Bada 2.0 kies problem - Bada Software and Hacking General

After i flashed to Bada 2.0 my wave 2 does not recognize by Kies, is there any solution. thanks for advance

try to re install the drivers, just follow this steps:
1. Open Kies but dont connect your phone.
2. Go to Tools>Install drivers

Thanks a lot, it worked,
pao9195 said:
try to re install the drivers, just follow this steps:
1. Open Kies but dont connect your phone.
2. Go to Tools>Install drivers
Click to expand...
Click to collapse

Bada 2.0 there will be official for Samsung Wave 2 ? How did you update ? Sorry for my english i'm from romania.

Related

[Q] Help! Odin can't detect my phone!

odin suddenly can't detect my phone, windows said unable to install the msm7x30 driver (when in download mode). need help quick coz I had bootloop on my phone
try with the phone off
minatovladoski said:
odin suddenly can't detect my phone, windows said unable to install the msm7x30 driver (when in download mode). need help quick coz I had bootloop on my phone
Click to expand...
Click to collapse
Many possible solutions:
- Reinstall Kies.
- Go to the Driver-Manager of Windows(while phone is plugged in), than search for the device -> right click on the phone and press on uninstall, before pressing on Ok you should mark drivers to be uninstalled too.
- Use another PC
Try first these, if it doesn't help I might come up with something different.
greets
THE-E
THE-E said:
Many possible solutions:
- Reinstall Kies.
- Go to the Driver-Manager of Windows(while phone is plugged in), than search for the device -> right click on the phone and press on uninstall, before pressing on Ok you should mark drivers to be uninstalled too.
- Use another PC
Try first these, if it doesn't help I might come up with something different.
greets
THE-E
Click to expand...
Click to collapse
I've tried the third option, but the same problem exist (windows tried to install msm7x30 driver). I'll try first n second option
minatovladoski said:
I've tried the third option, but the same problem exist (windows tried to install msm7x30 driver). I'll try first n second option
Click to expand...
Click to collapse
Thats not a good sign. The download mode is activated I guess ?
If yes, than Windows and ODIN should detect your phone (with the right drivers, which Kies provides, installed of course).
Have you flashed before and did something go wrong ?
greets
THE-E
THE-E said:
Thats not a good sign. The download mode is activated I guess ?
If yes, than Windows and ODIN should detect your phone (with the right drivers, which Kies provides, installed of course).
Have you flashed before and did something go wrong ?
greets
THE-E
Click to expand...
Click to collapse
yeah I also guess it's not a good sign, coz last time I connect to odin it's work perfect 1 month ago I recall to flash CWM and remove CWM, yeah remove it coz upgrade OTA. right now am re-downloading the kies from samsung, to try first opt.
Edit: thanks THE-E, re-installing kies solve the problem
Odin Quest
minatovladoski said:
odin suddenly can't detect my phone, windows said unable to install the msm7x30 driver (when in download mode). need help quick coz I had bootloop on my phone
Click to expand...
Click to collapse
Like Soul of Guardian and Tamer Saga, Odin Quest conjures up a fantasy world where path-tracking, pet training, online trading, equipment crafting and skill learning are all possible.

