Develop Bugs

[APP] Check Fus 2.0 - The firmware checker. Make you are up to date!

Hi,
I have made a little tool to check if there's any new firmwares on the FUS servers. No more need of starting Kies to check for new firmware!
* Automatically checks for new firmware update! (Pro only)
* Notifies the user with signal and vibration if a new firmware is released. (Pro only)
* Finds your "Product Code" and "HIDSWVER"
* Use custom or presets of "Product Code" and "HIDSWVER"
* Send the output by email
* No ads (Pro Only)
* Check multiple regions automatically (Pro Only).
* Check multiple regions on one click (Pro Only).
* If you want me to add any presets to the list, just PM me and I'll add them.
If you have any suggestion on what to improve, just let me know!
You can find me on IRC in #project-voodoo on freenode if you want to chat.
You can find it on the market:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Direct market link: Check Fus Pro
Direct market link: Check Fus
Supported models:
Should work on any Samsung Device running Android
How to find correct Product Code, PDA, CSC and Phone.
From you device.
dial *#1234# and you will get pda, phone and csc.
Product code
*2767*4387264636#
Or
Product Code is connected to you region and/or carrier.
The easiest way is to take a look in the list on this page to find out which one you should have.
Let me then know your setup and I'll add it to the presets!
If you have the FUS-link the file looks like this
GT-I9000_I9000XXJPO_I9000OXAJPO_I9000XXJPP_I9000XXJPO_XX_XEU.zip.enc
Taken from SamsungFUSnews twitter
Model: GT-I9000 | Code: XEU | Version: I9000XXJPO/I9000OXAJPO/I9000XXJPP | Date: 29.10.2010 16:23 | Size: 168,81 MB | ID: 2695763114
ProductCode: GT-I9000HKDXEU
PDA: I9000XXJPO
PHONE: I9000XXJPP
CSC: I9000OXAJPO
Webbased checkFus
http://fus.nanzen.se/
Instruction on how to decrypt
.. can be found here
If you find this application useful, please consider a small donation at fus.nanzen.se to show you appreciation.

Many thanks! Super usefull!

Very usefull app but could you make it that it could read ProductCode, Phone, PDA, CSC from the phone (with ROOT permissions of course)?

yani2000 said:
Very usefull app but could you make it that it could read ProductCode, Phone, PDA, CSC from the phone (with ROOT permissions of course)?
Click to expand...
Click to collapse
Yes, I'm working on getting it to work, but I cant get the app to open the specified file. I get permission error. Any advice on how to read system files would help a lot! I have got SuperUser to grant root access.

Thank You for this. I must not anymore cheking new firmware with Kies or with login on Samfirmware. I was checking some product code with your apk , and i got really interesting result, but right.
Once more thanks
Best regards

yani2000 said:
Very usefull app but could you make it that it could read ProductCode, Phone, PDA, CSC from the phone (with ROOT permissions of course)?
Click to expand...
Click to collapse
Consider it done

Doesn't work on my i9000M (JH2). Just a black screen and that's all.

Doesn't work on SGS international with firmware jm9. Only black screen
Sent from my GT-I9000 using XDA App

at last now i don't have to fire up crappy kies to check for updates everytime... thanks a lot for the app..
and good support also, i just sent him my product code to be added to the list, and today it's there !!! thanks again !

sadly also doesn't work on my Sgs with JM8 and Voodoo, just got black screen...
greez

Samarkande said:
sadly also doesn't work on my Sgs with JM8 and Voodoo, just got black screen...
greez
Click to expand...
Click to collapse
The same...JM2+VOODOO...

Sorry for the problems!
I'll have a look at the black screen issue asap!
Just a question, have you rooted your device?
Can someone provide me with a logcat when starting the app?

LuffarJoh said:
Sorry for the problems!
I'll have a look at the black screen issue asap!
Just a question, have you rooted you device?
Click to expand...
Click to collapse
Yes and in the beggining it was asking for rooting permissions as usually..i said yes and after this..black screen..

Maybe app not working with strong modified FW (voodoo, etc.), only with stock FW ? Logical, fus server dont know what is voodoo modification, unknown FW. It is only my personal mind....
Regards

tonysac said:
Yes and in the beggining it was asking for rooting permissions as usually..i said yes and after this..black screen..
Click to expand...
Click to collapse
can you send me logcat when you are opening the application?
It's working on my JPA+hardcore kernel and also in a 1.6 emulator (not the auto-discover of product code though, because of not rooted).

