Develop Bugs

[APP] Check Fus 2.0 - The firmware checker. Make you are up to date!

Hi,
I have made a little tool to check if there's any new firmwares on the FUS servers. No more need of starting Kies to check for new firmware!
* Automatically checks for new firmware update! (Pro only)
* Notifies the user with signal and vibration if a new firmware is released. (Pro only)
* Finds your "Product Code" and "HIDSWVER"
* Use custom or presets of "Product Code" and "HIDSWVER"
* Send the output by email
* No ads (Pro Only)
* Check multiple regions automatically (Pro Only).
* Check multiple regions on one click (Pro Only).
* If you want me to add any presets to the list, just PM me and I'll add them.
If you have any suggestion on what to improve, just let me know!
You can find me on IRC in #project-voodoo on freenode if you want to chat.
You can find it on the market:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Direct market link: Check Fus Pro
Direct market link: Check Fus
Supported models:
Should work on any Samsung Device running Android
How to find correct Product Code, PDA, CSC and Phone.
From you device.
dial *#1234# and you will get pda, phone and csc.
Product code
*2767*4387264636#
Or
Product Code is connected to you region and/or carrier.
The easiest way is to take a look in the list on this page to find out which one you should have.
Let me then know your setup and I'll add it to the presets!
If you have the FUS-link the file looks like this
GT-I9000_I9000XXJPO_I9000OXAJPO_I9000XXJPP_I9000XXJPO_XX_XEU.zip.enc
Taken from SamsungFUSnews twitter
Model: GT-I9000 | Code: XEU | Version: I9000XXJPO/I9000OXAJPO/I9000XXJPP | Date: 29.10.2010 16:23 | Size: 168,81 MB | ID: 2695763114
ProductCode: GT-I9000HKDXEU
PDA: I9000XXJPO
PHONE: I9000XXJPP
CSC: I9000OXAJPO
Webbased checkFus
http://fus.nanzen.se/
Instruction on how to decrypt
.. can be found here
If you find this application useful, please consider a small donation at fus.nanzen.se to show you appreciation.

Many thanks! Super usefull!

Very usefull app but could you make it that it could read ProductCode, Phone, PDA, CSC from the phone (with ROOT permissions of course)?

yani2000 said:
Very usefull app but could you make it that it could read ProductCode, Phone, PDA, CSC from the phone (with ROOT permissions of course)?
Click to expand...
Click to collapse
Yes, I'm working on getting it to work, but I cant get the app to open the specified file. I get permission error. Any advice on how to read system files would help a lot! I have got SuperUser to grant root access.

Thank You for this. I must not anymore cheking new firmware with Kies or with login on Samfirmware. I was checking some product code with your apk , and i got really interesting result, but right.
Once more thanks
Best regards

yani2000 said:
Very usefull app but could you make it that it could read ProductCode, Phone, PDA, CSC from the phone (with ROOT permissions of course)?
Click to expand...
Click to collapse
Consider it done

Doesn't work on my i9000M (JH2). Just a black screen and that's all.

Doesn't work on SGS international with firmware jm9. Only black screen
Sent from my GT-I9000 using XDA App

at last now i don't have to fire up crappy kies to check for updates everytime... thanks a lot for the app..
and good support also, i just sent him my product code to be added to the list, and today it's there !!! thanks again !

sadly also doesn't work on my Sgs with JM8 and Voodoo, just got black screen...
greez

Samarkande said:
sadly also doesn't work on my Sgs with JM8 and Voodoo, just got black screen...
greez
Click to expand...
Click to collapse
The same...JM2+VOODOO...

Sorry for the problems!
I'll have a look at the black screen issue asap!
Just a question, have you rooted your device?
Can someone provide me with a logcat when starting the app?

LuffarJoh said:
Sorry for the problems!
I'll have a look at the black screen issue asap!
Just a question, have you rooted you device?
Click to expand...
Click to collapse
Yes and in the beggining it was asking for rooting permissions as usually..i said yes and after this..black screen..

Maybe app not working with strong modified FW (voodoo, etc.), only with stock FW ? Logical, fus server dont know what is voodoo modification, unknown FW. It is only my personal mind....
Regards

tonysac said:
Yes and in the beggining it was asking for rooting permissions as usually..i said yes and after this..black screen..
Click to expand...
Click to collapse
can you send me logcat when you are opening the application?
It's working on my JPA+hardcore kernel and also in a 1.6 emulator (not the auto-discover of product code though, because of not rooted).

