HTC Seriously failed, releasing incomplete code for the GB MR for our device. This one is patched together, thanks to a tip from RMK. All missing files were copied from the Vivo GB MR release.
http://dl.dropbox.com/u/8699733/vivow/vivow_gb_test1.zip
ce2ed2ce4e27b99c0f155ea614e5a90f vivow_gb_test1.zip
This is for use on Verison 2.18.605.3, or 2.18.605.4 or 3.02.605.1 based roms only
jcase said:
HTC Seriously failed, releasing incomplete code for the GB MR for our device. This one is patched together, thanks to a tip from RMK. All missing files were copied from the Vivo GB MR release.
http://dl.dropbox.com/u/8699733/vivo...w_gb_test1.zip
ce2ed2ce4e27b99c0f155ea614e5a90f vivow_gb_test1.zip
Click to expand...
Click to collapse
Getting a 404 error on the dropbox link
Edit: WOOT, working now.
jrizk07 said:
Getting a 404 error on the dropbox link
Click to expand...
Click to collapse
bah copy paste fail
Looking forward to trying this out. Nice work.
Sent from my ADR6350 using XDA App
Hopefully this leads to a 2.3 root solution.
Working fine so far. Maxed it out and ran stress test for about five minutes and all is well. Any chance of getting the other schedulers and scaling types in the future? Just want the best performance and best screen off battery savings. Great work though. I was hoping a dev work run with the source for sense once it was out(sort of apperently)
Sent from my ADR6350
xelsewherex said:
Working fine so far. Maxed it out and ran stress test for about five minutes and all is well. Any chance of getting the other schedulers and scaling types in the future? Just want the best performance and best screen off battery savings. Great work though. I was hoping a dev work run with the source for sense once it was out(sort of apperently)
Sent from my ADR6350
Click to expand...
Click to collapse
No, you will have to wait for a kernel dev to tackle it, or do it yourself. I am not a kernel dev, and this was more or less a test to see if we could get it compiling (since it was missing files from source).
Hmmm....whenever i finally get my inc2 rooted, if ever, im gonna hopefully use this.
me gusta.
Thanks jcase man your works appreciated
Sent from my HTC Incredible 2 using XDA Premium App
I installed this. Seems to be working good. Quadrant jumped up to around 2000 ( with indemand setting) 2200 ( with performance setting)
Thanks Jcase. Can you tell me what point of overclock is? I never see difference in real world performance. Where would i notice the bump most?
Sent from my ADR6350 using XDA App
Sherwood1 said:
I installed this. Seems to be working good. Quadrant jumped up to around 2000 ( with indemand setting) 2200 ( with performance setting)
Thanks Jcase. Can you tell me what point of overclock is? I never see difference in real world performance. Where would i notice the bump most?
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
I notice a big difference in loading of pictures in the Gallery, loading of messaging app, overall quickness.
Sent from my Incredible 2
Sherwood1 said:
I installed this. Seems to be working good. Quadrant jumped up to around 2000 ( with indemand setting) 2200 ( with performance setting)
Thanks Jcase. Can you tell me what point of overclock is? I never see difference in real world performance. Where would i notice the bump most?
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
Can you tell me what point of overclock is?
read the title. tells ya there.
@andybones i know what is lolol. But i have never noticed any performance bump except quadrant. So my question well is it worth it. If all i do is use web and data and no games.
Sent from my ADR6350 using XDA App
got a hard lock simply typing a text message on google voice. maybe my DINC2 can't handle 1.6 ghz.
Thought i was alone with rhe lock up. Had to go back to stock kernel until i better understand how work with overclocking.
Edit: reinstalled this kernel. This time i also installed Setcpu. All it well and right once again. It appears as though my dev doesn't like running at 1650 but is happy at about 1350. Will see how it goes. May tweak it more.
Don;t clock to 1.6ghz then
Does this disable perflock? I have no clue about sense kernels I'm just wondering if I can use things like Juicedefender to regulate clock speeds without having to rely on SetCPU unlock it on every boot.
