Is this flashable to the Epic?
http://project-voodoo.org/download
It has many fixes such as lagfix (which is ext4, and most users for the epic already have it), color optimization, and making the speakers louder.
http://project-voodoo.org/color
This is what I am really looking for and was just wondering if this was available to the epic yet.
Thanks
No and don't try. Give it time and the devs will port
Sent from my SPH-D700 using Tapatalk
whats this lagfix?
Someone will port it over soon enough
Sent From My Evo Killer!
churro7 said:
whats this lagfix?
Click to expand...
Click to collapse
Something we don't need. Seriously it's been mentioned in excess of 500 times and won't benefit us at all, it only has any results for the international Galaxy-S and Captivate.
ok we may not need this but what lag is spoken of? i used captivate and fascinate i notice no lag
Some captivates and vibrants had problems reading from the internal memory card which caused lag
I flashed voodoo to my epic.... don't do it!!!
So what now??!! Help! The (voodoo 5.5) kernel flashed alright and now the phone will not reboot. I can still get to cwm and when I try to reboot I get stuck in a boot loop. Phone is rooted with no other mods. I obviously got flash happy and did not read up first. F*#! Can anyone out there help me?
Enter Download Mode and Odin Back to DL18, EB13 or EC05
Thats probably the only way for you now if you can't get back to CWM. If you can, then just reflash a new ROM
Cbisk said:
So what now??!! Help! The (voodoo 5.5) kernel flashed alright and now the phone will not reboot. I can still get to cwm and when I try to reboot I get stuck in a boot loop. Phone is rooted with no other mods. I obviously got flash happy and did not read up first. F*#! Can anyone out there help me?
Click to expand...
Click to collapse
Just flash a new kernel for the "EPIC"
Sent from my SPH-D700 using Tapatalk
Thanks!
Thanks guys.... lucky I could get to cwm. flashed new rom. lesson learned.
hey guys i came from stock and flashed zedos v2 with odin and then flashed v3 using odin....well i wanted to try the stock kernal and tried to flash that using odin...well odin says it succesfully flashed but on reboot i am stuck on the splash screen with the triangle and my phone is basically locked there...so i go back into download mode and reflash v3 and all is well again can someone help me out here...i am having no probs with v3 just trying to help the devs and wanted to see if stock kernal would remove yellow triangle.thanks in advance
Sounds like your download is corrupt. Grab the kernel again and repeat.
ok will try thanks will post back in a few
hellz yeahz thanks leather neck it seems i downloaded the first eb3o tar and bubbys is a newer one i presume..here we go ....i still have root still running super user 3 and still have over clock capability using cpu master and the muther freking triangle is gone and have stock intro woohoo!!!i have not experinced any los in any of the kernals ive flashed....... been running v3 since the actual second it was released....... although my phone would not dial out earlier today on v3 after i had tried to install samba...dont know if i need to install a linux shell for samba to work but thats another thread......dont know if i have lost cwm must check on that but man i am feeling really lucky thanks zedo and thanks leatherneck....i would still like to post in the dev forum to help out the devs but i have to post like six more times i think not unless a mod or senior member could fast track me there...not new to xda just forgot my old username and password thanks leatherneck
UPDATE!!!!!.......DO NOT HAVE OC CAPABILITY after flashing to stock kernal!!! but!!!!...my quadrant scores at 1.2 are hitting 3846!!! and thats with everything running and all stock programs still installed...... well i did delete nascar lol!!everything is working ..wifi,3g,4g, if there is anything you want me to check just say it i will be happy to help....oh cwm is no longer there...
Correct, this is a stock kernel, so no OC and no CWM.
Sent from my SPH-D710 using xda premium
I bought a second hand xperia play a few days ago and now looking to whizz things up a bit with a new Rom.
It's already been rooted but looks to have a stock Rom running
Here's the details
2.3.4
Kernal version [email protected]#10
Build number 4.0.2.A.0.42
Basically I'd like a properly established Rom without the bloatwear, every time I open task manager theres about 15 things open when I'm not using them
Sent from my R800i using XDA
Check the dev section out for a rom find something you like
Sent from my R800a using XDA App
thatsupnow said:
Check the dev section out for a rom find something you like
Sent from my R800a using XDA App
Click to expand...
