Just unlocked my old Excalibur and about to start playing - HTC Excalibur

Last October I finally upgraded from my old Excalibur to my new HTC Desire but recently found a need to have a secondary phone on hand with a different network provider.
I have the BT version of the Excalibur (the ToGo) and got it unlocked for free very easily and painlessly from BT (0800 6781030 from landline or 01324 456789 from mobile).
I know the device is quite old now but I've only really found out about all the custom stuff for it and just wanted to make sure what I am doing.
Plan is to put the WM 6.5 3VO ROM onto it but having explored the forums, FAQs and stickies there are a number of things I'm still confused about.
First thing is what exactly is the CID unlock (and why is the USPL better?) and is the USPL necessary to properly flash the new ROM (as it isn't mention in the 3VO installation instructions).
EDIT: I found a USPL folder inside the 3VO rar. Does the auto.bat file do it for you?
EDIT 2: Answered my own question - the batch file does have the instructions to first install the USPL before running the RUU...
Next is the installation of the T9 keyboard after the flash. This thread (does not explicitly mention 3VO but is about other 6.5 ROMs) mentions the need to update the keyboard. Is this necessary and if so does it need to be the US one or should I use the UK one listed in the stickied thread?
Lastly I understand that the 4th ROM on this list is the official ROM for my phone if it all goes wrong. The unbricking tutorial mentions that I would need to run the RomUpdateUtility.exe but the file comes simply as an .exe with the name HTC_S620_WWE_BT_3.66.424.1_4.1.13.44_02.94.90_Ship.exe. I assume that it is the same?
EDIT: Whoops. Might help if I actually opened the archive to find the RomUpdateUtility.exe sitting inside...
Other than that I hope to enjoy what this new ROM can bring over the horribly slow and nasty one that shipped on the device (when I didn't even know this place existed).
Any help much appreciated

Welcome ,
There is a sticky to follow up and also the thread already opened for any discussion. Please post in one of them.
Enjoy your stay and happy flashing .

Related

Restoring to Origonal t-Mobile Vario II Rom

Hi,
I used to use an O2 EXEC and was happy playing around with ROMS as I could always download the origonal from o2
I cant find a simular download from T-Mobile so am uncomfortable trying the new HTC WM6 Rom as my phone is new!! and I cant go back (in case of warranty claim etc)
I've seen various threads on backing up Roms but they state you cant restore using these backups
So is there a download (like the o2 one?)
Or can someone post step by step instructions of how to do it manually (if possible)
Many thanks
Jonathan
Check the wiki. many original shipped roms are there.
Something like wiki > hermes > original shipped ROM.
If you use the google search tool linked in my sig and search for something like:
hermes rom original
you will probably find it too. Also, mrvanx.org has a good guide for this.
Checked there alreay there is only a Hungarian English Rom (so still not able to reset to default!)
Guide on Modaco
There's a guide on Modaco that I successfully followed. After my first flash to WM6 I had to downgrade to WM5 to restore a SPB Backup (forgot to activesync first, and spb backup wouldn't restore on WM6 from WM5).
http://www.modaco.com/Paul-s-guide-to-backin-t255090.html
Also, you may want the t-mob splash screens as these are not extracted, I've attached them for your pleasure (use the guide on mrvanx's site to convert and flash them, paying VERY close attention to the instructions, do it wrong and you'll have to reflash).
Also, it goes without saying, make sure you have installed HardSPL
The guides on MrVanx's site are good for newbs (it's what I used first time around)
Thanks Philjohn,
Thats EXACTLY what I was after!!
I've already got a backup of the OS and ExtROM for T-Mobile - and I'm sure IPL SPL are available.
The only thing is if you upgrade the radio rom past 1.28 (I think...) you can't go back as there is currently no way to downgrade the radio bootloader...i doubt anyone in the warranty\whatever dept. would notice that though...
If you get stuck, PM me
Smiffy.

Links are broken? Help?