Installed this and no my wifi doesn't work I will keep playing with it, but it will not let me connect to my wep network.
dobosininja said:
Installed this and no my wifi doesn't work I will keep playing with it, but it will not let me connect to my wep network.
Click to expand...
Click to collapse
How did you install it? It has the proper wifi driver, it should work fine.
franklin270h said:
Does this disable perflock? I have no clue about sense kernels I'm just wondering if I can use things like Juicedefender to regulate clock speeds without having to rely on SetCPU unlock it on every boot.
Click to expand...
Click to collapse
Should be disabled
Related
I liked this battery tweak when I had my hero. Can anyone make this or is there another way to do this with set cpu. I messed with the profiles
But two confusing for me.
Sent from my PC36100 using XDA App
pitmanr2003 said:
I liked this battery tweak when I had my hero. Can anyone make this or is there another way to do this with set cpu. I messed with the profiles
But two confusing for me.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Just so i know, What's that ?
Its a battery tweak that was made for htc hero. It would under clock when certain criteria were met too save battery.
Sent from my PC36100 using XDA App
Set CPU
Doesn't Setcpu do this?
smithgermany said:
Doesn't Setcpu do this?
Click to expand...
Click to collapse
sure does.
smithgermany said:
Doesn't Setcpu do this?
Click to expand...
Click to collapse
Yes but collins tweak had other modifications done to it that Setcpu does not do. It was actually a lot smoother and saved a lot more battery than setcpu
tasker could do most of it i'm sure.
Set cpu looks like it can doo most of it. But for newbies colin battery tweak was so simple. Can anyone tell me a good setup on set cpu
Sent from my PC36100 using XDA App
Avs will do alot for you. Get a kernel it Avs.
just get a cfs kernel and setcpu. thats basically what that tweak was...
I have snap bfs. It plays better with my phone. And with snap turbo it is lightning fast .
Sent from my PC36100 using XDA App
pitmanr2003 said:
I have snap bfs. It plays better with my phone. And with snap turbo it is lightning fast .
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Only to be used with CM6 right? Too many non-working things in CM6 for me. I love cyanogen but I don't know why they would develop a rom for an Evo with the most important thing missing, it's 4G capability!
collin battery tweak has a script with a ton of commands thats change more then what setcpu does. It was mostly made for cyanogen mod, with swap, and bfs kernel. Then from there it has changed and added alot more features within the system/kernel.
I was helping out with the scripts and testing in the very beginning stages. There is actually some of the commands you can change to increase performance.
is anyone working on it for the evo
Sent from my PC36100 using XDA App
DirtyShroomz said:
Only to be used with CM6 right? Too many non-working things in CM6 for me. I love cyanogen but I don't know why they would develop a rom for an Evo with the most important thing missing, it's 4G capability!
Click to expand...
Click to collapse
Because CM6 is for more devices than just the EVO. Before 6 final came out a lot of the coding was meant to cover a wide variety of phones. Now that 6 final is out coding is being focused on specific phones such as our EVOs. That and because, honestly, there's way more people in non 4G areas than there are in 4G coverage areas. Don't you worry. They'll get 4G working on CM eventually.
G2-Fast: A Phone as Turbocharged as You! (Now at 1.9GHz!)
Like all other developers here: I AM NOT RESPONSIBLE IF THIS BRICKS, BREAKS, FRIES, OR CAUSES A NUCLEAR EXPLOSION WITH YOUR PHONE.
SETCPU FAILSAFE AND OTHER PROFILES ARE A MUST!
Thanks to Cyanogen
Performance Test on 1.8GHz here
Update.zip available
Gingerbread Version
Older Gingerbread VersionsFroYo Version is broken until further notice
Source
Now on Kernel Manager!
Flippy125 said:
I just finished compiling a 1.8Ghz kernel. If I uploaded it would you be interested? If nobody is interested I will just keep it for myself.
Click to expand...