LuffarJoh said:
can you send me logcat when you are opening the application?
It's working on my JPA+hardcore kernel and also in a 1.6 emulator (not the auto-discover of product code though, because of not rooted).
Click to expand...
Click to collapse
Explain pls what should i do....im too nube for this

miro666 said:
Maybe app not working with strong modified FW (voodoo, etc.), only with stock FW ? Logical, fus server dont know what is voodoo modification, unknown FW. It is only my personal mind....
Regards
Click to expand...
Click to collapse
It shouldnt be any difference, voodoo only modifies the kernel, and the app should start anyway, like any other application, its made to work on Android 1.6. Did it work prior the auto-discover of ProductCode and HIDSWVER?
tonysac said:
Explain pls what should i do....im too nube for this
Click to expand...
Click to collapse
The easiest way is to install SendLog from market, start Check Fus, when it have started and only shows black screen, exit the application and start SendLog and send the log to [email protected]
Thanks alot for your help!

ignore this post... wrong post.

LuffarJoh said:
It shouldnt be any difference, voodoo only modifies the kernel, and the app should start anyway, like any other application, its made to work on Android 1.6. Did it work prior the auto-discover of ProductCode and HIDSWVER?
The easiest way is to install SendLog from market, start Check Fus, when it have started and only shows black screen, exit the application and start SendLog and send the log to [email protected]
Thanks alot for your help!
Click to expand...
Click to collapse
Just send...hope it helps..

tonysac said:
Just send...hope it helps..
Click to expand...
Click to collapse
Thank you.
Unfortunately I cant see any error msg. Pls try this version instead. I have disabled root.

[ROM] I9000T I9000TDOJP2 Froyo Kies

Thanks restrepogoez
I want to inform that there is no need to change our I9000T I9000M the i9000 or as firmware was released today FroYo Model: GT-I9000T | Code: TNZ | Version: I9000TDOJP2/I9000TTNZJP2/I9000TDOJP1 that New Zealand is already tested and works perfect the 850Mhz band and it works perfectly, also has the Spanish language.
for download through KIES:
you must edit the registry or run the Registry Patcher Kies v.1.5.0.0
Model: I9000T
ProductCode:GT-I9000HKTTNZ (NEW ZELAND)
HIDSWVER: I9000TDOJJ1/I9000TTNZJI1/I9000TDOJI1/I9000TDOJJ1
actualiza a:
Model: I9000T
ProductCode:GT-I9000HKTTNZ (NEW ZELAND)
HIDSWVER:I9000TDOJP2/I9000TTNZJP2/I9000TDOJP1/I9000TDOJP2
Link for Odin
http://www.megaupload.com/?d=UZ6VBGBJ
PASS:restrepogoez
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Battery Mod
Version C for I9000TDOJP2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.mediafire.com/file/3uewvdmlb88e6c9/framework-res.apk

Galaxy S --- NEED HELP---
Hi there,
I need HELP, I was trying to lag fix my galaxy S and I have screwed it big time, it get stuck on Galaxy S screen.
I am in NZ with Telecom XT so have to download correct ROM and other respective files in order to work with my Galaxy.
I was wondering if u can help me find the correct files so I can factory reset my one.
Will look forward to your reply.
Regards,
Ali

Wow, dude. You think this might work with a I9000T from Mexico?

It should its the same model

ali_galaxy said:
Hi there,
I need HELP, I was trying to lag fix my galaxy S and I have screwed it big time, it get stuck on Galaxy S screen.
I am in NZ with Telecom XT so have to download correct ROM and other respective files in order to work with my Galaxy.
I was wondering if u can help me find the correct files so I can factory reset my one.
Will look forward to your reply.
Regards,
Ali
Click to expand...
Click to collapse
Try Sam Firmware site.
Doesn't look like they've got the exact firmware but you might be happy with something else under the "Asia" group of firmware.
You will need Odin to flash this. Instructions are on the website. And you will need to create a login (simple, nothing much requested to create a profile).

Could someone provide modem file for this firmware???