LuffarJoh said:
can you send me logcat when you are opening the application?
It's working on my JPA+hardcore kernel and also in a 1.6 emulator (not the auto-discover of product code though, because of not rooted).
Click to expand...
Click to collapse
Explain pls what should i do....im too nube for this

miro666 said:
Maybe app not working with strong modified FW (voodoo, etc.), only with stock FW ? Logical, fus server dont know what is voodoo modification, unknown FW. It is only my personal mind....
Regards
Click to expand...
Click to collapse
It shouldnt be any difference, voodoo only modifies the kernel, and the app should start anyway, like any other application, its made to work on Android 1.6. Did it work prior the auto-discover of ProductCode and HIDSWVER?
tonysac said:
Explain pls what should i do....im too nube for this
Click to expand...
Click to collapse
The easiest way is to install SendLog from market, start Check Fus, when it have started and only shows black screen, exit the application and start SendLog and send the log to [email protected]
Thanks alot for your help!

ignore this post... wrong post.

LuffarJoh said:
It shouldnt be any difference, voodoo only modifies the kernel, and the app should start anyway, like any other application, its made to work on Android 1.6. Did it work prior the auto-discover of ProductCode and HIDSWVER?
The easiest way is to install SendLog from market, start Check Fus, when it have started and only shows black screen, exit the application and start SendLog and send the log to [email protected]
Thanks alot for your help!
Click to expand...
Click to collapse
Just send...hope it helps..

tonysac said:
Just send...hope it helps..
Click to expand...
Click to collapse
Thank you.
Unfortunately I cant see any error msg. Pls try this version instead. I have disabled root.

new Euro firmaware P1000XXJK5 available

In case you are interested a new Euro firmware has appeared :
P1000XXJK5 ## P1.PIT Version 2.2 2010 November DOWNLOAD
it is in the usual place < not sure if we are able to post links to it yet....>
Alex

Please note this is NOT a full flash so do NOT select repartition when flashing otherwise it won't boot.

Anyone try this yet? Any benefits or features of note?

Is Kies picking any updates up yet?

So far, so good.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-P1000 using Tapatalk

Interesting. Here's a reminder of the build details for JK1 (dial *#*#44336#*#*):
PDA: P1000XXJK1
PHONE: P1000XXJK1
CSC: P1000OXAJK1
BUILD TIME: 01/11/2010 20:10:05 KST
Change List: 589527
Should I go through the pain of re-installing all my apps, settings and root-tweaks just for the sake of a build 9 days more recent than JK1 ?

Going from JJK1 to JJK5:
If you select only "PDA", no PIT file/repartition, no Modem, no CSC and this file the update will not delete your user applications/data/...
Only thing I needed to do after was to re-root it.
PS: But better be safe than sorry and make a backup anyway

FredBE said:
Going from JJK1 to JJK5:
If you select only "PDA", no PIT file/repartition, no Modem, no CSC and this file the update will not delete your user applications/data/...
Only thing I needed to do after was to re-root it.
PS: But better be safe than sorry and make a backup anyway
Click to expand...
Click to collapse
I did the same, but from JID, same outcome. Was rather happy (I had made a full backup myself)
So, hooray I guess Now to test this bad boy out.

hey there,i got one question will Asia firmware P1000DXJJ1 direct flash to the JK5?or i need to flash to P1000XWJJ4 euro firmware??Thanks

FredBE said:
Going from JJK1 to JJK5:
If you select only "PDA", no PIT file/repartition, no Modem, no CSC and this file the update will not delete your user applications/data/...
Only thing I needed to do after was to re-root it.
PS: But better be safe than sorry and make a backup anyway
Click to expand...
Click to collapse
Success !
Dial *#*#44336#*#*:
PDA: P1000XXJK5
PHONE: P1000XXJK5
CSC: P1000OXAJK5
BUILD TIME: 10/11/2010 14:22:22 KST
Change List: 688590
Had to re-root, used the z4-Mod app this time (last time I did it entirely manually, via the shell). Reboot...all fine (so far)
EDIT: the system apps remained with their latest updates, but my XDA-sourced Gallery3D apk (in /system/app/) was replaced with the JK5 flash...not a big deal, I'll just overwrite it again, if the sensor bug comes back ! UPDATE: yep, Gallery sensor bug still here...app replaced !
EDIT: AdFree had to be re-activated (no big deal, just something to think about after flashing).