Click to collapse
From my details above what do I have installed? I'm not too familiar with with all this :$
Sent from my R800i using XDA
Jokawild 2.5. Trust me....after using it you won't switch again till final ice is released.
jaygrae said:
Jokawild 2.5. Trust me....after using it you won't switch again till final ice is released.
Click to expand...
Click to collapse
Sounds good, how do I install it in simple terms? Sorry if I sound like a orange :-S
Is it just a straight install or do I need to mess with kernels etc,
How's yours set up? Rom/Kernel etc
Help is much appreciated
Sent from my R800i using XDA
mozzy said:
Sounds good, how do I install it in simple terms? Sorry if I sound like a orange :-S
Is it just a straight install or do I need to mess with kernels etc,
How's yours set up? Rom/Kernel etc
Help is much appreciated
Sent from my R800i using XDA
Click to expand...
Click to collapse
Since it already has doomlord's kernel on it, it is rooted and the bootloader is unlocked, so you can probably use fastboot to install most roms. If you want compatibility for all the games, stick with GB. If you go to an ICS build, you'll likely have problems with certain games crashing, graphical errors, or gamepad not working.
I have no problems with the gamepad so far using DarkForest ICS.
I tried ICS++, I prefer Darkforest still. Probably sticking with it till the real ICS.
There are so graphical issues, but its pretty nice, no bloatware either.
If you already have a kernel with recovery, all you need to do is install the .zip file for the ROM through it.
Put the zip on your sd card, reboot the phone. While it boots and the light turns blue, press the back button.
I attempted to update the kernel earlier and bricked my phone, I the fastboot method and actually completed the flash, when I powered on the mobile it was just displaying a black screen,
After looking about I got the stock rom and flashed it, and its working again!
Now my mobile is on stock rom with stock kernel,
It displays a message saying theres a system update available but when I connect to pc I get some message saying the software cannot be installed because the device has unauthorized software on it, I also got this message before I flashed to the stock firmware so it seems that they know my mobile was rooted etc and cant update through their software...
Could someone kindly walk me through what I need to do to put doomkernel v13 and jokawild rom on,
Thanks
Sent from my R800i using XDA
How does jw with doomkernal 13 compare to team stock with stock kernal?
swebosdev said:
How does jw with doomkernal 13 compare to team stock with stock kernal?
Click to expand...
Click to collapse
I wish I knew
Sent from my R800i using XDA
SirRudolph said:
I have no problems with the gamepad so far using DarkForest ICS.
I tried ICS++, I prefer Darkforest still. Probably sticking with it till the real ICS.
There are so graphical issues, but its pretty nice, no bloatware either.
Click to expand...
Click to collapse
have you tried Age of Zombies? and hows your battery? last time I used darkforest I'd only get 5 hours of battery life with just texting and listening to music :S
Any suggestions,
Sent from my R800i using XDA
mozzy said:
I attempted to update the kernel earlier and bricked my phone, I the fastboot method and actually completed the flash, when I powered on the mobile it was just displaying a black screen,
After looking about I got the stock rom and flashed it, and its working again!
Now my mobile is on stock rom with stock kernel,
It displays a message saying theres a system update available but when I connect to pc I get some message saying the software cannot be installed because the device has unauthorized software on it, I also got this message before I flashed to the stock firmware so it seems that they know my mobile was rooted etc and cant update through their software...
Could someone kindly walk me through what I need to do to put doomkernel v13 and jokawild rom on,
Thanks
Sent from my R800i using XDA
Click to expand...
Click to collapse
Flash stock ROM with flashtool, load fastboot, flash kernel image for DooMKernel, boot into recovery, clear cache, apply the update.zip for jokawild, done.
If you need more detailed instructions I'll write out a full guide later when I can use my home PC.
Actually, I was thinking of doing a full guide with pictures anyway.
Sent from a Galaxy far, far away
captain67 said:
Flash stock ROM with flashtool, load fastboot, flash kernel image for DooMKernel, boot into recovery, clear cache, apply the update.zip for jokawild, done.
If you need more detailed instructions I'll write out a full guide later when I can use my home PC.
