things seems to be in order. Maybe you have another pc around to test it on.
The joy of dodgy usb ports. I had this too last night
Htc One X Viper 3.4.2
Mr Hofs said:
I don't know what to think
Try a reboot of the pc and the phone ..... It should work. All the things seems to be in order. Maybe you have another pc around to test it on.
Click to expand...
Click to collapse
here i made:
version-main: 1.28.707.10
finished. total time: 0.007s
Iceax123 said:
The joy of dodgy usb ports. I had this too last night
Htc One X Viper 3.4.2
Click to expand...
Click to collapse
that is s*cks
Sent from my HTC One X
Oke here we go !
Download this file
http://bugsylawson.com/index.php/fi...11-radio-1120410514-release-260743-signedexe/
Backup everything from the phone you need, even a backup of the sdcard ! Because this will wipe all
1: charge the battery if its at low level
2: put the phone in the bootloader and relock the bootloader
Fastboot oem lock
3: keep the phone in the bootloader/fastboot usb mode
4: select the ruu with a right mouse button click and select
"Run as administrator"
5: sit back and follow the installer
This will bring back the phone to full stock, after this you go into the settings menu - about - software updstes.....you update as much as you can until it doesn't detect any updates anymore !!!
Mr Hofs said:
Oke here we go !
Download this file
http://bugsylawson.com/index.php/fi...11-radio-1120410514-release-260743-signedexe/
Backup everything from the phone you need, even a backup of the sdcard ! Because this will wipe all
1: charge the battery if its at low level
2: put the phone in the bootloader and relock the bootloader
Fastboot oem lock
3: keep the phone in the bootloader/fastboot usb mode
4: select the ruu with a right mouse button click and select
"Run as administrator"
5: sit back and follow the installer
This will bring back the phone to full stock, after this you go into the settings menu - about - software updstes.....you update as much as you can until it doesn't detect any updates anymore !!!
Click to expand...
Click to collapse
thanks alot!!
Just 3 more questions:
*how i relock the bootloader?
*is it safe?
*full stock means sense stock? or clean ics?
Sent from my HTC One X
1. fastboot oem lock
2. Yes, totally
3. Sense stock.

CM to Stock rom

Hello friends,
I want to go from CM ROM to ROM STOCK, but I want to keep my root and Philz Touch recovery.
I find it on the web: http://dl4.htc.com/RomCode/Source_and_Binaries/a5dug-3.4.0-g1e44625.zip
which corresponds to the version: 1.56.401.1
But I do not know if I install it via the recovery or another ....
I'm afraid of creating conflict (brick) with the root / customrecovery ...
Did you ever try?
thank you
Allanco2 said:
Hello friends,
I want to go from CM ROM to ROM STOCK, but I want to keep my root and Philz Touch recovery.
I find it on the web: http://dl4.htc.com/RomCode/Source_and_Binaries/a5dug-3.4.0-g1e44625.zip
which corresponds to the version: 1.56.401.1
But I do not know if I install it via the recovery or another ....
I'm afraid of creating conflict (brick) with the root / customrecovery ...
Did you ever try?
thank you
Click to expand...
Click to collapse
You have the US variant or if international what region is your device from?
Sent from my 710C using XDA Free mobile app
my device is EU , this rom is normaly EU
light us with
baseband
kernel
version
etc...
so we can help !
Allanco2 said:
my device is EU , this rom is normaly EU
Click to expand...
Click to collapse
If that's the RUU for your device the process is simple. All you need to do is rename it to 0P9CIMG.zip and put it on the root/main folder that pops up when you plug it in to your PC. Afterwards boot into recovery and it will automatically detect it. It will ask if you want to proceed choose no.
Before you do the restore you need to relock the bootloader in fastboot mode.
The command is:
fastboot oem lock
Reboot to fastboot and it will say relocked and detect the Stock RUU file. Select yes this time and allow it to proceed.
Do not stop this process even if it seems it froze as this can cause a brick.
You can also use this command after relocking and rebooting to fastboot. At this point on your PC put the RUU file in your ADB folder and run this command:
fastboot flash zip filename.zip
The above command I recommend because after you relock the bootloader CM might not want to boot up or it might try to automatically flash the RUU as soon as you enter the bootloader as I've seen this on some select devices. Try the command first as it works the same, just instead of flashing from your storage its through PC/USB. Kind of like ADB sideload. If you run into any issues you can unlock the bootloader with the same Unlock.bin file, flash a recovery in the bootloader and follow up with the SuperSU.zip through ADB sideload then finally a CM ROM flash through sideload as well.
Once your device boots you could put a Nandroid Backup and try that instead. Yes, you can move each individual file if you don't have a SD card from the internal storage to data/media/clockworkmod/backup. When you get to the last file you copy the folder with it to retain any properties it has and has the same foldername matching the backup files. You'll know what I mean because the storage is only 3.7 GB available and moving the nandroid completely it needs to copy it even using cut. I use ES file explorer for file management. Works great.
Sent from my 710C using XDA Free mobile app
After oem lock
a try to flash via fastboot = error of signature
a try via hboot = error /hboot is older
grrrrr
Edit : Have you got test this http://llabtoofer.com/htc-ruu-flashing-service/?
Allanco2 said:
After oem lock
a try to flash via fastboot = error of signature
a try via hboot = error /hboot is older
grrrrr
Edit : Have you got test this http://llabtoofer.com/htc-ruu-flashing-service/?
Click to expand...
Click to collapse
I have the same error. Is there any solution to this?.
Greetings.

Categories

Resources