Upgraded from JK1 to JK5 too, without issue.
Regards,
Dave

daniel.weck said:
Success !
Dial *#*#44336#*#*:
PDA: P1000XXJK5
PHONE: P1000XXJK5
CSC: P1000OXAJK5
BUILD TIME: 10/11/2010 14:22:22 KST
Change List: 688590
Had to re-root, used the z4-Mod app this time (last time I did it entirely manually, via the shell). Reboot...all fine (so far)
EDIT: the system apps remained with their latest updates, but my XDA-sourced Gallery3D apk (in /system/app/) was replaced with the JK5 flash...not a big deal, I'll just overwrite it again, if the sensor bug comes back ! UPDATE: yep, Gallery sensor bug still here...app replaced !
EDIT: AdFree had to be re-activated (no big deal, just something to think about after flashing).
Click to expand...
Click to collapse
Have you noticed any signicant differences between the two versions? Any noticeable improvements? Worth doing it? I always like having the latest but with this being setup just the way I want it, I don't wanna risk not being to do it again. Thanks
Sent from my GT-P1000 using Tapatalk

ayman07 said:
Have you noticed any signicant differences between the two versions? Any noticeable improvements?
Click to expand...
Click to collapse
I don't notice any difference at all.
ayman07 said:
Worth doing it?
I always like having the latest but
Click to expand...
Click to collapse
Grabbing ROMs from unknown sources, without any change-log whatsoever is a little risky...the only reason for doing it is intellectual curiosity, and the confidence to restore the system if anything fails.
ayman07 said:
with this being setup just the way I want it, I don't wanna risk not being to do it again. Thanks
Click to expand...
Click to collapse
I was quite worried about flashing the PDA component over my nicely-configured Android machine (which took me some time to get how I wanted it to be)...so I made a full Titanium backup just in case (apps+data), and I took notes of the few changes I made to the core system. As it turned out, the transition to JK5 was very smooth, everything that's visible on the surface remained the same...I guess the real changes are buried under the hood...god knows exactly what changed !

How is the browser???? Still lagging????

cezarc1 said:
How is the browser???? Still lagging????
Click to expand...
Click to collapse
I don't know, I use Dolphin HD, xScope, Opera Mobile, Firefox Mobile, MIUI, ... anything but the stock browser (and no, there's no lag)

cezarc1 said:
How is the browser???? Still lagging????
Click to expand...
Click to collapse
Browser is the same.
I can't believe this is not the first thing they will be fixing!

daniel.weck said:
I don't notice any difference at all.
Grabbing ROMs from unknown sources, without any change-log whatsoever is a little risky...the only reason for doing it is intellectual curiosity, and the confidence to restore the system if anything fails.
I was quite worried about flashing the PDA component over my nicely-configured Android machine (which took me some time to get how I wanted it to be)...so I made a full Titanium backup just in case (apps+data), and I took notes of the few changes I made to the core system. As it turned out, the transition to JK5 was very smooth, everything that's visible on the surface remained the same...I guess the real changes are buried under the hood...god knows exactly what changed !
Click to expand...
Click to collapse
i appreciate the thorough response. ill hold off for the next release.

hi all !
where is link for the firmware please ?
Thank's
Sorry fo my english
edit: resolved

FYI, I've started a new thread to discuss the issue of compiled ROM versus open-source code from Samsung:
http://forum.xda-developers.com/showthread.php?p=9300252#post9300252

Hi flashed this rom using GT-P1000-CSC-SERJJ2 and Moded_P1000XXJID but the language was russian i think even though english language is selected. Which phone and CSC do I use?thanks