Actually, I was thinking of doing a full guide with pictures anyway.
Sent from a Galaxy far, far away
Click to expand...
Click to collapse
Oh I have got jokawild flashed and doomkernel but having battery issues with the latest update,
I wanted to know any other Rom suggestions
Sent from my R800i using XDA
mozzy said:
Oh I have got jokawild flashed and doomkernel but having battery issues with the latest update,
I wanted to know any other Rom suggestions
Sent from my R800i using XDA
Click to expand...
Click to collapse
if u want to play games, better stay with gb.. for ics, darkforest is the best for me
---------- Post added at 02:23 PM ---------- Previous post was at 02:20 PM ----------
mozzy said:
I attempted to update the kernel earlier and bricked my phone, I the fastboot method and actually completed the flash, when I powered on the mobile it was just displaying a black screen,
After looking about I got the stock rom and flashed it, and its working again!
Now my mobile is on stock rom with stock kernel,
It displays a message saying theres a system update available but when I connect to pc I get some message saying the software cannot be installed because the device has unauthorized software on it, I also got this message before I flashed to the stock firmware so it seems that they know my mobile was rooted etc and cant update through their software...
Could someone kindly walk me through what I need to do to put doomkernel v13 and jokawild rom on,
Thanks
Sent from my R800i using XDA
Click to expand...
Click to collapse
u have unlock bootloader.. it cant be update using pc companion.. u need to relock it back using .ftf file via flashtool
Hello. I've tried to find this answer through searching but have had not much luck. I was wondering if its possible to use a custom kernel with an unrooted stock from. I would like to increase battery life but my company uses Good for Enterprise which cannot function on a rooted device. Any help here would be much appreciated.
scottasu said:
Hello. I've tried to find this answer through searching but have had not much luck. I was wondering if its possible to use a custom kernel with an unrooted stock from. I would like to increase battery life but my company uses Good for Enterprise which cannot function on a rooted device. Any help here would be much appreciated.
Click to expand...
Click to collapse
As far as i know you have to root your phone to install a custom kernel. So you might want to look into getting an extended battery.
I believe that you could. You wouldn't be able to change any of the kernel setting tho unless maybe you could make flashable zips to change them.
Sent from my Nexus S 4G using Tapatalk 2
A kernel comes way before any user installed app. You can indeed install a custom kernel without root, either by fastboot or cwm. Keep in mind you dont even need to flash cwm permanently, just temporarly to flash kernel zip.
Sent from my i9250 using Forum Runner
bk201doesntexist said:
A kernel comes way before any user installed app. You can indeed install a custom kernel without root, either by fastboot or cwm. Keep in mind you dont even need to flash cwm permanently, just temporarly to flash kernel zip.
Sent from my i9250 using Forum Runner
Click to expand...
Click to collapse
Good to know.. Thanks
Hi,
I got my phone stuck on bootloop, and can't find a good idiot-proof guide on how to fix this without the ability to get into recovery.
Here's what happened:
Last night I figured I'd give it another shot trying to get a custom rom on my Arc. This didn't work because I couldn't get into recovery anymore (??)
So just now I figured I'd re-install CWM, so I ran the program, it didn't work.
So I ran it again; Didn't work.
Well, I ran it again, and the program said it worked; So i try to boot into recovery, and it's boootlooping ((
I don't know what happened here (it has to have something to do with the cwm installation program), and I don't really care at this point. I just hope there is someone here that's willing to write up how to get it working again.(in an idiot-proof guide )
Thanks in advance guys
I would just re install stock either by using pcc or seus, or flashtools which is the preferred method for most.
If using flashtools you can choose which stock rom to use look in the stickies for the need roms etc.
Sent from my LT18i using XDA App
flash the kernel mentioned by the developer of the ROM..it might work
Hey, already fixed it right after this post. I flashed stock firmware.
Thanks for responding anyway
Sent from my Xperia Arc using XDA
martijnrosielle said:
Hey, already fixed it right after this post. I flashed stock firmware.
Thanks for responding anyway
Sent from my Xperia Arc using XDA
Click to expand...
Click to collapse
were you using my CWM app on ICS? that is prob why you had problems i have not had time to update it for the latest firmware
Pvy.