Click to collapse
Have voltages been tweaked to allow you to run it at these speeds and it still be stable?
Edit: Have you compiled the new wifi driver to go with the kernel as well?
I think it would be best if you just posted it anyway. Those interested will download it, use it, comment, etc. Those uninterested will ignore.
Sounds crazy. How would it effect bacon bits if you have that installed?
Sent from my T-Mobile G2 using XDA App
Yes I have the wifi driver and no it wont affect bacon bits. It is actually now 1.9Ghz and I'm reaching for the big 2.0. I am using coolbho3's source code and 1.8 worked on 1400Mhz and 1.9ghz is at 1500. It gets a little warm but setcpu profiles are a must
Flippy125 said:
Yes I have the wifi driver and no it wont affect bacon bits. It is actually now 1.9Ghz and I'm reaching for the big 2.0. I am using coolbho3's source code and 1.8 worked on 1400Mhz and 1.9ghz is at 1500. It gets a little warm but setcpu profiles are a must
Click to expand...
Click to collapse
What have the voltages been tweaked to? If the Cpu isnt getting enough voltage and you continue to overclock your gonna begin to get negative effects followed by freezing and rebooting. Not really concerned too much about battery life as much as stability.
EDIT: Oh NVM i see what your saying the Mhz after the 1400 threw me off
Seeing as this post already has so many posts I'll be posting it in a bit after I have tested for bugs. Watch this thread for updates.
Flippy125 said:
Seeing as this post already has so many posts I'll be posting it in a bit after I have tested for bugs. Watch this thread for updates.
Click to expand...
Click to collapse
Cool can't wait
Sent from my HTC Vision
Flippy125 said:
Seeing as this post already has so many posts I'll be posting it in a bit after I have tested for bugs. Watch this thread for updates.
Click to expand...
Click to collapse
Hurry up!! I want this in my life. Lol jkjk...
Sent from my HTC Vision using XDA App
linkmaster_6 said:
I just thought this was funny
Click to expand...
Click to collapse
Lol that's great. 2.0Ghz didn't boot and 1.9Ghz is the highest I could get to stable. I will be uploading in a few minutes.
This is CRAZY! Please, I don't want my phone to explode
I want my phone this turgocharged!
I assume you will post posting your source too?
eViL D: said:
I assume you will post posting your source too?
Click to expand...
Click to collapse
Yup I am just getting the uploads ready
Oh my. This sounds like a great way to turn your phone into a toaster. Though if I try it, I'm labeling the 1.9Ghz SetCPU profile "ludicrous speed"!
Flippy125 said:
I will be uploading the 1.9Ghz kernel very soon.
Click to expand...
Click to collapse
+1
Sent from my HTC G2-Z using XDA App
1.9ghz!? Haha wow... not sure why youd need your phone at that speed but its nice to know our G2 can reach such speeds!
Good ups bro!
Sent from my T-Mobile G2 using XDA App
TL24 said:
1.9ghz!? Haha wow... not sure why youd need your phone at that speed but its nice to know our G2 can reach such speeds!
Good ups bro!
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Overall speed and things like PSX4Droid and other CPU heavy applications.
I will definately be trying this when I get home...good looks
Anyone care to mirror this? Rapid**** always tells me I can't download because I'm running a parallel download... even though I'm not. Mediafire maybe?
Just wondering if anyone was overclocking your phones while using ICS?
i have tried many ROMS and Kernals posted by you all, been doing alot of underclocking mainly, but just was curious as if there was a way to overclock using any of the kernals....
i DO realize that alot of people would rather underclock to save batt...including myself. just was curious and willing to try it out....
any pointers or apps avail?
thanx!
chris-allen said:
Just wondering if anyone was overclocking your phones while using ICS?
i have tried many ROMS and Kernals posted by you all, been doing alot of underclocking mainly, but just was curious as if there was a way to overclock using any of the kernals....
i DO realize that alot of people would rather underclock to save batt...including myself. just was curious and willing to try it out....
any pointers or apps avail?
thanx!