[FREE APP] 1ClickInstall kernels 12/12/10

First of all: all these app are not official. I do it myself. If there is an issue, cry here.
Hi to all,
Here is my last apps, 3 one click installer for some improved kernel.
Why an installer?
Without these app you need Odin to install these very powerful kernels on your phone. Update.zip file is not possible if you have not change your recovery partition since Froyo has been released.
So it takes time for some users, for others it's too much complicated. I don't even speak about those under Linux or Mac (Heimdall power).
With these apps, the only thing you need is a compatible phone with the kernel you choose (look at the official website project for more information, adrdress are below). You need also to be root (if it's not the case, the installer open z4root in the android market).
I have to inform you that these app are not official.
What does it mean ?
Don't annoy the authors of these kernels with your issues about my apps. Come here, and cry if you need to.
I'm not responsible for what you do. If you use these apps, you are enouth smart to realize that it can break your phone. I'll try to help you, but I can't do miracle.
If it is the case, use Heimdall and send only the kernel file (zImage) of your original firmware to your phone. This file can be found in the tar file that you use to update your phone.
By using Heimdall you shouldn't lose your files. May be it's the same thing with Odin, but I'm under Linux, so I can't test.
Because I'm not the author of these kernel, if you like it, make a donation on the official website project page to the authors.
I don't ask anything, nor donation nor a price for the app, may be pray for my exams if you want
Enjoy these incredible kernels, and thanks to the authors.
Sorry to be so late in the update, after my exam, I just move to nyc for a new job... takes time and I totally forgot my little phone. I ll try to make next updates more rapidly. I ll also try to build a more interesting project... but I need time, and that s the thing I need the more...
It s very important to apply these updates to your phone !!!!
Voodoo LagFix
page : http://project-voodoo.org/
name of the app : Voodoo LagFix - 1clickinstall
version of the kernel : 5.01
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
YA OK
page : http://forum.xda-developers.com/showthread.php?t=823442
name of the app : YA OK one click installer
version of the kernel : 1.5
SpeedMod
page : http://forum.xda-developers.com/showthread.php?t=822756
name of the app : SpeedMod one click installer
version of the kernel :K10J

On the android market now. Don't hesitate to say me if it works or not...

Excellent idea for bringing these kernels to the masses, but you probably shouldn't put it on the market until some people here have tested it and confirms it doesn't kill their phone.
I'd love to test but I've already done it with Odin.
Also, is SpeedMode deliberately spelt like that, or a typo?

lpy said:
Excellent idea for bringing these kernels to the masses, but you probably shouldn't put it on the market until some people here have tested it and confirms it doesn't kill their phone.
I'd love to test but I've already done it with Odin.
Also, is SpeedMode deliberately spelt like that, or a typo?
Click to expand...
Click to collapse
Oh noooo typo!

My SGS won't boot anymore. I tried YA-Ok with this App but my phone won't boot. I also have no access to Recovery anymore. Download-Mode is working so I have to reflash with ODIN.
Please update your App

gore1985 said:
My SGS won't boot anymore. I tried YA-Ok with this App but my phone won't boot. I also have no access to Recovery anymore. Download-Mode is working so I have to reflash with ODIN.
Please update your App
Click to expand...
Click to collapse
I ve just tried, it works well on mine.
Can you give me more information about your phone ? Firm, model...
Mine is the international version.
Have you tried ya ok through odin before ?

snoopy33 said:
I ve just tried, it works well on mine.
Can you give me more information about your phone ? Firm, model...
Mine is the international version.
Have you tried ya ok through odin before ?
Click to expand...
Click to collapse
I've installed Docs ROM XXJPO V8 with SuperOptimized Kernel (4.3.4) with lagfix disabled. I've downloaded your App from the market, granted root and tab "Install". What do you mean with model ? I have GT-I9000. Don't know whether it is International or Europe
After reboot my phone gets stuck on the Galaxy S Bootsceen (the first one). Recovery also doesn't work anymore.

Nice effort!
Gonna test them now...
It's a pitty Ya-Ok is unstable on my sgs (crashes while running angry birds)

betoNL said:
Nice effort!
Gonna test them now...
It's a pitty Ya-Ok is unstable on my sgs (crashes while running angry birds)
Click to expand...
Click to collapse
Yeah, unstable for me too...
I ll try with Odin, but I don't think that this unstability is linked with the way the kernel is installed...

gore1985 said:
I've installed Docs ROM XXJPO V8 with SuperOptimized Kernel (4.3.4) with lagfix disabled. I've downloaded your App from the market, granted root and tab "Install". What do you mean with model ? I have GT-I9000. Don't know whether it is International or Europe
After reboot my phone gets stuck on the Galaxy S Bootsceen (the first one). Recovery also doesn't work anymore.
Click to expand...
Click to collapse
mmmm I've read on Curio twitter account that Docs Rom have some issues with /system partition. He has make a special kernel to repare domaged partition...
I can not say if it's linked with your bug.
Moreover, if the installation goes well for me the YA OK bug after on my phone (some little freeze afer 1 or 2 minutes). Can I ask you to try the other Kernel (speedmod). I know that you are able to restore your kernel. I can t test on another phone than mine, and the installation works well. I ve nothing to compare.