Ok will definitely try it. Too bad it's not JPO, tho. So after flashing this, is it ok to put in an optimized kernel and stuff?

I got the phone up and running altlast yay... but via recovery mode.. still very eager to upgrade... but with this NZ version if possible

Have you got any way of posting the rom? I have tried upgrading via the keis registry hack and it tells me that the original jj1 is not ready for upgrade.
Any help would be appreciated. I am on the Telecom network.
Cheers.

Be great if the modem from the TNZ could be extracted!

For ROM downloading, try this guy here:
http://www.modaco.com/content/i8000...41/samsung-mobile-firmware-queries-downloads/
I think he's ok. I once sent him 6 euros for a query and a download request and he returned them right back, because my specific ROM wasn't available.

Thanks for the link mate

I'm watching this one as well. After bricking my I9000T already trying to get to 2.2 I'm ikely to try this soon (when I get it back). Not game to do it on the wifes phone
Do we know if this is official TNZ branded firmware, or generic/unbranded?

@all, will this get the official froyo on my 850 next g telstra(australia) I9000T? and can you plzz tellme how to upgrade with kies hack? sorry im a noob, plzz help me out..id be greatful. cheers

Open up 'regedit' and go to the 'HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB' key. Then delete all the keys below it (i.e. 1, 2, 3, 4, 5, 6...).
Then open Kies and connect your phone so that it is detected by Kies.
Close Kies and run the EXE that you download for the Registry Patcher (http://forum.xda-developers.com/showthread.php?t=835628).
You should get a prompt to set the patch to 'True', select your sales code (not sure what Telstra is sorry), the current versions you want to report etc.
I haven't gone any further than that personally as I don't have 'my' phone back and the risk of problems from doing the wife's is just too frighting LOL.

sub7er said:
@all, will this get the official froyo on my 850 next g telstra(australia) I9000T? and can you plzz tellme how to upgrade with kies hack? sorry im a noob, plzz help me out..id be greatful. cheers
Click to expand...
Click to collapse
I'm with Telstra (GT-9000T) and I flashed this with Kies and the reg patcher. Works well, 850 band still there had to put the Telstra info back in for MMS and Internet.
This had a "telecom" splash on start up and two apps from the the same brand. Still much better then the 26 Telstra puts on.
Hope this helps.

KyBosch said:
I'm with Telstra (GT-9000T) and I flashed this with Kies and the reg patcher. Works well, 850 band still there had to put the Telstra info back in for MMS and Internet.
This had a "telecom" splash on start up and two apps from the the same brand. Still much better then the 26 Telstra puts on.
Hope this helps.
Click to expand...
Click to collapse
Guessing the two apps were 'Y!X TWorld' and 'Your Telecom'? That is pretty much the Telecom customised firmware then. While I hate customised firmware I'm pretty keen to get to 2.2 so perhaps the wife's phone will succumb afterall

Tordne1 said:
Guessing the two apps were 'Y!X TWorld' and 'Your Telecom'? That is pretty much the Telecom customised firmware then. While I hate customised firmware I'm pretty keen to get to 2.2 so perhaps the wife's phone will succumb afterall
Click to expand...
Click to collapse
Yup and the wallpapers are a bit different also navigon works with the 2.2

KyBosch said:
Yup and the wallpapers are a bit different also navigon works with the 2.2
Click to expand...
Click to collapse
And Flash Player .
I was really surprised when I got the phone home a few weeks ago that I couldn't immediately update to 2.2, seeing is it has been out for months and all. I guess that's one of the annoying things about each hardware manufacturing trying to put their personal touch on things. Might look at the Nexus S for this reason a bit later...

Tordne1 said:
Open up 'regedit' and go to the 'HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB' key. Then delete all the keys below it (i.e. 1, 2, 3, 4, 5, 6...).
Then open Kies and connect your phone so that it is detected by Kies.
Close Kies and run the EXE that you download for the Registry Patcher (http://forum.xda-developers.com/showthread.php?t=835628).
You should get a prompt to set the patch to 'True', select your sales code (not sure what Telstra is sorry), the current versions you want to report etc.
I haven't gone any further than that personally as I don't have 'my' phone back and the risk of problems from doing the wife's is just too frighting LOL.
Click to expand...
Click to collapse
Thanks for the instructions they were helpful and anybody in NEW ZEALAND on Galaxy can do this update its easy as and its for Telecom NZ...
Also here is a nice walk-through translated by google... its in spanish
http://translate.google.co.nz/trans...=/search?q=%5BROM%5D+I9000T+I9000TDOJP2&hl=en