Click to expand...
Click to collapse
We can't overclock until we have the source code from Samsung
Sent from my SPH-D710 using XDA
You can overclock and undervolt with tegrak. I don't do too much overclocking as it is kind of pointless with the chip we have. But I use tegrak to under volt.
oh... well thanx for the replies.. i guess ill wait till the codes come out.. i was using teragat when i had GB..
seems like overclocking would make sence wih ics considering its being released on higher powered phones. just seemed like if i overclocked at 1.4ghz and chose a handy set of tweeks for one of the devs, then any and all lags and microsec freezes would go away...
anyways.. thanx again...
Sent from my SPH-D710 using XDA
I am looking forward to being able to overclock this phone to on CM9, it will definitely help extend the life of our phone a little longer. I plan on keeping this phone for at least another year so the more speed the better
Sent from my SPH-D710 using XDA
chris-allen said:
oh... well thanx for the replies.. i guess ill wait till the codes come out.. i was using teragat when i had GB..
seems like overclocking would make sence wih ics considering its being released on higher powered phones. just seemed like if i overclocked at 1.4ghz and chose a handy set of tweeks for one of the devs, then any and all lags and microsec freezes would go away...
anyways.. thanx again...
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I overclocked my ICS to 1.4GHz. That is the highest it will go without having to start bumping up the voltage. The highest I got it to was 1.8GHz with voltage increases. Anything higher than 1.4 requires me to over volt the phone and thus eats battery fast. I settled on 1.4 and a good trade off for speed and battery life. If I plan on being out away from a charger I can use Teragat to under clock my phone to get maximum battery life.
brooksyx said:
I am looking forward to being able to overclock this phone to on CM9, it will definitely help extend the life of our phone a little longer. I plan on keeping this phone for at least another year so the more speed the better
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Overclock to extend battery life? Explain this one to me please....
playya said:
Overclock to extend battery life? Explain this one to me please....
Click to expand...
Click to collapse
he is saying that overclocking will keep our phones alive... as in not an out of date phone...sadly ours will be very very very soon...
jamcar said:
he is saying that overclocking will keep our phones alive... as in not an out of date phone...sadly ours will be very very very soon...
Click to expand...
Click to collapse
I think that was the other guy but I digress.... Hey after reading about the SG3 being able to use voice and data at the same time has me thinking about using one of my upgrades
playya said:
I think that was the other guy but I digress.... Hey after reading about the SG3 being able to use voice and data at the same time has me thinking about using one of my upgrades
Click to expand...
Click to collapse
You can talk and browse on this phone. WiMax and CDMA uses two different radios.
thenameisnigel said:
You can talk and browse on this phone. WiMax and CDMA uses two different radios.
Click to expand...
Click to collapse
The sgs3 has svdo you can talk and browse simultaneously on 3g as well as lte. The et4g u can only browse and talk simultaneously of you're in a wimax area
Sent from my SPH-L710
-EViL-KoNCEPTz- said:
The sgs3 has svdo you can talk and browse simultaneously on 3g as well as lte. The et4g u can only browse and talk simultaneously of you're in a wimax area
Sent from my SPH-L710
Click to expand...
Click to collapse
I thought you was in a WiMax area, sorry.
Sent from my SPH-D710 using Tapatalk 2
-------------------------------------------------------------------------------------------
Files and source:
www . der kernel . com
Flash the kernel designated for your rom, either CM9 or STOCK.
CM10....As CMX on the site (ignore it's under ics, cmx == cm10)
-------------------------------------------------------------------------------------------
Featuring:
Offering lowered voltages
Build optimizations
Performance through research
Removed wasteful debugging
Scheduler, Governor tweaks
Improved Colors (Fixed as of right now)
480MHz GPU
Up to 1836MHz or 1728 (as noted in filename)
Bull**** Free (Not pushing buzzwords to drop them later like others)
Morfic's in the Haus! Hell yah! Glad to have you here Morfic! Your kernels are the best! Still have my G2X because of you man.