Can you make een option to backup and restore original kernel?

Tomorow! Now i m working my last test....

snoopy33 said:
Yeah, unstable for me too...
I ll try with Odin, but I don't think that this unstability is linked with the way the kernel is installed...
Click to expand...
Click to collapse
I meant YA-OK was unstable on my sgs before that. Nothing to do with your apks.
Just tested your apk. I installed Ya-OK , nice and easy, no problems
Then I installed speedmod(one click) back and once again, smoooth.
GOOG JOB !
It could be nicer (easy for me to say)if users could choose among the different Speedmod HZ values. Not to mention K10 is already in the area.
Which HZ value your one-click speedmod is using?
Cheers...
« »

you use redbend_ua to flash when phone is ON? this will cause corruptions if updateing a kernel wich is already lagfixed since it wont proper unmount when it reboots when its done.

trasig said:
you use redbend_ua to flash when phone is ON? this will cause corruptions if updateing a kernel wich is already lagfixed since it wont proper unmount when it reboots when its done.
Click to expand...
Click to collapse
i ve tested to install voodoo lagfix via redbend 4 times with lagfix enabled. It works well. But by security, i ve put a message to users to disable their lagfix before using the app. Do you have another way to install a kernel without computer ? I d be happy to try. I m trying other thingd on my side, but for the moment this way works, and i ve not better idea !

betoNL said:
I meant YA-OK was unstable on my sgs before that. Nothing to do with your apks.
Just tested your apk. I installed Ya-OK , nice and easy, no problems
Then I installed speedmod(one click) back and once again, smoooth.
GOOG JOB !
It could be nicer (easy for me to say)if users could choose among the different Speedmod HZ values. Not to mention K10 is already in the area.
Which HZ value your one-click speedmod is using?
Cheers...
« »
Click to expand...
Click to collapse
225
For rour idea, i ll make an update...

snoopy33 said:
i ve tested to install voodoo lagfix via redbend 4 times with lagfix enabled. It works well. But by security, i ve put a message to users to disable their lagfix before using the app. Do you have another way to install a kernel without computer ? I d be happy to try. I m trying other thingd on my side, but for the moment this way works, and i ve not better idea !
Click to expand...
Click to collapse
nah dont really know a better way.. maybe reboot into cwm and update.zip flash.. me atleast have used redbend so many times when phone is on so now when i try it i get corrupted after 2-3 flashes. and only thing that still works is proper shutdown of phone and then either recovery with redbend or download mode ;(

Anyone interested in a voodoo snapshot version ?

imparator said:
Can you make een option to backup and restore original kernel?
Click to expand...
Click to collapse
snoopy33 said:
Tomorow! Now i m working my last test....
Click to expand...
Click to collapse
There is a feature I am looking for...!

thisoneguy said:
There is a feature I am looking for...!
Click to expand...
Click to collapse
Added Voodoo Lagfix 5 RC release!

Root Defy+ bl7 2.3.6 Tested !! DFP-188, DFP-231, DF | Roms | Baseband fix[kdarknight]