[ROM][SPRINT][CDMA][12.03.2011] - etvROM - based on EF17, CM7, and others

Features/Info:
- Gingerbread
- Debloated and snappy
- Clockworkmod recovery
- Rooted
- Touchwiz
- Latest Superuser, Terminal Emulator
- Infrastructure mode WIFI tether (use Galaxy S or Epic 4G profile)
- Ad-hoc wifi connectivity
- Email, SMS, and other apps from Mainline CM7
- Everything works, designed to be a daily driver
- Other small improvements
Instructions:
- Direct download here: www.evanvaughan.com/filesvc.aspx?fileid=F91F7142F7FB4E4B (MD5 checksum: 17bd976c28226adebf17b0a2df00f29a)
- Flash with Heimdall (included in zip). If you're coming from an earlier version of etvROM you can flash only the factoryfs component. This will keep your apps and settings intact.
- If you did a full flash and not just factoryfs: When flash is complete, Tab will reboot into recovery. You need to wipe data/cache, and reboot. If you only flashed factoryfs, Tab will reboot and you'll be ready to roll.
DISCLAIMER: I did not write any code for this ROM. It's sourced from EB17, CM7 Mainline, and other places. All I did was put everything together into a Heimdall flashable package because there were no ROMS out there for the Tab that had what I wanted. I don't deserve any credit for this; it's mostly the work of other people.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

is there only English language in this rom?

nobz said:
is there only English language in this rom?
Click to expand...
Click to collapse
English and Spanish.

Got any screenshots?

surheeho said:
Got any screenshots?
Click to expand...
Click to collapse
I'll try to get some up tomorrow. I didn't really modify the appearance much (yet) so visually everything resembles a stock EF17 build except for the several AOSP style apps pulled in from CM7.
If anyone flashes this let me know, I tested it pretty thoroughly but am curious to see how it works for others.

uh oh...the Sprint ROMS are coming out the woodwork!!!!!!!!!!!! wh0o0o0o
Downloading and flashing. Currently im using the initial contact rom. Will compare and contrast momentarily =)
Thanks!
---------- Post added at 08:02 AM ---------- Previous post was at 07:07 AM ----------
not to be mean or anything, but i sort of had this problem with the initial contact rom.
I dont see any differences... I tried flashing twice. Wipe data/cache/ reboot.(actually 3x - just for good measure) it had a cool anti sprint boot logo...but other than that, it was the same ol same ol.
yes it is snappy and rooted, but i got the same effect after converting to EXT4.
you said that you have elements of different stuff (ie CM7). I didn't see anything CM7 in particular. Am i doing something wrong?
thanks again!

lazeballz said:
uh oh...the Sprint ROMS are coming out the woodwork!!!!!!!!!!!! wh0o0o0o
Downloading and flashing. Currently im using the initial contact rom. Will compare and contrast momentarily =)
Thanks!
---------- Post added at 08:02 AM ---------- Previous post was at 07:07 AM ----------
not to be mean or anything, but i sort of had this problem with the initial contact rom.
I dont see any differences... I tried flashing twice. Wipe data/cache/ reboot.(actually 3x - just for good measure) it had a cool anti sprint boot logo...but other than that, it was the same ol same ol.
yes it is snappy and rooted, but i got the same effect after converting to EXT4.
you said that you have elements of different stuff (ie CM7). I didn't see anything CM7 in particular. Am i doing something wrong?
thanks again!
Click to expand...
Click to collapse
If you have a different boot animation it probably flashed fine. Also the build number in About should be EVAN.GB.V6. And if you open Email or MMS it should be an AOSP-style app (taken from CM7) rather than the clunky apps included from the vendor. Also, you should be able to boot into Clockworkmod recovery and the wallpaper should have been different. If you have all this stuff I would say the flash went fine. Like I said, I didn't do any work as far as theming goes. My goal with this package was to get something out there that's flashable, functional, and lightweight. This is just a start that I can build on as I learn more.

Sweet deal, grats on your steps to becoming a full fledged dev!