GT-I9000 gos directly into download mode >> Please Help <<<

I have GT-I9000 Mobile, my mobile now is not working, when you turn it on it gos directly into download mode, and when i connect it to computer it is unrecognized device.
do driver worked and ODIN is not recognize it also.
I tried Samsung Kis and other ROM methods nothing worked.
but my mobile is going directly to the download mode without touching any buttons.
Please Please Please help .
Thanks
Mhran said:
I have GT-I9000 Mobile, my mobile now is not working, when you turn it on it gos directly into download mode, and when i connect it to computer it is unrecognized device.
do driver worked and ODIN is not recognize it also.
I tried Samsung Kis and other ROM methods nothing worked.
but my mobile is going directly to the download mode without touching any buttons.
Please Please Please help .
Thanks
Click to expand...
Click to collapse
Try downloading the Nexus S usb drivers and hope that will get it recognized. Also try different USB cables and a different computer.
Sent from my ASUS Transformer Pad TF300T
I will try the Nexus S driver
chrome6boy said:
Try downloading the Nexus S usb drivers and hope that will get it recognized. Also try different USB cables and a different computer.
Sent from my ASUS Transformer Pad TF300T
Click to expand...
Click to collapse
I will try the Nexus S driver, but i tried different cable and computer, dos not work.
thanks
Try to remove Kies and all drivers you have. Install this http://forum.xda-developers.com/showthread.php?t=728929 and try it. Good luck.
PS: Also try it with Odin 1.83
udkSD said:
Try to remove Kies and all drivers you have. Install this http://forum.xda-developers.com/showthread.php?t=728929 and try it. Good luck.
PS: Also try it with Odin 1.83
Click to expand...
Click to collapse
Thanks man but did not work, I tried drivers, cables computers ... etc.
I think the problem is with the kernel or boot loader but to fix it you need to connect the device with the computer .
and always says unrecognized device.
1. Try to post in the correct section
2. Do USB really work, or is it may not working ?
3. UNINSTALL the i9000 driver.
4. download this HERE
5. install the driver, restart your computer.
6. now it HAS TO work, if not, then the hardware should be the fault !
BY THE WAY : try this on another computer to be shure you did everything fine !!
saphirrot said:
1. Try to post in the correct section
2. Do USB really work, or is it may not working ?
3. UNINSTALL the i9000 driver.
4. download this HERE
5. install the driver, restart your computer.
6. now it HAS TO work, if not, then the hardware should be the fault !
BY THE WAY : try this on another computer to be shure you did everything fine !!
Click to expand...
Click to collapse
Thanks MAN
1- Please tell me what section should I put my post in .
2- I have GT-I9000 and Galaxy S2 , the USP port is fine, and the cable is fine
3- I tried 3 computers windows xp , 7 and 7 64bit
4- I am afraid that you are right ... it is a hardware issue. , but how can it be if the mobile is starting and going to the download mode ???
thanks anyway .
The correct section would be the Q&A section. This is the Android Development section.
Mhran said:
4- I am afraid that you are right ... it is a hardware issue. , but how can it be if the mobile is starting and going to the download mode ???
Click to expand...
Click to collapse
I think there is some problem on your phones main board
I am afraid that you are right ... it is a hardware issue. , but how can it be if the mobile is starting and going to the download mode ???
Click to expand...
Click to collapse
I ****ed up my USB port after 19 months of usage... it was charging, but no reply or identification from the port... samsung repaired it and everything is working fine... so maybe you broke it too ?
Have you try with another computer ?... :cyclops:

PC won't recognise GT-N7100 when connected.