{ I am completely responsible if you get your phone bricked... kidding ------ I am not responsible for any nuclear or biochemical wars, bricked phones, exploded battries,or any death caused by following this thread !!! DO this at your own Risk..:good: }
I know all this has been already posted,i am just collecting it all together.
All the credit goes to freeky and Awesome developers who made this possible.
Finally !! Defy plus 2.3.6 bl7 ,DFP-188, DFP-231, DFP-2311
For now we have no script to make it on the phone without wipe but I'm very happy that it's working.
Please read this :[GUIDE] Zephyrot All-in-One Defy Beginner's guide --> http://forum.xda-developers.com/show....php?t=1216982
Rooting Procedure
1. Wipe phone twice (2x make Wipe Data/Cache in stock recovery) [just to play safe] [to boot in stock recovery restart your phone while holding Power+Vol Down button]
2. Flash 4.5.1-134 DFP-231 CN or 4.5.1-134 DFP-231 Retail.en.EU CEE (It doesn't matter what version of this two You flash but it must be the same with version from point 4).
3. Wipe again (Data/Factory Reset)
4. Flash rooted SBF 4.5.1-134 DFP-231 CN Rooted SBF Part.1, 4.5.1-134 DFP-231 CN Rooted SBF Part.2 or
4.5.1-134 DFP-231 Retail.en.EU CEE Rooted SBF
----------------------------Source thread of flashing: http://forum.xda-developers.com/showthread.php?t=1542956---------------------------
Extract these zipped files and then flash with RSDlite,
---For RSD you first need to open your defy into bootloader, and for that while starting press Power+VOL UP.
---RUN RSDLite your device will be listed there, Browse for sbf and hit start.
---Flash Both the files and be the owner of rooted defy plus
Grab RSDlite from here :-- ~~~~~RSD Link 1~~~~~~
-- ~~~Link 2~~~
After Flashing,the first thing you should do is install 2nd init and get a custom recovery.
===>You just need to install a apk file and Bamm!! you got custom recovery.
===>To download 2nd init here is the link ~~~Link 1~~~, ~~~Link 2~~~
If you got problems with your baseband (like getting Signal frequency NIL or very Low) use BASEBAND SWITCHER
===> You have to flash a zip file through custom recovery like[CWM].
===> Link to baseband Switcher ~~~Link 1~~~, ~~~Link 2~~~
===> After Installing set baseband frequency according to your country.
Custom ROMs for Defy+ (MB526) ===> http://forum.xda-developers.com/showthread.php?t=1565338
SBF-files Defy and Defy+ STOCK ROMS, bootloader version-sbf-matrix ===> http://forum.xda-developers.com/showthread.php?t=966537
【20110529】【DEFY】MOTO RSD Lite 5.3.1 & Drivers 5.1.0(x86&x64) ===> http://forum.xda-developers.com/showthread.php?t=1100585
[Tool] basebandswitcher V4 multilanguage V0.7 (22.07.2011) ===> http://forum.xda-developers.com/showthread.php?t=1052745
[APP] 2ndInit Recovery Installer v2.3 [Updated: 24-April-2012] ===> http://forum.xda-developers.com/showthread.php?t=1032212
Tested or Defy+ with 4.5.1-134 DFP-231 Retail.en.EU CEE version.
Thanks List:
- People from http://bbs.mfunz.com for ShellRoot and Rooted SBF
- coelho_ from XDA for help and translation ShellRoot procedure
- Joe31 from XDA for CEE Rooted SBF
- Math43 from XDA for links to CN Rooted SBF
- free2livefrom XDA for testing and helping with patching under linux
-walter79,Zephyrot,wushantao,Sqoerk,pedrodh
-Chamelleon for working on root thread.
-Goose-T for providing Roms at one place.
- and everyone who tried to help in this thread - THANK YOU
Sorry for grammatical ,spelling or technical mistakes, please guide me through to correct it. I am just a newbie who is trying to help someone .
If any of the link found broken please Google the software you wanted to download or those professional people how already have this please create a mirror link and post it to this thread. I will also try to fix it as soon as possible

Is there a way to overclock stock rooted rom??

SlaveSrbija said:
Is there a way to overclock stock rooted rom??
Click to expand...
Click to collapse
I dont think so, because defy architecture only supports up to 1000Mhz which motorola has unlocked by launching defy+..

What is the diff between the flash in step 2 and step 4???
Hi Guys,
Nice post.:good: I also have a Defy plus with DFP-231 which is very hard to root with scripts(There is no scripts available to root for DP-231) and has to be flashed with a SBF file(Thank god atleast this it there to save the day).
My Question is : In the steps 2 and 4 we have to flash with some files. What is the difference between them two . Like what happens when you flash in step 2 and what happens when you flash in step 4 within the PHone.
Click to expand...
Click to collapse
I do not want to do something I clearly not understand.
And also I do not want those motorola installed applications to run in my phone by default. (Since I have 0 uses for tem). Motorola --- why do you make such crappy software when you can make really good hardware???????
Cheers,
Vic

vicky_ said:
Hi Guys,
Nice post.:good: I also have a Defy plus with DFP-231 which is very hard to root with scripts(There is no scripts available to root for DP-231) and has to be flashed with a SBF file(Thank god atleast this it there to save the day).
I do not want to do something I clearly not understand.
And also I do not want those motorola installed applications to run in my phone by default. (Since I have 0 uses for tem). Motorola --- why do you make such crappy software when you can make really good hardware???????
Cheers,
Vic
Click to expand...
Click to collapse
I am also just a newbie like you but in these sbf files:
1st sbf will replace your default installed ROM with this new one, so that your defy+ will able to support 2nd SBF(kernal).
2nd sbf is a rooted version of 1st sbf which will make your defy rooted.
You wont even able to find the difference between these sbfs and the sbf which is already in your cell. Only the Baseband will change which you can configure it according to your location by BASEBAND SWITCHER :laugh:
Let me know if i can help you more :victory:

Backup of the present ROM so that I can switch back to claim warranty.
kdarknight said:
I am also just a newbie like you but in these sbf files:
1st sbf will replace your default installed ROM with this new one, so that your defy+ will able to support 2nd SBF(kernal).
2nd sbf is a rooted version of 1st sbf which will make your defy rooted.
You wont even able to find the difference between these sbfs and the sbf which is already in your cell. Only the Baseband will change which you can configure it according to your location by BASEBAND SWITCHER :laugh:
Let me know if i can help you more :victory:
Click to expand...
Click to collapse
Hi kdarknight,
Thank you very much for explaining about the two SBF files. :good:
Question 1: -- Before I can start with the procedure to root my DFP-231 asia retail, I would like to know If there is any method to backup this ROM (Factory made) and then use it when I need to claim warranty.
Click to expand...
Click to collapse
:angel:
Question 2: -- Are these two SBF files (in steps 2 and 4 ) fixed SBF or full SBF. If I am to install full SBF then I would not be able to revert back to the factory setted SBF so a fixed SBF should give me an option to get back to the original ROM(So that I can claim warranty).
Click to expand...
Click to collapse
Kindly correct me if I'm wrong with my assumptions.
Thanks and Regards,
Vic

vicky_ said:
Hi kdarknight,
Thank you very much for explaining about the two SBF files. :good:
:angel:
Kindly correct me if I'm wrong with my assumptions.
Thanks and Regards,
Vic
Click to expand...
Click to collapse
Ans 1: Sorry, Without root you cannot take a backup of your current ROM.
Ans 2: You can revert back to original non-rooted defy anytime by just flashing the unrooted sbf again. You can do a search of stock sbfs of defy+ or try in the thread i have linked here :
SBF-files Defy and Defy+ STOCK ROMS, bootloader version-sbf-matrix ===> http://forum.xda-developers.com/showthread.php?t=966537

There are two threads in the dev section already covering everything. What is the need of another.?
Just making things redundant & confusing.
Moreover flashing anything won't modify bl7 kernel or make it compatible.
.
SlaveSrbija said:
Is there a way to overclock stock rooted rom??
Click to expand...
Click to collapse
Use SetVsel.

As mentioned, there are already pre-existing threads containing this information:http://forum.xda-developers.com/showthread.php?t=1542956
http://forum.xda-developers.com/showthread.php?t=1595013​
Please continue any further discussion in those threads.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[ROM/TUTORIAL] How to downgrade Samsung galaxy s7 to android 7

Code:
USE AT OWN RISK
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
* this was only tested on g930f and i don't guarantee that it will work on your model!
How to install
1. Download all 2 zips
You should have this 2 zips
- S7 Nogaut Deodexed/Debloated/Deknoxed.zip
- no-verify-opt-encrypt.zip
2. Format system,data,dalvik cache,cache
3. Flash ROM
4. After rom installation untick Reboot and click net
5. Flash no-verify-opt-encrypt (from twrp)
6. (optional) Flash Magisk (not included)
7. Reboot
WORKING:
Wi-fi
Fingerprint
Mobile data
Calling
Screenshots
SMS
Known Issues:
first boot is very slow you must wait 10-20 min
stock keyboard has many bugs (in samsung, google account setup you letter that you type will replace letter that you typed before, if you want type one capital letter you can't because samsung will type instead normal letter) you can just use other keyboard like microsoft swiftkey (in next update i will replace stock keyboard)
MTP not working (you cannot copy/cut files, on trying to copy/cut you get error "device is busy")
Features
- Deodexed
- Deknoxed
- Debloated
- Aroma installer
CHECK IF YOUR MODEL IS TESTED
SM-G930F - TESTED
SM-G930AZ - NOT TESTED
SM-G930FD - NOT TESTED
SM-G930K - NOT TESTED
SM-G930L - NOT TESTED
SM-G930P - NOT TESTED
SM-G930R4 - NOT TESTED
SM-G930R6 - NOT TESTED
SM-G930R7 - NOT TESTED
SM-G930S - NOT TESTED
Code:
Note: if you have not tested model and rom is working for you and has no bugs please let me know
Rom Info
android version: 7.0(nougat)
CSC: XEO
Build number: NRD90M.G930FXXS2DRAA
Kernel Source: https://github.com/djb77/samsung-kernel/tree/G93XX-TW7
Credits:
@Zordon.xyz - For creating rom and testing G930F Model
SCREENSHOTS
Spoiler: Screen Shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