So I already upgraded to WM6 on my 8525 a while ago (I don't remember at all how I did it or which firmware I used). I want to use the 5.0.2 diamond.. is there anything special I need to do to downgrade first? I'm a little lost... and the links for the first sticky are a no go... anyone have any easy info so I don't have to get forever lost wading through endless posts :|
Download the ZIP file, extract it, and run the EXE in the extracted location. Why do you think you need to downgrade first?
Too used to hacking my psp I guess lol
So I have a Ruu_signed.nbh and a RUUWrapper.exe which gives me an application error when attempting to run in xp. Do I need to throw these on an SD card (I don't have one), the files are too big to fit directly on the device.
I feel as if I'm missing something blatantly simple
You probably don't have the .NET Framework installed. I believe version 2.0 is required.
Ahh, thank you.
I think one last questions, I hit auto detect for my version of SPL. it says "this is 1.11 retail, you are recommended to use SSPL, would you like to?" I hit yes, then I hit next, then it says "please be aware that this flasher is intended solely for SPL 1.11 and you must have 1.11 Hard SPL installed in order to flash any unsigned files"
was there a pop-up I missed for the install of the 1.11 SPL? Or am I having difficulty reading this correctly
Ooh, I guess you don't have HardSPL installed. It's highly recommended that you flash it before flashing anything else. See http://forum.xda-developers.com/showthread.php?t=296722 for more info on that and, after flashing HardSPL, you should be OK flashing OS ROMs.
Ahhh... well thank you much, I have everything up and running now *relaxes*. I appreciate the speedy responses
No prob And I would ask that you comment in the MaRaHoX Diamond thread regarding how well the ROM works for you, after using it for a bit.
will do, especially after I find and install a cab for windows live on it (need messenger)