Wow, thanks! Your work spreads everywhere!
Sent from my SGH-T999 using xda premium
Let me tell you, this is where it's at right here!
For those of you who don't know Morfic and his work, let me tell you, I completely vouch for it! I swore by it with my Galaxy Nexus and now that it's here, I'll do the same.
Nobody tops his kernels!
wait... is this kernel bull**** free?
Sent from my SGH-T999 using xda premium
LOL at the installation script ... "System successfully corrupted. Panic now"... Flashed ALPHA23 and running good!
Thanks.
Flashed Alpha 19 and all is well. Did a Quadrant just to play around and got a 5666 on first try @ 1.89.
True awesomeness.
This thing blazes on aokp with transitions on .5 with jelly bean transitions flashed its obscene!!!
Sent from my SGH-T999 using xda app-developers app
stonew5082 said:
wait... is this kernel bull**** free?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Just sniff it, roses man, roses.
es7241 said:
LOL at the installation script ... "System successfully corrupted. Panic now"... Flashed ALPHA23 and running good!
Thanks.
Click to expand...
Click to collapse
People even tried to copy that silly little line
babymatteo said:
Flashed Alpha 19 and all is well. Did a Quadrant just to play around and got a 5666 on first try @ 1.89.
True awesomeness.
Click to expand...
Click to collapse
1836 you mean?
hey awesome guy that everyone praise....how much voltage did you lower man?
Loved your kernels for the Sensation. Awesome.
G1_enthusiast said:
hey awesome guy that everyone praise....how much voltage did you lower man?
Click to expand...
Click to collapse
At this point pretty much only the low end, once i have this kernel at a more solid place i will push voltages overall further.
morfic said:
At this point pretty much only the low end, once i have this kernel at a more solid place i will push voltages overall further.
Click to expand...
Click to collapse
yeap i think i would speak for most when we say...battery life is more of a priority than speed, since this thing is fast and smooth out of the box.
Best kernel out I gave them all a good run but this one out shine them all.
Sent from my SGH-T999 using xda premium
there is one weird gov which i never seen...MSM-DVCS or something like that, can someone chime in.
G1_enthusiast said:
yeap i think i would speak for most when we say...battery life is more of a priority than speed, since this thing is fast and smooth out of the box.
Click to expand...
Click to collapse
My kernels are more about removing waste than adding stuff (Although i do grab features that are worth while, i am more referring to patches fixing issues noone knew they had, just to inflate git logs)
Things i do add is tweaks to cool overly Yellow panels.
And it's usually possible to benefit both ways, keep Max Freq low and grab all voltage drops and other savings, or raise it up and enjoy the extra power.
Morfic, would much rather see you over on the Sprint version, but glad to see you on the SGS III. Used to use your kernels on the Nexus S and they were the best around. Hopefully once you get everything settled in, we might see you branching to other carriers.
G1_enthusiast said:
there is one weird gov which i never seen...MSM-DVCS or something like that, can someone chime in.
Click to expand...
Click to collapse
This might a little..
http://forum.xda-developers.com/showthread.php?t=1758945
Sent from my SGH-T999 using Tapatalk 2
please close
Btw alcohol was used to create this. Might be flammable.
Awesome, is there a slight rundown of what this has to offer over stock?
well, it may or may not be faster/more battery life. its a test kernel to find build method and make sure things are going to work before putting 1000s of lines of code changes in
Sounds good. Flashing now, will test as much as I can.
Will test also thanks
Sent from my LG-LS970 using xda app-developers app
How's the tests going? How risky is this?
Sent from my LG-LS970 using xda premium
So far it seems to be running well. Run Quadrant and it is using Eco mode as my scores varied by 2000. Don't care about scores just the feel.
The governor is ondemand and uses 1134 alot more. Which is nice not seeing 1512 mostly so battery should be better.
Do have a question though. Do you want us to test different governors? If so, what's the preferred program?