@Zordon.xyz Please check your PM inbox. Thank you.

Badger50 said:
@Zordon.xyz Please check your PM inbox. Thank you.
Click to expand...
Click to collapse
i was searching for kernel source now i'm adding it. thx for giving info

Zordon.xyz said:
i was searching for kernel source now i'm adding it. thx for giving info
Click to expand...
Click to collapse
done

Zordon.xyz said:
done
Click to expand...
Click to collapse
Very good, and thank you.

First of all, I would like to say, very nice work! I have been looking for this possibility for a really long time.
My S7 has the latest binary version 8. When I look at the screenshots, I also see a version 8.
I have two questions about this:
Is it possible to keep my own CSC or is it only possible to use XEO?
Do I flash everything via TWRP or do I also need Odin?

delta0700 said:
First of all, I would like to say, very nice work! I have been looking for this possibility for a really long time.
My S7 has the latest binary version 8. When I look at the screenshots, I also see a version 8.
I have two questions about this:
Is it possible to keep my own CSC or is it only possible to use XEO?
Do I flash everything via TWRP or do I also need Odin?
Click to expand...
Click to collapse
thanks. idk maybe there is way to change csc, if you want i can make special build for your CSC. if you have twrp you don't need odin

Zordon.xyz said:
thanks. idk maybe there is way to change csc, if you want i can make special build for your CSC. if you have twrp you don't need odin
Click to expand...
Click to collapse
Thanks for your quick reply. That would be very nice of you, if you could make it suitable for me with the CSC DBT. You do not believe how much you do me a favor with this.

delta0700 said:
Thanks for your quick reply. That would be very nice of you, if you could make it suitable for me with the CSC DBT. You do not believe how much you do me a favor with this.
Click to expand...
Click to collapse
You have g930f?

Zordon.xyz said:
You have g930f?
Click to expand...
Click to collapse
Yes. For safety here is the phone info:

i builded rom with DBT csc but it's not booting :c

Zordon.xyz said:
i builded rom with DBT csc but it's not booting :c
Click to expand...
Click to collapse
Maybe it will work on my S7. I could give it a try. Otherwise, I would try your version and attempt to flash the CSC with Odin afterwards. Or do you think that's not a good idea?

delta0700 said:
Maybe it will work on my S7. I could give it a try. Otherwise, I would try your version and attempt to flash the CSC with Odin afterwards. Or do you think that's not a good idea?
Click to expand...
Click to collapse
hmm. i don't know but you can try...
anyways here is the link for download: https://androidfilehost.com/?fid=14655340768118480530
and thanks for likes on my posts

Zordon.xyz said:
hmm. i don't know but you can try...
anyways here is the link for download: https://androidfilehost.com/?fid=14655340768118480530
and thanks for likes on my posts
Click to expand...
Click to collapse
So I tried the DBT version. It sadly didn't boot like you said it would. Now I have flashed your version. Still it boots, I think with the Samsung logo I have to wait just 10-20 minutes as you mentioned. After that I'll see if it worked for me. But thanks never less!

Unfortunately, that doesn't seem to work either. It is still at the Samsung logo. Too bad. Nevertheless, thank you. I just don't understand Samsung, why they forbid you to make a downgrade....

try format data

I always format data as well, since I don't like to flash dirty.

delta0700 said:
I always format data as well, since I don't like to flash dirty.
Click to expand...
Click to collapse
i don't have any idea to how fix this

No problem. Thanks for your time aniway.

Couldn't downgrade. Followed instructions and did it twice. First time Samsung logo with S G930 appeared and the LED was off, then repeated the steps and only SAMSUNG + LED on, but no result, stuck at it