ROMs for the Diamond from HTC

Hi,
Does HTC release their own updated ROMs for the Diamond???
If so where can I find them and how do I update the device (does HTC have instructions on the web)??? Also what is the latest ROM version (I think I have 1.37.0 WWE), my phone came from Hong Kong...
Thanks,
NW
NightWolf88 said:
Hi,
Does HTC release their own updated ROMs for the Diamond???
If so where can I find them and how do I update the device (does HTC have instructions on the web)??? Also what is the latest ROM version (I think I have 1.37.0 WWE), my phone came from Hong Kong...
Thanks,
NW
Click to expand...
Click to collapse
Try reading the rules here before posting!
Also, get familiar to using forum search and also google search.
oh no...
not someone who and use the search button
i have tried the search function!
i cannot find a concrete answer as to if htc has actually got a download page with the roms or if we need to use the rom 1.93... and this hard spl program...
fyi when searching i found many ppl asking the same qus as me yet there was no answer other than a few wasteful people saynting use the search function... if u do know the answer dont be Arrogant and say use search - the onlynthing u are doing is wasting ppls time and increasing ur post count. i asked for some help if u dont have anything useful to add dont post...
thanks
www.htc.com - E-club
It's in your phone manual as well.
Riel said:
www.htc.com - E-club
It's in your phone manual as well.
Click to expand...
Click to collapse
HTC e-club doesn't have roms for diamond - not on Hong Kong where I login anyway.
Thanks for the reply Riel/Tim, I have been to that page and enter in my SN and register but when I go to my device nothing comes up... I cannot see the Diamond listed under software downloads either..? I log into world wide...
Thanks for the reply, I have been to that page and enter in my SN and register but when I go to my device nothing comes up as well... SO I'd say HTC havent release any ROM device updates... SO how do you guys get the exe for the diamond v1.93???
Also to install the 1.93 ROM posted by Tom do I need to install HardSPL on my phone..? Because it looks like that package will work with no need to install any SPL, its just an exe that runs through a wizard... What way/how does the HardSPL versions here prevent me from bricking the phone? How do I find the SPL version that is currently on my phone and can I revert back to the original SPL/remove hard CID so I dont void warranty..?
Tim what ROM are you using on your Diamond and how did you install it???
Also does the ROM posted by Tom have the Radio ROM (I think its 1.00.25.5 inc in the package guessing by the file name?) let me use Quad band network?
HTC does release the updates, but not on their site. Only to their resellers I believe.
Yes, it is essential to install hard SPL on your phone for any ROM you want to try. I am using walshieau's Elite 3.0 ROM 9 (which is very quick). This is what I did to install it:
1) Flash hard SPL signed version (which will hard reset your phone, so backup using PIM backup from pocketpcfreewares.com)
2) Flash the ROM of your choice
After this I decided to update the Radio to version .05
In order to do this I needed to first flash with UNsigned hard SPL, then flash the radio using CustomRUU. Now I have support for Telstra's NextG 850Mhz.
NightWolf88: check your PM and you can contact me by phone and I may be able to explain in more detail.
Thanks very much for the help Tim!!! Thanks to all the other people doing great work on these forums!!
Ok so from what I have read so far ( I posted this in the 1.93 ROM thread as well - http://forum.xda-developers.com/showthread.php?p=2416200&posted=1#post2416200) I just need some of my noobish questions answered, dont want to ruin my lovely Diamond :
From what I have read:
1. Backup device - Is there any way I can backup the ROM which is currently on my device (1.37.00.0 WWE)???
2. Upgrade to HardSPL signed as this is a signed ROM- download this file http://forum.xda-developers.com/showthread.php?t=400402 extract, run the .exe file... Follow the RomUpdateUtility.exe (RUU) wizard - SPL will flash and then with any luck get a message saying complete - job is done.
What does "1. do not try to use this SSPL to flash anything else other than an SPL file. it explicitly blocks other flashes anyway. SSPL is *never* a good way to flash OS images" mean... So can I not use this to update the device OS ROM to 1.93. in this thread??? I assume SSPL = Signed Second Program Loader..?
Do I need to use this unsigned version..? http://forum.xda-developers.com/showthread.php?t=400950 - It has overwrite protection..?
Finally - use volume down & soft reset to see that SPL/bootloader has installed/flashed correctly... Then to SAFELY get out of the bootloader softreset again...?
3. Upgrade the OS ROM using the .exe file in post 1 of this thread...
So I download the exe connect my device via active sync then follow the rest of the steps in the RUU.exe wizard, it will give me a progress bar on both the PC and the Diamond, the Diamond will then softreset with the new rom all installed..?
Questions:
Can someone please confirm the above method is correct to install the ROM on this page?
Does the Radio also update itself to 1.00.25.05 when running the exe in the post #1??? I.e. will I get quad band radio support???
Do I need the signed or unsigned SPL what is the best to use???
How do I dump the ROM that is currently on my device to PC/whats the best program? Do I need to do this for warranty etc or if I dont like the new ROM..?
To restore to original SPL I go to http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39 grab my stock SPL and then use the unsigned SPL RUU exe? What is SSPL-manual used for???
Also in the post by cmonex (http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39) he says "if you have signed hardspl, just go ahead and flash with normal RUU process (no overwrite protection in that one, as it is already only accepting htchackers signed files, there was no need for that)."
What is the normal RUU process???
If I use the signed SPL I can just use the RUU.exe that comes with that and copy the stock SPL to replace the .nbh file in the signed Hard-SPL folder and everything should run fine? No need to worry with the unsigned Hard-SPL version right?
As stupid as it may sound I still don’t get all this SPL/SSPL/Hard-SPL stuff, what is on the phone originally? and what changes with hard-spl download packages??? I assume SPL is a boot loader like BIOS on the “PC” or EFI on Intel-Apple Macs..? What is the difference between the stock SPL/bootloader on the phone and signed/unsigned hard-SPL that some of the guys here have made?