New version uploaded along with some screenshots.

etvaugha said:
New version uploaded along with some screenshots.
Click to expand...
Click to collapse
Can you add Russian lang to your Rom? It will be good for Russian users

Is this missing a boot.bin file? I'm kind of unfamiliar with heimdall.

Can you add chinese lang to your Rom? It will be good for chinese users
Thx

Hey dude, possible to re-up this into a CWM-flashable file?
Heimdall is not my friend apparently.

severedembrace said:
Is this missing a boot.bin file? I'm kind of unfamiliar with heimdall.
Click to expand...
Click to collapse
Boot.bin doesn't need to be flashed. Just plug in the included 6 files and leave the remaining fields blank. Did you install the driver with the Heimdall driver utility?
The next release I will make a TAR or CWM-flashable package. I tried to make a TAR for this release but Odin didn't like it. I must have done something wrong.

etvaugha said:
Boot.bin doesn't need to be flashed. Just plug in the included 6 files and leave the remaining fields blank. Did you install the driver with the Heimdall driver utility?
The next release I will make a TAR or CWM-flashable package. I tried to make a TAR for this release but Odin didn't like it. I must have done something wrong.
Click to expand...
Click to collapse
Ah ok. For some reason it wouldn't initiate until I plugged something in to the boot field.
I soft bricked because of my inexperience. Got the death screen.
Odin saved the day though.

CM13.0 for LEX720 -Team Superluminal-

I want to inform people that there is another CM-13.0 available in Team Superluminal web site.
Thanks and enjoy!

Do I have to create a login to download?

Tikerz said:
Do I have to create a login to download?
Click to expand...
Click to collapse
It's worth it trust me.

ekkilm said:
It's worth it trust me.
Click to expand...
Click to collapse
Thanks. I'm about to flash it.
Update: Not flashing for me. I'm stuck at "Patching system...."

Has anyone done a dirty flash over the other CM build successfully? I'm about to give it a try.
Edit: Just flashed over the old build with no issues. Thanks!! I'll provide a screenshot once it finishes preparing the apps.

NOTE: Remember install gapps in same time with the rom (if you need/like)
NOTE2: Remember factory reset and format system partition when coming from any other ROM than previous version of TS CM13.0

tim08 said:
Has anyone done a dirty flash over the other CM build successfully? I'm about to give it a try.
Edit: Just flashed over the old build with no issues. Thanks!! I'll provide a screenshot once it finishes preparing the apps.
Click to expand...
Click to collapse
Are you using x720 or x727?
Sent from my LEX727 using Tapatalk

Had an issue with the PIN being overwritten I believe... just followed this guide and all is well again.
Edit: I'm using LEX727, about to edit build.prop again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

tim08 said:
Had an issue with the PIN being overwritten I believe... just followed this guide and all is well again.
Edit: I'm using LEX727, about to edit build.prop again
Click to expand...
Click to collapse
Weird, it's not flashing for me. I'm stuck on patching system. I'm coming from stock.
I also noticed the ZIP contains firmware images. Not knowing where they're from, I'm a little worried if something goes wrong or is in compatible I can't get the x727 firmware files back.

tim08 said:
Had an issue with the PIN being overwritten I believe... just followed this guide and all is well again.
Edit: I'm using LEX727, about to edit build.prop again
Click to expand...
Click to collapse
I have seen conflicting info on this can you give me the exact edits u did to the build prop if it works please. Since you are on the 727 don't you need to flash the band 12 also?

Please read description and instructions before any steps.
It's for LEX720 and we've added LEX720 FW files in the rom also.

How to install:
NOTE: You have to have custom recovery installed, before any steps.
0) If you want to be safe: Backup apps/sms/etc with some app (e..g Titanium)
1) boot into marshmallow compatible TWRP (or similar) recovery
2) Backup -> swipe to backup
When coming from ANY other ROM than TS CM13:
2.1) Wipe -> Advanced Wipe -> Select system, data, cache and dalvik cache partition (Swipe to wipe)
3) install cm-13.0-xxxxxxx-UNOFFICIAL-le_zl1.zip (select from storage or via adb sideload) and must install gapps same time with the rom if you make clean install (if you need/like)
4) reboot
5) profit
NOTE: All changes in system partition are lost when you update ROM.
Click to expand...
Click to collapse
Followed the directions here and everything going ok for now. Restoring my apps via titanium backup.