I have read lots of threads in this forum but no solutions seem to fix my problem.
I have the GT-N7100. Unlocked, not rooted & standard factory ROM.
When I connect it to my PC (Win7-64) via USB, it is not recognised at all. It charges, but the PC won`t recognise it.
I have installed and uninstalled Kies twice.
I have installed and uninstalled the device drivers twice.
I have tried different USB cables, different USB ports and different PCs - same issue every time.
Please help!
NotSellingHats said:
I have read lots of threads in this forum but no solutions seem to fix my problem.
I have the GT-N7100. Unlocked, not rooted & standard factory ROM.
When I connect it to my PC (Win7-64) via USB, it is not recognised at all. It charges, but the PC won`t recognise it.
I have installed and uninstalled Kies twice.
I have installed and uninstalled the device drivers twice.
I have tried different USB cables, different USB ports and different PCs - same issue every time.
Please help!
Click to expand...
Click to collapse
try enabling/disabling usb debugging or developer options altogether if it is still not fixed then
try reflashing stock rom. maybe some modification you did and don't remember.
UtkarshGupta said:
... maybe some modification you did and don't remember.
Click to expand...
Click to collapse
That's what I'm thinking too. I might have to do a factory reset rather than re-flash though - it's a viscious circle - the PC won't recognise the device so I can re-flash ROM
I was trying to avoid this course of action though :crying:
Does anyone else have other suggestions before I do this?
(BTW, I did try enabling/disabling debugging already)
OK, so I eventually got too frustrated and did a full factory reset ... my PC (or KIES) still won't see the Note 2?
Anyone....????
Get a different kernel.
Sent From Samsung's Galaxy Note II Using Internet
UtkarshGupta said:
Get a different kernel.
Sent From Samsung's Galaxy Note II Using Internet
Click to expand...
Click to collapse
Thanks for your quick reply!
How do I do that?
NotSellingHats said:
Thanks for your quick reply!
How do I do that?
Click to expand...
Click to collapse
Could be solved by changing UART mode to USB mode through code *#7284#. UART ... choose MODEM and USB choose PDA. I have found this in on xda thread. But you will probably need to do it every boot myte help tempry :fingers-crossed:
UtkarshGupta said:
Get a different kernel.
Sent From Samsung's Galaxy Note II Using Internet
Click to expand...
Click to collapse
I should probably be a bit more specific about this question... I would love to get a new kernel (and ROM, and even just root the device) but I no PC will recognise that the GN2 is connected - so Odin or anything won't run.
Any suggestions?
123hiten said:
Could be solved by changing UART mode to USB mode through code *#7284#. UART ... choose MODEM and USB choose PDA. I have found this in on xda thread. But you will probably need to do it every boot myte help tempry :fingers-crossed:
Click to expand...
Click to collapse
Thanks for this suggestion but it didn't seem to work either - UART was MODEM and USB was PDA already but I toggled them etc to try to force reset.
Ideas?
Download redpill via forums and flash iy via recovery.
If you don't have recovery get the img file from here and rename the img file to recovery.Img and flash it via mobile odin.
You don't need a pc to do stuff.
Everything can be done from phone itself.
Remember to use the latest version.
Sent from my GT-N7100 using xda app-developers app
NotSellingHats said:
I have read lots of threads in this forum but no solutions seem to fix my problem.
I have the GT-N7100. Unlocked, not rooted & standard factory ROM.
When I connect it to my PC (Win7-64) via USB, it is not recognised at all. It charges, but the PC won`t recognise it.
I have installed and uninstalled Kies twice.
I have installed and uninstalled the device drivers twice.
I have tried different USB cables, different USB ports and different PCs - same issue every time.
Please help!
Click to expand...
Click to collapse
I read that you wrote regarding kies.... "I have installed and uninstalled Kies twice."
Just do one thing , download fresh kies .exe file from official samsung site & try to instal it again on your pc !!:good:
UtkarshGupta said:
Download redpill via forums and flash iy via recovery.
If you don't have recovery get the img file from here and rename the img file to recovery.Img and flash it via mobile odin.
You don't need a pc to do stuff.
Everything can be done from phone itself.
Remember to use the latest version.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Sounds terrific - I will get Mobile Odin and give it a try.
I have one question though... my GN2 is not rooted, can I use Mobile Odin?
ketani73 said:
I read that you wrote regarding kies.... "I have installed and uninstalled Kies twice."
Just do one thing , download fresh kies .exe file from official samsung site & try to instal it again on your pc !!:good:
Click to expand...
Click to collapse
I'll give it another try. Can't hurt... maybe you know something I don't know...
NotSellingHats said:
I have read lots of threads in this forum but no solutions seem to fix my problem.
I have the GT-N7100. Unlocked, not rooted & standard factory ROM.
When I connect it to my PC (Win7-64) via USB, it is not recognised at all. It charges, but the PC won`t recognise it.
I have installed and uninstalled Kies twice.
I have installed and uninstalled the device drivers twice.
I have tried different USB cables, different USB ports and different PCs - same issue every time.
Please help!
Click to expand...
Click to collapse
Hi Mate,
This seems to me to be a driver issue. Check device manager, you might have a yellow bang there, uninstall and reinstall the driver from there.
Do get back if you need further instructions.
Cheers, Sumit
ya m8 ,y the kernel change,u said its stock so it mus b recognizd by ur pc..even wen u uninstall kies ,its better to restart an install it again..i facd this with my s2 an i removd kies fully an installd it the the main issue is the usb drivers u got to see the usb ports too were u connect cause i face prblm wen using the same port for s1,s2,gs note2 ...i use it in diff ports specially for flashing ,odin stuff...
Still no joy
Hi
I have still had not luck with device drivers, etc.
I have obtained Mobile Odin Pro, by I would like to clarify, the app clearly states that the device must be rooted to run. My device is not rooted - how can I root it? ( I have tried ExynosAbuse but it doesn't work). or can I do this with Mobile Odin?
Thanks for your help.
Theres a software called mobilego. Try installing it cand connect your phone. If it identifies your phone u can atleast take a back up. I had the same problem with a S2 i was using couple of months back. Never got it connected thru kies.
http://www.wondershare.com/android-manager/
UtkarshGupta said:
Download redpill via forums and flash iy via recovery.
If you don't have recovery get the img file from here and rename the img file to recovery.Img and flash it via mobile odin.
You don't need a pc to do stuff.
Everything can be done from phone itself.
Remember to use the latest version.
Click to expand...
Click to collapse
I'm sorry for such a newb question, but could you please provide more details about how to do this. :fingers-crossed:
NotSellingHats said:
I'm sorry for such a newb question, but could you please provide more details about how to do this. :fingers-crossed:
Click to expand...
Click to collapse
Omg I just told the whole procedure. Please specify what you want understand.
this is XXXDDDAAA
I am missing something here?
If one don't have root and unable to connect to PC how mobile odin will work?
It needs root, and somewhere I read exynose abuse not worked. So there is no chance.
@OP
Try cleaning usb socket in device. Remove battery and clean usb socket very carefully, i have seen few cases where charging can be oossible but still unable to get connect to PC due to faulty socket. Otherwise go to service centre and ask them to check for same.
Sent from my GT-N7100 using xda premium