Thanks joker!! It's great to finally have a kernel to play with!!
edit. Decided to use Set CPU. Seems to be working fine. I take that back about using 1134. Guess it just happened to be the speed of choice by what I was running. Still mostly 384 and 1512. And of course Deep sleep
This has worked fine in my testing Bluetooth steaming and calls work without issue. Camera works so does WiFi. I still see the msm host wake lock but it's not that high. Got 20 thousand in antutu so it seems to work without issue.
engine95 said:
So far it seems to be running well. Run Quadrant and it is using Eco mode as my scores varied by 2000. Don't care about scores just the feel.
The governor is ondemand and uses 1134 alot more. Which is nice not seeing 1512 mostly so battery should be better.
Do have a question though. Do you want us to test different governors? If so, what's the preferred program?
Thanks joker!! It's great to finally have a kernel to play with!!
edit. Decided to use Set CPU. Seems to be working fine. I take that back about using 1134. Guess it just happened to be the speed of choice by what I was running. Still mostly 384 and 1512. And of course Deep sleep
Click to expand...
Click to collapse
I didnt do anything to the govenors on this release. This is mainly a basic kernel close to stock with a couple tweaks.
bizzshow26 said:
This has worked fine in my testing Bluetooth steaming and calls work without issue. Camera works so does WiFi. I still see the msm host wake lock but it's not that high. Got 20 thousand in antutu so it seems to work without issue.
Click to expand...
Click to collapse
It won't get rid of wake locks. They do have a purpose, but it should reduce them. Hopefully
Sent from my LG-LS970 using xda app-developers app
Flashed no problems. Chuckled at "raping malware" and "licking ICS." We'll see what happens after it settles in over a few days.
Sent from my LG-LS970 using Tapatalk 2
So far everything seems to be going well. No stability issues, camera and WiFi work fine, everything runs smoothly. Though its hard to see if this runs better or not since it ran pretty well from stock.
Woohoo! Good to see you back Joker! I was a religious follower in the MoPho forums. I don't post very often but I just wanted to say it's good to see you and I can't wait to see what you do with this ridiculously powerful phone.
Re: jokers kernels 1/17/13
tested the oc kernel and its actually works well except WiFi is broken and can't OC,
just posting info for the dev
Sent from my LG-LS970 using xda app-developers app
Re: jokers kernels 1/17/13
sharkboy0901 said:
tested the oc kernel and its actually works well except WiFi is broken and can't OC,
just posting info for the dev
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
I never released the kernel, but yeah I reverted those oc's and decided to handwrite it. Plus I wanted to update stockish.
So Dont use octest1. It was a test.
Sent from my LG-LS970 using xda app-developers app
Re: jokers kernels 1/17/13
jokersax11 said:
I never released the kernel, but yeah I reverted those oc's and decided to handwrite it. Plus I wanted to update stockish.
So Dont use octest1. It was a test.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Sorry hahaha couldn't help myself I'm a flashaholic
A question:
What's the point of the UC kernel if one can just lower clock speeds on OC kernel and stockish kernel?
Sent from my LG-LS970 using xda app-developers app
sharkboy0901 said:
Sorry hahaha couldn't help myself I'm a flashaholic
A question:
What's the point of the UC kernel if one can just lower clock speeds on OC kernel and stockish kernel?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
The gpu/avp/mem/cpu/etc etc will be underclocked and undervolted. sort of a "hey we have way way to much phone and everything is designed for slower crap anyways so lets also go slow" kinda kernel
Re: jokers kernels 1/17/13
Because these kernels also have libs in the zip, are we OK to just move kernel to kernel?
Sent from my LG-LS970 using xda premium
engine95 said:
Because these kernels also have libs in the zip, are we OK to just move kernel to kernel?
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
yes
Re: jokers kernels 1/17/13
Been on it since last night and its going good , great battery life increase. Still seeing about 40 minute of msm wake lock since being unplugged 7 hours. Thanks !
Sent from my LG-LS970 using xda app-developers app