I don't think any modem is flashed at least I haven't had any issues needing to flash the modem for band 12.
I edited "ro.product.model=LEX720" to "ro.product.model=x727" and "persist.radio.multisim.config=dsds" to "persist.radio.multisim.config=NA" but it doesn't seem to want to find the SIM card now...
Nevermind, I guess it's not intended for the X727 US version so I'll be flashing back to the old CM

the differences between cm-13.0-xxxxxxx-UNOFFICIAL-le_zl1.zip and CM13.0 for LEX720 -Team Superluminal? witch version is better?

tim08 said:
I don't think any modem is flashed at least I haven't had any issues needing to flash the modem for band 12.
I edited "ro.product.model=LEX720" to "ro.product.model=x727" and "persist.radio.multisim.config=dsds" to "persist.radio.multisim.config=NA" but it doesn't seem to want to find the SIM card now...
Nevermind, I guess it's not intended for the X727 US version so I'll be flashing back to the old CM
Click to expand...
Click to collapse
Arent they the same except for build prop and band 12? I can't make heads or tails. I thought otherwise tehy are the same.

zmanfarlee said:
Arent they the same except for build prop and band 12? I can't make heads or tails. I thought otherwise tehy are the same.
Click to expand...
Click to collapse
I thought so too but when I edited build.prop for one sim it failed to find the card and said one wasn't inserted. So I'm just gonna flash the old CM build which I know works with one sim, I could keep it on the setting for two but then it takes forever to lock on and seems to lose service.

tim08 said:
I thought so too but when I edited build.prop for one sim it failed to find the card and said one wasn't inserted. So I'm just gonna flash the old CM build which I know works with one sim, I could keep it on the setting for two but then it takes forever to lock on and seems to lose service.
Click to expand...
Click to collapse
I think the x720 firmware files has something to do with it. Hopefully when you restore the firmware files are still there from x727.
EDIT: Just thought of something, maybe flash the US modem along with doing the build.prop edit will work for this ROM on x727?

tim08 said:
I thought so too but when I edited build.prop for one sim it failed to find the card and said one wasn't inserted. So I'm just gonna flash the old CM build which I know works with one sim, I could keep it on the setting for two but then it takes forever to lock on and seems to lose service.
Click to expand...
Click to collapse
Weird when I boot it flashes a signal then sim then signal within 2 seconds and I am locked in. Weird. I did not expect this x720 vs x727 to be such a huge issue.

I installed it and will try it on lex720 for some days. The chinese one has a realy bad battery. Hope this will be better

I have it running on a US 727, it works fine, doesn't have any of the chinese junk off the other app. I don't know how to check band 12, and I'm not sure it matters in my area. Also the themer works.

[ROM/TUTORIAL] How to downgrade Samsung galaxy s7 to android 7

Code:
USE AT OWN RISK
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
* this was only tested on g930f and i don't guarantee that it will work on your model!
How to install
1. Download all 2 zips
You should have this 2 zips
- S7 Nogaut Deodexed/Debloated/Deknoxed.zip
- no-verify-opt-encrypt.zip
2. Format system,data,dalvik cache,cache
3. Flash ROM
4. After rom installation untick Reboot and click net
5. Flash no-verify-opt-encrypt (from twrp)
6. (optional) Flash Magisk (not included)
7. Reboot
WORKING:
Wi-fi
Fingerprint
Mobile data
Calling
Screenshots
SMS
Known Issues:
first boot is very slow you must wait 10-20 min
stock keyboard has many bugs (in samsung, google account setup you letter that you type will replace letter that you typed before, if you want type one capital letter you can't because samsung will type instead normal letter) you can just use other keyboard like microsoft swiftkey (in next update i will replace stock keyboard)
MTP not working (you cannot copy/cut files, on trying to copy/cut you get error "device is busy")
Features
- Deodexed
- Deknoxed
- Debloated
- Aroma installer
CHECK IF YOUR MODEL IS TESTED
SM-G930F - TESTED
SM-G930AZ - NOT TESTED
SM-G930FD - NOT TESTED
SM-G930K - NOT TESTED
SM-G930L - NOT TESTED
SM-G930P - NOT TESTED
SM-G930R4 - NOT TESTED
SM-G930R6 - NOT TESTED
SM-G930R7 - NOT TESTED
SM-G930S - NOT TESTED
Code:
Note: if you have not tested model and rom is working for you and has no bugs please let me know
Rom Info
android version: 7.0(nougat)
CSC: XEO
Build number: NRD90M.G930FXXS2DRAA
Kernel Source: https://github.com/djb77/samsung-kernel/tree/G93XX-TW7
Credits:
@Zordon.xyz - For creating rom and testing G930F Model
SCREENSHOTS
Spoiler: Screen Shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