Help with connecting me tablet to pc

Hello,
I was wondering if someone could help me connect my sm-t230nu to my PC. Yes usb debugging is on and such but it is still not detected.
Sorry if this a really newbie thing to ask, well i am a noob so
Thanks in advance!
Have you installed Samsung Kies? If not install it, it will install all necessary drivers.
Sent from my SM-910C
Barbarian-King said:
Have you installed Samsung Kies? If not install it, it will install all necessary drivers.
Sent from my SM-910C
Click to expand...
Click to collapse
Still does not recognize my device :/

GT-i9192 Not responding with Odin ...

Hi Guys
I need install custom Rom for my device GT-i9192 by odin .. But Not responding
Even open files are not responding
Knowing that I tried other devices and worked without problems
Just my device.
When connect it to my computer. Not responding
Please reply ,,,
Please help me ...
azoga said:
Hi Guys
I need install custom Rom for my device GT-i9192 by odin .. But Not responding
Even open files are not responding
Knowing that I tried other devices and worked without problems
Just my device.
When connect it to my computer. Not responding
Please reply ,,,
Please help me ...
Click to expand...
Click to collapse
probably a usb driver issue, download latest and reinstall
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
IronRoo said:
probably a usb driver issue, download latest and reinstall
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Click to expand...
Click to collapse
My brother tried another device... No problems connecting with PC ..
I think the problem is on my device GT-I9192 ..
azoga said:
My brother tried another device... No problems connecting with PC ..
I think the problem is on my device GT-I9192 ..
Click to expand...
Click to collapse
possible could still be driver.
However there are lots of things it could be, I can't remember them all soul here are random things I recall, no particular order! People have reported using different usb cable, or usb port (your phone may be more sensitive than your bothers) have helped. And/or try older ver of Odin (2.8 or 2.9 I think it was). Make sure to turn off Kies & your fire wall. Only connect phone once in download mode. Turn off debugging. Update uninstall Kies (might need to reinstall drivers if they come with Kies)
(try Heimdall if you can use linux)
Also, what recovery are you using? TWRP from neozone thread? ver?

Categories

Resources