Thanks once again ,
NW
NightWolf88 said:
Thanks for the reply Riel/Tim, I have been to that page and enter in my SN and register but when I go to my device nothing comes up... I cannot see the Diamond listed under software downloads either..? I log into world wide...
Thanks for the reply, I have been to that page and enter in my SN and register but when I go to my device nothing comes up as well... SO I'd say HTC haven't release any ROM device updates... SO how do you guys get the exe for the diamond v1.93???
Click to expand...
Click to collapse
Same problem here!
Yes, I did use the search function but didn't find what I was looking for.
That being said, I have registered my Diamond on e-Club. (It's a French Orange one, so I used a hack I found on another forum to correctly register by changing "HT825" to "HT826" in the SN.) However, I don't see anything for the diamond available for download under "Phone Software Updates" and "Other Downloads."
So my question is: does HTC offer certain downloads only to certain SN?
The answer might have been already posted somewhere; if so please redirect me (and NightWolf88) to the correct thread if you know it!
Thanks
PS: NightWolf88, check out www.modmydiamond.info if you haven't already: it's a fantastic tutorial that will most likely answer most of your questions regarding the fine art of ROM flashing and restoring.
Yeah I have checked that page, great site.
From what I have read there are no HTC e-club updates for the Diamond yet, only updates going to resellers... I also emailed HTC Tech support - I got this reply:
Thank you for choosing hTC. Please note that there's no new rom for HTC Touch Diamond at the moment. We recommend you to visit our hTC HK website for the latest information as below
Click to expand...
Click to collapse
I wish that HTC would pull there finger out and release an official ROM.
After putting an Official Rom update on the e-club site but then taking it down pretty quickly, it seems strange they haven't released one yet.
Im holding out for an Official Rom, but I think i will just give in and flash a cooked rom in the end.
Gonna try flashing the Radio first as I havent got an issue with the Rom itself, just with the signal behaving very erratically!
Will see.
Great site tho xda devs and also the modmydiamond one to, some invaluable info on both of them.
Thanks everyone on here.
On my SN and registration I definatedly got provided with a new rom.
It is 1.37 in my case, in Dutch.
See attachment of screenshot of the Site:
Riel said:
On my SN and registration I definatedly got provided with a new rom.
It is 1.37 in my case, in Dutch.
See attachment of screenshot of the Site:
Click to expand...
Click to collapse
Yeah it seems that only device SNs that shipped with <1.37 have an update, there is no offical release of 1.93 which is (from what I have read) better than 1.37, but 1.37 was alot better than the 34s and 35s if you do a search around the net alot of reviewers got sent these ROMs which fixed initial lag issues...
I want to put 1.93 on my device, wanted offical htc release but I'm just going to use the one posted here...
Any one hjelp me with the ROM update???
NightWolf88 said:
Thanks very much for the help Tim!!! Thanks to all the other people doing great work on these forums!!
Ok so from what I have read so far ( I posted this in the 1.93 ROM thread as well - http://forum.xda-developers.com/showthread.php?p=2416200&posted=1#post2416200) I just need some of my noobish questions answered, dont want to ruin my lovely Diamond :
From what I have read:
1. Backup device - Is there any way I can backup the ROM which is currently on my device (1.37.00.0 WWE)???
2. Upgrade to HardSPL signed as this is a signed ROM- download this file http://forum.xda-developers.com/showthread.php?t=400402 extract, run the .exe file... Follow the RomUpdateUtility.exe (RUU) wizard - SPL will flash and then with any luck get a message saying complete - job is done.
What does "1. do not try to use this SSPL to flash anything else other than an SPL file. it explicitly blocks other flashes anyway. SSPL is *never* a good way to flash OS images" mean... So can I not use this to update the device OS ROM to 1.93. in this thread??? I assume SSPL = Signed Second Program Loader..?
Do I need to use this unsigned version..? http://forum.xda-developers.com/showthread.php?t=400950 - It has overwrite protection..?
Finally - use volume down & soft reset to see that SPL/bootloader has installed/flashed correctly... Then to SAFELY get out of the bootloader softreset again...?
3. Upgrade the OS ROM using the .exe file in post 1 of this thread...
So I download the exe connect my device via active sync then follow the rest of the steps in the RUU.exe wizard, it will give me a progress bar on both the PC and the Diamond, the Diamond will then softreset with the new rom all installed..?
Questions:
Can someone please confirm the above method is correct to install the ROM on this page?
Does the Radio also update itself to 1.00.25.05 when running the exe in the post #1??? I.e. will I get quad band radio support???
Do I need the signed or unsigned SPL what is the best to use???
How do I dump the ROM that is currently on my device to PC/whats the best program? Do I need to do this for warranty etc or if I dont like the new ROM..?
To restore to original SPL I go to http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39 grab my stock SPL and then use the unsigned SPL RUU exe? What is SSPL-manual used for???
Also in the post by cmonex (http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39) he says "if you have signed hardspl, just go ahead and flash with normal RUU process (no overwrite protection in that one, as it is already only accepting htchackers signed files, there was no need for that)."
What is the normal RUU process???
If I use the signed SPL I can just use the RUU.exe that comes with that and copy the stock SPL to replace the .nbh file in the signed Hard-SPL folder and everything should run fine? No need to worry with the unsigned Hard-SPL version right?
As stupid as it may sound I still don’t get all this SPL/SSPL/Hard-SPL stuff, what is on the phone originally? and what changes with hard-spl download packages??? I assume SPL is a boot loader like BIOS on the “PC” or EFI on Intel-Apple Macs..? What is the difference between the stock SPL/bootloader on the phone and signed/unsigned hard-SPL that some of the guys here have made?
Thanks once again ,
NW
Click to expand...
Click to collapse