@Zordon.xyz Please check your PM inbox. Thank you.

Badger50 said:
@Zordon.xyz Please check your PM inbox. Thank you.
Click to expand...
Click to collapse
i was searching for kernel source now i'm adding it. thx for giving info

Zordon.xyz said:
i was searching for kernel source now i'm adding it. thx for giving info
Click to expand...
Click to collapse
done

Zordon.xyz said:
done
Click to expand...
Click to collapse
Very good, and thank you.

First of all, I would like to say, very nice work! I have been looking for this possibility for a really long time.
My S7 has the latest binary version 8. When I look at the screenshots, I also see a version 8.
I have two questions about this:
Is it possible to keep my own CSC or is it only possible to use XEO?
Do I flash everything via TWRP or do I also need Odin?

delta0700 said:
First of all, I would like to say, very nice work! I have been looking for this possibility for a really long time.
My S7 has the latest binary version 8. When I look at the screenshots, I also see a version 8.
I have two questions about this:
Is it possible to keep my own CSC or is it only possible to use XEO?
Do I flash everything via TWRP or do I also need Odin?
Click to expand...
Click to collapse
thanks. idk maybe there is way to change csc, if you want i can make special build for your CSC. if you have twrp you don't need odin

Zordon.xyz said:
thanks. idk maybe there is way to change csc, if you want i can make special build for your CSC. if you have twrp you don't need odin
Click to expand...
Click to collapse
Thanks for your quick reply. That would be very nice of you, if you could make it suitable for me with the CSC DBT. You do not believe how much you do me a favor with this.

delta0700 said:
Thanks for your quick reply. That would be very nice of you, if you could make it suitable for me with the CSC DBT. You do not believe how much you do me a favor with this.
Click to expand...
Click to collapse
You have g930f?

Zordon.xyz said:
You have g930f?
Click to expand...
Click to collapse
Yes. For safety here is the phone info:

i builded rom with DBT csc but it's not booting :c

Zordon.xyz said:
i builded rom with DBT csc but it's not booting :c
Click to expand...
Click to collapse
Maybe it will work on my S7. I could give it a try. Otherwise, I would try your version and attempt to flash the CSC with Odin afterwards. Or do you think that's not a good idea?

delta0700 said:
Maybe it will work on my S7. I could give it a try. Otherwise, I would try your version and attempt to flash the CSC with Odin afterwards. Or do you think that's not a good idea?
Click to expand...
Click to collapse
hmm. i don't know but you can try...
anyways here is the link for download: https://androidfilehost.com/?fid=14655340768118480530
and thanks for likes on my posts

Zordon.xyz said:
hmm. i don't know but you can try...
anyways here is the link for download: https://androidfilehost.com/?fid=14655340768118480530
and thanks for likes on my posts
Click to expand...
Click to collapse
So I tried the DBT version. It sadly didn't boot like you said it would. Now I have flashed your version. Still it boots, I think with the Samsung logo I have to wait just 10-20 minutes as you mentioned. After that I'll see if it worked for me. But thanks never less!

Unfortunately, that doesn't seem to work either. It is still at the Samsung logo. Too bad. Nevertheless, thank you. I just don't understand Samsung, why they forbid you to make a downgrade....

try format data

I always format data as well, since I don't like to flash dirty.

delta0700 said:
I always format data as well, since I don't like to flash dirty.
Click to expand...
Click to collapse
i don't have any idea to how fix this

No problem. Thanks for your time aniway.

Couldn't downgrade. Followed instructions and did it twice. First time Samsung logo with S G930 appeared and the LED was off, then repeated the steps and only SAMSUNG + LED on, but no result, stuck at it