Orange HTC Touch Diamond Rom

Hi guys wondered if somebody could help me I hanve an orange HTC touch diamond on rom version 1.37 and wamt to upgrade to 1.93 but when I try it tells me that i cant upgrade does this mean I have to unlock the phone or do I have to update the hard spl first before been able to update the rom to 1.93
You have to hard spl then you can update to any of the roms here. Try using the search feature, I know it is your first post, we have all been there
hi thanks have searched about on forum thats how found about hard spl but wasnt sure which one to use didnt want to brick my phone
http://www.planete-htc.com/index.php?mod=forum&ac=voir&cat=169&id=15903
Where did you find the 1.93 Orange ROM ? Or is it not the Orange one ? I've been looking for it in vain on french Orange's website... It is not even possible to register my own diamond phone (which is not listed in the possible owned phone even if it is in the catalog, as a matter of fact).
You can use any ROM, doesn't have to be an Orange one.
I only received my Diamond last week and found all the info I need to start flashing in this forum.
First you need to flash a new SPL, don't ask me what it means. A guide I read said there was a Soft and HardSPL. As you can guess the SoftSPL runs in the OS and umm the HardSPL runs in the bootloader !?
Without going in to too much detail as I'm not 100% sure myself, the HardSPL is how the hardware communicates with the OS, I guess much like the BIOS on a PC. And certain HardSPL's will only allow you to flash signed ROMs as a safeguard.
If you want to flash a new ROM, Radio or Splash/Boot screen then unless it's for your region and signed you'll first need to install an unsigned HardSPL. The most popular one seems to be the 1.40 SPL by Olinex. If you're not sure about what you're doing then install a signed HardSPL for now. This will only allow you to use the signed custom ROMs but at least you won't flash the wrong ROM to your device. Once you have a HardSPL flashed to you're device you can start flashing the different ROMs available.
It's impossible to recommed a ROM because everyone wants something different. I prefer to use lite ROMs with most of the default apps removed and no customs apps added. Things to make a note of are which orginal HTC ROM it is based on, which apps have been updated, which apps have been removed and what extra apps and tweaks are included.
Some ROMs also include Radios and Splash screens but the majority don't. Again decide on which radio and screen you want and flash in the same way as the ROM.
How to flash?
Most ROMs include the DiamondCustomRUU.exe app (a single file). Put this file into an empty folder. Extract the ROM, Radio or screen file and look for the file with an extension of .nbh. Copy only the .nbh file in to the folder where you copied DiamondCustomRUU.
Connect the Diamond to your PC via the USB cable. Make sure there is over 50% battery etc. Run DiamondCustomRUU.exe.
Make sure there is only one .nbh file in the folder or the RUU app won't know which one to use. You don't need to tell the RUU app what type of .nhb file it is either.
The modmydiamond site has most of the Q&A in one place about flashing ROMS on your handset.

[Q] Can't flash ROM/radio

Hello everyone,
I have an HTC Touch Diamond.
ROM version 1.37.404.3 NLD (original version)
Radio version 1.00.25.03
Also, its the GSM version
I started this weekend searching for ways of how to upgrade my HTC touch diamond's OS to WM 6.5. I used http://forum.xda-developers.com/showthread.php?t=416211
I downloaded every program I needed. I downloaded a radio version i liked (1.00.25.05.rar) and a ROM I liked (Energy.DIAMOND.28244.Sense2.5.Cookie.2.0.Dec.21.7Z). To update the radio, i dl'd the Custom RUU as indicated in the guide.
I upgraded my phone to the HardSPL as indicated in the guide. when everything was done, I tried to update my radio version as indicated. I placed the RUU in a seperate folder, and i placed the radio version in the same folder. My phone was synced and ready to be updated. I started the RUU. it asked me if I understand the risks, i continued. It asked me if my phone was ready, I continued. then it tried to read the files in the folder, but it said it didn't recognize them. I checked the folder and not only the radio was in it, but also: enter bootloader, ErrorBattery.fig, ErrorUSB.fig, ModelID.fig, rapitool, RomUpdateutility(the one i used to update my HardSPL, and wich I have deleted already), RUUGetinfo and RUUresource.dll.
So I retried and the same error occured. Then i tried to run RUU, and before clicking next, I removed all the files from the folder, except the radio. i click next and next, and instead of the wrong file error, it says my device isn't connected. I do not understand this as it was synced, and I could even move files to and from my device.
I retried several times with and without removing the files from the folder. NO SUCCES. The same result with my Energy rom
Please help me because I searched google and this site for people with the same problem, but I couldn't (and can't) find any. I have no idea, am I doing something wrondg here? Is it because the radio version is .rar? Do i need to dl a .rar program? like 7Zip? Or does the radio need to be a .nbh file
Also, I entered bootloader on my device, and it says my HardSPL is
SPL-1.40.OliNex . This is the HardSPL as indicated in the guide.
P.S: is the site modmydiamond.com not there anymore or something? Or is it my computer.
PPS: How's my english? I'm dutch and i'm doing Cambridge English at my school. If I do something wrong, pm me
PPPS: I am a beginner on this kind of computing. How does Rom work exactly?
EDIT: if this is on the wrong forum, where exactly do I have to place this?
well, you did everything nicely to flash the HSPL. but you seem to have missed out on mtty.
try mtty and we will begin again. (btw search for mtty in the Diamond ROM development thread. you cant miss it as it has been stickied)
as for your english...i didnt know you were dutch until i read the last line where you said u are dutch
hehe...so ur english is very good
DEAD NOW?
how exactly can i flash it?
its working

Categories

Resources